Search NASA⌕ Search

SEARCH · Search NASA

Results for “Oxide Phase Formation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Oxidation Kinetics of Cast TiAl3

The isothermal oxidation kinetics of the TiAl3 compound over a wide temperature range is documented, and these rates are related to exclusive alpha-Al2O3 scale growth. The specific weight change vs time curves are shown. Two abnormalities are immediately apparent. One is that a rapid initial uptake of oxygen occurs at times less than 5 h, followed by a lower oxidation rate at longer times, for tests at 900 C and below. The other is that the final weight changes for the 700, 800, and 900 C tests are not in the sequence expected with respect to temperature. Isothermal oxidation of drop cast TiAl above 1000 C was found to exhibit parabolic oxidation controlled by protective alpha-Al2O3 scale formation. TiAl is the only phase in the binary Ti-Al system that forms exclusive scales of alpha-Al2O3 in isothermal oxidation. High anomalous rates at short times and at temperatures below 1000 C resulted from the internal oxidation of a second phase of aluminum.

Smialek, J. L.↗

Mineralogical and chemical assessment of concrete damaged by the oxidation of sulfide-bearing aggregates: Importance of thaumasite formation on reaction mechanisms

Damages in concrete containing sulfide-bearing aggregates were recently observed in the Trois-Rivieres area (Quebec, Canada), characterized by rapid deterioration within 3 to 5 years after construction. A petrographic examination of concrete core samples was carried out using a combination of tools including: stereomicroscopic evaluation, polarized light microscopy, scanning electron microscopy, X-ray diffraction and electron microprobe analysis. The aggregate used to produce concrete was an intrusive igneous rock with different metamorphism degrees and various proportions of sulfide minerals. In the rock, sulfide minerals were often surrounded by a thin layer of carbonate minerals (siderite). Secondary reaction products observed in the damaged concrete include 'rust' mineral forms (e.g. ferric oxyhydroxides such as goethite, limonite (FeO (OH) nH{sub 2}O) and ferrihydrite), gypsum, ettringite and thaumasite. In the presence of water and oxygen, pyrrhotite oxidizes to form iron oxyhydroxides and sulphuric acid. The acid then reacts with the phases of the cement paste/aggregate and provokes the formation of sulfate minerals. Understanding both mechanisms, oxidation and internal sulfate attack, is important to be able to duplicate the damaging reaction in laboratory conditions, thus allowing the development of a performance test for evaluating the potential for deleterious expansion in concrete associated with sulfide-bearing aggregates.

36 MATERIALS SCIENCE↗

Chemical structure of vanadium-based contact formation on n-AlN

We have investigated the chemical interaction between a Au/V/Al/V layer structure and n-type AlN epilayers using soft x-ray photoemission, x-ray emission spectroscopy, and atomic force microscopy. To understand the complex processes involved in this multicomponent system, we have studied the interface before and after a rapid thermal annealing step. We find the formation of a number of chemical phases at the interface, including VN, metallic vanadium, aluminum oxide, and metallic gold. An interaction mechanism for metal contact formation on the entire n-(Al,Ga)N system is proposed.

36 MATERIALS SCIENCE↗

Observations of sesquiterpenes and their oxidation products in central Amazonia during the wet and dry seasons

Biogenic volatile organic compounds (BVOCs) from the Amazon forest region represent the largest source of organic carbon emissions to the atmosphere globally. These BVOC emissions dominantly consist of volatile and intermediate-volatility terpenoid compounds that undergo chemical transformations in the atmosphere to form oxygenated condensable gases and secondary organic aerosol (SOA). We collected quartz filter samples with 12 h time resolution and performed hourly in situ measurements with a semi-volatile thermal desorption aerosol gas chromatograph (SV-TAG) at a rural site ("T3") located to the west of the urban center of Manaus, Brazil as part of the Green Ocean Amazon (GoAmazon2014/5) field campaign to measure intermediate-volatility and semi-volatile BVOCs and their oxidation products during the wet and dry seasons. We speciated and quantified 30 sesquiterpenes and 4 diterpenes with mean concentrations in the range 0.01–6.04 ng m -3 (1–670 ppqv). We estimate that sesquiterpenes contribute approximately 14 and 12 % to the total reactive loss of O 3 via reaction with isoprene or terpenes during the wet and dry seasons, respectively. This is reduced from ~50–70 % for within-canopy reactive O 3 loss attributed to the ozonolysis of highly reactive sesquiterpenes (e.g., β-caryophyllene) that are reacted away before reaching our measurement site. We further identify a suite of their oxidation products in the gas and particle phases and explore their role in biogenic SOA formation in the central Amazon region. Synthesized authentic standards were also used to quantify gas- and particle-phase oxidation products derived from β-caryophyllene. Using tracer-based scaling methods for these products, we roughly estimate that sesquiterpene oxidation contributes at least 0.4–5 % (median 1 %) of total submicron OA mass. However, this is likely a low-end estimate, as evidence for additional unaccounted sesquiterpenes and their oxidation products clearly exists. By comparing our field data to laboratory-based sesquiterpene oxidation experiments we confirm that more than 40 additional observed compounds produced through sesquiterpene oxidation are present in Amazonian SOA, warranting further efforts towards more complete quantification.

