Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pathfinder's”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Stress analysis of Pathfinder-2 models

Stress analysis of the Pathfinder 2 fighter model was performed to determine a method for leading- and trailing-edge attachment that gives acceptable stress levels. Structural modeling of the wing was done using the finite element code SPAR. For the models studied, one ordinary lap joint was found to be satisfactory for the leading-edge flap, however, the alternating surface segmented lap joint method fo attachment was necessary for the trailing-edge flap to obtain acceptable stress levels.

Mehrotra, S. C.↗

Pathfinder operations

In 1981, the Inter-Agency Consultative Group (composed of European, Soviet, Japanese and American space agency representatives) conceived the idea of using the two Soviet Vega spacecraft as pathfinders for Giotto since they would arrive at Halley's Comet approximately one week before Giotto. The Vega trajectory data and the Halley camera angle data were combined to improve the comet orbit accuracy. This was used to improve the Giotto fly-by targeting. The DSN performed delta DOR (VLBI) and one-way Doppler measurements of the Vega spacecraft for orbit determination. Although the early part-up phase had many problems, the results during the critical November 30, 1985 to March 4, 1986 operational phase had an overall 95 percent success rate, with 59 successes out of 62 two-station passes.

Wilcher, J.↗

Selection of radio sources for Venus balloon-Pathfinder Delta-DOR navigation at 1.7 GHz

In order to increase the success rate of the Delta-DOR (Delta-Differential One-way Range) VLBI navigational support for the French-Soviet Venus Balloon and Halley Pathfinder projects, forty-four extragalactic radio sources were observed in advance of these projects to determine which were suitable for use as reference sources. Of these forty-four radio sources taken from the existing JPL radio source catalogue, thirty-six were determined to be of sufficient strength for use in Delta-DOR VLBI navigation.

Liewer, K. M↗

Pathfinder: Overview

Viewgraphs are given that provide information on Pathfinder philosophy, status, technology needs, and program elements.

Hudson, Wayne R.↗

Pathfinder: Surface exploration, in-space operations and space transfer

Viewgraphs on the Pathfinder program are presented. Information is given on technology needs, a planetary rover, program management, an autonomous lander, mission applications, orbital assembly, cryogenics, space nuclear reactors, space manufacturing, optical communications, spacecraft propulsion, aerobraking, and orbital transfer vehicles.

Mankins, John↗

Pathfinder: Humans in space

Viewgraphs are presented on the Pathfinder program. Information is given on human exploration of the solar system, technical requirements interfaces, program objectives, space suits, human performance, man-machine systems, space habitats, life support systems, and artificial gravity

Anderson, John L.↗

Regenerative fuel cell systems for project pathfinder

The objectives of a surface power program, an element of the exploration thrust of the Pathfinder project, and plans for meeting them are outlined. Technological assessment and tradeoff studies of fuel cell and electrolyzer technologies suitable for use in a regenerative fuel cell are described. The viability of proton exchange membranes (PEM) in meeting the system requirements is discussed.

Huff, J. R.↗

Mechanical joints and large components for pathfinder in-space assembly and construction

This paper summarizes the background of the Pathfinder Project, In-Space Assembly, and Construction activity for fiscal year 1989. Work is presented on high strength mechanical truss joints and the definition of typical large components that might be required for assembly on-orbit and use on interplanetary space missions. Several mechanical joints were designed, and the most promising early design is presented in detail. The primary design drivers were the ability for robot assembly, the correction of up to a + or - 0.020 inch axial misalignment, and an axial load in the vicinity of + or - 100,000 lb. The most promising joint uses axisymmetric grooves to correct the misalignment and to transfer the load in a smooth path.

