Search NASA⌕ Search

SEARCH · Search NASA

Results for “Point-to-Point”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Joint Spectrum Access and Power Control in Air-Air Communications - A Deep Reinforcement Learning Based Approach

This paper considers the dynamic spectrum access and power control problem in a single-hop point-to-point Air-Air Communication Network (AACN). Due to spectrum scarcity, we assume the number of Aircraft-to-Aircraft (A2A) communication links is greater than that of the available channels, such that some communication links need to share the same channel, causing co-channel interference. We formulate the joint channel selection and power control optimization problem to maximize the Weighted Sum Spectral Efficiency (WSSE). A distributed and dynamic deep Q learning-based algorithm is proposed to find the optimal solution. Specifically, we design two different policies that are trained by conducting a trial-and-error scheme. Each communication link can achieve the optimal policy by exploiting the local information from its neighbors, and this distributive approach make it scalable to large networks. Finally, our experimental results demonstrate the effectiveness of the proposed solution in various AACN scenarios.

Zhe Wang↗

Cross-Validation of Computational and Experimental Distributed Surface Pressures on the Space Launch System

This paper presents a new workflow for comparing experimental pressure-sensitive paint (PSP) data to computational fluid dynamic (CFD) simulations by way of mapping data from corresponding grids utilizing interpolation methods. In addition to generating quantitative and qualitative point-to-point comparisons between PSP and CFD data, this workflow extracts sectional loading data from both grids and generates lineload comparison charts for corresponding PSP and CFD runs. Experimental PSP data presented in this paper were taken from a 2016 NASA Ames Research Center Unitary Plan Wind Tunnel 11- by 11-Foot Transonic WindTunnel Facility test of the NASA Space Launch System. CFD simulation data for comparison purposes were generated using the FUN3D code. Overall, interpolation onto PSP grids versus CFD grids yields comparable surface pressure fields. However, lineload comparisons are easier to make on the CFD grid-mapped data due to the grid topology and the current capabilities of the lineload analysis tools at NASA Langley Research Center. This workflow is written using contemporary software (Python, Tecplot, PyTecplot), is compatible with existing tools at NASA Langley, and is developed to be adaptable depending on the situation.

SLS↗

High Speed Point-to-Point Market Analysis Quick Review

A brief and final update is presented that summarizes recent high-speed studies conducted under different sponsorships leading up to 2021. Specifically, work sponsored by the Portfolio Analysis and Management Office is reflected against contracted efforts sponsored by the Hypersonic Technology Project.

Aeronautics↗

“Cold-Flow” Experiments Supporting CFD of Mixing Flowfields for High-Speed Fuel Injectors for Scramjet Applications

Recent flight demonstrations of supersonic combustion ramjet (scramjet) vehicles prove their increasing promise for military (rapid response and strike capability on global scale), aerospace (safer and more affordable access to space), and civil aviation (hypersonic point-to-point transport) applications. Currently, these technologies are still in their early development stages with commercial interest and investment at only a fraction of that of government organizations such as NASA and DoD. To advance hypersonic air-breathing propulsion technologies to the technology readiness levels necessary for access to space or widespread commercialization, further government investments and university engagement are needed over the next decade and likely beyond. This is because designing scramjet propulsion devices capable of robust high-speed air-breathing operation, characterized by rapid fuel and air mixing, short combustion times, and ensuring stable flame, has proven difficult. In this presentation, after a brief engineering-level introduction to scramjets technology, we will discuss one of the key challenges in high-speed propulsion design, namely the fuel injector design. Attempts at improving fuel injection to enhance fuel-air mixing while simultaneously reducing engine thrust losses have received a great deal of attention over the years. Although some amount of loss is thermodynamically unavoidable and occurs due to the desired effect of molecular mixing of fuel and air, any losses beyond this minimum required amount reduces the thrust potential of the engine. The Enhanced Injection and Mixing Project (EIMP) at NASA Langley Research Center aims at addressing this design challenge by analyzing the performance of a number of baseline and novel fuel injectors for high-speed applications. The project leverages computational and experimental capabilities with the goal to investigate scramjet fuel injection and mixing physics, improve our understanding of the underlying physical process, and develop enhancement strategies relevant to hypersonic flight Mach numbers. The talk will discuss the current computational and experimental research approaches using one of the baseline injectors considered by the EIMP as an example.

