Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pine”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Drivers and ecological impacts of a wildfire outbreak in the southern Appalachian Mountains after decades of fire exclusion

During one of the warmest and driest droughts of the last century, the southern Appalachian Mountains experienced a regional outbreak of over a dozen large wildfires in late fall of 2016. We provide a synthesis of long-term forest changes leading up to the 2016 wildfires, examine the climatic setting and patterns of burn severity in relationship to topography, and discuss the ecological and management implications of these and future fires. During the pre- and post-European settlement periods, frequent low- and mixed-severity wildfires interacted with complex topographic gradients and maintained heterogenous landscapes dominated by several species of oak (Quercus spp.), pine (Pinus spp.), and the American chestnut (Castanea dentata). Land-use changes associated with European settlement, loss of the American chestnut, and 20th century fire exclusion resulted in large scale shifts towards mesic, fire-intolerant species (i.e. mesophication). Wildfire activity began increasing in the early 1980s, but most fires in the region are small (<1,000 ha). In Fall of 2016, deciduous tree leaf fall occurred concurrently with a period of anomalously dry and warm weather, creating ideal conditions for fire ignition and spread. Thousands of ignitions across the region strained suppression resources and eight fires grew to greater than 5,000 ha. The 2016 fires were larger and burned more area than in the previous three decades combined. In one unique landscape setting, the Chimney Tops 2 Fire, a synoptic wind event drove extreme fire behavior and burned large, high-severity patches resulting in devastating effects in the wildland urban interface. However, immediate post-fire burn severity mosaics for other fires were composed primarily of low- (73 %) and moderate-severity (21 %) fire effects. High-severity fire comprised only 6 % of the area burned, and occurred mostly on steep upper slopes and ridges on south-facing aspects, reflecting the importance of bottom-up topographic drivers in this region. Although the fires will likely enhance biodiversity by restoring fire-dependent species and creating early seral habitat, invasions of non-native plant species, delayed mortality of mature pines and oaks, and rapid re-sprouting of pyrophyllic shrubs pose significant management challenges. Although similar large fire outbreaks may become more common under future climatic conditions, they are unlikely to reverse the effects of mesophication and significantly alter forest dynamics at broad spatial scales. Furthermore, the 2016 fires exposed the vulnerability of the region to wildfire during acute fall drought and demonstrate the potential ecological effects of future wildfires in mixed pine-hardwood landscapes of the southern Appalachians.

54 ENVIRONMENTAL SCIENCES↗

Climate Warming Alters Nutrient Storage in Seasonally Dry Forests: Insights From a 2,300 m Elevation Gradient

Understanding potential response of forest carbon (C) and nutrient storage to warming is important for climate mitigation policies. Unfortunately, those responses are difficult to predict in seasonally dry forests, in part, because ecosystem processes are highly sensitive to both changes in temperature and precipitation. We investigated how warming might alter stocks of C, nitrogen (N), and phosphorus (P) in vegetation and the entire regolith (soil + weathered bedrock or “saprock”) using a space-for-time substitution along a bioclimatic gradient in the Sierra Nevada, California. The pine-oak and mixed-conifer forests between 1,160–2,015 m elevation have more optimal climates (not too dry or hot) for ecosystem productivity, soil weathering, and cycling of essential elements than the oak savannah (405 m) and subalpine forest (2,700 m). We found decreases in overstory vegetation nutrient stocks with decreasing elevation because of enhanced water limitation and greater occurrence of disturbances. Stocks of C, N, and P in the entire regolith peaked at the pine-oak and mixed-conifer forests across the bioclimatic gradient, driven by thicker regolith profiles and greater nutrient input rates. These observations suggest long-term warming will decrease ecosystem nutrient storage at the warmer, transitional pine-oak zone, but will increase nutrient storage at the colder, subalpine zone. Assuming steady-state conditions, we found the mean residence time of ecosystem C decreased with projected rising air temperatures and increased following a major drought event across the bioclimatic gradient. Our study emphasizes potentially elevation-dependent changes in nutrient storage and C persistence with warming in seasonally dry forests.

