Search NASA⌕ Search

SEARCH · Search NASA

Results for “Procedure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Optimizing Procedures

Procedures designs are usually done in a well-lit, air conditioned, comfortable room under idealized assumptions. The reality of the operation is very different. For designers to be able to design procedures that work well under realistic dynamic work conditions, they must understand the reality of the operation and of the operators. The talk discusses the gap between the idealized design and the real operation and proposes a framework, THE Model, The 4Cs and the 4Ps, for designing procedures fit for real operations.

design↗

Interplanetary Terminal Procedure Design Applied to Lunar Landing

The impending NASA Artemis mission to the Moon will enable deep space exploration. The planned cadence of crewed Moon missions under Artemis necessitates scalable, safe lunar landings. This paper describes the development of Interplanetary Terminal Procedure Design (iTERP) which leverages current terminal procedure design criteria augmented with lunar physics to support the exploration of the Moon, Mars and beyond. The iTERPS model combines lessons learned from decades of commercial airspace operations with novelties of human space exploration on other worlds. This paper will highlight some of the key functional areas in procedure design safety, training, and operations reimagined for human space flight.

lunar approach procedures, Artemis Moon base, inte↗

Thinking About Procedures

Procedures and checklists form the backbone of all operations. But a given procedure does not exist in a vacuum. It is part of a large system, and it must fit well within it. For all procedures to fit well, we must take a comprehensive approach to their design. We present such an approach and the results we got when we applied it.

procedures↗

Development of Candidate Airspace Procedures for Urban Air Mobility in the Dallas Area

As the concept of on-demand electric air taxis gains popularity and begins to take shape, many research efforts are underway to address the challenges of integrating this new class of passenger-carrying air vehicles into the already congested U.S. National Airspace System. Through collaborations between the National Aeronautics and Space Administration (NASA), the Federal Aviation Administration, and industry, this concept, commonly referred to as Urban Air Mobility (UAM), envisions a safe, reliable, and efficient mode of transportation traversing metropolitan and urban areas. Among the many challenges being tackled, airspace procedures and information requirements are critical areas of research that need to be addressed. In a joint effort between NASA and Joby Aviation, a human-in-the-loop study was conducted at the NASA Ames Research Center to evaluate initial and midterm operations with air traffic controllers and on-board UAM pilots in the Dallas area. This area was chosen due to its complex Class Bravo Airspace that extends to the surface over a relatively large area. To achieve the goals and objectives of the study, multiple preceding efforts were conducted to develop the candidate procedures and information requirements. This paper provides an overview of the operational concept used for the study, the process that was followed, and the findings from the two tabletop meetings and a shakedown activity. The combination of these led to a set of airspace procedures, letters of agreement, and information requirements that were evaluated in the human-inthe-loop study.

Urban Air Mobility↗

Apollo Operations Handbook Lunar Module (LM 11 and Subsequent) Vol. 2 Operational Procedures

The Apollo Operations Handbook (AOH) is the primary means of documenting LM descriptions and procedures. The AOH is published in two separately bound volumes. This information is useful in support of program management, engineering, test, flight simulation, and real time flight support efforts. This volume contains crew operational procedures: normal, backup, abort, malfunction, and emergency. These procedures define the sequence of actions necessary for safe and efficient subsystem operation.

Source record↗

A finite element procedure for nonlinear prebuckling and initial postbuckling analysis

A procedure cast in a form appropriate to the finite element method is presented for geometrically nonlinear prebuckling and postbuckling structural analysis, including the identification of snap-through type of buckling. The principal features of this procedure are the use of direct iteration for solution of the nonlinear algebraic equations in the prebuckling range, an interpolation scheme for determination of the initial bifurcation point, a perturbation method in definition of the load-displacement behavior through the postbuckling regime, and extrapolation in determination of the limit point for snap-through buckling. Three numerical examples are presented in illustration of the procedure and in comparison with alternative approaches.