54 ENVIRONMENTAL SCIENCES↗

A study of deformation and strain induced in bulk by the oxide layers formation on a Fe-Cr-Al alloy in high-temperature liquid Pb-Bi eutectic

At elevated temperatures, heavy liquid metals and their alloys are known to create a highly corrosive environment that causes irreversible degradation of most iron-based materials. In this paper, it has been found that an appropriate concentration of oxygen in the liquid alloy can significantly reduce this issue by creating a passivating oxide scale that controls diffusion, especially if Al is present in Fe-based materials (by Al-oxide formation). However, the increase of the temperature and of oxygen content in liquid phase leads to the increase of oxygen diffusion into bulk, and to promotion of the internal Al oxidation. This can cause a strain in bulk near the oxide layer, due either to mismatch between the thermal expansion coefficients of the oxides and bulk material, or to misfit of the crystal lattices (bulk vs. oxides). This work investigates the strain induced into proximal bulk of a Fe-Cr-Al alloy by oxide layers formation in liquid lead-bismuth eutectic utilizing synchrotron X-ray Laue microdiffraction. Finally, it is found that internal oxidation is the most likely cause for the strain in the metal rather than thermal expansion mismatch as a two-layer problem.

36 MATERIALS SCIENCE↗

Solventless, Ambient-Pressure Production of Bio-Based Lactones Over Earth-Abundant, Mixed Metal Oxide Catalysts for Circular Polyesters

Transitioning to a circular plastics economy will require use of renewable feedstocks, energy-efficient processes, and closed-loop recyclable polymers, such as polyesters. A key challenge lies in sustainably sourcing monomers used to make recyclable polyesters. This work presents a catalytic platform utilizing earth-abundant Cu(x)Ca(1-x)O mixed metal oxides for the oxidative dehydrocyclization of bio-based diols to lactones, which are advantaged for energy-efficient ring-opening polymerization. Operating below 200 degrees C, at ambient pressure, and without solvent, the process uses air as the sole oxidant, achieving high yields of lactones across a broad substrate scope of C4-8 diols in the liquid phase. The oxidative dehydrocyclization reaction is thermodynamically downhill due to water formation and energy-efficient compared to incumbent, non-redox pathways utilized in fossil carbon-based industrial processes for lactone production. Mechanistic studies reveal facile redox cycling of Cu2+-O(Ca2+)-Cu2+ interfacial sites unique to the developed catalyst. Techno-economic analysis and life cycle assessment estimate 40% lower energy demand and 15% lower GHG intensity per mass of butyrolactone produced compared to the fossil carbon-based route. Liquid-phase oxidative dehydrocyclization offers a promising approach for scalable lactone production from renewable, bio-based diols to enable circular polyesters.

36 MATERIALS SCIENCE↗

Mechanically Activated Combustion Synthesis of MoSi 2 -Based Composites

The thermal efficiency of gas-turbine power plants could be dramatically increased by the development of new structural materials based on molybdenum silicides and borosilicides, which can operate at temperatures higher than 1300 °C with no need for cooling. A major challenge, however, is to simultaneously achieve high oxidation resistance and acceptable mechanical properties at high temperatures. One approach is based on the fabrication of MoSi2-Mo5Si3 composites that combine high oxidation resistance of MoSi2 and good mechanical properties of Mo5Si3. Another approach involves the addition of boron to Mo-rich silicides for improving their oxidation resistance through the formation of a borosilicate surface layer. In particular, materials based on Mo5SiB2 phase are promising materials that offer favorable combinations of high temperature mechanical properties and oxidation resistance. However, the synthesis of Mo-Si-B multi-phase alloys is difficult because of their extremely high melting temperatures. Mechanical alloying has been considered as a promising method, but it requires long milling times, leading to large energy consumption and contamination of the product by grinding media. In the reported work, MoSi2-Mo5Si3 composites and several materials based on Mo5SiB2 phase have been obtained by mechanically activated self-propagating high-temperature synthesis (MASHS). Short-term milling of Mo/Si mixture in a planetary mill has enabled a self-sustained propagation of the combustion front over the mixture pellet, leading to the formation of MoSi2-T1 composites. Combustion of Mo/Si/B mixtures for the formation of T2 phase becomes possible if the composition is designed for the addition of more exothermic reactions leading to the formation of MoB, TiC, or TiB2. Upon ignition, Mo/Si/B and Mo/Si/B/Ti mixtures exhibited spin combustion, but the products were porous, contained undesired secondary phases, and had low oxidation resistance. It has been shown that use of SHS compaction (quasi-isostatic pressing after combustion) significantly improves oxidation resistance of the obtained MoSi2-Mo5Si3 composites. The “chemical oven” technique has been successfully employed to fabricate low-porous Mo5SiB2–TiC, Mo5SiB2–TiB2, and Mo–Mo5SiB2–Mo3Si materials. Among them, Mo5SiB2–TiB2 material possesses good mechanical properties and simultaneously exhibits excellent oxidation resistance at temperatures up to 1500 °C.

