Search NASA⌕ Search

SEARCH · Search NASA

Results for “Polarization transformations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Specific Features of the Domain Structure of BaTiO{sub 3} Crystals during Thermal Heating and Cooling

This paper presents the results of the study of the domain structure of barium titanate crystals in a wide temperature range including the Curie point (T{sub C}) using the polarization-optical method in the reflected light and the force microscopy of the piezoelectric response. It is shown that a new a–c domain structure forms during cyclic heating of the crystal above T{sub C} and subsequent cooling to the ferroelectric phase. The role of uncompensated charges appeared on the crystal surface during the phase transition and their influence on the formation of the domain structure during cooling are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Polarized IR and Raman spectra of Ca{sub 2}MgSi{sub 2}O{sub 7}, Ca{sub 2}ZnSi{sub 2}O{sub 7} and Sr{sub 2}MgSi{sub 2}O{sub 7} single crystals: Temperature-dependent studies of commensurate to incommensurate and incommensurate to normal phase transitions

IR and Raman spectra of Ca{sub 2}MgSi{sub 2}O{sub 7}, Ca{sub 2}ZnSi{sub 2}O{sub 7} and Sr{sub 2}MgSi{sub 2}O{sub 7} oriented single crystals and powders have been measured. The temperature dependence of phonons has been established in the 4-650 K range. Discussion of the results has been performed on the basis of factor group approach for the tetragonal P4-bar 2{sub 1}m (D{sub 2d}{sup 3}) space group with Z=2. The assignment of the bands observed to the internal and external modes has been made on their polarization behaviour, phonon energy calculations and literature data. The evidences of the LO-TO splitting and commensurate (C) to incommensurate (IC) as well as incommensurate (IC) to normal (N) phase transitions have been found. As a representative example, the results obtained for the spontaneous Raman scattering have also been used in the discussion of the stimulated Raman spectra of Ca{sub 2}ZnSi{sub 2}O{sub 7}. - Graphical abstract: Raman and IR spectra of Ca{sub 2}MgSi{sub 2}O{sub 7}, Ca{sub 2}ZnSi{sub 2}O{sub 7}, Sr{sub 2}MgSi{sub 2}O{sub 7} have been measured. The temperature dependence of phonons has been established in the 4-650 K range. The evidences of the LO-TO splitting and commensurate (C) to incommensurate (IC) as well as incommensurate (IC) to normal (N) phase transitions have been found. Highlights: Black-Right-Pointing-Pointer Polarized IR and Raman spectra of pyrosilicates single crystals have been studied. Black-Right-Pointing-Pointer Temperature dependence of the phonon bands and LO-TO splitting have been analysed. Black-Right-Pointing-Pointer Commensurate to incommensurate and to normal phase have been evidenced in the spectra. Black-Right-Pointing-Pointer Phonon calculations have been used in assignment of the normal modes. Black-Right-Pointing-Pointer Stimulated Raman spectra of Ca{sub 2}ZnSi{sub 2}O{sub 7} crystal have been measured and analysed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation on transition behavior and electrical properties of (K{sub 0.5}Na{sub 0.5}){sub 1-x}Li{sub x}Nb{sub 0.84}Ta{sub 0.1}Sb{sub 0.06}O{sub 3} around polymorphic phase transition region

(K{sub 0.5}Na{sub 0.5}){sub 1-x}Li{sub x}Nb{sub 0.84}Ta{sub 0.1}Sb{sub 0.06}O{sub 3} (KNLNTS) lead free ceramics with different Li concentration were fabricated by conventional solid-state reaction method. By increasing Li ions in KNLNTS, the grains grow up and the crystal structure changes from orthorhombic to tetragonal. When 0.03 ≤ x ≤ 0.05, the ceramics structure lays in PPT region. Polarization versus electric field (P-E) hysteresis loops at room temperature show good ferroelectric properties and the remnant polarization decreases by increasing Li content while coercive electric keeps almost unchanged. In PPT region, taking x = 0.04 as an example, the sample shows excellent dielectric properties: the dielectric constant is 1159 and loss tangent is 0.04, while the piezoelectric constant d{sub 33} is 245 pC/N and kp is 0.44 at room temperature, it is promising for (K{sub 0.5}Na{sub 0.5}){sub 1-x}Li{sub x}Nb{sub 0.84}Ta{sub 0.1}Sb{sub 0.06}O{sub 3} with 4 at. % Li to substitute PZT.

