Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pattern formation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Geological analysis and evaluation of ERTS-A imagery for the state of New Mexico

The author has identified the following significant results. Coverage of approximately one-third of the test site had been received by January 31, 1973 and all of the images received were MSS products. Images recorded during the first two months of the ERTS-1 mission were of poor quality, owing largely to high ground reflectance. Later images were of better quality and MSS bands 5 and 7 have proven to be particularly useful. Features noted during visual inspection of 9 1/2 x 9 1/2 prints include major structural forms, vegetation patterns, drainage patterns, and outcrops of geologic formations having marked color contrasts. The Border Hills Structural Zone and the Y-O Structural Zone are prominently reflected in coverage of the Pecos Valley. A study of available maps and remote sensing material covering the Deming-Columbus area indicated that the limit of detection and the resolution of MSS products are not as good as those of aerial photographs, geologic maps, and manned satellite photographs. The limit of detection of high contrast features on MSS prints is approximately 1000 feet or 300 meters for linear features and about 18 acres for roughly circular areas.

Kottlowski, F. E.↗
NASA NTRS1973

Initial evaluation of the geologic applications of ERTS-1 imagery for New Mexico

Coverage of approximately one-third of the test site, the state of New Mexico, had been received by January 31, 1973 and all of the images received were MSS products. Features noted during visual inspection of 91/2 x 91/2 prints include major structural forms, vegetation patterns, drainage patterns and outcrops of geologic formations having marked color contrasts. The Border Hills Structural Zone and the Y-O Structural Zone are prominently reflected in coverage of the Pecos Valley. A study of available maps and remote sensing material covering the Deming-Columbus area indicated that the limit of detection and the resolution of MSS products are not as good as those of aerial photographs, geologic maps, and manned-satellite photographs. The limit of detection of high contrast features on MSS prints in approximately 1000 feet or 300 meters for linear features and about 18 acres for roughly circular areas.

Vonderlinden, K.↗
NASA NTRS1974

Geological photointerpretation of the Paraguana Peninsula using ERTS-A multispectral photography

A methodology was developed to evaluate multispectral analysis of orbital imagery on the interpretation of geology, coastal geomorphology and sedimentary processes. The images analyzed were obtained during the pass of ERTS satellite over the center region of Venezuela on October 19, 1972. ERTS-1 multispectral images in black and white paper copies and transparencies of the 4 bands and false color composites at scales of 1:1,000,000 and 1:500,000 were interpreted. Lithology and outcrop patterns of the following geological formations have been interpreted: igneous and metamorphic basement of Cocodite and Santa Ana, Jurassic-Cretaceous metamorphics of Pueblo Nuevo, Cantaure Miocene-Pliocene sediments, and Quaternary alluvium, dunes, beach ridges, bars and reefs. A prominent and extensive Paraguana tonal anomaly shaped as an 8 has been discovered at the NW of the Peninsula. Its erosional origin has exposed light toned lower beds at the center, with additional evidence of topographic depression and development of underground drainage of karst origin. Coastal geomorphology, its processes and energy has been interpreted with the help of wind direction analysis (ENE-WSW) at sea level through the orientation of transported materials (water vapor, water and sediments) by clouds, waves, sea current, plumes of suspended sediments associated to river outlets, dunes, sediment sources and shore-line orientation.

Albrizzio, C.↗
NASA NTRS1985

Onset phenomena in MPD thrusters

An experimental study has clarified some aspects of MPD thruster onset phenomena. The steep increase in terminal voltage that occurs as the onset current is approached may have different causes, depending on the propellant injection geometry. For propellant injection at the cathode radius, terminal voltage increase corresponds to a growing anode fall voltage; for injection at a larger radius, the increase is related to the back emf in the near-cathode plasma. The formation of the onset current pattern within the arc has been mapped experimentally as the thruster responds to an input current step which rises from below onset to the onset value. The appearance of terminal voltage hash at onset correlates with the extension into the exhaust region of a significant fraction of the arc current.

Barnett, J. W.↗
NASA NTRS1990

Embedding CLIPS in a database-oriented diagnostic system

This paper describes the integration of C Language Production Systems (CLIPS) into a powerful portable maintenance aid (PMA) system used for flightline diagnostics. The current diagnostic target of the system is the Garrett GTCP85-180L, a gas turbine engine used as an Auxiliary Power Unit (APU) on some C-130 military transport aircraft. This project is a database oriented approach to a generic diagnostic system. CLIPS is used for 'many-to-many' pattern matching within the diagnostics process. Patterns are stored in database format, and CLIPS code is generated by a 'compilation' process on the database. Multiple CLIPS rule sets and working memories (in sequence) are supported and communication between the rule sets is achieved via the export and import commands. Work is continuing on using CLIPS in other portions of the diagnostic system and in re-implementing the diagnostic system in the Ada language.