Finckenor, Jeff↗

Pathfinder autonomous rendezvous and docking project

Capabilities are being developed and demonstrated to support manned and unmanned vehicle operations in lunar and planetary orbits. In this initial phase, primary emphasis is placed on definition of the system requirements for candidate Pathfinder mission applications and correlation of these system-level requirements with specific requirements. The FY-89 activities detailed are best characterized as foundation building. The majority of the efforts were dedicated to assessing the current state of the art, identifying desired elaborations and expansions to this level of development and charting a course that will realize the desired objectives in the future. Efforts are detailed across all work packages in developing those requirements and tools needed to test, refine, and validate basic autonomous rendezvous and docking elements.

Lamkin, Stephen↗

Drill/borescope System for the Mars Polar Pathfinder

The primary goals of the Mars Polar Pathfinder (MPP) Discovery Mission are to characterize the composition and structure of Mars' north polar ice cap, and to determine whether a climate record may be preserved in layers of ice and dust. The MPP would land as close as possible to the geographic north pole of Mars and use a set of instruments similar to those used by glaciologists to study polar ice caps on Earth: a radar sounder, a drill/borescope system, and a thermal probe. The drill/borescope system will drill approximately 50 cm into the surface and image the sides of the hole at 10 micron resolution for compositional and stratigraphic analysis. Several uncertainties have guided the development of this instrument, and they are discussed.

Paige, D. A.↗

Using virtual reality for science mission planning: A Mars Pathfinder case

NASA's Mars Pathfinder Project requires a Ground Data System (GDS) that supports both engineering and scientific payloads with reduced mission operations staffing, and short planning schedules. Also, successful surface operation of the lander camera requires efficient mission planning and accurate pointing of the camera. To meet these challenges, a new software strategy that integrates virtual reality technology with existing navigational ancillary information and image processing capabilities. The result is an interactive workstation based applications software that provides a high resolution, 3-dimensial, stereo display of Mars as if it were viewed through the lander camera. The design, implementation strategy and parametric specification phases for the development of this software were completed, and the prototype tested. When completed, the software will allow scientists and mission planners to access simulated and actual scenes of Mars' surface. The perspective from the lander camera will enable scientists to plan activities more accurately and completely. The application will also support the sequence and command generation process and will allow testing and verification of camera pointing commands via simulation.

Kim, Jacqueline H.↗

Mars Pathfinder and the exploration of southern Amazonis Planitia

The southern region of Amazonis Planitia provides a variety of target terrains for a roving vehicle such as the Mars Pathfinder Mission. A landing site is proposed at 4 deg N latitude 162 deg W longitude. This area has a reference altitude of between 0 and -1 km and consists of relatively smooth Amazonian-aged deposits within the entire 100 x 200 km landing ellipse. The proposed landing site is within the Upper Member Medusae Fossae Formation deposits (Amu) and near the boundary with Middle Member Medusae Fossae Formation deposits (Amm) and Member 1 Arcadia Formation plains (Aa(sub 1)). Slightly further afield are 107-km-diameter Nicholson crater, its ejecta deposits, and knobby terrain of proposed Hesperian age (HNu). Depending on the exact landing site of the spacecraft and the traverse distance of the rover, these materials also may be sampled.

Barlow, Nadine G.↗

A Mars Pathfinder landing on a recently drained ephemeral sea: Cerberus Plains, 6 deg N, 188 deg W

Along a 500 km-wide belt extending between 202 deg and 180 deg W and lying astride the martian equator, moderately low-albedo, uncratered smooth plains exhibit low thermal inertia and potentially favorable conditions for the preservation of near-surface ice. The Cerberus Plains occupy a topographic trough as much as 2 km below the planetary datum, and the denser atmosphere at these altitudes would also favor long residence times for near-surface ice once emplaced. The plains have previously been interpreted as the result of young (late Amazonian) low viscosity lava flows or similarly youthful fluvial deposition. However, the plains are also included in maps of possibly extensive martian paleoseas or paleolakes. Ice emplaced as such seas dissipated could still be preserved under thin (a few tens of centimeters) sedimentary cover. In any case, and if a sea once existed, aqueous-born interstitial cementation, probably including hydrated iron oxides and sulfate minerals, would have been favored and is now susceptible to investigation by the Pathfinder alpha proton x-ray spectrometer and multispectral imager.