36 MATERIALS SCIENCE↗

Preparation and characterization of Pb(Lu1/2Nb1/2)O3-Pb(Ni1/3Nb2/3)O3-PbTiO3 ternary ferroelectric ceramics with high piezoelectric constant

Highlights: • PLN-PNN-PT ternary ferroelectric systems were prepared by two-step method. • PLN-PNN-PT ceramics exhibit typical relaxor behavior. • 0.17PLN-0.47PNN-0.36PT ceramic has optimal properties (T{sub C} ∼ 142 °C, d{sub 33} ∼ 378 pC/N). - Abstract: Pb(Lu{sub 1/2}Nb{sub 1/2})O{sub 3}-Pb(Ni{sub 1/3}Nb{sub 2/3})O{sub 3}-PbTiO{sub 3} ferroelectric ceramics were successfully prepared by a modified two-step columbite precursor method. The structural, dielectric, ferroelectric and piezoelectric properties were characterized by X-ray diffraction, ferroelectric and dielectric measurements. All the obtained samples have pure perovskite structure. The composition of 0.17PLN-0.47PNN-0.36PT within morphotropic phase boundary exhibits optimal properties with piezoelectric coefficient d{sub 33} = 378 pC/N, Curie temperature Tc = 142 °C, dielectric constant ε΄ = 4700, dielectric loss tangent tanδ = 0.05, remnant polarization Pr = 27.1 μC/cm{sup 2} and coercive field Ec = 8.89 KV/cm. According to Curie-Weiss Law and Lorentz-type quadratic relationship, the dielectric behavior was studied and the relaxor factor γ is between 1.55–1.87, indicating the character of diffuse phase transition of the Pb(Lu{sub 1/2}Nb{sub 1/2})O{sub 3}-Pb(Ni{sub 1/3}Nb{sub 2/3})O{sub 3}-PbTiO{sub 3} ceramics. The excellent piezoelectric properties and high Curie temperature make this system a promising material for high-power transducer applications in a broad temperature range.

36 MATERIALS SCIENCE↗

Characterizing and Modeling the Noise and Complex Impedance of Feedhorn-Coupled TES Polarimeters

We present results from modeling the electrothermal performance of feedhorn-coupled transition edge sensor (TES) polarimeters under development for use in cosmic microwave background (CMB) polarization experiments. Each polarimeter couples radiation from a corrugated feedhorn through a planar orthomode transducer, which transmits power from orthogonal polarization modes to two TES bolometers. We model our TES with two- and three-block thermal architectures. We fit the complex impedance data at multiple points in the TES transition. From the fits, we predict the noise spectra. We present comparisons of these predictions to the data for two TESes on a prototype polarimeter.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Study of the structure, dielectric and ferroelectric behavior of BaBi{sub 4+δ}Ti{sub 4}O{sub 15} ceramics

The structure and ferroelectric properties of excess bismuth doped barium bismuth titanate BaBi{sub 4+δ}Ti{sub 4}O{sub 15} (δ = 2 - 10 wt.%)) ceramics prepared by solid-state reaction method have been investigated. X-ray diffraction (XRD) confirms the formation of a single phase material with a change in the orthorhombic distortion with varying excess of bismuth content. There is no change in the phase transition temperature (T{sub m}) while the relaxor behaviour has been modified significantly with excess of bismuth doping. Saturated hysteresis loops with high remnant polarization (P{sub r} ~ 12.5 µC/cm{sup 2}), low coercive fields (E{sub c} ~ 26 kV/cm) are measured and a high piezoelectric coefficient (d{sub 33} ~ 29 pC/N) is achieved in poled BaBi{sub 4}Ti{sub 4}O{sub 15} ceramics prepared with up to 8 wt.% of excess bismuth oxide. The improvement in the ferroelectric properties with increase in the excess bismuth content in BaBi{sub 4}Ti{sub 4}O{sub 15} ceramics has been explained in terms of changing oxygen vacancy concentration and structural relaxation. Tunable ferroelectric materials can be obtained by manipulating the doping amount of excess bismuth.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Time-resolved Polarimetry of the Superluminous SN 2015bn with the Nordic Optical Telescope