Conway, Tim↗
NASA NTRS2001

Roughness-Dominated Transition on Nosetips, Attachment Lines and Lifting-Entry Vehicles

Modeling of roughness-dominated transition is a critical design issue for both ablating and non-ablating thermal protection systems (TPS). Ablating TPS, used for planetary-entry and earth-return missions, first experience recession under high-altitude, low-Reynolds-number conditions. Such laminar-flow ablation causes the formation of a surface microroughness pattern characteristic of the TPS material composition and fabrication process. For non-ablating TPS, such as the overlapping-tile, metallic heatshields proposed for future reusable launch vehicles, the surface roughness pattern is established a priori by the engineering design and assembly procedure. In both cases, these distributed surface roughness patterns create disturbances within, and alter the mean velocity profile of, the laminar boundary layer flowing over the surface. As altitude decreases, Reynolds number increases, and flow field conditions capable of amplifying these roughness-induced perturbations are eventually achieved, i.e., transition onset occurs. Boundary layer transition to turbulence results in more severe heat-transfer rates. Ablating TPS experience increased recession rates, leading to potential bum-through, while non-ablating TPS experience accelerated temperature rise, leading to potential melting of key components.

Reda, Daniel C.↗
NASA NTRS2001

The FU Orionis Phenomenon and Solar Nebula Material

We summarize astronomical, meteoritic, and theoretical evidence relating to the FU Orionis phenomenon. This evidence suggests that at early times (the first few 10(exp 5) yr), the solar nebula experienced a hot phase characterized by high accretion rates (the "FU Ori epoch"), punctuated by episodic outbursts of enhanced mass flow through the inner part of the disk (less than or equal to 0.3 AU). Throughout this epoch, disk midplane temperatures exceeded 1000 K at 1 AU. Diminishing infall from the cloud core led to decreasing mass flux throughout the disk. When mass flow de creased below the value critical for outburst (5 x 10(exp -7) solar mass/yr, as suggested by thermal ionization instability models), outbursts ceased and the T Tauri epoch began. Outburst timescales are too long to explain calcium- and aluminum-rich inclusion (CAI) and chondrule formation. Volatility-dependent fractionation patterns seen in meteoritic materials suggest that solids formed beginning during a hot epoch when temperatures exceeded 1400 K, and the presence of volatiles in chondrites argues that this process continued until the nebula had cooled to below 400 K. The thermal ionization instability model for FU Ori outbursts is in quantitative agreement with astronomical observations. Its results imply that the terrestrial region of the nebula reached the hot end of this range only during a time when mass flow through the disk was high enough to trigger outbursts (i.e., the FU Ori epoch) and reached the cool end of this range only during the later T Tauri epoch. According to the models, heating of material in the terrestrial planet region during individual FU Ori outbursts would be limited to surface layers of the nebula, leaving midplane materials (which are at greater than or equal to 1000 K) largely unaffected. Alternative FU Ori models should be developed, particularly if compositional differences among chondrite clans are attributable to episodic heating.

Bell, K. R.↗
NASA NTRS2001

Effects of Convective Transport of Solute and Impurities on Defect-Causing Kinetics Instabilities

For in-situ studies of the formation and evolution of step patterns during the growth of protein crystals, we have designed and assembled an experimental setup based on Michelson interferometry with the surface of the growing protein crystal as one of the reflective surfaces. The crystallization part of the device allows optical monitoring of a face of a crystal growing at temperature stable within 0.05 C in a developed solution flow of controlled direction and speed. The reference arm of the interferometer contains a liquid-crystal element that allows controlled shifts of the phase of the interferograms. We employ an image processing algorithm which combines five images with a pi/2 phase difference between each pair of images. The images are transferred to a computer by a camera capable of capturing 6-8 frames per second. The device allows data collection data regarding growth over a relatively large area (approximately .3 sq. mm) in-situ and in real time during growth. The estimated dept resolution of the phase shifting interferometry is about 100 A. The lateral resolution, depending on the zoom ratio, varies between 0.3 and 0.6 micrometers. We have now collected quantitative results on the onset, initial stages and development of instabilities in moving step trains on vicinal crystal surfaces at varying supersaturation, position on the facet, crystal size and temperature with the proteins ferritin, apoferritin and thaumatin. Comparisons with theory, especially with the AFM results on the molecular level processes, see below, allow tests of the rational for the effects of convective flows and, as a particular case, the lack thereof, on step bunching.