54 ENVIRONMENTAL SCIENCES↗

Habitat-specific seasonal densities of sympatric raccoons and opossums in the southeastern United States

Raccoon and opossum densities have implications for rabies management, but estimates of seasonal densities of both species are lacking for rural nonagricultural habitats of the southeastern United States, a core portion of their geographic range. Consequently, it remains unclear whether the densities of 1 species limit the other, which is possible considering their substantial niche overlap. We carried out a mark–recapture study of raccoons and opossums in 4 rural nonagricultural habitats (bottomland hardwood forest, riparian forest, upland pine forest, and isolated wetlands) in South Carolina, United States (2020 to 2022), and combined this with previous data from the same habitats (2017 to 2019) to estimate habitat-specific spring and fall densities. Raccoon densities ranged from 5.17 ± 0.96 animals/km 2 (bottomland hardwood fall) to 1.63 ± 0.83 animals/km 2 (upland pine spring) and were on average 19% higher in fall compared to spring. Opossum densities ranged from 10.35 ± 1.98 animals/km 2 (bottomland hardwood fall) to 1.11 ± 1.55 animals/km 2 (upland pine spring) with divergent seasonal patterns among habitats. These low densities across all habitats compared to other studies are likely the result of low resource availability, consistent with other habitats that have minimal anthropogenic influence. We observed a positive association between raccoon and opossum densities across trapping grids, suggesting that raccoons do not suppress opossum densities, but that densities of both species increase with increasing resource availability. Furthermore, our results can be used to inform oral rabies vaccination efforts such as refining bait densities and timing of bait distribution in these habitats.

60 APPLIED LIFE SCIENCES↗

Group size mediates effects of intraspecific competition and forest structure on productivity in a recovering social woodpecker population

Conservation of endangered social wildlife in disturbance-prone forests is challenging because direct and indirect effects of management strategies developed at the time of species’ listing when population density is low may change under high-density conditions in locally recovered populations. Here, we used piecewise structural equation modeling to evaluate direct and indirect drivers of productivity in the federally endangered cooperatively breeding red-cockaded woodpecker Dryobates borealis (RCW) on Savannah River Site, South Carolina, USA. We estimated direct and indirect relationships among group size, neighboring group sizes, fledgling production, density of cavity tree clusters occupied by RCWs, area satisfying threshold criteria of ≥22 stems ha –1 of pines ≥35.6 cm diameter at breast height (dbh), <1.4 m 2 ha –1 basal area (BA) of hardwoods 7.6–22.9 cm dbh, and <6% hardwood canopy cover, and area treated with prescribed fire, and tested whether group size mediated indirect effects of area satisfying threshold criteria on fledgling production. Increases in area with ≥22 stems ha –1 of pines ≥35.6 cm dbh and <1.4 m 2 ha –1 BA of hardwoods 7.6–22.9 cm dbh, and area treated with prescribed fire, but not area with <6% hardwood canopy cover, had direct positive effects on group size. Group size and area treated with prescribed fire, but not area satisfying threshold criteria, had direct positive effects on fledgling production. The direct effect of neighboring group sizes on fledgling production was negative and smaller relative to the direct positive effect of group size on fledgling production. Overall, our results indicate positive direct effects of group size on fledgling production outweighed negative direct effects of neighboring group sizes, and that group size mediated positive indirect effects of area satisfying structural threshold criteria on fledgling production. These findings indicate that ongoing forest management aimed to increase area with ≥22 pines ha –1 ≥35.6 cm dbh and <1.4 m 2 ha –1 BA of hardwoods 7.6–22.9 cm dbh will promote large group sizes, which in turn improve fledgling production and offset costs of heightened competition with neighboring groups under high-density conditions. Additionally, positive effects of area treated with prescribed fire on RCW group size and fledgling production indicate prescribed fire has unique contributions to woodpecker productivity, likely via direct effects on forest structure and potentially indirect effects on arthropod prey available to foraging RCWs. Furthermore, by simultaneously accounting for multiple drivers of productivity in social wildlife, our study contributes to the understanding of how increases in social wildlife population sizes can alter previously documented habitat-fitness relationships.

