Search NASA⌕ Search

SEARCH · Search NASA

Results for “Particle separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

Electrostatic Beneficiation of Lunar Regolith: Applications in In-Situ Resource Utilization

Upon returning to the moon, or further a field such as Mars, presents enormous challenges in sustaining life for extended periods of time far beyond the few days the astronauts experienced on the moon during the Apollo missions. A stay on Mars is envisioned to last several months, and it would be cost prohibitive to take all the requirements for such a stay from earth. Therefore, future exploration missions will be required to be self-sufficient and utilize the resources available at the mission site to sustain human occupation. Such an exercise is currently the focus of intense research at NASA under the In-situ Resource Utilization (ISRU) program. As well as oxygen and water necessary for human life, resources for providing building materials for habitats, radiation protection, and landing/launch pads are required. All these materials can be provided by the regolith present on the surface as it contains sufficient minerals and metals oxides to meet the requirements. However, before processing, it would be cost effective if the regolith could be enriched in the mineral(s) of interest. This can be achieved by electrostatic beneficiation in which tribocharged mineral particles are separated out and the feedstock enriched or depleted as required. The results of electrostatic beneficiation of lunar simulants and actual Apollo regolith, in lunar high vacuum are reported in which various degrees of efficient particle separation and mineral enrichment up to a few hundred percent were achieved.

Trigwell, Steve↗
DOE OSTI2013

The source regions of solar energetic particles detected by widely separated spacecraft

We studied the source regions of 12 solar energetic particle (SEP) events seen between 2010 August and 2012 January at STEREO-A, B, and/or Earth (Advanced Composition Explorer/Solar and Heliospheric Observatory/GOES), when the two STEREO spacecraft were separated by about 180°. All events were associated with flares (C1 to X6) and fast coronal mass ejections and, except for one, accompanied by type II radio bursts. We have determined the arrival times of the SEPs at the three positions. Extreme ultraviolet (EUV) waves, observed in the 195 Å and 193 Å channels of STEREO and the Solar Dynamics Observatory, are tracked across the Sun to determine their arrival time at the photospheric source of open field lines connecting to the spacecraft. There is a good correlation between the EUV wave arrival times at the connecting footpoints and the SEP onset times. The delay time between electron onset and the EUV wave reaching the connecting footpoint is independent of distance from the flare site. The proton delay time increases with distance from the flare site. In three of the events, secondary flare sites may have also contributed to the wide longitudinal spread of SEPs.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Galvanostatic Intermittent Titration Technique Reinvented: Part II. Experiments

Following a critical review of the galvanostatic intermittent titration technique in Part I, here we experimentally demonstrate how to extract chemical diffusivity with a modified method. We prepare dense bulk samples that ensure diffusion-limitation. We utilize the scaling with $\sqrt{{t}_{\mathrm{relax}}+\tau }-\sqrt{{t}_{\mathrm{relax}}}$ (trelax: relaxation time; τ: pulse duration), avoiding problems with composition-dependent overpotentials. The equilibrium Nernst voltage is measured separately using small porous particles. This separation between the diffusion measurement and the titration procedure is critical for performing each measurement in a reliable setting. We report the chemical diffusion coefficients of LixNi1/3Mn1/3Co1/3O2 and their activation energy. We extract ionic conductivity and compare it with total conductivity to confirm ion-limitation in chemical diffusion. The measurements suggest that the time scale for diffusion in typical Li-ion battery particles could be much shorter than that of the intercalation/deintercalation processes at the particle surface (Biot number less than 0.1).

