Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase shift”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

The effect of temperature on attenuation-correction schemes in rain using polarization propagation differential phase shift

The study elucidates and quantifies differences in the response of the rate of change of polarization propagation differential phase shift Phi, the rate of attenuation for a horizontally/vertically polarized wave A(H,V), and the rate of polarization differential attenuation A(H-V) to temperature. It is shown that if the effects of temperature when estimating A(H) and A(H-V) from Phi are neglected, the average fractional standard error increases only slightly at 9 GHz but significantly at 5 and 3 GHz. Errors at 5 and 3 GHz are about two to three times those at 9 GHz. The performance of Phi-based schemes of attenuation correction at these lower frequencies is much more significantly degraded by temperature uncertainty than at 9 GHz. It is concluded that it is best to use Phi to correct for attenuation at the least-attenuating frequencies.

Jameson, A. R.↗

Triple Phase-Shift Optimization of SiC-based Dual-Active Bridge DC/AC Converter

This paper presents a loss-optimized Triple Phase-Shift (TPS) switching strategy for Dual-Active Bridge (DAB) based converters. The proposed strategy considers minimizing total converter loss with respect to minimizing device rms cur-rents, enabling Zero-Voltage Switching (ZVS) turn-on of devices and accurate control of device turn-off current. A model for switching currents is presented, followed by a loss model and optimization strategy. A 1.3kV/100kW prototype based on SiC MOSFETs was used in this work and experimental results up to 10kW show the proposed TPS strategy to be more efficient for operation.

Vetrivelan, Adithyan↗

An alternative approach to estimating rainfall rate by radar using propagation differential phase shift

In this work it is shown that for frequencies from 3 to 13 GHz, the ratio of the specific propagation differential phase shift phi(sub DP) to the rainfall rate can be specified essentially independently of the form of the drop size distribution by a function only of the mass-weighted mean drop size D(sub m). This significantly reduces one source of substantial bias errors common to most other techniques for measuring rain by radar. For frequencies 9 GHz and greater, the coefficient can be well estimated from the ratio of the specific differential attenuation to phi(sub DP), while at nonattenuating frequencies such as 3 GHz, the coefficient can be well estimated using the differential reflectivity. In practice it appears that this approach yields better estimates of the rainfall rate than any other current technique. The best results are most likely at 13.80 GHz, followed by those at 2.80 GHz. An optimum radar system for measuring rain should probably include components at a both frequencies so that when signals at 13.8 GHz are lost because of attenuation, good measurements are still possible at the lower frequency.

Jameson, A. R.↗

A Fundamental Frequency Sorting Algorithm for Capacitor Voltage Balance of Modular Multilevel Converter With Low-Frequency Carrier Phase Shift Modulation

This paper proposes a fundamental frequency sorting algorithm for balancing the floating capacitors in modular multilevel converters with low-frequency carrier phase shift modulation. The relationship between the driving pulses and submodules (SMs) is rebuilt in every fundamental period by sorting the voltage increments and present voltages. Besides, an improved and simplified strategy is proposed to predict the charging abilities of the driving pulses, so as to avoid sorting the voltage increments. Based on the proposed method, the switching frequency of each power device and the carrier frequency are identical, which reduces the operational losses for applications regarding high power. At the same time, the sorting frequency is as low as the fundamental frequency, which alleviates a large amount of computational cost, and the necessity to measure arm currents is omitted. In this case, the arm current sensors are eliminated, and simplified communication among the central controller and the local ones is set up. Finally, a three-phase 1-MVA simulation platform with 120 SMs and a down-scaled 6-kVA experimental prototype with 48 SMs are constructed to validate the proposed approach.

42 ENGINEERING↗

SU-E-T-410: Fringe Stability and Phase Shift Measurements in a Michelson Interferometer for Optical Calorimetry

