Results for “Principal Component” — Page 11

NASA NTRS1984

Interior structure of Uranus

Key measurements are discussed which are diagnostic of Uranus' interior structure and evolutionary history, and reviews their present status. Typical interior models have chondritic cores, but have the bulk of their mass in an envelope consisting of ice component, principally H2O. The total amount of free H2 in the planet cannot exceed approximately 1 to 2 earth masses. Measurements of the gravitational moments of Uranus are beginning to be accurate enough to constrain models, but are limited in utility by uncertainty in the rotation period. Discussed is evidence that the outermost planetary layers have a gravitationally significant quantity of denser material (ice component?) in addition to H2 and He. The He/H ratio and the deuterium abundance in the atmosphere may be diagnostic of the planet's previous evolutionary history. It is argued that the planet's interior is likely to now be at a temperature approximately 10(3) deg K. Uranus' interior with Neptune's in a number of ways, considering heat flow, degree of internal differentiation, and possible magnetic field.

Hubbard, W. B.↗

NASA NTRS1984

Spatial variation analyses of Thematic Mapper data for the identification of linear features in agricultural landscapes

A need exists for digitized information pertaining to linear features such as roads, streams, water bodies and agricultural field boundaries as component parts of a data base. For many areas where this data may not yet exist or is in need of updating, these features may be extracted from remotely sensed digital data. This paper examines two approaches for identifying linear features, one utilizing raw data and the other classified data. Each approach uses a series of data enhancement procedures including derivation of standard deviation values, principal component analysis and filtering procedures using a high-pass window matrix. Just as certain bands better classify different land covers, so too do these bands exhibit high spectral contrast by which boundaries between land covers can be delineated. A few applications for this kind of data are briefly discussed, including its potential in a Universal Soil Loss Equation Model.

Pelletier, R. E.↗

NASA NTRS2001

Rotation of EOFs by the Independent Component Analysis: Towards A Solution of the Mixing Problem in the Decomposition of Geophysical Time Series

The Independent Component Analysis is a recently developed technique for component extraction. This new method requires the statistical independence of the extracted components, a stronger constraint that uses higher-order statistics, instead of the classical decorrelation, a weaker constraint that uses only second-order statistics. This technique has been used recently for the analysis of geophysical time series with the goal of investigating the causes of variability in observed data (i.e. exploratory approach). We demonstrate with a data simulation experiment that, if initialized with a Principal Component Analysis, the Independent Component Analysis performs a rotation of the classical PCA (or EOF) solution. This rotation uses no localization criterion like other Rotation Techniques (RT), only the global generalization of decorrelation by statistical independence is used. This rotation of the PCA solution seems to be able to solve the tendency of PCA to mix several physical phenomena, even when the signal is just their linear sum.

Aires, Filipe↗

NASA NTRS2000

Rotation of EOFs by the Independent Component Analysis: Towards a Solution of the Mixing Problem in the Decomposition of Geophysical Time Series

The Independent Component Analysis is a recently developed technique for component extraction. This new method requires the statistical independence of the extracted components, a stronger constraint that uses higher-order statistics, instead of the classical decorrelation, a weaker constraint that uses only second-order statistics. This technique has been used recently for the analysis of geophysical time series with the goal of investigating the causes of variability in observed data (i.e. exploratory approach). We demonstrate with a data simulation experiment that, if initialized with a Principal Component Analysis, the Independent Component Analysis performs a rotation of the classical PCA (or EOF) solution. This rotation uses no localization criterion like other Rotation Techniques (RT), only the global generalization of decorrelation by statistical independence is used. This rotation of the PCA solution seems to be able to solve the tendency of PCA to mix several physical phenomena, even when the signal is just their linear sum.