36 MATERIALS SCIENCE↗

Rapid Oxidation of Uranium Steel Alloys: Combustion Synthesis

This project explored the use of combustion synthesis as a rapid, high-temperature method for oxidizing uranium-bearing steel alloys. Traditional laboratory-scale synthesis methods often fail to replicate the thermal and kinetic conditions experienced by real-world particulates, particularly those formed under rapid quenching or high-temperature scenarios. Combustion synthesis offers a promising alternative by enabling fast, localized heating and flexible precursor selection. A series of targeted experiments were conducted using a U 2 NiCrFe 4 alloy as the precursor. The alloy was oxidized using combustion synthesis reactions fueled by uranyl nitrate and glycine, achieving peak temperatures exceeding 1,200 °C. Postreaction analysis using scanning electron microscopy (SEM), elemental mapping, and Raman spectroscopy revealed the formation of iron-based oxides, with limited but detectable evidence of uranium oxide phases such as UO 2 . The results indicate that under the rapid reaction and cooling conditions of combustion synthesis, iron oxides form preferentially, but uranium oxide formation is kinetically limited. These findings validate combustion synthesis as a viable method for simulating the oxidation behavior of uranium steels in extreme environments and lay the groundwork for future studies aimed at enhancing uranium oxide formation through higher temperatures or modified precursor compositions.

36 MATERIALS SCIENCE↗

Containerless Processing of Advanced Glasses

Report describes investigation of containerless processing of glass, conducted in preparation of gravity-free processing experiments on board Space Shuttle. 105 candidate glass materials screened. Large number of oxide proportions studied and ternary phase diagram of glass formation developed as result.

Happe, R.↗

Fluorine-Substituted Lithium Chloride Solid Electrolytes for High-Voltage All-Solid-State Lithium-Ion Batteries

Lithium ternary halides are promising solid electrolytes, owing to their high ionic conductivity and reasonably high oxidative and chemical stability. Recently, fluorine substitution in Li 3 MCl 6 has been suggested as a promising approach for further enhancing oxidation stability. Accordingly, this study outlines a material design strategy for F-substituted Li 3 MCl 6 through systematic theoretical analyses. Calculations reveal that the mixing limit of F in Li 3 MCl 6–x F x is in the range of 0.5–1.5, and the resulting Li 3 MCl 6–x F x phases can retain ionic conductivity above 1 mS/cm up to x = 1.0. Additionally, the calculations also predict that the formation of F-containing passivating phases could increase the oxidation potential for Li3MCl5F to ~6.3 V. The proposed material design strategy is validated through the synthesis of Li 3 YCl 5 F, which is confirmed to show both high ionic conductivity and enhanced oxidation stability. The design guidelines presented herein can accelerate the potential use of halide-based electrolyte chemistries in high-voltage all-solid-state batteries.

25 ENERGY STORAGE↗

Oxide nucleation via threshold-driven volume instability in Ni oxidation

Oxide nucleation dictates the onset of metal oxidation, yet the atomistic pathways bridging initial oxygen adsorption to bulk phase transformation remain elusive. Here, we utilize in-situ atomic-resolution imaging to directly capture the nucleation of nickel oxide, revealing a threshold-driven, cooperative transformation of Ni into NiO. Our observations identify a distinct incubation period during which oxygen progressively accumulates in subsurface layers. Once a critical concentration and penetration depth are reached, a collective lattice reconfiguration is triggered, abruptly converting multiple Ni layers into NiO. Atomistic simulations corroborate this mechanism, identifying a cooperative lattice instability induced by subsurface oxygen saturation. These results establish subsurface oxygen incorporation as the missing mechanistic link between surface adsorption and three-dimensional oxide formation, providing an atomistic framework to understand and control reactive phase transformations in materials synthesis, catalysis, and degradation.