25 ENERGY STORAGE↗
DOE OSTI2014

Electric field enhancement in a self-assembled 2D array of silver nanospheres

We investigate the plasmonic properties of a self-assembled 2D array of Ag nanospheres (average particle diameter/inter-particle separation distance of 9/3.7 nm). The structures of the individual particles and their assemblies are characterized using high-resolution transmission electron microscopy (HR-TEM). The plasmonic response of the nanoparticle network is probed using two-photon photoemission electron microscopy (TP-PEEM). HR-TEM and TP-PEEM statistics reveal the structure and plasmonic response of the network to be homogeneous on average. This translates into a relatively uniform surface-enhanced Raman scattering (SERS) response from biphenyl,4-4{sup ′}-dithiol (BPDT) molecules adsorbed onto different sites of the network. Reproducible, bright, and low-background SERS spectra are recorded and assigned on the basis of density functional theory calculations in which BPDT is chemisorbed onto the vertex of a finite tetrahedral Ag cluster consisting of 20 Ag atoms. A notable agreement between experiment and theory allows us to rigorously account for the observable vibrational states of BPDT in the ∼200–2200 cm{sup −1} region of the spectrum. Finite difference time domain simulations further reveal that physical enhancement factors on the order of 10{sup 6} are attainable at the nanogaps formed between the silver nanospheres in the 2D array. Combined with modest chemical enhancement factors, this study paves the way for reproducible single molecule signals from an easily self-assembled SERS substrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1994

A filament of energetic particles near the high-latitude dawn magnetopause

The Geotail satelite detected a filament of tailward-streaming energetic particles spatially separated from the boundary layer of energetic particles at the high-latitude dawn magnetopause at a downstream distance of approximately 80 R(sub E) on October 27, 1992. During this event, the composition and charge states of energetic ions at energies above approximately 10 keV show significant intermix of ions from solar wind and ionospheric sources. Detailed analysis leads to the deduction that the filament was moving southward towards the neutral sheet at an average speed of approximately 80 km/s, implying an average duskward electric field of approximately 1 mV/m. Its north-south dimension was approximately 1 R(sub E) and it was associated with an earthward directed field-aligned current of approximately 5 mA/m. The filament was separated from the energetic particle boundary layer straddling the magnetopause by approximately 0.8 R(sub E) and was inferred to be detached from the boundary layer at downstream distance beyond approximately 70 R(sub E) in the distant tail.

Lui, A. T. Y.↗
NASA NTRS1977

Olivine separates from Murchison and Cold Bokkeveld - Particle tracks and noble gases

Olivine separates from Murchison and Cold Bokkeveld were analyzed for particle tracks and noble gases. The matrix remaining after olivine separation was also analyzed for noble gases. The olivines from both meteorites have comparable fractions of solar-flare-irradiated grains, but the highest track densities in Murchison are an order of magnitude greater than those in Cold Bokkeveld. Solar Ne content in Murchison olivines follows this trend, being at least an order of magnitude higher than that in Cold Bokkeveld. Track gradients in Cold Bokkeveld olivines are flatter than those in Murchison or recently exposed lunar crystals. Relative to the matrix, olivine separates in both meteorites have small enrichments at the heavy and light Xe isotopes and smaller Ar-36/Ar-38 ratios. These noble-gas effects may be related to a chromite impurity in the olivine separates.

Macdougall, J. D.↗
DOE OSTI2024

Sulfuric Acid New Particle Formation Field Campaign Report

This campaign aimed to measure gaseous sulfuric acid concentrations at the surface level using a newly developed sulfuric acid dimethylamine-reactive condensation particle counter (SAD-RCPC). Sulfuric acid is a key nucleation precursor and is the likely driving compound for new particle formation at the Atmospheric Radiation Measurement (ARM) user facility’s Southern Great Plains (SGP) observatory. The SAD-RCPC will be deployed in the future at ARM SGP (AFC010010: "Vertically Resolved Nucleation Precursors at SGP") scheduled for 2024. The campaign was in conjunction with Eleanor Browne's campaign (AFC010075: Boundary-layer gradients in new particle formation) and took place from 05/7/23 to 5/21/23. The measured sulfuric acid concentrations by the SAD-RCPC will be compared to concentrations measured by Browne's chemical ionization mass spectrometer (CIMS). The SAD-RCPC consisted of a glass flow reactor coupled to a 1-nm diethylene glycol condensation particle counter (DEG CPC). Sampled air was mixed with a high concentration of dimethylamine vapor (~1 ppbv). Sulfuric acid within the sampled gas nucleated with dimethylamine to form detectable 1-nm particles. The measured particle concentration was converted to sulfuric acid concentration using nucleation reaction kinetics. The pulse height distribution of particles detected by the DEG CPC was observed using a multi-channel analyzer. Large pre-existing particles were separated from the freshly formed particles in the SAD-RCPC from the pulse height distribution (PHD). During the short campaign, seven new particle formation events were observed. The SAD-RCPC detected an increase in sulfuric acid concentration, but this also coincided with an increase in pre-existing <3 nm particle concentrations. In addition, Browne's CIMS detect sulfuric acid concentrations in the range of 10 5 -10 6 cm -3 .