Mau, S. T.↗

Procedure for estimating stability and control parameters from flight test data by using maximum likelihood methods employing a real-time digital system

A maximum likelihood parameter estimation procedure and program were developed for the extraction of the stability and control derivatives of aircraft from flight test data. Nonlinear six-degree-of-freedom equations describing aircraft dynamics were used to derive sensitivity equations for quasilinearization. The maximum likelihood function with quasilinearization was used to derive the parameter change equations, the covariance matrices for the parameters and measurement noise, and the performance index function. The maximum likelihood estimator was mechanized into an iterative estimation procedure utilizing a real time digital computer and graphic display system. This program was developed for 8 measured state variables and 40 parameters. Test cases were conducted with simulated data for validation of the estimation procedure and program. The program was applied to a V/STOL tilt wing aircraft, a military fighter airplane, and a light single engine airplane. The particular nonlinear equations of motion, derivation of the sensitivity equations, addition of accelerations into the algorithm, operational features of the real time digital system, and test cases are described.

Grove, R. D.↗

Terminal-area flight procedures and route design for supersonic transport New York-transatlantic operations

The results of an analytical investigation of two departure and arrival transition procedures between John F. Kennedy International Airport and projected North Atlantic track systems for supersonic transport (SST) operations are presented. The procedures studied were: (1) separated departure and arrival transition routes with departures made at supersonic speeds, and (2) superimposed departure and arrival routes with departures restricted to subsonic speed until the airplane is on the track system. For both procedures, transition routes with intercept angles of 30 deg to 90 deg to both six-and four-track systems were investigated. Track spacings of 30 and 60 nautical miles were studied.

Sawyer, R. H.↗

Application of the QSDC procedure to the formulation of space shuttle design criteria. Volume 2: Applications guide

Criteria to determine the probability of aircraft structural failure were established according to the Quantitative Structural Design Criteria by Statistical Methods, the QSDC Procedure. This criteria method was applied to the design of the space shuttle during this contract. An Applications Guide was developed to demonstrate the utilization of the QSDC Procedure, with examples of the application to a hypothetical space shuttle illustrating the application to specific design problems. Discussions of the basic parameters of the QSDC Procedure: the Limit and Omega Conditions, and the strength scatter, have been included. Available data pertinent to the estimation of the strength scatter have also been included.

Bouton, I.↗

A design procedure and handling quality criteria for lateral directional flight control systems

A practical design procedure for aircraft augmentation systems is described based on quadratic optimal control technology and handling-quality-oriented cost functionals. The procedure is applied to the design of a lateral-directional control system for the F4C aircraft. The design criteria, design procedure, and final control system are validated with a program of formal pilot evaluation experiments.

Stein, G.↗

Flexible rotor balancing by the influence coefficient method. Part 1: Evaluation of the exact point-speed and least squares procedures

The practical aspects of balancing real, flexible rotors were investigated through inclusion of rotor out-of-roundness data at the measurement probe locations. The computer program was demonstrated to be fully capable of handling out-of-roundness data in the investigation. Testing was performed predominantly with a machine having a 41-inch long, 126-pound rotor. This rotor was operated over a speed range encompassing three rotor-bearing system critical speeds. Both balancing procedures were evaluated for several different conditions of initial rotor unbalance. Safe (and slow) passage through all the critical speeds was obtained after two or three balancing runs in most cases. The Least Squares procedure was found to be generally equivalent in capability to the Exact Point-Speed procedure for the configurations studies. (U)

Tessarzik, J. M.↗

A study of modal coupling procedures for the space shuttle

Various procedures for analytically coupling two or more substructures to obtain modal data for assembly, using data obtained from mode surveys of the individual components are discussed. Particular attention was paid to the applicability of the techniques investigated to the space shuttle, with the possible replacement of full scale mode surveys of the shuttle assembly by component mode surveys along with analytical coupling. The synthesis procedures formulated in this report can all handle redundant connections, although the presence of redundancies does add complication to one of the techniques. All of the procedures use the test data directly, without going through an intermediate analytical model, and no analytical stiffness data is required to supplement the mode survey data. The coupling precedures were initially verified and evaluated by applying them to analytical check problems.

