Search NASA⌕ Search

SEARCH · Search NASA

Results for “Principal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Principal sources and dispersal patterns of suspended particulate matter in nearshore surface waters of the northeast Pacific Ocean and the Hawaiian Islands

The author has identified the following significant results. ERTS-1 multispectral scanner imagery of the nearshore surface waters of the Northeast Pacific Ocean is proving to be a useful tool for determining source and dispersal of suspended particulate matter. The principal sources of the turbid water, seen best on the green and red bands, are river and stream effluents and actively eroding coastlines; secondary sources are waste effluents and production of planktonic organisms, but these may sometimes be masked by the very turbid plumes of suspended sediment being discharged into the nearshore zone during times of high river discharge. The configuration and distribution of the plumes of turbid water also can be used to infer near-surface current directions. Comparison of imagery of the nearshore water off the northern California coast from October 1972 and January 1973 shows a reversal of the near-surface currents, from predominantly south-setting in the fall (California Current) to north-setting in the winter (Davidson Current).

Carlson, P. R.↗

Perturbation of the calcium principal series by metastable calcium atoms

The absorption of the principal series of calcium is observed with about 4% of the atoms placed in the 4s4p 3P level by selective laser excitation, and is compared with the absorption with all atoms in the ground state. We observe a broadening of the absorption lines accompanied by a shift to longer wavelengths and the occurrence of satellite lines at shorter wavelengths.

Mcilrath, T. J.↗

Enhancement of LANDSAT imagery by combination of multispectral classification and principal component analysis

Digital enhancement of LANDSAT imagery was obtained by application of principal component analysis separately on each of the classes previously determined in a multispectral classification step. Each part of the image is thus enhanced whatever its spectral signature may be. A document was obtained which is a synthesis between a conventional image and an ordinary computerized classification. The interpreter can, at the same time, take into account not only the classification but also other features such as context and structure. An example is discussed with the help of geological interpretation.

Fontanel, A.↗

Cygnus A at 99 GHz: Observations of the three principal components and interpretation of the central source

The three principal emission components of Cygnus A were observed at 99 GHz, the highest frequency at which radio measurements of this source have been accomplished. The observations show no definite indication of a high-frequency cutoff in the spectrum of the compact central component, which perhaps may be attributed to an optically thin synchrotron source that peaks at a frequency of several hundred GHz.

Hobbs, R. W.↗

A bibliography of planetary geology principal investigators and their associates, 1976-1978

This bibliography cites publications submitted by 484 principal investigators and their associates who were supported through NASA's Office of Space Sciences Planetary Geology Program. Subject classifications include: solar system formation, comets, and asteroids; planetary satellites, planetary interiors, geological and geochemical constraints on planetary evolution; impact crater studies, volcanism, eolian studies, fluvian studies, Mars geological mapping; Mercury geological mapping; planetary cartography; and instrument development and techniques. An author/editor index is provided.

Source record↗

Cygnus A at 99 GHz - Observations of the three principal components and interpretation of the central source

The three principal emission components of Cygnus A have been observed at 99 GHz, the highest frequency at which radio measurements of this source have been accomplished. The observations show no definite indication of a high-frequency cutoff in the spectrum of the compact central component, which perhaps may be attributed to an optically thin synchrotron source that peaks at a frequency of several hundred GHz.

Hobbs, R. W.↗

The viscoelastic behavior of the principal compliance matrix of a unidirectional graphite/epoxy composite

The time-temperature response of the principal compliances of a unidirectional graphite/epoxy composite was determined. It is shown that two components of the compliance matrix are time and temperature independent and that the compliance matrix is symmetric for the viscoelastic composite. The time-temperature superposition principle is used to determine shift factors which are independent of fiber orientation, for fiber angles that vary from 10 D to 90 D with respect to the load direction.

Morris, D. H.↗

Principal component greenness transformation in multitemporal agricultural Landsat data

A data compression technique for multitemporal Landsat imagery which extracts phenological growth pattern information for agricultural crops is described. The principal component greenness transformation was applied to multitemporal agricultural Landsat data for information retrieval. The transformation was favorable for applications in agricultural Landsat data analysis because of its physical interpretability and its relation to the phenological growth of crops. It was also found that the first and second greenness eigenvector components define a temporal small-grain trajectory and nonsmall-grain trajectory, respectively.