Vekilov, Peter G.↗
NASA NTRS2003

Step Bunch Evolution on Vicinal Faces of KDP

For in-situ studies of the formation and evolution of step patterns in solution growth, we have assembled an experimental setup based on Michelson interferometry with the growing crystal surface as one of the reflective surfaces. The device allows data collection over a relatively large area (approximately 4 sq. mm) in situ and in real time during growth. The depth resolution is improved over traditional interferometry using phase-shifted images combining by a suitable algorithm. We achieve a depth resolution of approximately 50 Angstroms. Lateral resolution, dependent on the degree of magnification, is around 0.3 to 5 microns. The crystal chosen as a model in this work is potassium dihydrogen phosphate (KDP), the optically non-linear material widely used in frequency doubling applications. Kinetics of KDP crystallization is well studied so that KDP can serve as a benchmark for our investigations. We present quantitative results on the onset, initial stages and development of instabilities in moving step trains on vicinal crystal surfaces at varying supersaturation, flow rate, and flow direction. The kinetics data suggest that at low supersaturations, step bunching is caused by impurity retardation of the steps, while at higher supersaturations, we link the non-linearity during growth to interdependence of the velocity and density of the steps evidenced in independent experiments. The behavior on the surface is very dynamic, small bunches both merge and split from larger bunches as they travel across the facet. We present evidence that despite these dynamics, under steady conditions there exists a limiting value to step bunch height. This height is reached at distances between 600 and 1000 microns from the step source. In our experiments, we observed the retention of this step bunch height limit up to the path of 1500 microns.

Booth, N. A.↗
NASA NTRS2008

3D PIC Simulation of the Magnetosphere during IMF Rotation from North to South: Signatures of Substorm Triggering in the Magnetotail

Three dimensional PIC simulations are performed in order to analyse the dynamics of the magnetotail as the interplanetary magnetic field (IMF) rotates from northward to southward direction. This dynamics reveals to be quite different within meridian/equatorial planes over two successive phases of this rotation. First, as IMF rotates from North to Dawn-Dusk direction, the X-Point (magnetic reconnection) evidenced in the magnetotail (meridian plane) is moving earthward (from x=-35 Re to x=-17.5 ) distance at which it stabilizes. This motion is coupled with the formation of "Crosstail-S" patterns (within the plane perpendicular to the Sun-Earth mine) through the neutral sheet in the nearby magnetotail. Second, as IMF rotates from dawn-dusk to South, the minimum B field region is expanding within the equatorial plane and forms a ring. This two-steps dynamics is analyzed in strong association with the cross field magnetotail current Jy, in order to recover the signatures of substorms triggering.

Nishikawa, Ken-Ichi↗
NASA NTRS2020

Eta Carinae & the Homunculus: Far Infrared Sub-millimeter Spectral Lines detected with the Herschel Space Observatory

The evolved massive binary star η Carinae underwent eruptive mass loss events that formed the complex bi-polar “Homunculus” nebula harboring tens of solar masses of unusually nitrogen-rich gas and dust. Despite expectations for the presence of a significant molecular component to the gas, detections have been observationally challenged by limited access to the far-infrared and the intense thermal continuum. A spectral survey of the atomic and rotational molecular transitions was carried out with theHerschel Space Observatory, revealing a rich spectrum of broad emission lines originating in the ejecta. Velocity profiles of selected PACS lines correlate well with known substructures: Hi in the central core; NH and weak [Cii] within the Homunculus; and [Nii] emissions in fast-moving structures external to the Homunculus.We have identified transitions from [Oi], Hi, and 18 separate light C- and O-bearing molecules including CO, CH, CH+, and OH, and a wide set of N-bearing molecules,NH, NH+, N2H+, NH2, NH3, HCN, HNC, CN, and N2H+. Half of these are new detections unprecedented for any early-type massive star environment. A very low ratio[12C/13C]≤4 is estimated from five molecules and their isotopologues. We demonstrate that non-LTE effects due to the strong continuum are significant. Abundance patterns are consistent with line formation in regions of carbon and oxygen depletions with nitrogen enhancements, reflecting an evolved state of the erupting star with efficient transport of CNO-processed material to the outer layers. The results offer many opportunities for further observational and theoretical investigations of the molecular chemistry under extreme physical and chemical conditions around massive stars in their final stages of evolution.

T. R. Gull↗
NASA NTRS1994

Radiographic Moire

A method for the x-ray inspection of materials making use of the Moire effect is described. The Moire effect results when two patterns are superimposed; a third pattern is produced. Any change in either of the first two patterns creates a change in the third. Moire inspection is common with visible light. This invention allows the technique to be extended to locations inaccessible to visual inspection. A first pattern of high radio contrast material is attached to or included in the sample. X-rays are projected through the sample. A second pattern is imposed at the observation point, either before or after the formation of the x-ray image. The two patterns interact to create a third, Moire, pattern. As the material is stressed the Moire pattern changes, the degree of change indicating the degree of stress.

