Search NASA⌕ Search

SEARCH · Search NASA

Results for “Power spectral density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Scintillation in an earth-to-space propagation path.

Results of an experiment to measure the scintillation at a satellite from a ground-based laser transmitter. The GEOS-II satellite in a nearly circular orbit of 1250 km was illuminated by a ground-based laser tracking station using a 4880-A CW argon laser. A detector aboard the satellite measured the incident light and telemetered the data to recording equipment on the ground. Log-amplitude variance, probability distributions, and scintillation frequency distributions are derived from the data. The probability distribution is shown to be log-normal. Log-amplitude variance and normalized power spectral density are shown to be within the limits measured for stellar scintillation.-

Minott, P. O.↗
NASA NTRS1972

Serial segment method for measuring remnant

For tracking tasks where a sum of sine waves forcing function is used it is often difficult and/or expensive to obtain the pilot's remnant in the vicinity of the sine waves. For the case where each sine wave has at least four times an integer number of cycle per run length, this paper illustrates the serial segments method for measuring remnant power spectral density in a frequency band centered on each sine wave. This method can be implemented on digital, hybrid, or analog Fourier coefficient analyzers, and is particularly advantageous on the latter since properties of Fourier coefficients are exploited to yield both a remnant measure and an improved estimate of the correlated component.

Magdaleno, R. E.↗
NASA NTRS1972

Random response of rectangular panels to the pressure field beneath a turbulent boundary layer in subsonic flows

The response of a rectangular panel under the excitation of a turbulent boundary layer with a zero longitudinal mean pressure gradient in a subsonic flow was studied in detail. The method of normal mode was used together with the technique of spectral analysis. Both simply supported and clamped edge conditions of a panel were considered, and the displacement power spectral density of the panel response was computed. The results for the clamped edge panel compare favorably with existing data. Charts of structural acceptance, which provide a framework for estimating the response of other rectangular panels, are presented, and the physical significances of structural acceptances discussed.

Chyu, W. J.↗
NASA NTRS1972

An investigation of the unsteady flow associated with plume induced flow separation

A wind tunnel study of the basic nature of plume induced flow separation is reported with emphasis on the unsteady aspects of the flow. Testing was conducted in a 6 inch by 6 inch blow-down supersonic wind tunnel. A cone-cylinder model with a pluming jet was used as the test model. Tests were conducted with a systematic variation in Mach number and plume pressure. Results of the tests are presented in the form of root-mean-squared surface pressure levels, power spectral densities, photographs of the flow field from which shock angles and separation lengths were taken, and time-averaged surface pressure profiles.

Boggess, A. L., Jr.↗
NASA NTRS1972

GEOS-2 C-band radar system project. Spectral analysis as related to C-band radar data analysis

Work performed on spectral analysis of data from the C-band radars tracking GEOS-2 and on the development of a data compaction method for the GEOS-2 C-band radar data is described. The purposes of the spectral analysis study were to determine the optimum data recording and sampling rates for C-band radar data and to determine the optimum method of filtering and smoothing the data. The optimum data recording and sampling rate is defined as the rate which includes an optimum compromise between serial correlation and the effects of frequency folding. The goal in development of a data compaction method was to reduce to a minimum the amount of data stored, while maintaining all of the statistical information content of the non-compacted data. A digital computer program for computing estimates of the power spectral density function of sampled data was used to perform the spectral analysis study.

Source record↗
NASA NTRS1972

Image correlation and sampling study

The development of analytical approaches for solving image correlation and image sampling of multispectral data is discussed. Relevant multispectral image statistics which are applicable to image correlation and sampling are identified. The general image statistics include intensity mean, variance, amplitude histogram, power spectral density function, and autocorrelation function. The translation problem associated with digital image registration and the analytical means for comparing commonly used correlation techniques are considered. General expressions for determining the reconstruction error for specific image sampling strategies are developed.