Abotteen, R. A.↗

Calculation of residual principal stresses in CVD boron on carbon filaments

A three-dimensional finite element model of the chemical vapor deposition of boron on a carbon substrate (B/C) is developed. The model includes an expansion of the boron after deposition due to atomic rearrangement and includes creep of the boron and carbon. Curves are presented showing the variation of the principal residual stresses and the filament elongation with the parameters defining deposition strain and creep. The calculated results are compared with experimental axial residual stress and elongation measurements made on B/C filaments. For good agreement between calculated and experimental results, the deposited boron must continue to expand after deposition, and the build up of residual stresses must be limited by significant boron and carbon creep rates.

Behrendt, D. R.↗

A bibliography of planetary geology principal investigators and their associates, 1979 - 1980

This bibliography cites 698 reports and articles published from May 1979 through May 1980 by principal investigators and associates who received support from NASA's Office of Space Science, as part of the Planetary Geology program. Entries are arranged in the following categories: (1) general interest; (2) solar system, asteroids, comets, and satellites; (3) structure, tectonics, and stratigraphy; (4) regolith and volatiles; (5) volcanism; (6) impact craters; (7) Eolian glacial An author index is provided. The bibliography serves as a companion document to NASA TM 81776, "Reports of Planetary Geology Programs, 1979-1980".

Lettvin, E.↗

Principal component analysis of solar flares in the soft X-ray flux

The paper considers principal component analysis of solar flares in the soft X-ray flux, a technique for extracting the salient features from a mass of data. The method applies particularly to the analysis of nonstationary ensembles, and its computations require the evaluation of eigenvalues of matrices. The Eispack matrix eigen system routines were used to analyze full-disk proportional-counter data from the X-ray event analyzer which was part of the Skylab experiment. Empirical orthogonal functions were derived for events in the soft X-ray spectrum between 2.5 and 20 A during different time periods, indicating that about 90% of the cumulative power of each analyzed flare is contained in the largest eigenvector. The first two largest eigenvectors are sufficient for an empirical curve fit through the raw data and a characterization of solar flares in the soft X-ray flux, and power spectra of two largest eigenvectors reveal a reported periodicity of about 5 min.

Teuber, D. L.↗

Calculation of residual principal stresses in CVD boron on carbon filaments

A three-dimensional finite element model of the chemical vapor deposition (CVD) of boron on a carbon substrate (B/C) is developed. The model includes an expansion of the boron after deposition due to atomic rearrangement and includes creep of the boron and carbon. Curves are presented to show how the principal residual stresses and the filament elongation vary as the parameters defining deposition strain and creep are varied. The calculated results are compared with experimental axial residual stress and elongation measurements made on B/C filaments. This comparison requires that for good agreement between calculated and experimental results, the deposited boron must continue to expand after deposition, and that the build-up of residual stresses is limited by significant boron and carbon creep rates.

Behrendt, D. R.↗

The viscoelastic behavior of the principal compliance matrix of a unidirectional graphite/epoxy composite

A testing program was conducted to determine the time-temperature response of the principal compliances of a unidirectional graphite/epoxy composite. It was shown that the two components of the compliance matrix are time and temperature independent. In addition, the compliance matrix is symmetric for the viscoelastic composite. The time-temperature superposition principle is used to determine shift factors. It was shown that the shift factors are independent of fiber orientation for fiber angles that vary from 10 to 90 deg with respect to the load direction.

Morris, D. H.↗

Principal components technique analysis for vegetation and land use discrimination

Automatic pre-processing technique called Principal Components (PRINCO) in analyzing LANDSAT digitized data, for land use and vegetation cover, on the Brazilian cerrados was evaluated. The chosen pilot area, 223/67 of MSS/LANDSAT 3, was classified on a GE Image-100 System, through a maximum-likehood algorithm (MAXVER). The same procedure was applied to the PRINCO treated image. PRINCO consists of a linear transformation performed on the original bands, in order to eliminate the information redundancy of the LANDSAT channels. After PRINCO only two channels were used thus reducing computer effort. The original channels and the PRINCO channels grey levels for the five identified classes (grassland, "cerrado", burned areas, anthropic areas, and gallery forest) were obtained through the MAXVER algorithm. This algorithm also presented the average performance for both cases. In order to evaluate the results, the Jeffreys-Matusita distance (JM-distance) between classes was computed. The classification matrix, obtained through MAXVER, after a PRINCO pre-processing, showed approximately the same average performance in the classes separability.

Parada, N. D. J.↗