Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA FOCUS DEVICES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

A 2D Particle in Cell model for ion extraction and focusing in electrostatic accelerators

Negative ions are fundamental to produce intense and high energy neutral beams used to heat the plasma in fusion devices. The processes regulating the ion extraction involve the formation of a sheath on a scale comparable to the Debye length of the plasma. On the other hand, the ion acceleration as a beam is obtained on distances greater than λ{sub D}. The paper presents a model for both the phases of ion extraction and acceleration of the ions and its implementation in a numerical code. The space charge of particles is deposited following usual Particle in Cell codes technique, while the field is solved with finite element methods. Some hypotheses on the beam plasma transition are described, allowing to model both regions at the same time. The code was tested with the geometry of the NIO1 negative ions source, and the results are compared with existing ray tracing codes and discussed.

43 PARTICLE ACCELERATORS↗

Role of Neutrals Versus Transport in Determining the Pedestal Density Structure: Final Technical Report

In fusion devices the plasma density plays a crucial role in determining the fusion reaction rate and has a direct impact on the fusion gain of a given device. This density is in general regulated by the particle sources and transport near the plasma edge, which give rise to an edge density pedestal. When predicting the performance of future devices, this density pedestal is often prescribed, rather than predicted, due to a lack of models which allow confident extrapolation. This project aims to advance these models through the focused validation of theoretical models related to the transport of fueling neutral particles, and through interpretive transport modeling in present day fusion plasmas, in which the penetration of neutrals is altered to better simulate future reactor-like conditions. Achievements in theory and model validation under this project have advanced our understanding of how much of the edge density profile is set by transport versus direct ionization, enabling interesting projections to future burning plasma devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulations of edge and SOL turbulence in diverted negative and positive triangularity plasmas

Optimizing the performance of magnetic confinement fusion devices is critical to achieving an attractive fusion reactor design. Negative triangularity (NT) scenarios have been shown to achieve excellent levels of energy confinement, while avoiding edge localized modes. Modeling turbulent transport in the edge and SOL is key in understanding the impact of NT on turbulence and extrapolating the results to future devices and regimes. Previous gyrokinetic turbulence studies have reported beneficial effects of NT across a broad range of parameters. However, most simulations have focused on the inner plasma region, neglecting the impact of NT on the outermost edge. In this work, we investigate the effect of NT in edge and scrape-off layer simulations, including the magnetic X-point and separatrix. For the first time, we employ a multi-fidelity approach, combining global, non-linear gyrokinetic simulations with drift-reduced fluid simulations, to gain a deeper understanding of the underlying physics at play. First-principles simulations using the GENE-X code demonstrate that in comparable NT and PT geometries, similar profiles are achieved, while the turbulent heat flux is reduced by more than 50% in NT. Comparisons with results from the drift-reduced fluid turbulence code GRILLIX suggest that the turbulence is driven by trapped electron modes. The parallel heat flux width on the divertor targets is reduced in NT, primarily due to a lower spreading factor S.

GENE-X↗

The influence of helium on deuterium retention in beryllium co-deposits

Tritium co-deposition with materials from the plasma-facing components is expected to be the main contributor to tritium retention in ITER. Since He will also be present in the plasma as fusion ash during the DT campaign, this study focuses on the effect of He on D retention in Be co-deposits. The PISCES-B linear plasma device was used to create co-deposited Be-D-He layers for various deposition temperatures (295 K - 475 K) and He concentrations in D - αHe plasma mixtures (0 ≤ α ≤ 0.1). Thermal desorption spectroscopy and nuclear reaction analysis were used to determine the D concentration in co-deposits. For the lowest He concentration (1%) an increase of D retention was observed for the deposition at room temperature, whereas for higher He concentrations a declining trend of D retention was found. Including 10% of He in the plasma is found to reduce D retention at deposition temperatures below 425 K and have a negligible effect at higher deposition temperatures.