Aires, Filipe↗

NASA NTRS1998

Incorporating Endmember Variability into Spectral Mixture Analysis Through Endmember Bundles

Variation in canopy structure and biochemistry induces a concomitant variation in the top-of-canopy spectral reflectance of a vegetation type. Hence, the use of a single endmember spectrum to track the fractional abundance of a given vegetation cover in a hyperspectral image may result in fractions with considerable error. One solution to the problem of endmember variability is to increase the number of endmembers used in a spectral mixture analysis of the image. For example, there could be several tree endmembers in the analysis because of differences in leaf area index (LAI) and multiple scatterings between leaves and stems. However, it is often difficult in terms of computer or human interaction time to select more than six or seven endmembers and any non-removable noise, as well as the number of uncorrelated bands in the image, limits the number of endmembers that can be discriminated. Moreover, as endmembers proliferate, their interpretation becomes increasingly difficult and often applications simply need the aerial fractions of a few land cover components which comprise most of the scene. In order to incorporate endmember variability into spectral mixture analysis, we propose representing a landscape component type not with one endmember spectrum but with a set or bundle of spectra, each of which is feasible as the spectrum of an instance of the component (e.g., in the case of a tree component, each spectrum could reasonably be the spectral reflectance of a tree canopy). These endmember bundles can be used with nonlinear optimization algorithms to find upper and lower bounds on endmember fractions. This approach to endmember variability naturally evolved from previous work in deriving endmembers from the data itself by fitting a triangle, tetrahedron or, more generally, a simplex to the data cloud reduced in dimension by a principal component analysis. Conceptually, endmember variability could make it difficult to find a simplex that both surrounds the data cloud and has vertices that are realistic endmember spectra with reflectances between 0 and 1. In this paper, we create endmember bundles and bounding fraction images for an AVIRIS subscene simulated with a plant canopy radiative transfer model. The simulated subscene is spatially patterned after a subscene from the AVIRIS image acquired August, 1993 over La Copita, Texas. In addition, for comparison, we performed a traditional unmixing with image endmembers.

Bateson, C. Ann↗

NASA NTRS1991

Airframe Noise

Current understanding of airframe noise was reviewed as represented by experiment at model and full scale, by theoretical modeling, and by empirical correlation models. The principal component sources are associated with the trailing edges of wing and tail, deflected trailing edge flaps, flap side edges, leading edge flaps or slats, undercarriage gear elements, gear wheel wells, fuselage and wing boundary layers, and panel vibration, together with many minor protrusions like radio antennas and air conditioning intakes which may contribute significantly to perceived noise. There are also possibilities for interactions between the various mechanisms. With current engine technology, the principal airframe noise mechanisms dominate only at low frequencies, typically less than 1 kHz and often much lower, but further reduction of turbomachinery noise in particular may make airframe noise the principal element of approach noise at frequencies in the sensitive range.

Trailing-Edge↗

NASA NTRS1987

Remote measurement of in-plane diffusivity components in plates

A method of determining thermal diffusivity in thin plates is presented. The method, using infrared images of evolving thermal patterns previously injected with a laser, is noncontacting, one-sided, and remote. It does not require independent estimates of either the emissivity of the sample or the sample thickness. With a line-segment pattern for thermal input, it yields the inplane components of the diffusivity tensor in anisotropic materials and also the rate of heat loss to the environment of the plate. Two methods of data analysis are presented, one corresponding to a heating line of general cross section and the other considering a Gaussian cross section, thereby saving considerable computer time. Both methods produce a statistical evaluation of measurement quality as well as estimates of diffusivity and loss rate. Results are shown for plates of metals and graphite-epoxy composite materials. Principal components and orientation for the diffusivity tensor are obtained in the anisotropic graphite-epoxy sample.

Welch, Christopher S.↗

NASA NTRS2004

Multifunction Imaging and Spectroscopic Instrument

A proposed optoelectronic instrument would perform several different spectroscopic and imaging functions that, heretofore, have been performed by separate instruments. The functions would be reflectance, fluorescence, and Raman spectroscopies; variable-color confocal imaging at two different resolutions; and wide-field color imaging. The instrument was conceived for use in examination of minerals on remote planets. It could also be used on Earth to characterize material specimens. The conceptual design of the instrument emphasizes compactness and economy, to be achieved largely through sharing of components among subsystems that perform different imaging and spectrometric functions. The input optics for the various functions would be mounted in a single optical head. With the exception of a targeting lens, the input optics would all be aimed at the same spot on a specimen, thereby both (1) eliminating the need to reposition the specimen to perform different imaging and/or spectroscopic observations and (2) ensuring that data from such observations can be correlated with respect to known positions on the specimen. The figure schematically depicts the principal components and subsystems of the instrument. The targeting lens would collect light into a multimode optical fiber, which would guide the light through a fiber-selection switch to a reflection/ fluorescence spectrometer. The switch would have four positions, enabling selection of spectrometer input from the targeting lens, from either of one or two multimode optical fibers coming from a reflectance/fluorescence- microspectrometer optical head, or from a dark calibration position (no fiber). The switch would be the only moving part within the instrument.