36 MATERIALS SCIENCE↗

The energetics of lanthanum tantalate materials

Lanthanum tantalates are important refractory materials with application in photocatalysis, solid oxide fuel cells, and phosphors. Soft-chemical synthesis utilizing the Lindqvist ion, [Ta{sub 6}O{sub 19}]{sup 8-}, has yielded a new phase, La{sub 2}Ta{sub 2}O{sub 7}(OH){sub 2}. Using the hydrated phase as a starting material, a new lanthanum orthotantalate polymorph was formed by heating to 850 {sup o}C, which converts to a previously reported LaTaO{sub 4} polymorph at 1200 {sup o}C. The stabilities of La{sub 2}Ta{sub 2}O{sub 7}(OH){sub 2} (LaTa-OH), the intermediate LaTaO{sub 4} polymorph (LaTa-850), and the high temperature phase (LaTa-1200) were investigated using high-temperature oxide melt solution calorimetry. The enthalpy of formation from the oxides were calculated from the enthalpies of drop solution to be -87.1{+-}9.6, -94.9{+-}8.8, and -93.1{+-}8.7 kJ/mol for LaTa-OH, LaTa-850, and LaTa-1200, respectively. These results indicate that the intermediate phase, LaTa-850, is the most stable. This pattern of energetics may be related to cation-cation repulsion of the tantalate cations. We also investigated possible LnTaO{sub 4} and Ln{sub 2}Ta{sub 2}O{sub 7}(OH){sub 2} analogues of Ln=Pr, Nd to examine the relationship between cation size and the resulting phases. - Graphical abstract: The energetics of three lanthanum tantalates were investigated by the high-temperature oxide melt solution calorimetry. The enthalpies of formation from the oxides were calculated from the enthalpies of drop solution to be -87.1{+-}9.6, -94.9{+-}8.8, and -93.1{+-}8.7 kJ/mol for La{sub 2}Ta{sub 2}O{sub 7}(OH){sub 2}, LaTaO{sub 4} (850 {sup o}C), and LaTaO{sub 4} (1200 {sup o}C), respectively. These results indicate that the intermediate phase, LaTaO{sub 4} (850 {sup o}C), is the most stable in energy. Display Omitted

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

LaCrO3 heteroepitaxy on SrTiO3(001) by molecular beam epitaxy

Stoichiometric, epitaxial LaCrO3 films have been grown on TiO2-terminated SrTiO3(001) substrates by molecular beam epitaxy using O2 as the oxidant. Film growth occurred in a layer-by-layer fashion, giving rise to structurally excellent films and surfaces which preserve the step-terrace structure of the substrate. The critical thickness is in excess of 500 Å. Near-surface Cr(III) is highly susceptible to further oxidation to Cr(V), leading to the formation of a disordered phase upon exposure to atomic oxygen. Recovery of the original epitaxial LaCrO3 phase is readily achieved by vacuum annealing.

36 MATERIALS SCIENCE↗

The nanosphere iron mineral(s) in Mars soil

A series of surface-modified clays containing nanophase (np) iron/oxyhydroxides of extremely small particle sizes, with total iron contents as high as found in Mars soil, were prepared by iron deposition on the clay surface from ferrous chloride solution. Comprehensive studies of the iron mineralogy in these 'Mars-soil analogs' were conducted using chemical extractions, solubility analyses, pH and redox, x ray and electron diffractometry, electron microscopic imaging specific surface area and particle size determinations, differential thermal analyses, magnetic properties characterization, spectral reflectance, and Viking biology simulation experiments. The clay matrix and the procedure used for synthesis produced nanophase iron oxides containing a certain proportion of divalent iron, which slowly converts to more stable, fully oxidized iron minerals. The noncrystalline nature of the iron compounds precipitated on the surface of the clay was verified by their complete extractability in oxalate. Lepidocrocite (gamma-FeOOH) was detected by selected area electron diffraction. It is formed from a double iron Fe(II)/Fe(III) hydroxyl mineral such as 'green rust', or ferrosic hydroxide. Magnetic measurements suggested that lepidocrocite converted to the more stable meaghemite (gamma-Fe203) by mild heat treatment and then to nanophase hematite (aplha-Fe203) by extensive heat treatment. Their chemical reactivity offers a plausible mechanism for the somewhat puzzling observations of the Viking biology experiments. Their unique chemical reactivities are attributed to the combined catalytic effects of the iron oxide/oxyhydroxide and silicate phase surfaces. The mode of formation of these (nanophase) iron oxides on Mars is still unknown.