36 MATERIALS SCIENCE↗

Impact of impurities on peeling–ballooning modes and turbulence in tokamak plasmas

This study investigates the impact of various impurity species on peeling–ballooning (PB) modes and microturbulence in tokamak plasmas through the extension of traditional two-fluid and gyro-landau-fluid (GLF) models. By incorporating finite Larmor radius (FLR) effects, the analysis provides a comprehensive understanding of impurity-driven impact and its interaction with plasma turbulence. Depending on charge state and local plasma conditions, heavy impurities may exhibit gyro-radii larger than those of main ions, which are captured in the extended GLF model presented. Following the presentation of modified two-fluid equations incorporating impurity effects, we systematically analyze the distinctions between impurity and main ion dynamics and their resultant feedback mechanisms on plasma behavior. Derivation of the linear dispersion relation enables quantification of impurity-mediated modifications to: plasma vorticity, diamagnetic drift and gyroviscous effects, electron Hall physics, and FLR effects. BOUT++ – based linear simulations corroborate this formalism, demonstrating systematic stabilization of PB modes upon impurity seeding. And then operational implications for practical impurity control strategies in tokamak devices are proposed. The results underscore the necessity of impurity management to maintain stability and optimize plasma confinement, with specific focus on how FLR effects contribute to transport dynamics. This work paves the way for enhanced modeling and simulation efforts, supporting the development of strategies to control impurity-induced turbulence and improve overall reactor performance.

BOUT++ simulation↗

The Surface Interface Characteristics of Vertically Aligned Carbon Nanotube and Graphitic Carbon Fiber Arrays Grown by Thermal and Plasma Enhanced Chemical Vapor Deposition

The development of nano-arrays for sensors and devices requires the growth of arrays with the proper characteristics. One such application is the growth of vertically aligned carbon nanotubes (CNTs) and graphitic carbon fibers (GCFs) for the chemical attachment of probe molecules. The effectiveness of such an array is dependent not only upon the effectiveness of the probe and the interface between that probe and the array, but also the array and the underlaying substrate. If that array is a growth of vertically aligned CNTs or GCFs then the attachment of that array to the surface is of the utmost importance. This attachment provides the mechanical stability and durability of the array, as well as, the electrical properties of that array. If the detection is to be acquired through an electrical measurement, then the appropriate resistance between the array and the surface need to be fabricated into the device. I will present data on CNTs and GCFs grown from both thermal and plasma enhanced chemical vapor deposition. The focus will be on the characteristics of the metal film from which the CNTs and GCFs are grown and the changes that occur due to changes within the growth process.

Delzeit, Lance↗

Surface band bending and interface alignment of plasma-enhanced atomic layer deposited SiO2 on AlxGa1-xN

AlxGa1-xN is characterized by a significant spontaneous and piezoelectric polarization, which increases with the aluminum content. As a result, a surface bound charge is present, which favors compensation by surface states and influences the reliability of AlGaN/GaN devices. This work, therefore, focused on the effects of the polarization charge for GaN and AlGaN with three different aluminum concentrations 15%, 25%, and 35%. The band bending of AlxGa1-xN surfaces was measured after a N2/H2 plasma pretreatment, which reduced the carbon and oxygen contamination below the detection limit of x-ray photoelectron spectroscopy. Surface band bending was then related to surface states, where the band bending of oxygen-free surfaces—as obtained with a high-temperature, immersed hydrogen/nitrogen plasma clean—scales with the aluminum content. In addition, the band offsets at the plasma-enhanced atomic layer deposited SiO2/AlxGa1-xN interface were measured, giving 3.4 eV, 3.3 eV, 3.3 eV, and 3.0 eV for respective 0%, 15%, 25%, and 35% aluminum concentrations. These values are in accordance with the charge neutrality level model, which implies that SiO2 will confine carriers over nearly the full range of the aluminum content.