Mouroulis, Pantazis↗

NASA NTRS2010

Soil Components in Heterogeneous Impact Glass in Martian Meteorite EETA79001

Martian soil composition can illuminate past and ongoing near-surface processes such as impact gardening [2] and hydrothermal and volcanic activity [3,4]. Though the Mars Exploration Rovers (MER) have analyzed the major-element composition of Martian soils, no soil samples have been returned to Earth for detailed chemical analysis. Rao et al. [1] suggested that Martian meteorite EETA79001 contains melted Martian soil in its impact glass (Lithology C) based on sulfur enrichment of Lithology C relative to the meteorite s basaltic lithologies (A and B) [1,2]. If true, it may be possible to extract detailed soil chemical analyses using this meteoritic sample. We conducted high-resolution (~0.3 m/pixel) element mapping of Lithology C in thin section EETA79001,18 by energy dispersive spectrometry (EDS). We use these data for principal component analysis (PCA).

Schrader, C. M.↗

NASA NTRS2022

Intrinsic Dimensionality as a Metric for the Impact of Mission Design Parameters

High-resolution space-based spectral imaging of the Earth's surface delivers critical information for monitoring changes in the Earth system as well as resource management and utilization. Orbiting spectrometers are built according to multiple design parameters, including ground sampling distance (GSD), spectral resolution, temporal resolution, and signal-to-noise ratio. Different applications drive divergent instrument designs, so optimization for wide-reaching missions is complex. The Surface Biology and Geology component of NASA's Earth System Observatory addresses science questions and meets applications needs across diverse fields, including terrestrial and aquatic ecosystems, natural disasters, and the cryosphere. The algorithms required to generate the geophysical variables from the observed spectral imagery each have their own inherent dependencies and sensitivities, and weighting these objectively is challenging. Here, we introduce intrinsic dimensionality (ID), a measure of information content, as an applications-agnostic, data-driven metric to quantify performance sensitivity to various design parameters. ID is computed through the analysis of the eigenvalues of the image covariance matrix, and can be thought of as the number of significant principal components. This metric is extremely powerful for quantifying the information content in high-dimensional data, such as spectrally resolved radiances and their changes over space and time. We find that the ID decreases for coarser GSD, decreased spectral resolution and range, less frequent acquisitions, and lower signal-to-noise levels. This decrease in information content has implications for all derived products. ID is simple to compute, providing a single quantitative standard to evaluate combinations of design parameters, irrespective of higher-level algorithms, products, applications, or disciplines.

Intrinsic dimensionality↗

NASA NTRS1984

Lightweight carbon-carbon thermal protection system for STARPROBE

This paper describes the preliminary design, development, and initial testing of prototype carbon-carbon components of the thermal protection system of the NASA STARPROBE spacecraft. The thermal protection system is designed to limit the spacecraft scientific instrument package to a maximum temperature of 55 C during the time of closest approach to the earth's sun when the peak radiative heating rate reaches 393 w/sq cm. The thermal protection system is comprised of a carbon-carbon thin shell primary shield and two carbon-carbon sandwich construction secondary shields which block reradiation from the primary shield to the spacecraft. These shields are joined and stiffened by carbon-carbon structural members and attached to the spacecraft with eight thin-walled carbon-carbon struts. Prototype parts of the principal components have been fabricated and will be tested in a solar radiative flux environment simulating peak mission values in late 1984.

