SEARCH · Search NASA

Results for “PILOT SELECTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

All sources NASA NTRS DOE OSTI

NASA NTRS1976

Evaluation of ball and roller bearings restored by grinding

The restoration by grinding of those rolling element bearings which are currently being discarded at aircaft engine and transmission overhaul is considered. Three bearing types were selected from the UH-1 helicopter engine and transmission for the pilot program. Groups of each of these bearings were visually and dimensionally inspected for suitability for restoration. A total of 250 bearings were restored by grinding. Of this number, 30 bearings from each type were endurance tested to a TBO of 1600 hours. No bearing failures occurred related to the restoration by grinding process. The two bearing failures which occurred were due to defective rolling elements and were typical of those which may occur in new bearings. The restorable component yield to the three groups was in excess of 90 percent.

Parker, R. J.↗

NASA NTRS1976

Development of an active fly-by-wire flight control system

A summary of the YF-16 flight control system is presented. The basic functions of the flight control system are discussed, as well as the unique features such as Relaxed Static Longitudinal Stability (RSS), Fly By Wire (FBW), and Side Stick Pilot's Controller (SSC). In addition, the basic philosophy behind the selection of the flight control system functions and unique features is discussed.

Anderson, C. A.↗

NASA NTRS1983

The NASA Aviation Safety Reporting System

This is the fourteenth in a series of reports based on safety-related incidents submitted to the NASA Aviation Safety Reporting System by pilots, controllers, and, occasionally, other participants in the National Aviation System (refs. 1-13). ASRS operates under a memorandum of agreement between the National Aviation and Space Administration and the Federal Aviation Administration. The report contains, first, a special study prepared by the ASRS Office Staff, of pilot- and controller-submitted reports related to the perceived operation of the ATC system since the 1981 walkout of the controllers' labor organization. Next is a research paper analyzing incidents occurring while single-pilot crews were conducting IFR flights. A third section presents a selection of Alert Bulletins issued by ASRS, with the responses they have elicited from FAA and others concerned. Finally, the report contains a list of publications produced by ASRS with instructions for obtaining them.

Source record↗

NASA NTRS1989

Avoiding a maneuvering aircraft with TCAS

The present investigation was carried out in NASA's Man-Vehicle Systems Research Facility B 727 simulator because of the need for veridical aircraft response. Pilot performance was measured in testing TCAS II after an avoidance maneuver has been initiated. A proposed change to the system will cause the TCAS II to issue a subsequent maneuver. This maneuver may be an increase in climb or descent rate from 1500 to 2500 ft/min, or a change from a climb to a descent or a descent to a climb. Three questions were addressed: (1) can the pilot detect the change in the maneuver advisory, (2) can the pilot respond promptly and accurately to the new advisory, and (3) can the maneuver be performed in the normal operating envelope of the aircraft. The reaction times found in the study suggest that pilots are able to respond within the two seconds targeted by the TCAS logic. The pilot performance data were used to modify the TCAS II logic to reflect actual pilot performance. This will result in a safe and appropriate maneuver selection in the rare instance when the conflicting aircraft maneuvers, and by doing so invalidates the initial maneuver issued by the collision avoidance system.

Chappell, Sheryl L.↗

NASA NTRS2006

Effectively Transforming IMC Flight into VMC Flight: An SVS Case Study

A flight-test experiment was conducted using the NASA LaRC Cessna 206 aircraft. Four primary flight and navigation display concepts, including baseline and Synthetic Vision System (SVS) concepts, were evaluated in the local area of Roanoke Virginia Airport, flying visual and instrument approach procedures. A total of 19 pilots, from 3 pilot groups reflecting the diverse piloting skills of the GA population, served as evaluation pilots. Multi-variable Discriminant Analysis was applied to three carefully selected and markedly different operating conditions with conventional instrumentation to provide an extension of traditional analysis methods as well as provide an assessment of the effectiveness of SVS displays to effectively transform IMC flight into VMC flight.

Glaab, Louis J.↗

NASA NTRSDate not supplied

Science Utilizing Data from Spire Global as Part of the NASA Commercial SmallSat Data Acquisition (CSDA) Program

As part of the Commercial SmallSat Data Acquisition (CSDA) Program, NASA has evaluated data from Spire Global, Inc. and subsequently established a sustained purchase agreement with them. The primary goal of this agreement is to acquire and make available Spire datasets to the research community with the aim of enhancing the science objectives through the Earth Science Division (ESD), though there are noted applications to the NASA Heliophysics Division as well. This talk will present the data access details and holdings of Spire data by the CSDA Program, including those from radio occultation and reflectometry. It will also present selected scientific results and applications of these data from both the pilot evaluation and the sustained purchase stages to highlight their use within the ESD research portfolio.