We present imaging polarimetry of the superluminous supernova SN 2015bn, obtained over nine epochs between −20 and +46 days with the Nordic Optical Telescope. This was a nearby, slowly evolving Type I superluminous supernova that has been studied extensively and for which two epochs of spectropolarimetry are also available. Based on field stars, we determine the interstellar polarization in the Galaxy to be negligible. The polarization of SN 2015bn shows a statistically significant increase during the last epochs, confirming previous findings. Our well-sampled imaging polarimetry series allows us to determine that this increase (from ∼0.54% to ≳1.10%) coincides in time with rapid changes that took place in the optical spectrum. We conclude that the supernova underwent a “phase transition” at around +20 days, when the photospheric emission shifted from an outer layer, dominated by natal C and O, to a more aspherical inner core, dominated by freshly nucleosynthesized material. This two-layered model might account for the characteristic appearance and properties of Type I superluminous supernovae.

79 ASTRONOMY AND ASTROPHYSICS↗

Crystalline and spin chiralities in multiferroics with langasite-type structure and Fe{sub 1–x}Co{sub x}Si crystals

It is shown that, when magnetic ordering occurs in layered iron-containing langasites (sp. gr. P321), one of the reasons for spin chiralities of different signs is the presence of structural chirality (the existence of inversion twins), which, in turn, is due to the nonsymmetricity of these crystals. Spin helicoids arise in these multiferroics at split sites of Fe{sup 3+} ions below the Néel point. The direction of electric polarization vectors coincides with the direction of the magnetic helicoid axes because of the piezoelectric properties of these materials. Due to the magnetostriction effects, structural chirality wave vector k{sub z} exceeds the magnetic helicoid wave vector by a factor of 2: k{sub z} = 2q{sub z}. The temperatures of transitions to the chiral structural and chiral magnetic states may differ. In particular, if the structural transition initial temperature exceeds the magnetic transition temperature (Τ{sub U}> Τ{sub M}), structural displacements may arise in the absence of magnetism at Τ{sub M} < Τ < Τ{sub U}. In noncentrosymmetric Fe{sub 1–x}Co{sub x}Si crystals (sp. gr. P2{sub 1}3), which are not multiferroics, magnetic chirality is due to the Dzyaloshinski–Moriya interaction. The dependence of the moduli of incommensurate wave number of the corresponding helicoid on the atomic composition of the crystals under consideration is nonmonotonic.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Depolarization mechanisms of PbZr{sub 0.52}Ti{sub 0.48}O{sub 3} and PbZr{sub 0.95}Ti{sub 0.05}O{sub 3} poled ferroelectrics under high strain rate loading

Stress-induced and thermal-induced depolarization studies along with X-ray diffraction were performed on lead zirconate titanate ferroelectrics of different compositions, PbZr{sub 0.52}Ti{sub 0.48}O{sub 3} (PZT 52/48) and PbZr{sub 0.95}Ti{sub 0.05}O{sub 3} (PZT 95/5). Specimens were shock loaded perpendicular to the polarization vector. It was found that the polarity of the stress-induced charge released by PZT 52/48 and 95/5 was opposite to the polarity of the charge generated due to the piezoelectric effect. PZT 52/48 was only partially (45%) depolarized under 1.5 ± 0.1 GPa mechanical compression, as opposed to PZT 95/5 which was fully depolarized. The experimental results indicate that the stress-induced depolarization mechanisms are different for these two compositions. PZT 52/48 is transformed to a state with lower polarization, while PZT 95/5 undergoes a phase transition to a non-polar antiferroelectric phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bloch oscillations of exciton-polaritons and photons for the generation of an alternating terahertz spin signal

We analyze theoretically the spin dynamics of exciton-polaritons and photons during their Bloch oscillations in a wire-shaped microcavity. The reduced system dimensionality induces a specific momentum-dependent energy splitting between the TE- and TM-polarized eigenmodes. As a consequence, the spin of the particles oscillates during their motion along the wire. We show that the periods of the Bloch oscillations and of the spin precession can become commensurate. Under such conditions, linearly polarized exciting pulses can be transformed in a THz alternating spin current. The structure acts as a spin-optronic device which converts the polarization and emits spin-polarized pulses. Finally, we propose two different schemes which allow us to maintain the intensity of the spin signal for much longer than the polariton lifetime.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Piezoelectric analysis of reactively grown PbTiO{sub 3}