Dirling, R. B., Jr.↗

NASA NTRS2002

Evidence of an Intrinsic Intraseasonal Oscillation over Tropical South America During Austral Summer

The intraseasonal variation (ISV) in the 30-60 day band, also known as Madden-Julian oscillation (MJO), has been studied for decades. Madden and Julian showed that the oscillation originated from the western Indian Ocean, propagated eastward, got enhanced over the maritime continent and weakened after passing over the dateline. Composite studies showed evidences of a signal in upper and lower level zonal wind propagating around the globe during an oscillation. Theoretical studies pointed out that the interaction with the warm ocean surface and the coupling with the convective and radiative processes in the atmosphere could manifest the oscillation, which propagates eastward via mutual feedbacks between the wave motions and the cumulus heating. Over tropical South America, no independent 30-60 day oscillation has been reported so far, despite that Amazon is the most distinct tropical convection center over the western hemisphere and the fluxes from its surface of tropical rainforests are close to that from the warm tropical ocean. Liebmann et al. showed a distinct spectral peak of 40-50 day oscillation in outgoing longwave radiation (OLR) over tropical South America and considered that was manifested by the MJO propagation. Nogues-Paegle et al. (2000) focused on a dipole pattern of the OLR anomaly with centers of action over the South Atlantic Convergence Zone (SACZ) and the subtropical plain. They used the regional 10-90 day filtered data and demonstrated this pattern could be represented by the fifth mode of the rotated empirical orthogonal function. Its principal component was further analyzed using the singular spectrum analysis. Their result showed two oscillatory modes with periods of 36-40 days and 22-28 days, of which the former was related to the MJO influence and the latter linked to the remote forcing over southwest of Australia, which produced a wave train propagating southeastward, rounding the southern tip of South America and returning back toward the northeast. The 22-28 day mode has distinct impact on SACZ, responsible for the regional seesaw pattern of alternating dry and wet conditions. In this study we will focus on the 30-60-day spectral band and investigate whether the independent oscillation source over tropical South America is existed. First, we will show the seasonal dependence of the tropical South American ISV in Section 3. Then, the leading principal modes of 30-60 day bandpass filtered 850-hPa velocity potential (VP850) will be computed to distinguish the stationary ISV over tropical South America (SISA) from the propagating MJO in the austral summertime in Section 4. The importance of SISA in representing the regional ISV over South America will be discussed. In Section 5, we will demonstrate the mass oscillation regime of SISA, which is well separated from that of MJO by the Andes, and the convective coupling with rainfall. The dynamical response of SISA and the impact on the South American summer monsoon (SASM) will be presented. Finally, we will give the concluding remarks.

Zhou, Jiayu↗

NASA NTRS1990

Regional climate change predictions from the Goddard Institute for Space Studies high resolution GCM

Model simulations of global climate change are seen as an essential component of any program aimed at understanding human impact on the global environment. A major weakness of current general circulation models (GCMs), however, is their inability to predict reliably the regional consequences of a global scale change, and it is these regional scale predictions that are necessary for studies of human/environmental response. This research is directed toward the development of a methodology for the validation of the synoptic scale climatology of GCMs. This is developed with regard to the Goddard Institute for Space Studies (GISS) GCM Model 2, with the specific objective of using the synoptic circulation form a doubles CO2 simulation to estimate regional climate change over North America, south of Hudson Bay. This progress report is specifically concerned with validating the synoptic climatology of the GISS GCM, and developing the transfer function to derive grid-point temperatures from the synoptic circulation. Principal Components Analysis is used to characterize the primary modes of the spatial and temporal variability in the observed and simulated climate, and the model validation is based on correlations between component loadings, and power spectral analysis of the component scores. The results show that the high resolution GISS model does an excellent job of simulating the synoptic circulation over the U.S., and that grid-point temperatures can be predicted with reasonable accuracy from the circulation patterns.