Wil McCarty↗

NASA NTRS1994

The selective use of functional optical variables in the control of forward speed

Previous work on the perception and control of simulated vehicle speed has examined the contributions of optical flow rate (angular visual speed) and texture, or edge rate (frequency of passing terrain objects or markings) on the perception and control of forward speed. However, these studies have not examined the ability to selectively use edge rate or flow rate. The two studies presented here show that this ability is far greater for pilots than non-pilots, as would be expected since pilots must control vehicular speed over a variety of altitudes where flow rates change independently of forward speed. These studies also show that this ability to selectively use these variables is linked to the visual contextual information about the relative validity (linkage with speed) of the two variables. Subjective judgment data also indicated that awareness of altitude and ground texture density did not mediate ground speed awareness.

Johnson, Walter W.↗

NASA NTRS2014

Level of Automation and Failure Frequency Effects on Simulated Lunar Lander Performance

A human-in-the-loop experiment was conducted at the NASA Ames Research Center Vertical Motion Simulator, where instrument-rated pilots completed a simulated terminal descent phase of a lunar landing. Ten pilots participated in a 2 x 2 mixed design experiment, with level of automation as the within-subjects factor and failure frequency as the between subjects factor. The two evaluated levels of automation were high (fully automated landing) and low (manual controlled landing). During test trials, participants were exposed to either a high number of failures (75% failure frequency) or low number of failures (25% failure frequency). In order to investigate the pilots' sensitivity to changes in levels of automation and failure frequency, the dependent measure selected for this experiment was accuracy of failure diagnosis, from which D Prime and Decision Criterion were derived. For each of the dependent measures, no significant difference was found for level of automation and no significant interaction was detected between level of automation and failure frequency. A significant effect was identified for failure frequency suggesting failure frequency has a significant effect on pilots' sensitivity to failure detection and diagnosis. Participants were more likely to correctly identify and diagnose failures if they experienced the higher levels of failures, regardless of level of automation

performance↗

NASA NTRS1984

Peripheral vision horizon display testing in RF-4C aircraft

A test program to assess the capability of the peripheral vision horizon display (PVHD) to provide peripheral attitude cues to the pilot is described. The system was installed in the rear cockpit of a RF-4C aircraft, selected because its poor instrument crosscheck conditions. The PVHD test plan was designed to assess three primary areas: (1) ability of the system to reduce spatial disorientation; (2) ability of the system to aid the pilot in recovering from unusual attitudes; and (3) improvement in pilot performance during instrument landing system (ILS) approaches. Results of preliminary test flights are summarized. The major problem areas concern the distinction of the display itself and the capability of the display to provide pitch motion cues.

Hammond, L. B., Jr.↗

NASA NTRS1987

Implementation and flight-test of a multi-mode rotorcraft flight-control system for single-pilot use in poor visibility

A flight investigation was conducted to evaluate a multi-mode flight control system designed according to the most recent recommendations for handling qualities criteria for new military helicopters. The modes and capabilities that were included in the system are those considered necessary to permit divided-attention (single-pilot) lowspeed and hover operations near the ground in poor visibility conditions. Design features included mode-selection and mode-blending logic, the use of an automatic position-hold mode that employed precision measurements of aircraft position, and a hover display which permitted manually-controlled hover flight tasks in simulated instrument conditions. Pilot evaluations of the system were conducted using a multi-segment evaluation task. Pilot comments concerning the use of the system are provided, and flight-test data are presented to show system performance.

Hindson, William S.↗

NASA NTRS1972

Considerations for the design of an onboard air traffic situation display

The basic concept of remoting information to the cockpit is used to design and develop a computerized airborne traffic situation display device that automatically selects and presents segments of a controller's scope to the aircraft pilot via a narrow band digital data link. These data are integrated with aircraft heading and navigation information to provide a display useful in congested air space. The display can include alphanumerical symbols, air route maps, and controller instructions.

Anderson, R. E.↗

NASA NTRS1973

Technology transfer to a developing nation, Korea

An experimental project is reported which was undertaken. to determine if selected types of technology developed for the aerospace program during the past decade are relevant to specific industrial problems of a developing nation and to test whether a structured program could facilitate the transfer of relevant technologies. The Korea Institute of Science and Technology and the IIT Research Institute were selected as the active transfer agents to participate in the program. The pilot project was based upon the approach to the transfer of domestic technology developed by the NASA Technology Utilization Division and utilized the extensive data and technical resources available through the Space Agency and its contractors. This pilot project has helped to clarify some aspects of the international technology transfer process and to upgrade Korean technological capabilities.

Stone, C. A.↗

NASA NTRS1981

Solar Power Satellite antenna phase control system hardware simulation, phase 4: Volume 1: Executive summary

The phase control system is described. Potential sources of phase error are identified and the performance leading to selection of the allowable phase error for each source is summarized. The pilot transmitter, the effects of ionospheric, the master slave returnable timing system (MSRTS), the SPS receiver, and the high power amplifier for dc to microwave conversion are considered separately. Design parameters of the pilot transmitter and spacetenna transponder are presented.