prescribed fire↗

Impacts of uncertain feedstock quality on the economic feasibility of fast pyrolysis biorefineries with blended feedstocks and decentralized preprocessing sites in the Southeastern United States

Abstract This study performs techno‐economic analysis and Monte Carlo simulations (MCS) to explore the effects that variations in biomass feedstock quality have on the economic feasibility of fast pyrolysis biorefineries using decentralized preprocessing sites (i.e., depots that produce pellets). Two biomass resources in the Southeastern United States, that is, pine residues and switchgrass, were examined as feedstocks. A scenario analysis was conducted for an array of different combinations, including different pellet ash control levels, feedstock blending ratios, different biorefinery capacities, and different biorefinery on‐stream capacities, followed by a comparison with the traditional centralized system. MCS results show that, with depot preprocessing, variations in the feedstock moisture and feedstock ash content can be significantly reduced compared with a traditional centralized system. For a biorefinery operating at 100% of its designed capacity, the minimum fuel selling price (MFSP) of the decentralized system is $3.97–$4.39 per gallon gasoline equivalent (GGE) based on the mean value across all scenarios, whereas the mean MFSP for the traditional centralized system was $3.79–$4.12/GGE. To understand the potential benefits of highly flowable pellets in decreasing biorefinery downtime due to feedstock handling and plugging problems, this study also compares the MFSP of the decentralized system at 90% of its designed capacity with a traditional system at 80%. The analysis illustrates that using low ash pellets mixed with switchgrass and pine residues generates a more competitive MFSP. Specifically, for a biorefinery designed for 2,000 oven dry metric ton per day, running a blended pellet made from 75% switchgrass and 25% pine residues with 2% ash level, and operating at 90% of designed capacity could make an MFSP between $4.49 and $4.71/GGE. In contrast, a traditional centralized biorefinery operating at 80% of designed capacity marks an MFSP between $4.72 and $5.28.

09 BIOMASS FUELS↗

AmeriFlux FLUXNET-1F US-Dix Fort Dix

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-Dix Fort Dix. This is the FLUXNET version of the carbon flux data for the site US-Dix Fort Dix produced by applying the standard ONEFlux (1F) software. Site Description - The Fort Dix site is located in the upland forests of the New Jersey Pine Barrens, the largest continuous forested landscape on the Northeastern coastal plain. Upland forests occupy 62% of the 1.1 million acre Pine Barrens and can be divided into three dominant stand types, Oak/Pine (19.1%), Pine/Oak (13.1%), and Pitch Pine/Scrub oak (14.3%). The majority of mature upland forests are the product of regeneration following late 19th century logging and charcoaling activities. Gypsy moths first appeared in the Pine Barrens of New Jersey in 1966. Since the time of arrival, the upland forest stands have undergone several episodes of defoliation, the most significant occurred in 1972, 1981, and 1990. In recent years, the overstory oaks and understory oaks and shrubs of the Fort Dix stand, underwent two periods of defoliation by Gypsy moth, in 2006 and 2007. During these two years, maximum leaf area reached only 70% of the 2005 summer maximum.

Clark, Kenneth↗

AmeriFlux FLUXNET-1F CA-SF3 Saskatchewan - Western Boreal, forest burned in 1998

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site CA-SF3 Saskatchewan - Western Boreal, forest burned in 1998. This is the FLUXNET version of the carbon flux data for the site CA-SF3 Saskatchewan - Western Boreal, forest burned in 1998 produced by applying the standard ONEFlux (1F) software. Site Description - The 1998 burn site (F98) was in the east part of Prince Albert National Park, Saskatchewan, in the Waskesiu Fire, ignited by lightning that burned about 1700 ha in July 1998. The pre-fire forest consisted of jack pine and black spruce stands, with some intermixed aspen. The fire was severe, consuming much of the top layer of organic soil and killing all trees. In 2001, much of the regenerating vegetation consisted of aspen saplings about 1 m tall and shorter jack pine and black spruce seedlings. An overstory of dead, leafless jack pine trees dominated at a height of 18 m. Sparse grass and herbs, such as fireweed (Epilobium angustifolium L.) covered the ground. There were a large number of fallen dead trees, mostly perched above the ground and not decomposing quickly.

