A high-efficiency electronically scanned K-band phased array for spaceborne radiometric applications.
Two dimensional electronically scanned k-band phased array antenna design and performance, discussing radiometric system
Fujioka, J. K.↗
SEARCH · Search NASA
Results for “Phased array”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Phased array antennas for applications on spacecraft.
This is a survey paper wherein phased array antenna systems, now operating on spacecraft, are reviewed so as to reveal their basic techniques of beam formation, steering, and receive/transmit (transponder) functions. Laboratory developmental antennas, designed for ultimate spacecraft flight qualification, are assessed in terms of the needs of communications, earth resources instrumentation, and area surveillance.
Kummer, W. H.↗
Wide Angle Liquid Crystal Optical Phased Array
Accurate modeling of a high resolution, liquid crystal (LC) based, optical phased array (OPA) is shown. The simulation shows excellent agreement with a test 2-D LC OPA. The modeling method is extendable to cases where the array element size is close to the wavelength of light. The fringing fields of such a device are first studied, and subsequently reduced. This results in a device that demonstrates plus or minus 7.4 degrees of continuous beam steering at a wavelength of 1550 nm, and a diffraction efficiency (DE) higher than 72%.
Wang, Xing-Hua↗
Phased array antenna control
Several new and useful improvements in steering and control of phased array antennas having a small number of elements, typically on the order of 5 to 17 elements are provided. Among the improvements are increasing the number of beam steering positions, reducing the possibility of phase transients in signals received or transmitted with the antennas, and increasing control and testing capacity with respect to the antennas.
Doland, G. D.↗
Feasibility study of a radiator and power divider for 50 - 60 GHz phased array
Feasibility study of radiator and power divider for 50 to 60 GHz phased array - graphs
Green, K. A.↗
NASA Adaptive Multibeam Phased Array (AMPA): An application study
The proposed orbital geometry for the adaptive multibeam phased array (AMPA) communication system is reviewed and some of the system's capabilities and preliminary specifications are highlighted. Typical AMPA user link models and calculations are presented, the principal AMPA features are described, and the implementation of the system is demonstrated. System tradeoffs and requirements are discussed. Recommendations are included.
Mittra, R.↗
Solid-state retrodirective phased array concepts for microwave power transmission from Solar Power Satellite
Two prototype solid-state phased array systems concepts for potential use in the Solar Power Satellite are described. In both concepts, the beam is centered on the rectenna by means of phase conjugation of a pilot signal emanating from the ground. Also discussed is on-going solid-state amplifier development.
Schroeder, K. G.↗
Phased arrays for meteorological satellite
Analysis and evaluation of critical components of Ku-band phased array antenna for meteorological satellite
Profera, C. E., Jr.↗
Phased array step recovery diode modules Final engineering report
Step recovery diode multipliers to control phase of microwave phased array antenna systems
Source record↗
Adaptive ground implemented phased array
Tests were conducted to determine the feasibility of using an adaptive ground implemented phased array (AGIPA) to overcome the limitations of the radio frequency interference limited low data Tracking and Data Relay Satellite VHF return link. A feasibility demonstration model of a single user channel AFIPA system was designed, developed, fabricated, and evaluated. By scaling the frequency and aperture geometry from VHF to S-band, the system performance was more easily demonstrated in the controlled environment of an anechoic chamber. The testing procedure employs an AGIPA in which received signals from each element of the array are processed on the ground to form an adaptive, independent, computer controlled beam for each user.
Smith, J. M.↗
Optical RF distribution links for MMIC phased array antennas
Conventional methods to distribute RF signals to GaAs Monolithic Microwave Integrated Circuits Phased Array Antennas are inadequate for arrays having large numbers of elements. Optical RF distribution links have been proposed as a lightweight, mechanically flexible, and low volume solution. Three candidate techniques for providing optical RF distribution are discussed along with the electro-optic devices required to configure them. A discussion of the present status of applicable electro-optics devices is also included.
Kunath, Richard R.↗
Jet Noise Source Localization Using Linear Phased Array
A study was conducted to further clarify the interpretation and application of linear phased array microphone results, for localizing aeroacoustics sources in aircraft exhaust jet. Two model engine nozzles were tested at varying power cycles with the array setup parallel to the jet axis. The array position was varied as well to determine best location for the array. The results showed that it is possible to resolve jet noise sources with bypass and other components separation. The results also showed that a focused near field image provides more realistic noise source localization at low to mid frequencies.
Agboola, Ferni A.↗
Phased array antenna for space shuttle orbiter
The National Aeronautics and Space Administration is developing a distributed phased array antenna at the Lyndon B. Johnson Space Center as a possible upgrade for the Space Shuttle Orbiter S-band phase modulation communications system. The antenna consists of an eight-element transmit section, eight-element receive section, and a single L-band receive element. The antenna design is constrained by the existing Orbiter system and space environment. The solution to the interface design problems led to an antenna system which provides improved link margins and yet supports previous operational configurations. This paper describes the system development, antenna hardware, and the interface consideration which led to the final design.
Davidson, Shayla E.↗
Design of a K-Band Transmit Phased Array For Low Earth Orbit Satellite Communications
The design of a light weight, low cost phased array antenna is presented. Multilayer printed wiring board (PWB) technology is utilized for Radio Frequencies (RF) and DC/Logic manifold distribution. Transmit modules are soldered on one side and patch antenna elements are on the other, allowing the use of automated assembly processes. The 19 GHz antenna has two independently steerable beams, each capable of transferring data at 622 Mbps. A passive, self-contained phase change thermal management system is also presented.
Watson, Thomas↗
Distortion generated in angle-modulation systems by phased arrays
The magnitude and characteristics of distortion produced in demodulated signals by corporate-fed phased arrays are reviewed. Graphs depicting distortion, plotted as a function of signal characteristics and array geometry, display the effects of large arrays on broadband signals. These curves show that distortion in angle-modulation systems is more a function of modulation index than of bandwidth. The data presented provide a basis for predicting distortion levels in practical array systems and for extending analyses to other signal-array configurations.
Rogers, J. D.↗
A method for detection of deformations in large phase array antennas for spaceborne synthetic aperture radars
A method to measure deformations in large, planar phased array antennas used in spaceborne synthetic aperture radars (SAR) is described. This method has the advantages that the deformation measurements can be performed anywhere in orbit and that no additional sensor is required. Indirect test results using the SEASAT SAR data indicate that this technique can detect deformations of small fractions of a wavelength.
Li, F. K.↗
Adaptive multibeam phased array design for a Spacelab experiment
The parametric tradeoff analyses and design for an Adaptive Multibeam Phased Array (AMPA) for a Spacelab experiment are described. This AMPA Experiment System was designed with particular emphasis to maximize channel capacity and minimize implementation and cost impacts for future austere maritime and aeronautical users, operating with a low gain hemispherical coverage antenna element, low effective radiated power, and low antenna gain-to-system noise temperature ratio.
Noji, T. T.↗
Microwave monolithic integrated circuit development for future spaceborne phased array antennas
The development of fully monolithic gallium arsenide (GaAs) receive and transmit modules suitable for phased array antenna applications in the 30/20 gigahertz bands is presented. Specifications and various design approaches to achieve the design goals are described. Initial design and performance of submodules and associated active and passive components are presented. A tradeoff study summary is presented highlighting the advantages of distributed amplifier approach compared to the conventional single power source designs.
Anzic, G.↗