We have investigated a technique that is a combination of sputtering, evaporation, and annealing for the production of thin film and nanostructured PbTiO{sub 3} that we show to be piezoelectric via piezoresponse force microscopy (PFM). The synthesis technique involved depositing lead, via thermal evaporation, onto the surface of a variety of substrates that had Ti as the uppermost layer, followed by conventional or rapid thermal annealing in air to form PbTiO{sub 3}. By careful control of the deposition time, samples ranging from discrete nanoislands to thin films could be produced. The nanoisland samples while exhibiting a piezoelectric response displayed little or no domain structure even with grains as large as 100 nm in diameter. However, we see a domain pattern in the thin film samples. We show that there are difficulties in poling PbTiO{sub 3} thin films using PFM due to the high coercive field required and the number of shorts through the thin films.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Behavior of a hollow core photonic crystal fiber under high radial pressure for downhole application

Pressure fiber sensors play an important role in downhole high pressure measurements to withstand long term operation. The purpose of this paper is to present an application of hollow core photonic crystal fiber (HC-PCF) as a high pressure sensor head for downhole application based on dispersion variation. We used a high pressure stainless steel unit to exert pressure on the sensor. The experimental results show that different wavelengths based on sagnac loop interferometer have additive sensitivities from 5 × 10{sup −5} nm/psi at 1480 nm to 1.3 × 10{sup −3} nm/psi at 1680 nm. We developed a simulation to understand the reason for difference in sensitivity of wavelengths and also the relationship between deformation of HC-PCF and dispersion variation under pressure. For this purpose, by using the finite element method, we investigated the effect of structural variation of HC-PCF on spectral transformation of two linear polarizations under 1000 psi pressure. The simulation and experimental results show exponential decay behavior of dispersion variation from −3.4 × 10{sup −6} 1/psi to −1.3 × 10{sup −6} 1/psi and from −5 × 10{sup −6} 1/psi to −1.8 × 10{sup −6} 1/psi, respectively, which were in a good accordance with each other.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pressure, temperature, and electric field dependence of phase transformations in niobium modified 95/5 lead zirconate titanate

Ceramic niobium modified 95/5 lead zirconate-lead titanate (PZT) undergoes a pressure induced ferroelectric to antiferroelectric phase transformation accompanied by an elimination of polarization and a volume reduction. Electric field and temperature drive the reverse transformation from the antiferroelectric to ferroelectric phase. The phase transformation was monitored under pressure, temperature, and electric field loading. Pressures and temperatures were varied in discrete steps from 0 MPa to 500 MPa and 25 °C to 125 °C, respectively. Cyclic bipolar electric fields were applied with peak amplitudes of up to 6 MV m{sup −1} at each pressure and temperature combination. The resulting electric displacement–electric field hysteresis loops were open “D” shaped at low pressure, characteristic of soft ferroelectric PZT. Just below the phase transformation pressure, the hysteresis loops took on an “S” shape, which split into a double hysteresis loop just above the phase transformation pressure. Far above the phase transformation pressure, when the applied electric field is insufficient to drive an antiferroelectric to ferroelectric phase transformation, the hysteresis loops collapse to linear dielectric behavior. Phase stability maps were generated from the experimental data at each of the temperature steps and used to form a three dimensional pressure–temperature–electric field phase diagram.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Novel angular velocity estimation technique for plasma filaments

Magnetic field aligned filaments such as blobs and edge localized mode filaments carry significant amounts of heat and particles to the plasma facing components and they decrease their lifetime. The dynamics of these filaments determine at least a part of the heat and particle loads. These dynamics can be characterized by their translation and rotation. In this paper, we present an analysis method novel for fusion plasmas, which can estimate the angular velocity of the filaments on frame-by-frame time resolution. After pre-processing, the frames are two-dimensional (2D) Fourier-transformed, then the resulting 2D Fourier magnitude spectra are transformed to log-polar coordinates, and finally the 2D cross-correlation coefficient function (CCCF) is calculated between the consecutive frames. The displacement of the CCCF’s peak along the angular coordinate estimates the angle of rotation of the most intense structure in the frame. Further, the proposed angular velocity estimation method is tested and validated for its accuracy and robustness by applying it to rotating Gaussian-structures. The method is also applied to gas-puff imaging measurements of filaments in National Spherical Torus Experiment plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quantum corrections for spinning particles in de Sitter