Amiro, Brian [University of Manitoba; Canadian For↗

AmeriFlux FLUXNET-1F US-NC2 NC_Loblolly Plantation

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-NC2 NC_Loblolly Plantation. This is the FLUXNET version of the carbon flux data for the site US-NC2 NC_Loblolly Plantation produced by applying the standard ONEFlux (1F) software. Site Description - The North Carolina Loblolly Pine site is located in a pine plantation amongst the mixed forests of the North Carolina lower coastal plain. During the late 19th and early 20th centuries the region was logged extensively. After a series of clearcuts, the land was transformed for agricultural practices. In 1967 and 1969, 4000 ha was sold to the Weyerhauser company for agriculture, preservation, and commercial logging of loblolly pines in a series of plantations. The fifth rotation stand surrounding the tower was established in 1992. The only significant natural disturbances during the measurement period was a severe drought that spanned the entire duration of the 2007 growing season. Consequently, the 2007 total amount of precipitation was 486 mm below the 30-year norm. In the same year, the plantation was thinned and fertilized. The stand was thinned in Oct 2009. The eastern half of the site was fertilized in January 2011, and the entire site was fertilized in October 2012.

Noormets, Asko [Texas A&M University]↗

Implications of Aerosol Physicochemical Properties Including Ice Nucleation at ARM Mega Sites for Improved Understanding of Microphysical Atmospheric Cloud Processes (Final Technical Report)

Continuous, long-term measurements of atmospheric ice-nucleating particles (INPs) that influence clouds and precipitation were conducted to investigate the abundance and variability of ground-level INPs across the world. Three field campaigns were organized by the DOE Atmospheric Radiation Measurement (ARM) program, including Examining INP from Southern Great Plains (ExINP-SGP, 2019), Examining INP from Eastern North Atlantic (ExINP-ENA, 2020 – 2021), and Examining INP from North Slope of Alaska (ExINP-NSA, 2021 – 2024). Additional small-scale supporting field experiments were performed in 2019 and 2021 to collect airborne particulate matter at SGP for complementary laboratory characterization of the particles’ physical and chemical properties [Aerosol-Ice Formation Closure Pilot Study (AEROICESTUDY), 2019; ExINP-SGP II, 2021]. In these studies, the PI’s team measured INP concentration with both real-time and laboratory measurements in a wide range of freezing temperatures ($T$ from 0 °C to about –30 °C). This project elucidated spatial variability and seasonality in the abundance of immersion mode active INPs across three ARM sites using a single instrument, a Portable Ice Nucleation Experiment (PINE) chamber version 03 (PINE-03 hereafter). Collocated aerosol and meteorological data were analyzed to assess the correlation between ambient INP abundance, air mass origin region, and meteorological variability. Our findings suggest very high freezing efficiency of INPs at the NSA site across the measured temperatures (ice nucleation active surface site density, $n_s(T)$, $\approx 2 \times 10^{8} - 10^{10}$ m -2 for from –16 to –31 °C), which is a factor of 10 – 1000 times greater efficiency as compared to that found in the previous mid-latitude INP measurements in autumn using the same instrument; surprisingly high INP abundance ($\ge 1 \text{ L}^{-1}$ at –25 °C) for the examined temperatures throughout the year that PINE-03 did not measure at other sites; and high INP concentration in spring, possibly related to arctic haze episodes.

58 GEOSCIENCES↗

An Engineered Laccase from Fomitiporia mediterranea Accelerates Lignocellulose Degradation