Lindsey, W. C.↗

NASA NTRS1982

Methodology for multiaircraft minimum noise impact landing trajectories

The problem of optimizing landing trajectories with respect to noise impact index is addressed. In contrast with previous work, multilandings are considered. In order to make the problem tractable the trajectories are specified in functional form with certain parameters left free for selection by the optimization methods. Constraint of aircraft dynamic behavior, trajectory separation, pilot workload, passenger comfort, and maximum noise intensity all enter into the determination of what is an allowable trajectory. A version of the quasi-Newton iterative procedure is used to determine the optimum parameter values. The results show improvement in noise impact to the airport considered and the potential for even greater improvement at many airports.

Cook, G.↗

NASA NTRS1986

Flight testing TECS - The Total Energy Control System

This paper describes some of the unique features of an integrated throttle-elevator control law known as the Total Energy Control System (TECS) which has been flight tested on NASA Langley's Transport Systems Research Vehicle. The TECS concept is designed around total energy principles. It utilizes a full-time autothrottle to control the total energy of the aircraft and the elevator to distribute the energy between speed and flight path objectives. Time histories of selected parameters generated from flight data are used to illustrate the pilot-like control strategy of the system and the priority logic employed when throttle limiting is encountered.

Kelly, James R.↗

NASA NTRS1993

Anthropometric survey of the astronaut applicants and astronauts from 1985 to 1991

The Anthropometry and Biomechanics Laboratory at the Johnson Space Center has been collecting anthropometric data from astronaut applicants since 1977. These anthropometric measurements had been taken from 473 applicants. Based on the position they applied for, these applicants were classified as either mission specialists, payload specialists, pilots, or observers. The main objective was to document the variations among these applicants and tabulate the percentile data for each anthropometric dimension. The percentile and the descriptive statistics data were tabulated and graphed for the whole astronaut candidate population; for the male and female groups; for each subject classification such as pilot, mission specialist, and payload specialist; and finally, for those who were selected as astronauts.

Rajulu, Sudhakar L.↗

NASA NTRS1981

Aircraft control-display analysis and design using the optimal control model of the human pilot

The use of the optimal control model (OCM) of the human pilot as a design tool is discussed. A novel procedure for the assignment and selection of model parameters in the absence of experimental data is proposed. A technique for partitioning a weakly coupled, multiaxis task into approximate state-uncoupled, single-axis tasks is introduced. The resulting modeling technique is utilized in the design and analysis of an aircraft flight-director system. This flight-director design technique differs from previous related work using the OCM in that considerable effort is devoted to ensuring that the OCM-designed director exhibits the desirable frequency-domain characteristics associated with experimentally verified classical designs (e.g., K/s 'effective vehicle' characteristics, noninteracting controls). The implications of the technique in the design of automatic flight control systems which employ the human pilot as a performance assessor and failure detector are briefly discussed.

Hess, R. A.↗

NASA NTRS1993

Starburst Galaxies: Hard X-ray spectra and contribution to the diffuse background

During the period of this grant two main tasks were performed: a determination of a selection criterion for starburst galaxies most likely to emit X-rays, and performance of a pilot study of the X-ray emission from nine such systems. Starburst galaxies may be expected to emit flat-spectrum X-ray at energies above 10 keV resulting from the various remnants of the short-lived massive stars which characterize the starburst. The investigation to determine the optimum sample resulted in a change from an X-ray selected (HEAO-2) sample to infrared selection based on the IRAS catalogue. A much broader sample thereby available for study, and selection could be limited to only the nearest objects and still obtain a reasonably large sample. A sample of 99 of the brightest infrared starburst galaxies was settled on for the X-ray survey. For a set of practical size, this was then reduced to a subset of 53, based on luminosity and nearness. X-ray emission from these objects was individually measured from the UCSD HEAO-1 all-sky survey in four energy bands between 13 keV to 160 keV. This data base consists of about 20 optical disk volumes. Net significance for the result was roughly two sigma, and a very hard spectral shape is indicated for the net spectrum of the surveyed galaxies. With the possibility of detection of the class, it was then felt worthwhile to examine fluxes from these sources in other archival data. This was performed with the HEAO-1 A2 data and the HEAO-2 (EINSTEIN) main archive and slew survey. Positive results were also obtained for the sample, but again at weak significance. With three independent measures of weak X-ray fluxes from nearby starburst galaxies, we wrote a letter to the Astrophysical Journal (enclosed) discussing these results and their likely significance, in particular, for the contribution to the cosmic diffuse x-ray background, perhaps as much as 25 percent.

Gruber, Duane E.↗