Brakenridge, G. Robert↗

Rationale for a Mars Pathfinder mission to Chryse Planitia and the Viking 1 lander

Presently the landing site for Mars Pathfinder will be constrained to latitudes between 0 deg and 30 deg N to facilitate communication with earth and to allow the lander and rover solar arrays to generate the maximum possible power. The reference elevation of the site must also be below 0 km so that the descent parachute, a Viking derivative, has sufficient time to open and slow the lander to the correct terminal velocity. Although Mars has as much land surface area as the continental crust of the earth, such engineering constraints immediately limit the number of possible landing sites to only three broad areas: Amazonis, Chryse, and Isidis Planitia. Of these, both Chryse and Isidis Planitia stand out as the sites offering the most information to address several broad scientific topics.

Craddock, Robert A.↗

Rationale for Isidis Planitia as a back-up landing site for the Mars Pathfinder mission

The present engineering constraints imposed on the Mars Pathfinder mission leave only three broad regions available for site selection: Amazonis, Chryse, and Isidis Planitia. Because of the knowledge gained by the Viking 1 mission, Chryse Planitia would make an ideal primary landing site. Geological characteristics of Isidis Planitia are discussed with a view to making it a back-up landing site.

Craddock, Robert A.↗

Chryse Planitia as a Mars Pathfinder landing site: The imperative of building on previous ground truth

Based on consideration of the geological characteristics of Chryse Planitia, the requirements for Mars Pathfinder landing sites, the nature of the mission, the scale of the observations to be made, and the need to build outward from previous experience, a new mission to Chryse Planitia offers several advantages that are difficult to ignore as well as offering a low-gamble/high-return mission scenario. Considering the need to ensure a successful mission, and to ensure the continued health of planetary exploration, the reasons for a new mission to Chryse Planitia are compelling. Results of 1:500,000 mapping, operational benefits of Chryse Planitia, science benefits of Chryse Planitia, and conclusions and site recommendations are discussed.

Crumpler, Larry S.↗

Opportunity to sample something different: The dark, unweathered, mafic sands of Cerberus and the Pathfinder 1997 Mars landing

A very important surface component, typically described as 'dark gray material', was not seen at the Viking lander sites, but is common to all low-albedo regions on Mars. Dark material probably includes unaltered mafic volcanic and/or crustal rock and soil not coated by dust, weathering rinds, or varnish. A Pathfinder landing in Cerberus (9 deg N - 16 deg N, 194 deg W - 215 deg W) will guarantee examination of materials that are distinctly different from the two Viking lander sites. In situ study of dark material will provide vital ground truth for orbiter-based observations like those anticipated from Mars '94/'96 and Mars Global Surveyor.

Edgett, Kenneth S.↗

Mars Pathfinder meteorological observations on the basis of results of an atmospheric global circulation model

The Mars Pathfinder Meteorological Package (ASI/MET) will measure the local pressure, temperature, and winds at its future landing site, somewhere between the latitudes 0 deg N and 30 deg N. Comparable measurements have already been obtained at the surface of Mars by the Viking Landers at 22 deg N (VL1) and 48 deg N (VL2), providing much useful information on the martian atmosphere. In particular the pressure measurements contain very instructive information on the global atmospheric circulation. At the Laboratoire de Meteorologie Dynamique (LMD), we have analyzed and simulated these measurements with a martian atmospheric global circulation model (GCM), which was the first to simulate the martian atmospheric circulation over more than 1 year. The model is able to reproduce rather accurately many observed features of the martian atmosphere, including the long- and short-period oscillations of the surface pressure observed by the Viking landers. From a meteorological point of view, we think that a landing site located near or at the equator would be an interesting choice.

Forget, Francois↗