Scramjet↗

Challenges in Securing UAM Operations

Urban air mobility (UAM) is a concept that proposes to develop short-range, point-to-point transportation systems in metropolitan areas using vertical takeoff and landing (VTOL) or short takeoff and landing (STOL) aircraft to overcome increasing surface congestion. To realize the potential of UAM, an assurance of cybersecurity is critical for public acceptance. Cybersecurity has come to the forefront highlighting the need to protect these networks and systems from cyberattacks. The growth in the development of UAM systems, and the associated data exchange and service interactions will create abundant challenges due to numerous types of cybersecurity attacks. As these threats evolve, the UAM cybersecurity capabilities must adapt to these changes as well.

Urban Air Mobility,↗

Challenges in Securing the Future of Air Travel

Urban air mobility (UAM) is a concept that proposes to develop short-range, point-to-point transportation systems in metropolitan areas using vertical takeoff and landing (VTOL) or short takeoff and landing (STOL) aircraft to overcome increasing surface congestion. To realize the potential of UAM, an assurance of cybersecurity is critical for public acceptance. Cybersecurity has come to the forefront highlighting the need to protect these networks and systems from cyberattacks. The growth in the development of UAM systems, and the associated data exchange and service interactions will create abundant challenges due to numerous types of cybersecurity attacks. As these threats evolve, the UAM cybersecurity capabilities must adapt to these changes as well.

UAM↗

A Blockchain Case Study for Urban Air Mobility Operational Intent

The next generation of aerial passenger and cargo transportation may leverage the concept of Urban Air Mobility (UAM). UAM is a concept that proposes to develop short-range, point-to-point transportation systems in metropolitan areas using vertical takeoff and landing (VTOL) or short takeoff and landing (STOL) aircraft to overcome increasing surface congestion [1]. The UAM concept leverages a decentralized service-based architecture for airspace solutions. Within the environment, UAM operators work collaboratively to manage aerial vehicles in the urban environment. Providers of Services for UAM (PSU), UAM operators, and Supplemental Data Service Providers (SDSP) provide services to support flight operations within the UAM environment. Also, various views of UAM flight information are provided to the public and public safety entities [2]. The Federal Aviation Administration (FAA) can coordinate flight information between the FAA controlled National Airspace System (NAS) and the UAM environments through the FAA-Industry Data Exchange Protocol (FIDXP). To realize the potential of UAM, an assurance of cybersecurity is critical for public acceptance. Cybersecurity has come to the forefront highlighting the need to protect these networks and systems from cyberattacks. The growth in the development of UAM systems, and the associated data exchange and service interactions will be at risk due to numerous types of cybersecurity attacks. As these threats evolve, the UAM cybersecurity capabilities must adapt to these changes as well [3]. This research focuses on the secure data exchange and storage of this decentralized UAM environment to address these challenges. This research intends to leverage a permissioned blockchain approach to address cybersecurity threats that may impact a UAM environment. Blockchain technologies can be used for tracking transactions and verifying negotiated agreements between stakeholders in the NAS environment. For example, the record of the submitted flight plan and the approved flight plan could be verified using the Blockchain-based immutable ledger.