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2015

Synthesis of ordered L10-type FeNi nanoparticles

Particles of iron and nickel are added to a flowing plasma stream which does not chemically alter the iron or nickel. The iron and nickel are heated and vaporized in the stream, and then a cryogenic fluid is added to the stream to rapidly cause the formation of nanometer size particles of iron and nickel. The particles are separated from the stream. The particles are preferably formed as single crystals in which the iron and nickel atoms are organized in a tetragonal L1.sub.0 crystal structure which displays magnetic anisotropy. A minor portion of an additive, such as titanium, vanadium, aluminum, boron, carbon, phosphorous, or sulfur, may be added to the plasma stream with the iron and nickel to enhance formation of the desired crystal structure.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Kinetics of Nanoparticle Interactions in Battery Electrodes

Nanoparticles with a tendency to phase separate interact with each other during a process of either intraparticle phase separation (occurring inside the particle) or interparticle phase separation (occurring between particles). In this paper, we examine a halfcell consisting of two particles to systematically analyze the particle interactions and their resulting voltage response at different insertion currents. The kinetics of the interactions between nanoparticles is studied for cases in which particles undergo interparticle and intraparticle phase separation. Our results indicate that the interactions between particles in a cell containing only particles that undergo intraparticle phase separation are similar to those in a cell containing only particles that undergo interparticle phase separation. In both cases, sequential transformation occurs at low currents, whereas a simultaneous transformation occurs at high currents. Furthermore, such transformation dynamics changes in cases where the cell contains a mixture of particles that undergo interparticle and intraparticle phase separations, which exhibits more complex dynamics.

25 ENERGY STORAGE↗
DOE OSTI2017

A fast integrated mobility spectrometer for rapid measurement of sub-micrometer aerosol size distribution, Part I: Design and model evaluation

This study discusses, a fast integrated mobility spectrometer (FIMS) was previously developed to characterize submicron aerosol size distributions at a frequency of 1 Hz and with high size resolution and counting statistics. However, the dynamic size range of the FIMS was limited to one decade in particle electrical mobility. It was proposed that the FIMS dynamic size range can be greatly increased by using a spatially varying electric field. This electric field creates regions with drastically different field strengths in the separator, such that particles of a wide diameter range can be simultaneously classified and subsequently measured. A FIMS incorporating this spatially varying electric field is developed. This paper describes the theoretical frame work and numerical simulations of the FIMS with extended dynamic size range, including the spatially varying electric field, particle trajectories, activation of separated particles in the condenser, and the transfer function, transmission efficiency, and mobility resolution. The influences of the particle Brownian motion on FIMS transfer function and mobility resolution are examined. The simulation results indicate that the FIMS incorporating the spatially varying electric field is capable of measuring aerosol size distribution from 8 to 600 nm with high time resolution. As a result, the experimental characterization of the FIMS is presented in an accompanying paper.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1993

Electrophoretic separation of cells and particles from rat pituitary and rat spleen

There are 3 parts to the IML-2 TX-101 experiment. Part 1 is a pituitary cell culture experiment. Part 2 is a pituitary cell separation experiment using the Japanese free flow electrophoresis unit (FFEU). Part 3 is a pituitary secretory granule separation experiment using the FFEU. The objectives of this three part experiment are: (1) to determine the kinetics of production of biologically active growth hormone (GH) and prolactin (PRL) in rat pituitary GH and PRL cells in microgravity (micro-g); (2) to investigate three mechanisms by which a micro-g-induced lesion in hormone production may occur; and (3) to determine the quality of separations of pituitary cells and organelles by continuous flow electrophoresis (CFE) in micro-g under conditions where buoyancy-induced convection is eliminated.

