Broadband Absorption Enhancement in Solar Cells with an Atomically Thin Active Layer
Not Available
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
The interface electronic structure of a bilayer heterojunction of C{sub 60} and three different phthalocyanines grown on indium tin oxide (ITO) has been studied using synchrotron radiation-excited photoelectron spectroscopy. The energy difference between the highest occupied molecular orbital level of the phthalocyanine (donor) layer and the lowest unoccupied molecular orbital level of the C{sub 60} (acceptor) layer (E{sub HOMO}{sup D} - E{sub LUMO}{sup A}) was determined. The E{sub HOMO}{sup D} - E{sub LUMO}{sup A} of a heterojunction with boron subphthalocyanine chloride (SubPc) was found to be much larger than those of copper phthalocyanine (CuPc) and chloro-aluminum phthalocyanine (ClAlPc). This observation is discussed in terms of the difference of the ionization energy of each donor material. Additionally, we have studied the molecular orientation of the phthalocyanine films on ITO using angle-dependent X-ray absorption spectroscopy. We found that the SubPc films showed significant disorder compared to the CuPc and ClAlPc films and also found that E{sub HOMO}{sup D} - E{sub LUMO}{sup A} varied with the orientation of the ClAlPc molecules relative to the ITO substrate. This orientation could be controlled by varying the ClAlPc deposition rate.
Explore the source record for details and available documents.
A new resource makes it easier for researchers to explore predictions of how melting permafrost might affect carbon release, wetlands, and river deltas as they evolve and other interacting effects.
Abstract Long‐term measurements at the Mauna Loa Observatory (MLO) show that the CO 2 seasonal cycle amplitude (SCA) increased from 1959 to 2019 at an overall rate of 0.22 0.034 ppm decade −1 while also varying on interannual to decadal time scales. These SCA changes are a signature of changes in land ecological CO 2 fluxes as well as shifting winds. Simulations with the TM3 tracer transport model and CO 2 fluxes from the Jena CarboScope CO 2 Inversion suggest that shifting winds alone have contributed to a decrease in SCA of −0.10 0.022 ppm decade −1 from 1959 to 2019, partly offsetting the observed long‐term SCA increase associated with enhanced ecosystem net primary production. According to these simulations and MIROC‐ACTM simulations, the shorter‐term variability of MLO SCA is nearly equally driven by varying ecological CO 2 fluxes (49%) and varying winds (51%). We also show that the MLO SCA is strongly correlated with the Pacific Decadal Oscillation (PDO) due to varying winds, as well as with a closely related wind index (U‐PDO). Since 1980, 44% of the wind‐driven SCA decrease has been tied to a secular trend in the U‐PDO, which is associated with a progressive weakening of westerly winds at 700 mbar over the central Pacific from 20°N to 40°N. Similar impacts of varying winds on the SCA are seen in simulations at other low‐latitude Pacific stations, illustrating the difficulty of constraining trend and variability of land CO 2 fluxes using observations from low latitudes due to the complexity of circulation changes.
Abstract Nitrogen has been proposed to be stored within planetary cores, but its effects on the structure and density of molten Fe–alloys have not been explored experimentally. Using energy‐dispersive X‐ray diffraction, we determined the structure of Fe–N(–C) liquids at core conditions (1–7 GPa and 1700–1900°C) within a Paris‐Edinburgh press. Variation of N up to 7 wt.% and C up to 1.5 wt.% results in near‐linear changes in Fe–Fe atom distances and structure factor with increasing light element content. We did not observe a significant pressure‐driven structural transition in Fe–N(–C) liquids. We model the expansion of the Fe–Fe bonds using a modified Birch‐Murnaghan equation of state. With this model, we demonstrate that N or C contamination could lead to an overestimation of the Fe–Fe distances of pure Fe. We observe that the incorporation of 1 wt.% N or C into Fe results in a change in Fe–Fe distances that is twice as significant as the effect of 1 GPa. By approximating the change in volume, we infer that N and C incorporated in liquid iron could contribute to the density deficit observed in the cores of terrestrial bodies.
The rapid insertion and extraction of Li ions from a cathode material is imperative for the functioning of a Li-ion battery. In many cathode materials such as LiCoO 2 , lithiation proceeds through solid-solution formation, whereas in other materials such as LiFePO 4 lithiation/delithiation is accompanied by a phase transition between Li-rich and Li-poor phases. We demonstrate using scanning transmission X-ray microscopy (STXM) that in individual nanowires of layered V 2 O 5 , lithiation gradients observed on Li-ion intercalation arise from electron localization and local structural polarization. Electrons localized on the V 2 O 5 framework couple to local structural distortions, giving rise to small polarons that serves as a bottleneck for further Li-ion insertion. The stabilization of this polaron impedes equilibration of charge density across the nanowire and gives rise to distinctive domains. The enhancement in charge/discharge rates for this material on nanostructuring can be attributed to circumventing challenges with charge transport from polaron formation.
Abstract Birnessite is a low-cost and environmentally friendly layered material for aqueous electrochemical energy storage; however, its storage capacity is poor due to its narrow potential window in aqueous electrolyte and low redox activity. Herein we report a sodium rich disordered birnessite (Na 0.27 MnO 2 ) for aqueous sodium-ion electrochemical storage with a much-enhanced capacity and cycling life (83 mAh g −1 after 5000 cycles in full-cell). Neutron total scattering and in situ X-ray diffraction measurements show that both structural water and the Na-rich disordered structure contribute to the improved electrochemical performance of current cathode material. Particularly, the co-deintercalation of the hydrated water and sodium-ion during the high potential charging process results in the shrinkage of interlayer distance and thus stabilizes the layered structure. Our results provide a genuine insight into how structural disordering and structural water improve sodium-ion storage in a layered electrode and open up an exciting direction for improving aqueous batteries.