Popp, D. J.↗
NASA NTRS1973

Effects of vibration and shock on the performance of gas-bearing space-power Brayton cycle turbomachinery. 2: Sinusoidal and random vibration

The vibration response of a gas-bearing rotor-support system was analyzed experimentally documented for sinusoidal and random vibration environments. The NASA Brayton Rotating Unit (BRU), 36,000 rpm; 10 KWe turbogenerator; was subjected in the laboratory to sinusoidal and random vibrations to evaluate the capability of the BRU to (1) survive the vibration levels expected to be encountered during periods of nonoperation and (2) operate satisfactorily (that is, without detrimental bearing surface contacts) at the vibration levels expected during normal BRU operation. Response power spectral density was calculated for specified input random excitation, with particular emphasis upon the dynamic motions of the thrust bearing runner and stator. A three-mass model with nonlinear representation of the engine isolator mounts was used to calculate axial rotor-bearing shock response.

Tessarzik, J. M.↗
NASA NTRS1973

On Digital Simulation of Multicorrelated Random Processes and Its Applications

Two methods are described to simulate, on a digital computer, a set of correlated, stationary, and Gaussian time series with zero mean from the given matrix of power spectral densities and cross spectral densities. The first method is based upon trigonometric series with random amplitudes and deterministic phase angles. The random amplitudes are generated by using a standard random number generator subroutine. An example is given which corresponds to three components of wind velocities at two different spatial locations for a total of six correlated time series. In the second method, the whole process is carried out using the Fast Fourier Transform approach. This method gives more accurate results and works about twenty times faster for a set of six correlated time series.

Sinha, A. K.↗
NASA NTRS1972

Nonstationary envelope process and first excursion probability.

The definition of stationary random envelope proposed by Cramer and Leadbetter, is extended to the envelope of nonstationary random process possessing evolutionary power spectral densities. The density function, the joint density function, the moment function, and the crossing rate of a level of the nonstationary envelope process are derived. Based on the envelope statistics, approximate solutions to the first excursion probability of nonstationary random processes are obtained. In particular, applications of the first excursion probability to the earthquake engineering problems are demonstrated in detail.

Yang, J.-N.↗
NASA NTRS1973

Using computers to analyze continuous data.

Dynamic field measurements often involve large quantities of continuous data, which must be analyzed and interpreted to obtain meaningful information. The processing can often be accomplished by tape-recording the data in analog form, performing off-line digitalization, and using the result as an input to statistical programs on a digital computer. A time series analysis was used to obtain power spectral density (PSD) curves to identify dominant frequencies. Representative PSD plots were obtained for STOL aircraft during cruise. Vibrational energy was clearly concentrated below 0.1 Hz, and was much higher in the vertical than in the lateral direction.

Catherines, J. J.↗
NASA NTRS1974

Skylab 2 ground winds data reduction and statistical analysis

A ground winds test was conducted on the Skylab 2 spacecraft in a subsonic wind tunnel and the results were tape recorded for analysis. The data reduction system used to analyze the tapes for full scale, first and second mode bending moments, or acceleration plots versus dynamic pressure or wind velocity is explained. Portions of the Skylab 2 tape data were analyzed statistically in the form of power spectral densities, autocorrelations, and cross correlations to introduce a concept of using system response decay as a measure of linear system damping.

Source record↗
NASA NTRS1974

Engineering studies related to the GEOS-C radar altimeter

Experiment requirements, technical characteristics, and GEOS-C radar altimeter related analyses are discussed along with results of a study on engineering test data requirements. Statistical analyses related to determination of wave height resolution achievable as a function of system characteristics and averaging period are described, in addition to a discussion on the desirability of using computer procedures to compensate for altitude tracker time-jitter. Data processing considerations for the GEOS-C system are examined. An extensive analysis of the spatial filter effect is given and results of a computation of geoidal power spectral density, based on Skylab altimeter data, is displayed and interpreted in terms of projected GEOS-C random errors. This information is then used in deriving minimum-mean-square filter procedures for both geoid undulation and slope data. The characteristics of mean received waveforms as a function of off-nadir angle are used to obtain tracker bias as a function of sea state and pointing angle. The angle estimation process proposed by the GEOS-C hardware contractor is also investigated from a standpoint of achievable angular resolution.