Laccases from white-rot fungi catalyze lignin depolymerization, a critical first step to upgrading lignin to valuable biodiesel fuels and chemicals. In this study, a wildtype laccase from the basidiomycete Fomitiporia mediterranea (Fom_lac) and a variant engineered to have a carbohydrate-binding module (Fom_CBM) were studied for their ability to catalyze cleavage of β-O-4′ ether and C–C bonds in phenolic and non-phenolic lignin dimers using a nanostructure-initiator mass spectrometry-based assay. Fom_lac and Fom_CBM catalyze β-O-4′ ether and C–C bond breaking, with higher activity under acidic conditions (pH < 6). The potential of Fom_lac and Fom_CBM to enhance saccharification yields from untreated and ionic liquid pretreated pine was also investigated. Adding Fom_CBM to mixtures of cellulases and hemicellulases improved sugar yields by 140% on untreated pine and 32% on cholinium lysinate pretreated pine when compared to the inclusion of Fom_lac to the same mixtures. Adding either Fom_lac or Fom_CBM to mixtures of cellulases and hemicellulases effectively accelerates enzymatic hydrolysis, demonstrating its potential applications for lignocellulose valorization. We postulate that additional increases in sugar yields for the Fom_CBM enzyme mixtures were due to Fom_CBM being brought more proximal to lignin through binding to either cellulose or lignin itself.

59 BASIC BIOLOGICAL SCIENCES↗

The Effect of Rapid Development on Soil CO2 Efflux in a Cellulosic Biofuel Stand

As awareness of climate change increases, the need for carbon neutral fuel sources is growing. Lignocellulosic biofuel derived from pine trees has been suggested as one potential energy source; however, it requires more research before its efficacy for climate change mitigation can be determined. Due to the large share of forest carbon held in soils and the extensive area of pine plantations in the southeast U.S., a better understanding of plantation soil carbon dynamics is critical for biofuel carbon accounting. This study evaluated the effects of canopy development and productivity on soil CO2 efflux, a proxy for soil respiration (Rs), in an intensively managed loblolly pine (Pinus taeda) stand over a period from May 2015 to December 2019. We found that leaf area index (LAI) and gross ecosystem production (GEP), as well as meteorological variables, had significant effects on Rs, but that both overall Rs and soil carbon pools did not increase over the course of the study. We thus hypothesize that GEP and LAI had intra-annual effects on Rs, and that the lack of change in Rs is the result of an increase in autotrophic respiration (Ra) that offset a decrease in decomposition of the previous stand’s organic matter.

09 BIOMASS FUELS↗

Multi-seasonal measurements of the ground-level atmospheric ice-nucleating particle abundance on the North Slope of Alaska

Atmospheric ice-nucleating particles (INPs) are an important subset of aerosol particles that are responsible for the heterogeneous formation of ice crystals. INPs modulate the arctic cloud phase (liquid vs. ice), resulting in implications for radiative feedbacks. The number of arctic INP studies investigating specific INP episodes or sources increased recently. However, existing studies are based on short-duration field data, and long-term datasets are lacking. Continuous, long-term measurements are key to determining the abundance and variability of ambient arctic INPs and constraining aerosol–cloud interactions, e.g., to verify and/or improve simulations of mixed-phase clouds. Here, we present a new long-duration INP dataset from the Arctic: 2 years of predominantly immersion-mode INP concentrations (n INP ) measured continuously at the National Oceanic and Atmospheric Administration's Barrow Atmospheric Baseline Observatory (BRW) on the North Slope of Alaska. A portable ice nucleation experiment chamber (PINE-03), which simulates adiabatic expansion cooling, was used to directly measure the ground-level INP abundance with an approximately 12 min time resolution from October 2021 to December 2023. We document PINE-03 n INP measurements as well as estimated ice nucleation active surface site density (n s ) over a wide range of heterogeneous freezing temperatures from −16 to −31 °C from which we introduce new season-specific parameterizations suitable for modeling mixed-phase clouds. Collocated aerosol and meteorological data were analyzed to assess the correlation between ambient n INP , air mass origin region, and meteorological variability. Our findings suggest (1) very high freezing efficiency of INPs across the measured temperatures (n s ≈ 2×10 8 –10 10 m −2 for −16 to −31 °C), which is a factor of 10–1000 times greater efficiency as compared to that found in the previous mid-latitude INP measurements in fall using the same instrument; (2) surprisingly high n INP (≥ 1 L −1 at −25 °C) for the examined temperatures throughout the year that were not measured by PINE-03 at other sites; and (3) high n INP in spring, possibly related to arctic haze episodes. Relatively low concentrations of aerosol surface area and contrasting high-INP concentrations at BRW relative to mid-latitude sites are the possible reasons for the observed high freezing efficiency.