Crane, Robert G.↗

NASA NTRS2006

Wire-Mesh-Based Sorber for Removing Contaminants from Air

A paper discusses an experimental regenerable sorber for removing CO2 and trace components principally, volatile organic compounds, halocarbons, and NH3 from spacecraft cabin air. This regenerable sorber is a prototype of what is intended to be a lightweight alternative to activated-carbon and zeolite-pellet sorbent beds now in use. The regenerable sorber consists mainly of an assembly of commercially available meshes that have been coated with a specially-formulated washcoat containing zeolites. The zeolites act as the sorbents while the meshes support the zeolite-containing washcoat in a configuration that affords highly effective surface area for exposing the sorbents to flowing air. The meshes also define flow paths characterized by short channel lengths to prevent excessive buildup of flow boundary layers. Flow boundary layer resistance is undesired because it can impede mass and heat transfer. The total weight and volume comparison versus the atmosphere revitalization equipment used onboard the International Space Station for CO2 and trace-component removal will depend upon the design details of the final embodiment. However, the integrated mesh-based CO2 and trace-contaminant removal system is expected to provide overall weight and volume savings by eliminating most of the trace-contaminant control equipment presently used in parallel processing schemes traditionally used for spacecraft. The mesh-based sorbent media enables integrating the two processes within a compact package. For the purpose of regeneration, the sorber can be heated by passing electric currents through the metallic meshes combined with exposure to space vacuum. The minimal thermal mass of the meshes offers the potential for reduced regeneration-power requirements and cycle time required for regeneration compared to regenerable sorption processes now in use.

Perry, Jay↗

NASA NTRS2015

Non-destructive Evaluation of Bonds Between Fiberglass Composite and Metal

To assess the integrity and reliability of an adhesive joint in an automotive composite component, several non-destructive evaluation (NDE) methodologies are correlated to lap shear bond strengths. A glass-fabric-reinforced composite structure was bonded to a metallic structure with a two-part epoxy adhesive. Samples were subsequently cut and tested in shear, and flaws were found in some areas. This study aims to develop a reliable and portable NDE system for service-level adhesive inspection in the automotive industry. The results of the experimental investigation using several NDE methods are presented and discussed. Fiberglass-to-metal bonding is the ideal configuration for NDE via thermography using excitation with induction heating, due to the conductive metal and non-conductive glass-fiber-reinforced composites. Excitation can be either by a research-grade induction heater of highly defined frequency and intensity, or by a service-level heater, such as would be used for sealing windshields in a body shop. The thermographs thus produced can be captured via a high-resolution infrared camera, with principal component analysis and 2D spatial Laplacian processing. Alternatively, the thermographs can be captured by low resolution thermochromic microencapsulated liquid crystal film imaging, which needs no post-processing and can be very inexpensive. These samples were also examined with phased-array ultrasound. The NDE methods are compared to the lap shear values and to each other for approximate cost, accuracy, and time and level of expertise needed.

Zhao, Selina↗

NASA NTRSDate not supplied

Enabling Intelligent Data Downlink Prioritization of In-Situ Observations through Generalizable and Computationally Inexpensive Anomaly Detection

High-fidelity measurements of magnetic fields and other observed properties, such as energetic particle fluxes, are a necessary component to our understanding of the highly dynamic near-Earth space environment. As our desire to study smaller-scale phenomena such as shocks and dipolorizations has increased, we have been driven to take and telemeter measurements at higher cadences. Unfortunately, many missions are unable to downlink all their captured data due to the well-known data transmission bottleneck at the DSN. These missions must then prioritize their high-cadence data such that the most scientifically useful intervals are transmitted. One simple prioritization technique uses the spacecraft position to telemeter data from only the region of interest. Although easy to implement, this method does not leverage the available scientific data and can omit intervals of useful scientific data when they lie outside the region of interest. The Magnetospheric Multiscale Mission (MMS) uses mission-specific parameterization of several data products to automatically prioritize scientifically useful intervals. Then, MMS verifies the automatically selected intervals by having a domain expert manually select intervals for downlink. The overall complexity required by this technique make it prohibitive for deployment on low-cost platforms (i.e., CubeSats) or on future missions featuring large constellations of satellites such as the Geospace Dynamics Constellation (GDC). We present preliminary results for a simple, generic, and data-driven method of downlink prioritization for magnetic field (and other) measurements. Specifically, Principal Components Analysis (PCA) and One-Class Support Vector Machines (OC-SVMs) are used to detect intervals containing anomalous activity, which can then be prioritized for subsequent downlink. The computational simplicity of this algorithm makes it an excellent candidate for implementation on spaceflight hardware, as well as provide generalizability to a broad range of missions and data products. Initial analysis of this technique has been performed using magnetic field measurements from the Magnetospheric Multiscale Mission and CASSIOP, where it automatically identified scientifically interesting intervals containing Alfvén waves and EMIC activity.