UAM↗

High-Rate Delay Tolerant Networking (HDTN) User Guide Version 1.0

Delay Tolerant Networking (DTN) has been identified as a key technology to enable and facilitate the development and growth of future space networks. Classically, space communications networks are collections of disparate links that are manually managed either point-to-point or use space relays. The accelerating accessibility of space enables a new scaling of space nodes, yet both the manual management of configurations and scheduling and the lack of structure connecting links precisely prohibit scaling. This challenge gives rise to newer and larger classes of communications needs that are met by DTN, which must overcome the disconnection, disruption, latency, and mobility featured in space communications systems. DTN joins the underlying links as an overlay, and can be made to communicate over any protocol stack. The core actions of DTN are store, carry, and forward, where data are stored instead of dropped if there is no immediately available outduct. It does this by taking the DTN unit of data, bundles, and providing necessary layers to adapt these bundles to the underlying transport protocols of choice; these are called convergence layers. DTN's Bundle Protocol (BP) can then be used on top of terrestrial protocol stacks, such as TCP/IP, as well as protocols for space, such as LTP/AOS, all in the same network. For emphasis it is noted that bundles can be of essentially any size, and hence this convergence to lower layers of choice is necessary. Existing DTN implementations have operated in constrained environments with limited resources, resulting in low data speeds. However, as various technologies have advanced, data transfer rates and efficiency have advanced, which has pushed the need for a DTN implementation for ground systems and for spacecraft that is performance-oriented in order to not impose an unnecessary bottleneck. High-rate Delay Tolerant Networking (HDTN) takes advantage of modern hardware platforms to substantially reduce latency and improve throughput compared to today’s DTN operations. The HDTN implementation maintains interoperability with existing deployments of DTN that conform to IETF RFCs 4838, 5050, and 9171. At the same time, HDTN defines a new data format better suited to higher-rate operation. It defines and adopts a massively parallel pipelined and message-oriented architecture, allowing the system to scale gracefully as its resources increase. HDTN’s architecture also supports hooks to replace various processing pipeline elements with specialized hardware accelerators. This offers improved Size, Weight, and Power (SWaP) characteristics while reducing development complexity and cost.

Delay Tolerant Networking↗

NASA’s Secured Airspace for Urban Air Mobility (UAM)

The Urban Air Mobility (UAM) architecture is leveraged from the Unmanned Traffic Management (UTM) concept of operations. Within the UAM environment, UAM operators work collaboratively to manage aerial vehicles in the urban environment. Providers of Services for UAM (PSU), UAM operators, and Supplemental Data Service Providers (SDSP) provide services to support flight operations within that environment. As a recognized need, various views of UAM flight information are provided to the public and public safety entities. To accomplish this, among other goals, the Federal Aviation Administration (FAA) can coordinate flight information between the FAA controlled National Airspace System (NAS) and the UAM environments through the FAA-Industry Data Exchange Protocol (FIDXP). This concept of UAM proposes to develop short-range, point-to-point transportation systems in metropolitan areas using vertical take-off and landing (VTOL) or short take-off and landing (STOL) aircraft to overcome increasing surface congestion. To garner the support of UAM and to realize its potential, an assurance of cybersecurity is critical for public acceptance. Understanding the various components communicating with one-another cybersecurity, like in other industries, has come to the forefront highlighting the need to protect these networks and systems from cyberattacks. With the planned growth and reach of UAM systems, it’s clear that the associated data exchange and service interactions will be at risk due to numerous types of cybersecurity attacks. Consequently, as these threats evolve, the UAM cybersecurity capabilities must adapt to these changes as well. While learning is always the goal, the overall intent of this workshop is to make recommendations on the following: (1) how future UAM environments can be protected against cyber-attacks, and (2) what mechanisms should be put in place to detect attacks against UAM environments.