54 ENVIRONMENTAL SCIENCES↗

Energetics of surface melt in West Antarctica

We use reanalysis data and satellite remote sensing of cloud properties to examine how meteorological conditions alter the surface energy balance to cause surface melt that is detectable in satellite passive microwave imagery over West Antarctica. This analysis can detect each of the three primary mechanisms for inducing surface melt at a specific location: thermal blanketing involving sensible heat flux and/or longwave heating by optically thick cloud cover, all-wave radiative enhancement by optically thin cloud cover, and föhn winds. We examine case studies over Pine Island and Thwaites glaciers, which are of interest for ice shelf and ice sheet stability, and over Siple Dome, which is more readily accessible for field work. During January 2015 over Siple Dome we identified a melt event whose origin is an all-wave radiative enhancement by optically thin clouds. During December 2011 over Pine Island and Thwaites glaciers, we identified a melt event caused mainly by thermal blanketing from optically thick clouds. Over Siple Dome, those same 2011 synoptic conditions yielded a thermal-blanketing-driven melt event that was initiated by an impulse of sensible heat flux and then prolonged by cloud longwave heating. The December 2011 synoptic conditions also generated föhn winds at a location on the Ross Ice Shelf adjacent to the Transantarctic Mountains, and we analyze this case with additional support from automatic weather station data. In contrast, a late-summer thermal blanketing period over Pine Island and Thwaites glaciers during February 2013 showed surface melt initiated by cloud longwave heating and then prolonged by enhanced sensible heat flux. One limitation thus far with this type of analysis involves uncertainties in the cloud optical properties. Nevertheless, with improvements this type of analysis can enable quantitative prediction of atmospheric stress on the vulnerable Antarctic ice shelves in a steadily warming climate.

54 ENVIRONMENTAL SCIENCES↗

Advanced Analytical Methodologies Enable Feedstock Screening and Correlation to Pyrolysis Yields and Catalytic Upgrading

Pyrolysis of lignocellulosic biomass can serve as a powerful pathway for the generation of renewable fuels and industrial products. However, procurement of some biomass may be costly, especially when there is competition for alternative uses. Forestry and agricultural byproducts may serve as valuable pyrolysis feedstocks due to their high availability and low cost. Although waste products may fill demand for affordable pyrolysis feedstocks, they are often high in ash and extractives which contribute to unfavorable changes in pyrolysis vapor composition, as well as end products. The work presented here investigates the correlations between various pine anatomical fractions to understand their effect on pyrolysis oil composition for forest residues. Analytical pyrolysis coupled to direct analysis by molecular beam mass spectrometry (MBMS) provides real-time monitoring of pyrolysis vapor composition, even for compounds that are not amenable to gas chromatography. Statistical analysis of MBMS data from the fast pyrolysis (FP) of clean pine, cambium, twigs and branches, needles, bark, and a forest residue samples revealed that bark and needles made the greatest differences in the vapor composition of forest residues during pyrolysis and were enriched in resin acids, furfural derivatives, and ions that have been previously observed from catalysis corresponding to ash content. These results were also compared to catalytic fast pyrolysis (CFP) using a platinum on titania catalyst, and correlations between FP and CFP products were observed for the anatomical fractions. The forest residues and corresponding anatomical fractions from a stand of 23-year-old pine will be converted by fast pyrolysis in a bench-scale 2-inch fluidized-bed reactor, and statistical correlations between the bench-scale products and analytical-scale pyrolysis vapors will be shown. This work highlights the power of advanced analytical methodologies in determining the contributions of vapor components to catalytic pyrolysis outcomes for mixed feedstocks and demonstrates the use of analytical methodologies to better screen feedstocks prior to pyrolysis.

analytical↗

Pyrolysis temperature and soil depth interactions determine PyC turnover and induced soil organic carbon priming