X-ray absorption spectroscopy (XAS) is a widely used materials characterization technique to determine oxidation states, coordination environment, and other local atomic structure information. Analysis of XAS relies on comparison of measured spectra to reliable reference spectra. However, existing databases of XAS spectra are highly limited both in terms of the number of reference spectra available as well as the breadth of chemistry coverage. In this work, we report the development of XASdb, a large database of computed reference XAS, and an Ensemble-Learned Spectra IdEntification (ELSIE) algorithm for the matching of spectra. XASdb currently hosts more than 800,000 K-edge X-ray absorption near-edge spectra (XANES) for over 40,000 materials from the open-science Materials Project database. We discuss a high-throughput automation framework for FEFF calculations, built on robust, rigorously benchmarked parameters. FEFF is a computer program uses a real-space Green’s function approach to calculate X-ray absorption spectra. Here, we will demonstrate that the ELSIE algorithm, which combines 33 weak “learners” comprising a set of preprocessing steps and a similarity metric, can achieve up to 84.2% accuracy in identifying the correct oxidation state and coordination environment of a test set of 19 K-edge XANES spectra encompassing a diverse range of chemistries and crystal structures. The XASdb with the ELSIE algorithm has been integrated into a web application in the Materials Project, providing an important new public resource for the analysis of XAS to all materials researchers. Finally, the ELSIE algorithm itself has been made available as part of veidt, an open source machine-learning library for materials science.
The following text has been added to the Acknowledgements section: “L. F. J. P. acknowledges support from the National Science Foundation (DMREF-1627583).”
Not provided.
Not provided.
Many peptide hormones form an α-helix on binding their receptors, and sensitive methods for their detection could contribute to better clinical management of disease. De novo protein design can now generate binders with high affinity and specificity to structured proteins. However, the design of interactions between proteins and short peptides with helical propensity is an unmet challenge. Here we describe parametric generation and deep learning-based methods for designing proteins to address this challenge. We show that by extending RFdiffusion to enable binder design to flexible targets, and to refining input structure models by successive noising and denoising (partial diffusion), picomolar-affinity binders can be generated to helical peptide targets by either refining designs generated with other methods, or completely de novo starting from random noise distributions without any subsequent experimental optimization. The RFdiffusion designs enable the enrichment and subsequent detection of parathyroid hormone and glucagon by mass spectrometry, and the construction of bioluminescence-based protein biosensors. The ability to design binders to conformationally variable targets, and to optimize by partial diffusion both natural and designed proteins, should be broadly useful.
Aluminum is a common dopant across oxide cathodes for improving the bulk and cathode-electrolyte interface (CEI) stability. Aluminum in the bulk is known to enhance structural and thermal stability, yet the exact influence of aluminum at the CEI remains unclear. To address this, we utilized a combination of X-ray photoelectron and absorption spectroscopy to identify aluminum surface environments and extent of transition metal reduction for Ni-rich LiNi 0.8 Co 0.2-y Al y O 2 (0%, 5%, or 20% Al) layered oxide cathodes tested at 4.75 V under thermal stress (60 °C). For these tests, we compared the conventional LiPF6 salt with the more thermally stable LiBF 4 salt. The CEI layers are inherently different between these two electrolyte salts, particularly for the highest level of Al-doping (20%) where a thicker (thinner) CEI layer is found for LiPF 6 (LiBF 4 ). Focusing on the aluminum environment, we reveal the type of surface aluminum species are dependent on the electrolyte salt, as Al-O-F- and Al-F-like species form when using LiPF 6 and LiBF 4 , respectively. In both cases, we find cathode-electrolyte reactions drive the formation of a protective Al-F-like barrier at the CEI in Al-doped oxide cathodes.
The operation of discrete heterojunction organic photovoltaic (OPV) cells employing chloro-aluminium phthalocyanine (ClAlPc) as the electron donor and C{sub 60} as the electron acceptor is reported and the characteristics are correlated with the energy level structure of the devices determined using X-ray photoelectron spectroscopy. The results give new insight into the origin of the open circuit voltage (V{sub oc}) in discrete heterojunction OPVs. The measured V{sub oc} in this system is found to be determined by: (i) the frontier orbital energy offsets between the donor and acceptor materials, accounting for the likely formation of an abrupt vacuum level shift at the heterojunction interface and (ii) the degree of alignment between the hole-extracting electrode Fermi level and the highest occupied molecular orbital energy of the electron donor material. The generality of the findings is demonstrated by rationalising the V{sub oc} in OPVs employing the archetypal electron donor, copper phthalocyanine.
The element and orbital-specific electronic structure of thin films of the organic material N,N'-ethylene-bis(1,1,1-trifluoropentane-2,4-dioneiminato)-copper(II) (designated as Cu-TFAC) has been studied using a combination of synchrotron radiation-excited resonant X-ray emission spectroscopy, X-ray photoelectron spectroscopy, X-ray absorption spectroscopy and density functional theory calculations. Furthermore, resonant X-ray emission at the carbonK-edge was used to measure the density of states for individual C sites in the molecule.