UAM↗

Advances in Modeling Solar System Internet Structures and their Data Flows

With an ever-increasing presence in space, there is also an increasing burden on existing communications infrastructure. We are heading towards an inflection point where the traditional approach of scheduled, single-path communications for space will no longer be viable. One answer is Delay Tolerant Networking (DTN), which takes the once disparate system of point-to-point links and unifies them in a networked architecture, thereby making communications more scalable. However, much work remains for discovering and harnessing the underlying theory of DTN. For example, in the terrestrial setting the interplay between routing domains is well-understood, however this is not the case in DTNs. In this paper, we build up the fundamental foundations of DTN, with an emphasis on modeling time varying networks and data flows across them, with examples of cross-domain routing in a DTN. A lofty goal of DTN is to enable the so-called Solar System Internet (SSI), which implies a standardized and robust suite of protocols. These protocols include routing across disconnected networks using store, carry, and forward mechanisms, which is necessary due to the disconnections, delays, and mobility intrinsic to space networks. Due to these factors, each of which generalize traditional networking, there is a deep and rich theory of DTNs. Here we build off of past successes to broaden this theory while striving to keep actionable results a goal for future implementations and operations. The approach includes modeling the unicast, broadcast, and multicast communications using the language of hypergraphs, which capture the geometric properties of such networked communications algebraically. Also inherent to these networks is their time-varying nature, particularly given mobility, and hence we also cultivate modeling techniques that respect this time dependence. This leads us to develop models using tools from category theory and algebraic geometry, which provide a language well-suited to describing synchronization and optimization over such networks. We also introduce and study a novel generalization of curvature applicable to time-evolving networks, which provides quantitative controls on diffusion processes on the network. Because an interplanetary network would feature links with propagation delays the preclude discovery (feedback) mechanisms, they will always feature a scheduled component. However, it is beneficial to support discovery where possible. While DTNs do not yet have strong definitions for their analogues of autonomous systems or network areas, we show how to join dynamic and schedule-based routing domains, using the language of sheaves, which marks progress towards such definitions. We conclude with a discussion of the progress made, as well as suggestions for future work.

Delay Tolerant Networking↗

A Blockchain Case Study for Urban Air Mobility Operational Intent

To realize the potential of Urban Air Mobility (UAM), an assurance of cybersecurity is critical for public acceptance. UAM is a concept that proposes to develop short-range, point-to-point transportation systems in metropolitan areas using vertical takeoff and landing (VTOL) aircraft to overcome increasing surface congestion. The growth in the development of UAM systems, and the associated data exchange and service interactions will be at risk due to numerous types of cybersecurity attacks. The intent of this work is to leverage a permissioned blockchain to simulate secure data exchange and storage for the UAM operational intent use case. In this case study, two vehicle operators are operating in the same airspace. Their intent is to fly vehicles that land at a shared vertiport, securely.

Urban Air Mobility↗

A Blockchain Case Study for Urban Air Mobility Operational Intent

To realize the potential of Urban Air Mobility (UAM), an assurance of cybersecurity is critical for public acceptance. UAM is a concept that proposes to develop short-range, point-to-point transportation systems in metropolitan areas using vertical takeoff and landing (VTOL) aircraft to overcome increasing surface congestion. The growth in the development of UAM systems, and the associated data exchange and service interactions will be at risk due to numerous types of cybersecurity attacks. The intent of this work is to leverage a permissioned blockchain to simulate secure data exchange and storage for the UAM operational intent use case.

UAM↗

A Blockchain Case Study for Urban Air Mobility Operational Intent

To realize the potential of Urban Air Mobility (UAM), an assurance of cybersecurity is critical for public acceptance. UAM is a concept that proposes to develop short-range, point-to-point transportation systems in metropolitan areas using vertical takeoff and landing (VTOL) aircraft to overcome increasing surface congestion. The growth in the development of UAM systems, and the associated data exchange and service interactions will be at risk due to numerous types of cybersecurity attacks. The intent of this work is to leverage a permissioned blockchain to simulate secure data exchange and storage for the UAM operational intent use case.

UAM↗

Application of Fountain Code to High-Rate Delay Tolerant Networks

Space communication poses several unique challenges that are not always present in typical terrestrial communications. Currently, communication with satellites is based on point-to-point links, and development of an interplanetary internet is an active research area. Delay Tolerant Networking (DTN) has been proposed as a way to mitigate the long delays and disruptions found in deep space. A specialized version of DTN, called High-rate Delay Tolerant Networking (HDTN), has been developed by NASA to support a variety of missions requiring store-and-forward capability. However, there are still several features that are desired for HDTN including data fragmentation, multicast, and anycast. This project proposes the application of fountain code in HDTN as a means of fragmenting, distributing, and reassembling data (in the form of bundles) across multiple nodes (i.e. satellites) to any number of receivers (i.e. ground stations). Fountain code is shown to be a promising encoding method for use with the HDTN protocol suite due to its short runtimes, small encoded file sizes, and loss tolerance.