Purpose: To identify the variables limiting the resolution of a Michelson interferometer used to measure phase shifts (PS) in water as part of a radiometric calorimeter. Methods: We investigated the output stability of a He-Ne laser and a laser diode. The short and long term stability of the fringe pattern in a Michelson interferometer was tested with different types of lasers, thermal insulation arrangements, damping systems and optical mounts to optimize system performance. PS were induced by electrically heating water in a 1 cm quartz cuvette located in one of the interferometer arms. The PS was calculated from fringe intensity changes and compared to a calculated PS using thermocouple-measured temperature changes in the water. Results: The intensity of the laser diode is more stable, but the gas laser’s profile is more suitable for fringe analysis and has better temporal coherence. The laser requires a warm-up time of 4 hours before its output is stabilized (SNR>95). The fringe’s stability strongly depends on the thermal insulation. When the interferometer is exposed to ambient temperature swings of 0.7 K, it is not possible to stabilize the fringe pattern. Enclosing the system in a 2.5 cm-thick Styrofoam box improves the SNR, but further insulation will be needed to increase the SNR above 50. High frequency noise is significantly reduced by damping the system.Inducing a temperature rise in water, starting at 299 K, the average temperature increase for a 2π PS is 0.29 ± 0.02 K and the proportionality constant is -21.1 ± 0.8 radians/K. This is 5.8% lower than the calculated value using the thermocouple. Conclusion: Interferometric PS measurements of temperature may provide an alternative to thermistors for water calorimetry. The resolution of the current prototype is limited by ambient temperature stability. Calculated and measured thermally-induced PS in water agreed to within 5.8%.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Spectrally resolved phase-shifting interference microscopy: technique based on optical coherence tomography for profiling a transparent film on a patterned substrate

Spectrally resolved white-light phase-shifting interference microscopy has been used for measurements of the thickness profile of a transparent thin-film layer deposited upon a patterned structure exhibiting steps and discontinuities. We describe a simple technique, using an approach based on spectrally resolved optical coherence tomography, that makes it possible to obtain directly a thickness profile along a line by inverse Fourier transformation of the complex spectral interference function.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multicolor Holography With Phase Shifting

Prototype apparatus constructed to test feasibility of two-color holographic interferometric scheme in which data for reconstructing holographic wavefront obtained with help of phase-shifting technique. Provides two sets of data needed to solve equations for effects of temperature and concentration. Concept extended to holography at three or more wavelengths to measure three or more phenomena associated with significant variations in index of refraction

Vikram, Chandra S.↗

The use of TWT amplifiers in M-ary amplitude and phase shift keying systems

A great deal of research is presently being conducted to study modulation schemes in order to reduce the bandwidth of digital communications. These M-ary amplitude and phase shift keying (MAPSK) modulation systems place new requirements on TWT amplifiers in space applications in that the various signal sets usually include two or more discrete output power levels as well as discrete phases at each power level. This paper presents a variety of predistortion schemes to circumvent the TWT problems of AM distortion and AM-to-PM conversion in order to produce MAPSK signal sets. A feedback scheme is presented to correct for long-term phase and amplitude drifts in the transmitter. A complete transmitter is proposed using predistortion to produce the desired MAPSK signal set at very high data rates including the possible use of a feedback stabilization scheme.

Weber, W. J., III↗

Patterning of self-assembled monolayers by phase-shifting mask and its applications in large-scale assembly of nanowires

A nonselective micropatterning method of self-assembled monolayers (SAMs) based on laser and phase-shifting mask (PSM) is demonstrated. Laser beam is spatially modulated by a PSM, and periodic SAM patterns are generated sequentially through thermal desorption. Patterned wettability is achieved with alternating hydrophilic/hydrophobic stripes on octadecyltrichlorosilane monolayers. The substrate is then used to assemble CdS semiconductor nanowires (NWs) from a solution, obtaining well-aligned NWs in one step. Our results show valuably the application potential of this technique in engineering SAMs for integration of functional devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simple demodulator for telemetry phase- shift keyed subcarriers

Circuit, suitable for operation at high signal-to-noise ratio environments, recovers pulse-code modulated data from digital telemetry systems which use phase-shift keyed subcarrier techniques. This demodulator is easily constructed from microcircuit elements and may be applied where low-cost, relatively high-level signal systems are used.

Couvillon, L. A.↗

Thickness measurement of transparent glass plates using a lateral shearing cyclic path optical configuration setup and polarization phase shifting interferometry

We present a measurement technique to determine the thickness of a transparent glass plate (GP) by using a lateral shearing cyclic path optical configuration (CPOC) setup and polarization phase shifting interferometry (PPSI). In the technique, the GP introduces a longitudinal shift in the focus of the beam and, as a result, a spherical wavefront emerges from the lens, which is otherwise set for producing a collimated beam. Using CPOC, two laterally sheared orthogonally polarized beams are generated from the incident spherical wavefront. By applying PPSI, the slope of the optical path difference variation between the laterally sheared interfering beams is evaluated, and the radius of the spherical wavefront and the longitudinal shift of the beam focus are calculated. The thickness of the GP is determined from the standard relation between the longitudinal shift of the focus introduced by the GP and the thickness of the GP. Results obtained for a GP of 9.810mm thickness are presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