Eller, Brianna S.↗

Invited Review Article: The electrostatic plasma lens

The fundamental principles, experimental results, and potential applications of the electrostatic plasma lens for focusing and manipulating high-current, energetic, heavy ion beams are reviewed. First described almost 50 years ago, this optical beam device provides space charge neutralization of the ion beam within the lens volume, and thus provides an effective and unique tool for focusing high current beams where a high degree of neutralization is essential to prevent beam blow-up. Short and long lenses have been explored, and a lens in which the magnetic field is provided by rare-earth permanent magnets has been demonstrated. Applications include the use of this kind of optical tool for laboratory ion beam manipulation, high dose ion implantation, heavy ion accelerator injection, in heavy ion fusion, and other high technology.

43 PARTICLE ACCELERATORS↗

Effect of radial pressure corrugations and profile shearing on turbulence in Fusion plasmas

Microturbulence can produce stationary fine-scale radial corrugations on the plasma density and temperature gradients in magnetic confinement fusion devices. We show that these structures play a significant role in regulating turbulent transport. We focus on the pedestal, studying electron-temperature-gradient (ETG) mode destabilisation and saturation in the presence of radial corrugations on the electron temperature gradient that could result from microtearing turbulence. A linear dispersion relation is derived for a shearless slab case, which indicates that in the presence of a sinusoidal background corrugation, each ETG mode splits into three distinct eigenvalues, with one being the original, one being more unstable and one being less unstable. However, despite the presence of more unstable linear modes, nonlinear gyrokinetic simulations of ETG with corrugated background electron temperature show a reduction of fluxes. Our investigation reveals a radial variation of the phase velocity of the modes that is proportional to the diamagnetic drift velocity and the local pressure gradient. The associated profile shearing breaks the turbulent eddies apart, reducing the transport level. This profile shearing resulting from fine-scale pressure corrugations could be a ubiquitous turbulence saturation mechanism not just in Fusion plasmas, but in Astrophysics and other areas.

FOS: Physical sciences↗

Spectroscopy of betatron radiation emitted from laser-produced wakefield accelerated electrons

X-ray betatron radiation is produced by oscillations of electrons in the intense focusing field of a laser-plasma accelerator. These hard x-rays show promise for use in femtosecond-scale time-resolved radiography of ultrafast processes. However, the spectral characteristics of betatron radiation have only been inferred from filter pack measurements. In order to achieve higher resolution spectral information about the betatron emission, we used an x-ray charge-coupled device to record the spectrum of betatron radiation, with a full width at half maximum resolution of 225 eV. In addition, we have recorded simultaneous electron and x-ray spectra along with x-ray images that allow for a determination of the betatron emission source size, as well as differences in the x-ray spectra as a function of the energy spectrum of accelerated electrons.

43 PARTICLE ACCELERATORS↗

Microplasma source for optogalvanic spectroscopy of nanogram samples

The demand for analysis of smaller samples in isotopic ratio measurements of rare isotopes is continuously rising with the development of new applications, particularly in biomedicine. Interesting in this aspect are methods based on optogalvanic spectroscopy, which have been reported to facilitate both {sup 13}C-to-{sup 12}C and {sup 14}C-to-{sup 12}C ratio measurements with high sensitivity. These methods also facilitate analysis of very small samples, down to the microgram range, which makes them very competitive to other technologies, e.g., accelerator mass spectroscopy. However, there exists a demand for moving beyond the microgram range, especially from regenerative medicine, where samples consist of, e.g., DNA, and, hence, the total sample amount is extremely small. Making optogalvanic spectroscopy of carbon isotopes applicable to such small samples, requires miniaturization of the key component of the system, namely the plasma source, in which the sample is ionized before analysis. In this paper, a novel design of such a microplasma source based on a stripline split-ring resonator is presented and evaluated in a basic optogalvanic spectrometer. The investigations focus on the capability of the plasma source to measure the optogalvanic signal in general, and the effect of different system and device specific parameters on the amplitude and stability of the optogalvanic signal in particular. Different sources of noise and instabilities are identified, and methods of mitigating these issues are discussed. Finally, the ability of the cell to handle analysis of samples down to the nanogram range is investigated, pinpointing the great prospects of stripline split-ring resonators in optogalvanic spectroscopy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A new method of out-of-focus millimeter wave imaging in fusion plasma diagnostics using Bessel beams