Noah Douglass↗

Laser Communications Relay Demonstration: Experiments With Delay Tolerant Networking

The Laser Communications Relay Demonstration (LCRD) is a NASA mission that is presently providing a link between two optical ground stations on Earth and geosynchronous orbit; this capability will be extended to include a laser terminal on the International Space Station (ISS). From a practical perspective, LCRD provides a 1Gbps Ethernet link with an anticipated round-trip time of 4 seconds. Delay Tolerant Networking (DTN) is being used to transcend LCRDs capabilities from a point-to-point link to true network connectivity. Indeed, integrating the LCRD link into any network, such as one aboard the ISS, adds new hops and paths. In this paper, we detail DTN experiments conducted using LCRD to demonstrate how DTN and optical capabilities complement each other to enable the next generation of space communication modalities. We conclude with considerations on using LCRD to connect the ISS to the optical ground stations.

Alan Hylton↗

High-Rate Delay Tolerant Networking (HDTN) User Guide Version 1.3.0

Delay Tolerant Networking (DTN) has been identified as a key technology to enable and facilitate the development and growth of future space networks. Classically, space communications networks are collections of disparate links that are manually managed either point-to-point or use space relays. The accelerating accessibility of space enables a new scaling of space nodes, yet both the manual management of configurations and scheduling and the lack of structure connecting links precisely prohibit scaling. This challenge gives rise to newer and larger classes of communications needs that are met by DTN, which must overcome the disconnection, disruption, latency, and mobility featured in space communications systems. DTN joins the underlying links as an overlay, and can be made to communicate over any protocol stack. The core actions of DTN are store, carry, and forward, where data are stored instead of dropped if there is no immediately available outduct. It does this by taking the DTN unit of data, bundles, and providing necessary layers to adapt these bundles to the underlying transport protocols of choice; these are called convergence layers. DTN's Bundle Protocol (BP) can then be used on top of terrestrial protocol stacks, such as TCP/IP, as well as protocols for space, such as LTP/AOS, all in the same network. For emphasis it is noted that bundles can be of essentially any size, and hence this convergence to lower layers of choice is necessary. Existing DTN implementations have operated in constrained environments with limited resources, resulting in low data speeds. However, as various technologies have advanced, data transfer rates and efficiency have advanced, which has pushed the need for a DTN implementation for ground systems and for spacecraft that is performance-oriented in order to not impose an unnecessary bottleneck. High-rate Delay Tolerant Networking (HDTN) takes advantage of modern hardware platforms to substantially reduce latency and improve throughput compared to today’s DTN operations. The HDTN implementation maintains interoperability with existing deployments of DTN that conform to IETF RFCs 4838, 5050, and 9171. At the same time, HDTN defines a new data format better suited to higher-rate operation. It defines and adopts a massively parallel pipelined and message-oriented architecture, allowing the system to scale gracefully as its resources increase. HDTN’s architecture also supports hooks to replace various processing pipeline elements with specialized hardware accelerators. This offers improved Size, Weight, and Power (SWaP) characteristics while reducing development complexity and cost.

Delay Tolerant Networking↗

Annoyance Model Assessments of Urban Air Mobility Vehicle Operations

As urban air mobility (UAM) vehicles begin to enter service, consideration must be given to vertiport siting and flight routing to help reduce community noise impact and promote adoption by the community. Notwithstanding environmental justice concerns, a possible early strategy is to operate out of existing heliports and fly along established helicopter routes, many of which follow uninhabited waterways and/or roadways (with the thought for the latter that an already noisy ambient environment will mask the sound of the aircraft). However, no prior annoyance model has been fielded that both takes audibility into account and that may be applied to such a real-world strategy. This paper reviews a recently developed annoyance model that includes audibility as a factor and applies it to two flight operations. A simple overflight case is first undertaken to demonstrate the approach. A point-to-point operation in the New York City area is then considered to demonstrate how annoyance varies across an urban soundscape. The cases considered use modeled UAM vehicle noise propagated to a set of ground observers as the signals and either recorded or modeled ambient acoustic data as the maskers.

aircraft community noise↗