We compute the one-loop quantum corrections to the gravitational potentials of a spinning point particle in a de Sitter background, due to the vacuum polarisation induced by conformal fields in an effective field theory approach. We consider arbitrary conformal field theories, assuming only that the theory contains a large number N of fields in order to separate their contribution from the one induced by virtual gravitons. The corrections are described in a gauge-invariant way, classifying the induced metric perturbations around the de Sitter background according to their behaviour under transformations on equal-time hypersurfaces. There are six gauge-invariant modes: two scalar Bardeen potentials, one transverse vector and one transverse traceless tensor, of which one scalar and the vector couple to the spinning particle. The quantum corrections consist of three different parts: a generalisation of the flat-space correction, which is only significant at distances of the order of the Planck length; a constant correction depending on the undetermined parameters of the renormalised effective action; and a term which grows logarithmically with the distance from the particle. This last term is the most interesting, and when resummed gives a modified power law, enhancing the gravitational force at large distances. As a check on the accuracy of our calculation, we recover the linearised Kerr-de Sitter metric in the classical limit and the flat-space quantum correction in the limit of vanishing Hubble constant.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Polarizable atomic multipole X-ray refinement: application to peptide crystals

A method to accelerate the computation of structure factors from an electron density described by anisotropic and aspherical atomic form factors via fast Fourier transformation is described for the first time. Recent advances in computational chemistry have produced force fields based on a polarizable atomic multipole description of biomolecular electrostatics. In this work, the Atomic Multipole Optimized Energetics for Biomolecular Applications (AMOEBA) force field is applied to restrained refinement of molecular models against X-ray diffraction data from peptide crystals. A new formalism is also developed to compute anisotropic and aspherical structure factors using fast Fourier transformation (FFT) of Cartesian Gaussian multipoles. Relative to direct summation, the FFT approach can give a speedup of more than an order of magnitude for aspherical refinement of ultrahigh-resolution data sets. Use of a sublattice formalism makes the method highly parallelizable. Application of the Cartesian Gaussian multipole scattering model to a series of four peptide crystals using multipole coefficients from the AMOEBA force field demonstrates that AMOEBA systematically underestimates electron density at bond centers. For the trigonal and tetrahedral bonding geometries common in organic chemistry, an atomic multipole expansion through hexadecapole order is required to explain bond electron density. Alternatively, the addition of interatomic scattering (IAS) sites to the AMOEBA-based density captured bonding effects with fewer parameters. For a series of four peptide crystals, the AMOEBA–IAS model lowered R{sub free} by 20–40% relative to the original spherically symmetric scattering model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Heterogeneous processes: Laboratory, field, and modeling studies

The efficiencies of chemical families such as ClO(x) and NO(x) for altering the total abundance and distribution of stratospheric ozone are controlled by a partitioning between reactive (active) and nonreactive (reservoir) compounds within each family. Gas phase thermodynamics, photochemistry, and kinetics would dictate, for example, that only about 1 percent of the chlorine resident in the lower stratosphere would be in the form of active Cl or ClO, the remainder existing in the reservoir compounds HCl and ClONO2. The consistency of this picture was recently challenged by the recognition that important chemical transformations take place on polar regions: the Airborne Antarctic Ozone Experiment (AAOE) and the Airborne Arctic Stratospheric Expedition (AASA). Following the discovery of the Antarctic ozone hole, Solomon et al. suggested that the heterogeneous chemical reaction: ClONO2(g)+HCl(s) yields Cl2(g)+HNO3(s) could play a key role in converting chlorine from inactive forms into a species (Cl2) that would rapidly dissociate in sunlight to liberate atomic chlorine and initiate ozone depletion. The symbols (s) and (g) denote solid phase, or adsorbed onto a solid surface, and gas phase, respectively, and represent the approach by which such a reaction is modeled rather than the microscopic details of the reaction. The reaction was expected to be most important at altitudes where PSC's were most prevalent (10 to 25 km), thereby extending the altitude range over which chlorine compounds can efficiently destroy ozone from the 35 to 45 km region (where concentrations of active chlorine are usually highest) to lower altitudes where the ozone concentration is at its peak. This chapter will briefly review the current state of knowledge of heterogeneous processes in the stratosphere, emphasizing those results obtained since the World Meteorological Organization (WMO) conference. Sections are included on laboratory investigations of heterogeneous reactions, the characteristics and climatology of PSC's, stratospheric sulfate aerosols, and evidence of heterogeneous chemical processing.

Poole, Lamont R.↗