Hymer, Wesley C.↗
DOE OSTI2019

Chemical Imaging of Atmospheric Organic Particles in the Southern Great Plains Field Campaign Report

The main goal of this field project was to characterize the chemical and physical properties of atmospheric particles representative of the Southern Great Plains (SGP) environment to establish a relationship between the composition of aerosol particles and their atmospheric impacts. The specific research efforts were focused on in-depth microscopy studies of chemical and physical properties of atmospheric organic particles collected at the U.S. Department of Energy’s Atmospheric Radiation Measurement (ARM) SGP observatory. An array of novel molecular-level characterization and chemical imaging approaches were used to characterize chemical composition of particles and elucidate fundamental processes governing their atmospheric aging, evolution of chemical composition, optical properties, cloud formation ability, and implications for particle-cloud interactions – the most challenging problems relevant to predictive understanding of aerosol effects on climate.(1, 2) Atmospheric particles consist of a complex mixture of organic compounds with a wide range of molecular structures, morphologies, physical properties, and chemical reactivity. The chemical composition, morphology, and phase state of atmospheric particles are of crucial importance for understanding the formation and reaction mechanisms of particles, their atmospheric evolution, and their impact on climate. It is of great interest to understand how the chemical and morphological particle microstructure affects their physicochemical properties such as chemical reactivity, thermodynamics of gas-particle partitioning, phase separations inside individual particles, hygroscopicity, optical properties, and ability to form liquid droplets (cloud condensation nuclei) and ice crystals (ice nuclei) in clouds. The phase state of organic particles, which yet remains poorly understood, plays a key role in their physicochemical properties and has important implications in various atmospheric processes. Fundamental understanding of these physicochemical properties and their possible evolution in time requires advanced analytical approaches for chemical imaging of particles with a resolution on the scale of 10-100 nm.(3) Comprehensive characterization of the size-dependent chemical composition of individual particles collected at the site was carried out using advanced molecular-level characterization and imaging approaches to identify their possible sources and to correlate to their climatic properties.

Southern Great Plains, aerosols, HI-SCALE field ca↗
NASA NTRS1982

Electrophoresis device

A device for separating cellular particles of a sample substance into fractionated streams of different cellular species includes a casing having a distribution chamber, a separation chamber, and a collection chamber. The electrode chambers are separated from the separation chamber interior by means of passages such that flow variations and membrane variations around the slotted portion of the electrode chamber do not enduce flow perturbations into the laminar buffer curtain flowing in the separation chamber. The cellular particles of the sample are separated under the influence of the electrical field and the separation chamber into streams of different cellular species. The streams of separated cells enter a partition array in the collection chamber where they are fractionated and collected.

Rhodes, P. H.↗
NASA NTRSDate not supplied

Characterization of Naturally-Occurring Particles in the Nasa Langley 0.3-m Transonic Cryogenic Tunnel Using PTV

Naturally-occurring particles within the NASA Langley 0.3-m Transonic Cryogenic Tunnel are characterized for their aerodynamic performance using particle tracking velocimetry. Two sets of experiments were conducted to observe different behaviors of the particles. The normal shockwave emanating from the top surface of a supercritical airfoil was used to induce velocity lag in the particles, and the subsequent spatial decay of the velocity was used to estimate the effective diameter of the particles. Mean particle diameters between 1.6 and 1.9 𝝁m were measured, with sizes ranging from 0.2 to 3.5 𝝁m over the entire ensemble. The response of particles to separated flow was investigated. By operating in “high-lift” (low Mach number, high angle of attack) conditions with a semi-span airfoil, the ability of particles to detect separated flow on the upper surface of the airfoil was assessed. Transition from fully attached flow to fully separated flow was observed on the top surface of the airfoil accompanying a variation of angle of attack from 8° to 12°. Examination of velocity distributions indicates less than 10 percent of particle trajectories did not respond to the regions of separated flow. These results are promising, but further facility-specific work is needed to answer the broader question of particle tracking reliability.