Banin, A.↗

The formation of the complex manganites LnSr{sub 2}Mn{sub 2}O{sub 7} (Ln = La, Nd, Gd)

Graphical abstract: Display Omitted Highlights: ► Formation of the LnSr{sub 2}Mn{sub 2}O{sub 7} phases proceeds according to two different pathways. ► Cationic composition of the obtained phase depends on the formation pathway. ► Step-by-step synthesis allows obtaining single-phase material. ► Structure and magnetic properties of the single-phase NdSr{sub 2}Mn{sub 2}O{sub 7} were investigated. -- Abstract: The process of formation of the Ruddlesden–Popper phases LnSr{sub 2}Mn{sub 2}O{sub 7} (Ln = La, Nd, Gd) was investigated by means of X-ray diffraction, thermal analysis and microprobe analysis. Two parallel pathways were found for the reaction. The first one includes the formation of the intermediate K{sub 2}NiF{sub 4}-type compound by interaction of Sr{sub 7}Mn{sub 4}O{sub 15} and perovskite-type solid solution (Ln,Sr)MnO{sub 3}, while in the second one the K{sub 2}NiF{sub 4}-type intermediate is formed during the reaction of the same perovskite-type solid solution with the corresponding rare earth oxide. This result gives an explanation for the formation of two phases with slightly different cationic compositions. The kinetics of the reaction was investigated for both mechanisms resulting in determination of their relative contribution to the final composition. Pure NdSr{sub 2}Mn{sub 2}O{sub 7} was obtained using a step-by-step process according to the first mechanism, and the magnetic properties of this phase were investigated.

36 MATERIALS SCIENCE↗

Decomposition of the molecular precursor Bu{sub 4}Sn{sub 6}S{sub 6} on the surface of TiO{sub 2} to prepare semiconductor composite photocatalysts

In this work, the single source organometallic precursor Bu{sub 4}Sn{sub 6}S{sub 6} was impregnated and decomposed on the surface of TiO{sub 2} to produce semiconductor composites. {sup 119}Sn Moessbauer, Raman and ultra violet/visible spectroscopies, powder X-ray diffraction, temperature programmed reduction and surface area suggest for Sn contents of 1, 5 and 10 wt%, the formation of a highly dispersed unstable SnS phase which is readily oxidized by air at room temperature to form SnO{sub 2} on the TiO{sub 2} surface. The composite with Sn 30 wt% produced a mixture with the phases SnS/{gamma}-Sn{sub 2}S{sub 3} and SnO{sub 2}. Photocatalytic experiments with the composites SnX{sub n}/TiO{sub 2} using the textile dye Drimaren red as a probe molecule showed a first-order reaction with rate constants k{sub absorbance} for the composites with Sn 1 and 5% higher than pure TiO{sub 2} which was explained by the formation of the more active photocatalyst composite SnO{sub 2}/TiO{sub 2}.

36 MATERIALS SCIENCE↗

Exploration of alloy 441 chemistry for solid oxide fuel cell interconnect application

Alloy 441 stainless steel (UNS S 44100) is being considered for application as an SOFC interconnect material. There are several advantages to the selection of this alloy over other iron-based or nickel-based alloys: first and foremost alloy 441ss is a production alloy which is both low in cost and readily available. Second, the coefficient of thermal expansion (CTE) more closely matches the CTE of the adjoining ceramic components of the fuel cell. Third, this alloy forms the Laves phase at typical SOFC operating temperatures of 600–800 °C. It is thought that the Laves phase preferentially consumes the Si present in the alloy microstructure. As a result it has been postulated that the long-term area specific resistance (ASR) performance degradation often seen with other ferritic stainless steels, which is associated with the formation of electrically resistive Si-rich oxide subscales, may be avoidable with alloy 441ss. In this paper we explore the physical metallurgy of alloy 441, combining computational thermodynamics with experimental verification, and discuss the results with regards to Laves phase formation under SOFC operating conditions. We show that the incorporation of the Laves phase into the microstructure cannot in itself remove sufficient Si from the ferritic matrix in order to completely avoid the formation of Si-rich oxide subscales. Finally, however, the thickness, morphology, and continuity of the Si-rich subscale that forms in this alloy is modified in comparison to non-Laves forming ferritic stainless steel alloys and therefore may not be as detrimental to long-term SOFC performance.

SOFC Interconnect Oxidation Ferritic steel Laves S↗