Madaras, Eric Irvine↗
NASA NTRS1996

Radiographic moire

A method for the x-ray inspection of materials making use of the Moire effect is described. The Moire effect results when two patterns are superimposed, a third pattern is produced. Any change in either of the first two patterns creates a change in the third. Moire inspection is common with visible light, this invention allows the technique to be extended to locations inaccessible to visual inspection. A first pattern of high radio contrast material is attached to or included in the sample. X-rays are projected through the sample. A second pattern is imposed at the observation point, either before or after the formation of the x-ray image. The two patterns interact to create a third, Moire, pattern. As the material is stressed the Moire pattern changes, the degree of change indicating the degree of stress.

Madaras, Eric I.↗
NASA NTRS1992

Global correlation of volcanic centers on Venus with uplands and with extension: Influence of mantle convection and altitude

The observed distribution of volcanism on Venus and its associations with geologic and tectonic characteristics are examined for significant global-scale tectonic, mantle, and volcanic influences. We find that volcanic centers are correlated geologically with zones of extension, infrequent in lowland regions, and infrequent in regions with evidence for tectonic shortening. In addition, volcanic centers are significantly concentrated in a broad region at least 10,000 km in diameter between Beta, Alta, and Themis Regiones. This area is nearly hemispheric in scale and coincides spatially with the area of greatest concentration of extensional characteristics. Our analysis suggests that the observed distribution patterns of volcanic centers reflect the regional patterns of extension, the origin of the extension and volcanism are closely related, and the hemispheric scale of both patterns implies a deep-seated origin such as large-scale interior mantle dynamic patterns. However, altitude-dependent effects on both the formation and preservation of volcanic centers could also strongly influence the observed distribution pattern.

Crumpler, L. S.↗
NASA NTRS1984

Temporal evolution of the solar wind and the formation of a standing shock

The temporal evolution of the solar wind from one steady state to another is explored when momentum deposition produces multiple critical points in the flow. It is shown that the wind always evolves in time to a new steady state compatible with the solution of the steady state equation of motion. However, for the same initial state and identical asymptotic momentum deposition rate, the temporal evolution pattern of the wind depends on the detailed time history of momentum addition and is therefore not unique. This feature plays an important role in the particular case when multiple (three in this study) steady states exist for identical boundary conditions; each one of these solutions is thus shown to be physically accessible. The details of the temporal evolution pattern of the wind reveal the formation of a shock discontinuity whenever the flow becomes supersonic at a critical point upstream from the initial critical point. If the flow remains supersonic at that inner critical point, the shock can become a standing one, depending on the strength and the temporal history of momentum addition. The results of this study indicate that the time scale required for the solar wind to evolve between steady states is of the order of 30-60 hours. Furthermore, the results also reveal the interesting and novel phenomenon that a standing shock is likely to develop in the inner solar wind flow within this time frame, in particular, in coronal hole regions with rapidly diverging geometries.

Habbal, S. R.↗
NASA NTRS2010

In Situ Determination of Siderophile Trace Elements in Metals and Sulfides in Enstatite Achondrites

Enstatite meteorites are identified by their extremely reduced mineralogy (1) and similar oxygen isotope composition (2). The enstatite meteorite clan incorporates both EH and EL chondrites, as well as a wide variety of enstatite achondrites, such as aubrites or anomalous enstatite meteorites (e.g. Mt. Egerton, Shallowater, Zaklodzie, NWA 2526). The role of nebular versus planetary processes in the formation of enstatite meteorites is still under debate (e.g. 3-5). Past studies showed a significant influence of metal segregation in the formation of enstatite achondrites. Casanova et al. (6) suggested incomplete metal-silicate segregation during core formation and attributed the unfractionated siderophile element patterns in aubrites metals to a lack of fractional crystallization in a planetary core. Recent studies suggest a significant role of impact melting in the formation of primitive enstatite chondrites (7) and identified NWA 2526 as a partial melt residue of an enstatite chondrite (8). To understand the nature of siderophile element-bearing phases in enstatite achondrites, establish links between enstatite achondrites and enstatite chondrites (9), and constrain planetary differentiation on their respective parent bodies and their petrogenetic histories, we present laser ablation ICP-MS measurements of metal and sulfide phases in Shallowater, Mt. Egerton, and the aubrites Aubres, Cumberland Falls, and Mayo Belwa.

vanAcken, D.↗
NASA NTRS1975

Accuracy, resolution, and cost comparisons between small format and mapping cameras for environmental mapping

Successful aerial photography depends on aerial cameras providing acceptable photographs within cost restrictions of the job. For topographic mapping where ultimate accuracy is required only large format mapping cameras will suffice. For mapping environmental patterns of vegetation, soils, or water pollution, 9-inch cameras often exceed accuracy and cost requirements, and small formats may be better. In choosing the best camera for environmental mapping, relative capabilities and costs must be understood. This study compares resolution, photo interpretation potential, metric accuracy, and cost of 9-inch, 70mm, and 35mm cameras for obtaining simultaneous color and color infrared photography for environmental mapping purposes.

Clegg, R. H.↗