Electron cyclotron emission imaging (ECEI) and microwave imaging reflectometry diagnostics have been employed on a number of magnetic fusion plasma confinement devices. The common approach is based on a Gaussian beam assumption, which generates good spatial resolution (centimeter level). However, the radial focal depth is limited by the poloidal resolution, which is comparable with the Rayleigh length (~150 mm). By contrast, a new Bessel beam approach has been developed and demonstrated to generate much longer focal depth with the property of propagation stability. To test the new approach, the DIII-D tokamak LCP ECEI optics have been re-designed to support a Bessel beam approach based on an axicon lens. The achievable radial coverage can exceed that of the current Gaussian approach by 3×. Finally, the imaging result is discussed in this paper based on the simulation analysis and laboratory testing result.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of plasma instabilities and verification of the BOUT code for the Large Plasma Device

The properties of linear instabilities in the Large Plasma Device [W. Gekelman et al., Rev. Sci. Instrum. 62, 2875 (1991)] are studied both through analytic calculations and solving numerically a system of linearized collisional plasma fluid equations using the three-dimensional fluid code BOUT[M. Umansky et al., Contrib. Plasma Phys. 180, 887 (2009)], which has been successfully modified to treat cylindrical geometry. Instability drive from plasma pressure gradients and flows is considered, focusing on resistive drift waves and the Kelvin-Helmholtz and rotational interchange instabilities. A general linear dispersion relation for partially ionized collisional plasmas including these modes is derived and analyzed. For Large Plasma Device relevant profiles including strongly driven flows, it is found that all three modes can have comparable growth rates and frequencies. Detailed comparison with solutions of the analytic dispersion relation demonstrates that BOUT accurately reproduces all characteristics of linear modes in this system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Pellet-Injector Technology—Brief History and Key Developments in the Last 25 Years

High-speed injection of solid fuel was first proposed in 1954 as a possible solution to the problem of transporting fresh fuel across the confining magnetic fields into the plasma of a fusion reactor. While it took a few decades, the use of cryogenic pellets (typically H 2 and D 2 ) on fusion experiments became common place; most tokamaks and stellarators are now equipped with a pellet injector(s). These devices operate at low temperatures (~10 to 20 K) and most often use a simple light gas gun to accelerate macroscopic-size pellets (~0.4- to 6-mm diameter) to speeds of ~100 to 1000 m/s. Before the advantages of pellet injection from the magnetic high-field side (HFS) of a tokamak were recognized in 1997, development focused on increasing the pellet speed to achieve deeper plasma penetration and higher fueling efficiency. The HFS injection technique typically dictates slower pellets (~100 to 300 m/s) to survive transport through the curved guide tubes that route the pellets to the plasma from the inside wall of the device. Two other key operating parameters for plasma fueling are the pellet-injection repetition rate and time duration—a single pellet is adequate for some experiments and a steady-state injection rate of up to ~50 Hz is appropriate for others. In addition to plasma fueling, cryogenic pellets have often been used for particle transport and impurity studies in fusion experiments (most often with neon pellets). During the past two decades, a few new applications for cryogenic pellets have been developed and used successfully in plasma experiments: (1) one for edge-localized mode mitigation, (2) one for plasma disruption mitigation (requires large pellets that are shattered before injection into the plasma), and (3) another in which pure argon pellets are used to trigger runaway electrons in the plasma for scientific studies. Here in this paper, a brief history and the key developments in this technology during the past 25 years are presented and discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