Pyrogenic organic carbon (PyC) is a complex, heterogeneous class of thermally altered organic substrates, but its dynamics and how its behavior changes with soil depth remain poorly understood. We conducted a laboratory incubation study to investigate the interactive effects of pyrolysis temperature and soil depth on the turnover of PyC compared to its precursor wood and native SOC (NSOC). We incubated dual-labeled (13C and 15N) jack pine pyrogenic organic matter produced at 300 °C (PyC300), 450 °C (PyC450), and their precursor pine wood in a fine-loamy, mixed-conifer forest soil for 745 days. A mixture of surface (0–10 cm) and subsurface (50–70 cm) forest soils, with and without labeled biomass were incubated in the dark at 55% soil water field capacity and 25 °C. Total 13C from PyC and wood mineralized as 13C-CO2 (as % of C added to soil) declined with an increase in pyrolysis temperature as follows: 54 ± 7.7% for wood, 3.1 ± 0.2% for PyC300, and 0.94 ± 0.08% for PyC450. Furthermore, after 2 years, soil depth interacted with pyrolysis temperature to affect C turnover, with total wood C losses significantly declining from 70.6% in surface soils to 37.5% in subsurface soil, while total losses of PyC300 and PyC450 were unaffected by differences between surface and subsurface soils. Wood induced negative priming (i.e., decreased mineralization rates) in surface soil at days 3 and 60, while PyC300 induced positive priming (i.e., increased mineralization rates) in subsurface soil at day 60. After 2 years, unlabeled NSOC losses increased from 9.2 ± 0.8% of NSOC in unamended treatments to 16.5 ± = 2.6% of NSOC with PyC450 additions. Our results suggest that PyC pyrolyzed at a given temperature can mineralize at similar rates between soil depths, and high amounts of PyC450 in subsurface soils can stimulate NSOC losses. These findings indicate that soil depth imposes critical controls on PyC dynamics belowground.

13C-labeling↗

X-ray computed tomography-based porosity analysis: Algorithms and application for porous woody biomass

The properties of lignocellulosic biomass, such as bulk physical, thermal, and mechanical properties, as well as the mobility of enzymes or catalysts, are largely affected by porosity, pore structures, and pore size distribution. While X-ray computed tomography (CT) has been introduced to effectively produce 3D volumetric images of material microstructure, a quantitative porosity analysis from the 3D images has never been done. This work introduces a first-of-its-kind X-ray CT-based quantitative porosity analysis method and applies the developed toolkit to characterize the internal porosity distribution of loblolly pine. A sample loblolly pine chip was scanned by a nano-resolution X-ray CT system and digitally reconstructed after a sequence of image processing operations. Here, a comprehensive porosity analysis was then performed to quantify the envelope porosity, the spatial distribution of local porosity, and the directional porosity. Solutions to the various challenges in image processing, porosity calculation, and large data handling are provided.

42 ENGINEERING↗

Failure Modes and Effects Analysis of Biorefinery Pathways

This talk provides an overview of failure modes and effects analysis (FMEA) development and implementation as a systematic criticality and risk assessment tool for biorefinery pathways within the FCIC. This supports a quality by design (QbD) approach, and this talk provides a high-level overview of the results for the FMEA evaluation focused on the generation of pine residue materials for high-temperature pyrolysis conversion. the FMEA interviews included two approaches. The first approach was based around the entire system of unit operations giving a wholistic system level view. The second approach used detailed interviews from individual unit operation within the system allowing for specific failures for individual system components. These two approaches provide different resolutions of information about the reliability and risk. The FMEA results focused on failures associated with meeting critical quality attributes (CQAs) identified for the high temperature conversion of loblolly pine residues and were supplemented with experimental data supporting process upsets and reliability also collected within the consortium. Estimations of risk scores for meeting each given CQA specification, identification of the impacts for not meeting a CQA specification, capturing causes associated with material attributes and process parameters for each failure, identification of current detection methods, and speculation of potential mitigation strategies for decreasing a failure’s risk score were gathered through the FMEA interviews, and were combined to understand the overall process risk metrics and where technology, process, and knowledge improvements are needed in order to de-risk emerging biorefineries.

09 BIOMASS FUELS↗