RACE and Calculations of Three-dimensional Distributed Cavity Phase Shifts

The design for RACE, a Rb-clock flight experiment for the ISS, is described. The cold collision shift and multiple launching (juggling) have important implications for the design and the resulting clock accuracy and stability. We present and discuss the double clock design for RACE. This design reduces the noise contributions of the local oscillator and simplifies and enhances an accuracy evaluation of the clock. As we try to push beyond the current accuracies of clocks, new systematic errors become important. The best fountain clocks are using cylindrical TE(sub 011) microwave cavities. We recently pointed out that many atoms pass through a node of the standing wave microwave field in these cavities. Previous studies have shown potentially large frequency shifts for atoms passing through nodes in a TE(sub 013) cavity. The shift occurs because there is a small traveling wave component due to the absorption of the copper cavity walls. The small traveling wave component leads to position dependent phase shifts. To study these effects, we perform Finite Element calculations. Three-dimensional Finite Element calculations require significant computer resources. Here we show that the cylindrical boundary condition can be Fourier decomposed to a short series of two-dimensional problems. This dramatically reduces the time and memory required and we obtain (3D) phase distributions for a variety of cavities. With these results, we will be able to analyze this frequency shift in fountain and future space clocks.

Li, Ruoxin↗

Eikonal phase shift analyses of carbon-carbon scattering

A high-energy double-folding optical potential approximation to the exact nucleus-nucleus multiple-scattering series is used in determining eikonal phase shifts for carbon-carbon scattering at 204.2, 242.7, and 288.6 MeV. The double-folding potentials are derived by folding the energy-dependent free nucleon-nucleon interaction with densities for the projectile and target; these latter are obtained by unfolding the finite nucleon charge density from harmonic-well carbon charge distributions. The charge parameters for these distributions are taken from the results of electron scattering experiments. Predictions are made for total, reaction, and elastic differential cross sections using standard partial wave analysis for the scattering of identical particles and are then compared with recent experimental results. Excellent agreement is obtained despite the absence of arbitrarily adjusted parameters in the theory.

Townsend, L. W.↗

Equal-Path, Phase-Shifting, Sample-Point Interferometer

Proposed interferometer combination of sample-point interferometer and equal-path interferometer. Used to monitor optical figures of arrays of mirrors or of segmented mirrors. Incorporation of phase shifting with part of equal-path interferometer renders new interferometer insensitive to vibration and air turbulence. Instrument used over large distances, on ground, or on vibrating structures.

Manhart, Paul K.↗

Measuring rainwater content by radar using propagation differential phase shift

While radars measure several quantities closely coupled to the rainfall rate, for frequencies less than 15 GHz, estimates of the rainwater content W are traditionally computed from the radar reflectivity factor Z or the rate of attenuation A--quantities only weakly related to W. Consequently, instantaneous point estimates of W using Z and A are often erroneous. A more natural, alternative parameter for estimating W at these frequencies is the specific polarization propagation differential phase shift phi(sub DP), which is a measure of the change in the difference between phases of vertically (V) and horizontally (H) polarized waves with increasing distance from a radar. It is now well known that W is nearly linearly related to phi(sub DP) divided by (1 - reversed R), where reversed R is the mass-weighted mean axis ratio of the raindrops. Unfortunately, such relations are not widely used in part because measurements of phi(sub DP) are scarce but also because one must determine reversed R. In this work it is shown that this parameter can be estimated using the differential reflectivity (Z(sub H)/Z(sub V) at 3 GHz. An alternative technique is suggested for higher frequencies when the differential reflectivity becomes degraded by attenuation. While theory indicates that it should be possible using phi(sub DP) to estimate W quite accurately, measurement errors increase the uncertainty to +/- 18%-35% depending on reversed R. While far from ideal, it appears that these estimates are likely to be considerably more accurate than those deduced using currently available methods.

Jameson, A. R.↗

Even aberration measurement of lithographic projection optics based on intensity difference of adjacent peaks in alternating phase-shifting mask image

We propose an in situ technique for measuring an even aberration of lithographic projection optics. By using the Hopkins theory of partially coherent imaging and the thick-mask model, the linear relationship between the intensity difference of adjacent peaks in an alternating phase-shifting mask image and an even aberration is established by equations and verified by numerical results. The sensitivity of measuring the even aberration of lithographic projection optics based on this linear relationship is analyzed, and the measurement mark is designed accordingly. Measurement performance of the present technique is evaluated using the lithographic simulator PROLITH, which shows that the present technique is capable of measuring the even aberration of lithographic projection optics with ultrahigh measurement accuracy.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