Matthew G. Finley↗

NASA NTRSDate not supplied

Enabling Intelligent Data Downlink Prioritization of In-Situ Observations through Generalizable and Computationally Inexpensive Anomaly Detection

High-fidelity measurements of magnetic fields and other observed properties, such as energetic particle fluxes, are a necessary component to our understanding of the highly dynamic near-Earth space environment. As our desire to study smaller-scale phenomena such as shocks and dipolorizations has increased, we have been driven to take and telemeter measurements at higher cadences. Unfortunately, many missions are unable to downlink all their captured data due to the well-known data transmission bottleneck at the DSN. These missions must then prioritize their high-cadence data such that the most scientifically useful intervals are transmitted. One simple prioritization technique uses the spacecraft position to telemeter data from only the region of interest. Although easy to implement, this method does not leverage the available scientific data and can omit intervals of useful scientific data when they lie outside the region of interest. The Magnetospheric Multiscale Mission (MMS) uses mission-specific parameterization of several data products to automatically prioritize scientifically useful intervals. Then, MMS verifies the automatically selected intervals by having a domain expert manually select intervals for downlink. The overall complexity required by this technique make it prohibitive for deployment on low-cost platforms (i.e., CubeSats) or on future missions featuring large constellations of satellites such as the Geospace Dynamics Constellation (GDC). We present preliminary results for a simple, generic, and data-driven method of downlink prioritization for magnetic field (and other) measurements. Specifically, Principal Components Analysis (PCA) and One-Class Support Vector Machines (OC-SVMs) are used to detect intervals containing anomalous activity, which can then be prioritized for subsequent downlink. The computational simplicity of this algorithm makes it an excellent candidate for implementation on spaceflight hardware, as well as provide generalizability to a broad range of missions and data products. Initial analysis of this technique has been performed using magnetic field measurements from the Magnetospheric Multiscale Mission and CASSIOP, where it automatically identified scientifically interesting intervals containing Alfvén waves and EMIC activity.

Matthew G. Finley↗

NASA NTRS2012

Seasonal Variability of Saturn's Atmosphere

The seasonal variability of Saturn's clouds and weather layer, currently displaying a variety of phenomena (convective storms, planetary waves, giant storms and lightning-induced events, etc.) is not yet fully understood. Variations of Saturn's radiance at 5.2 microns, a spectral region dominated by thermal emission in an atmospheric window containing weak gaseous absorption, contain a strong axisymmetric component as well as large discrete features at low and mid-latitudes that are several degrees colder than the planetary average and uncorrelated with features at shorter wavelengths that are dominated by reflected sunlight (Yanamandra-Fisher et al., 2001. Icarus, Vol. 150). The characterization of several fundamental atmospheric properties and processes, however, remains incomplete, namely: How do seasons affect (a) the global distribution of gaseous constituents and aerosols; and (b) temperatures and the stability against convection and large scale-atmospheric transport? Do 5-micron clouds have counterparts at other altitude levels? What changes occur during the emergence of Great White Storms? Data acquired at the NASA/IRTF and NAOJ/Subaru from 1995 - 2011; since 2004, high-resolution multi-spectral and high-spatial imaging data acquired by the NASA/ESA Cassini mission, represents half a Saturnian year or two seasons. With the addition of detailed multi-spectral data sets acquired by amateur observers, we study these dramatic phenomena to better understand the timeline of the evolution of these events. Seasonal (or temporal) trends in the observables such as albedo of the clouds, thermal fields of the atmosphere as function of altitude, development of clouds, hazes and global abundances of various hydrocarbons in the atmosphere can now be modeled. We will present results of our ongoing investigation for the search and characterization of periodicities over half a Saturnian year, based on a non-biased a priori approach and time series techniques (such as Principal Component Analysis, PCA and Lomb-Scargle periodograms, LSP).

Yanamandra-Fisher, Padma A.↗