Miller, L. S.↗
NASA NTRS1974

A dynamic pressure generator for checking complete pressure sensing systems installed on an airplane

A portable dynamic pressure generator, how it operates, and a test setup on an airplane are described. The generator is capable of providing a sinusoidal pressure having a peak-to-peak amplitude of 3.5 N/sq cm (5 psi) at frequencies ranging from 100 hertz to 200 hertz. A typical power spectral density plot of data from actual dynamic pressure fluctuation tests within the air inlet of the YF-12 airplane is presented.

Demarco, D. M.↗
NASA NTRS1973

Measurement of instrument noise spectra at frequencies below 1 hertz

The use of peak-to-peak values in describing output noise of a magnetometer or low frequency amplifier is of questionable value for certain applications. A more precise statement of instrument noise is made with a plot of the noise power spectral density vs frequency. The spectral density plot provides a rich source of information which can be used in the selection and testing of such instrumentation.

Snare, R. C.↗
NASA NTRS1973

Pipe flow measurements of turbulence and ambiguity using laser-Doppler velocimetry

The laser-Doppler ambiguities predicted by George and Lumley (1973) have been verified experimentally for turbulent pipe flows. Experiments were performed at Reynolds numbers from 5000 to 15,000 at the center line and near the wall. Ambiguity levels were measured from power spectral densities of FM demodulated laser signals and were compared with calculations based on the theory. The turbulent spectra for these water flows after accounting for the ambiguity were equivalent to hot-film measurements at similar Reynolds numbers. The feasibility of laser-Doppler measurements very close to the wall in shear flows is demonstrated.

Berman, N. S.↗
NASA NTRS1974

Plasma waves in the dayside polar cusp. II - Magnetopause and polar magnetosheath

During the outbound pass of Nov. 1, 1968, Ogo 5 sporadically encountered the low-altitude polar cusp at low magnetic latitudes. The spacecraft remained in the cusp beyond six earth radii, and it then traversed the interface region between the magnetospheric cusp and the magnetosheath. Two large scale discontinuities were detected in this sheath-cusp transition region, and several possible interpretations are evaluated here. At 1427 UT, local changes in magnetic field orientation and the variation in ULF magnetic power spectral density were typical of shifts detected at the magnetopause, although the spacecraft did not traverse a true boundary of warm plasma at this point. The second discontinuity, detected at 1456 UT, resembled a collisionless shock, and it was characterized by observations of intense, impulsive VLF electric field bursts and rapid local variations in both total ion flux and differential electron flux. The simplest interpretation is that Ogo 5 had traversed a standing shock within the sheath.

Scarf, F. L.↗
NASA NTRS1974

Correlation analysis of X-ray emission from Cygnus X-1

Normalized autocorrelation and cross-correlation coefficients have been calculated for the X-ray emission of Cygnus X-1 in two energy bins, 2.1-5.1 keV and 5.1-12 keV. The analysis shows a strong correlation between the pulsations in the two energy bins, with the low-energy pulsations lagging behind the high-energy ones, or alternatively a shorter duration of the pulse trains in the high-energy bin. The power spectral density derived from the autocorrelation functions indicates a larger contribution of the high-frequency components for the higher-energy X-rays.

Brinkman, A. C.↗
NASA NTRS1974

Sound radiation from a subsonic rotor subjected to turbulence

The broadband sound radiated by a subsonic rotor subjected to turbulence in the approach stream has been analyzed. The power spectral density of the sound intensity has been found to depend on a characteristic time scale-namely, the integral scale of the turbulence divided by the axial flow velocity-as well as several length-scale ratios. These consist of the ratio of the integral scale to the acoustic wavelength, rotor radius, and blade chord. Due to the simplified model chosen, only a limited number of cascade parameters appear. Limited comparisons with experimental data indicate good agreement with predicted values.

Sevik, M.↗