L-shell spectroscopic diagnostics of radiation from krypton HED plasma sources

X-ray spectroscopy is a useful tool for diagnosing plasma sources due to its non-invasive nature. One such source is the dense plasma focus (DPF). Recent interest has developed to demonstrate its potential application as a soft x-ray source. We present the first spectroscopic studies of krypton high energy density plasmas produced on a 3 kJ DPF device in Singapore. In order to diagnose spectral features, and to obtain a more comprehensive understanding of plasma parameters, a new non-local thermodynamic equilibrium L-shell kinetic model for krypton was developed. It has the capability of incorporating hot electrons, with different electron distribution functions, in order to examine the effects that they have on emission spectra. To further substantiate the validity of this model, it is also benchmarked with data gathered from experiments on the electron beam ion trap (EBIT) at Lawrence Livermore National Laboratory, where data were collected using the high resolution EBIT calorimeter spectrometer.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The Influence of spot size on the expansion dynamics of nanosecond-laser-produced copper plasmas in atmosphere

Laser produced copper plasmas of different spot sizes in air were investigated using fast photography and optical emission spectroscopy (OES). The laser energy was 33 mJ. There were dramatic changes in the plasma plume expansion into the ambient air when spot sizes changed from {approx}0.1 mm to {approx}0.6 mm. A stream-like structure and a hemispherical structure were, respectively, observed. It appeared that the same spot size resulted in similar expansion dynamics no matter whether the target was located in the front of or behind the focal point, although laser-induced air breakdown sometimes occurred in the latter case. Plasma plume front positions agree well with the classic blast wave model for the large spot-size cases, while an unexpected stagnation of {approx}80 ns occurred after the laser pulse ends for the small spot size cases. This stagnation can be understood in terms of the evolution of enhanced plasma shielding effects near the plasma front. Axial distributions of plasma components by OES revealed a good confinement effect. Electron number densities were estimated and interpreted using the recorded Intensified Charge Coupled Device (ICCD) images.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Specific Impulse of Electric Solid Propellant in an Electrothermal Ablation-Fed Pulsed Plasma Thruster

Electric solid propellants are advanced solid chemical rocket propellants that can be controlled (ignited, throttled, and extinguished) through the application and removal of an electric current. Recent work has focused on application of this propellant in an electrothermal ablation-fed pulsed plasma thruster. In this paper, impulse bit measurements in such devices fed by either the electric solid propellant or a traditional state-of-the-art propellant, polytetrafluoroethylene, are expanded upon. It is demonstrated that a surface layer in the hygroscopic electric solid propellant is rapidly ablated over the first few discharges of the device, which correspondingly decreases specific impulse relative to the traditional polytetrafluoroethylene propellant. Correcting these data by subtracting the early discharge ablation mass loss measurements yields a corrected electric solid propellant specific impulse of approximately 300 s. As the test duration increases to a large number of discharges, and the initial mass loss is a reduced fraction of the total, the effect of absorbed water in the propellant is decreased and the specific impulse without any corrections approaches the corrected 300 s value.

Glascock, Matthew S.↗

Thermohydraulic Design Analysis of the Target Assembly in the Material Plasma Exposure Experiment Facility

The Material Plasma Exposure eXperiment (MPEX) project seeks to design a steady-state linear plasma facility at Oak Ridge National Laboratory that will be used to study plasma-material interactions (PMIs) at fusion prototypic levels, supporting the evaluation and development of materials for the next generation of fusion devices. This study is focused on PMI exposure of small-size neutron-irradiated specimens, which are clamped onto an actively cooled component. A thermohydraulic evaluation of a new MPEX target assembly design to assess the appropriate operation during MPEX operation is presented. To further guide the design and assess the structural integrity of the components under expected loads, preliminary thermomechanical stress analyses were also conducted. To ensure good thermal contact between the components, thermal interface materials, such as silver flexible graphite, were used in the assembly. It was found that the maximum target temperatures of 1572, 1463, and 1315 K were obtained for Grafoil thicknesses of 0.61, 0.38, and 0.25 mm, respectively. The distribution of the axial deformation at high heat fluxes showed that there are no gaps between components, indicating good contact at material interfaces. Moreover, the contact pressure between the target and other components indicated that very good contact was established at these interfaces. Furthermore, the stress-strain conditions for the target will be further used to assess the appropriate operation during MPEX experiments and gain insight into materials science phenomena during PMI experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