Goldenberg, S.↗

A parametric study of planform and aeroelastic effects on aerodynamic center, alpha- and q- stability derivatives. Appendix D: Procedures used to determine the mass distribution for idealized low aspect ratio two spar fighter wings

The procedures used to establish the mass matrices characteristics for the fighter type wings studied are given. A description of the procedure used to find the mass associated with a specific aerodynamic panel is presented and some examples of the application of the procedure are included.

Roskam, J.↗

Classical eighth- and lower-order Runge-Kutta-Nystroem formulas with a new stepsize control procedure for special second-order differential equations

New Runge-Kutta-Nystrom formulas of the eighth, seventh, sixth, and fifth order are derived for the special second-order (vector) differential equation x = f (t,x). In contrast to Runge-Kutta-Nystrom formulas of an earlier NASA report, these formulas provide a stepsize control procedure based on the leading term of the local truncation error in x. This new procedure is more accurate than the earlier Runge-Kutta-Nystrom procedure (with stepsize control based on the leading term of the local truncation error in x) when integrating close to singularities. Two central orbits are presented as examples. For these orbits, the accuracy and speed of the formulas of this report are compared with those of Runge-Kutta-Nystrom and Runge-Kutta formulas of earlier NASA reports.

Fehlberg, E.↗

A study to determine the applicability of noise abatement approach procedures to McDonnell Douglas Aircraft

Analyses of McDonnell Douglas DC-8, DC-9, and DC-10 jet transports were conducted to investigate the applicability of two segment approach noise abatement procedures to these airplanes. All models had the required glide slope capability at the certified landing flap settings. The DC-8 models would probably be limited to an upper segment glide slope of 5.5 degrees and would probably not be suitable for the two segment procedure in icing conditions. The DC-8 would not be compatible with this procedure at a reduced landing flap setting. The feasibility of installing a two segment approach system in the Douglas-built fleet of commercial jet transports from a hardware viewpoint is discussed. The candidate system consists of a two segment computer plus the necessary peripheral equipment interfaced with the existing autopilot and associated avionics. The required modifications and additions to existing equipment are described and the attendant costs estimated. Potential problems which may be encountered are also discussed.

Painter, J. A.↗

A numerical procedure for the parametric optimization of three dimensional scramjet nozzles

A numerical procedure permitting the rapid determination of the internal performance of a class of scramjet nozzle configurations is presented. The approach developed is based on the construction of quasi two dimensional simple wave networks, where lateral expansion effects are incorporated by one dimensional approximations. A numerical procedure following this approach has has been developed and results obtained are highly comparable to those obtained employing a characteristic procedure. The numerical program developed permits the parametric variation of cowl length, turning angles on the cowl and vehicle undersurface and lateral expansion and is subject to fixed constraints such as the vehicle length and nozzle exit height. The program requires uniform initial conditions at the burner exit station and yields the location of all predominant wave zones, accounting for lateral expansion effects. In addition, the program yields the detailed pressure distribution on the cowl and vehicle undersurface and calculates the nozzle thrust, lift and pitching moment.

Dash, S.↗

Evaluation of computer-aided procedure for detecting surface water

Results from an evaluation of a computer-aided procedure for processing ERTS-1 data to detect and locate surface water are presented. The procedure was evaluated using data from a study area in the vicinity of the Lake Somerville area in Washington County, Texas. The procedure consisted of (1) selecting water training fields, (2) aggregating the training samples together and clustering them into unimodal clusters, (3) computing the mean vector and covariance matrix for each cluster, (4) classifying all of the study area into classes corresponding to the clusters using the maximum likelihood classifier, and (5) thresholding out the nonwater pixels.

Source record↗

A test procedure for determining the influence of stress ratio on fatigue crack growth

A test procedure is outlined by which the rate of fatigue crack growth over a range of stress ratios and stress intensities can be determined expeditiously using a small number of specimens. This procedure was developed to avoid or circumvent the effects of load interactions on fatigue crack growth, and was used to develop data on a mill annealed Ti-6Al-4V alloy plate. Experimental data suggest that the rates of fatigue crack growth among the various stress ratios may be correlated in terms of an effective stress intensity range at given values of K max. This procedure is not to be used, however, for determining the corrosion fatigue crack growth characteristics of alloys when nonsteady-state effects are significant.

Fitzgerald, J. H.↗