Transonic↗
NASA NTRSDate not supplied

Characterization of Naturally-Occurring Particles in the NASA Langley 0.3-m Transonic Cryogenic Tunnel Using PTV

Naturally-occurring particles within the NASA Langley 0.3-m Transonic Cryogenic Tunnel are characterized for their aerodynamic performance using particle tracking velocimetry. Two sets of experiments were conducted to observe different behaviors of the particles. The normal shockwave emanating from the top surface of a supercritical airfoil was used to induce velocity lag in the particles, and the subsequent spatial decay of the velocity was used to estimate the effective diameter of the particles. Mean particle diameters between 1.6 and 1.9 𝝁m were measured, with sizes ranging from 0.2 to 3.5 𝝁m over the entire ensemble. The response of particles to separated flow was investigated. By operating in “high-lift” (low Mach number, high angle of attack) conditions with a semi-span airfoil, the ability of particles to detect separated flow on the upper surface of the airfoil was assessed. Transition from fully attached flow to fully separated flow was observed on the top surface of the airfoil accompanying a variation of angle of attack from 8° to 12°. Examination of velocity distributions indicates less than 10 percent of particle trajectories did not respond to the regions of separated flow. These results are promising, but further facility-specific work is needed to answer the broader question of particle tracking reliability.

Transonic↗
DOE OSTI2016

Development and characterization of an ice-selecting pumped counterflow virtual impactor (IS-PCVI) to study ice crystal residuals

Separation of particles that play a role in cloud activation and ice nucleation from interstitial aerosols has become necessary to further understand aerosol-cloud interactions. The pumped counterflow virtual impactor (PCVI), which uses a vacuum pump to accelerate the particles and increase their momentum, provides an accessible option for dynamic and inertial separation of cloud elements. However, the use of a traditional PCVI to extract large cloud hydrometeors is difficult mainly due to its small cut-size diameters (< 5 µm). Here, for the first time we describe a development of an ice-selecting PCVI (IS-PCVI) to separate ice in controlled mixed-phase cloud system based on the particle inertia with the cut-off diameter ≥ 10 µm. We also present its laboratory application demonstrating the use of the impactor under a wide range of temperature and humidity conditions. The computational fluid dynamics simulations were initially carried out to guide the design of the IS-PCVI. After fabrication, a series of validation laboratory experiments were performed coupled with the Aerosol Interaction and Dynamics in the Atmosphere (AIDA) expansion cloud simulation chamber. In the AIDA chamber, test aerosol particles were exposed to the ice supersaturation conditions (i.e., RH ice > 100 %), where a mixture of droplets and ice crystals was formed during the expansion experiment. In parallel, the flow conditions of the IS-PCVI were actively controlled, such that it separated ice crystals from a mixture of ice crystals and cloud droplets, which were of diameter ≥ 10 µm. These large ice crystals were passed through the heated evaporation section to remove the water content. Afterwards, the residuals were characterized with a suite of online and offline instruments downstream of the IS-PCVI. These results were used to assess the optimized operating parameters of the device in terms of (1) the critical cut-size diameter, (2) the transmission efficiency and (3) the counterflow-to-input flow ratio. Particle losses were characterized by comparing the residual number concentration to the rejected interstitial particle number concentration. Overall results suggest that the IS-PCVI enables inertial separation of particles with a volume-equivalent particle size in the range of ~&thinsp;10–30 µm in diameter with small inadvertent intrusion (~ &thinsp;5 %) of unwanted particles.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

Effect of the medium’s density on the hydrocyclonic separation of waste plastics with different densities

Highlights: • The density of medium is the key parameter to separate plastic particles. • The paper shows the theoretical analysis is in good agreement with test. • The optimum value of the medium’s density was obtained. • The optimum value of the medium’s density lies near that of denser particles. - Abstract: Hydrocyclones can be applied to recycle waste plastics with different densities through separating plastics based on their differences in densities. In the process, the medium density is one of key parameters and the value of the medium’s density is not just the average of the density of two kinds of plastics separated. Based on the force analysis and establishing the equation of motion of particles in the hydrocyclone, a formula to calculate the optimum separation medium density has been deduced. This value of the medium’s density is a function of various parameters including the diameter, density, radial position and tangential velocity of particles, and viscosity of the medium. Tests on the separation performance of the hydrocyclone has been conducted with PET and PVC particles. The theoretical result appeared to be in good agreement with experimental results.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