Results for “Process Engineering” — Page 11

NASA NTRS1981

The GA sulfur-iodine water-splitting process - A status report

The development of a sulfur-iodine thermal water splitting cycle is described. The process features a 50% thermal efficiency, plus all liquid and gas handling. Basic chemical investigations comprised the development of multitemperature and multistage sulfuric acid boost reactors, defining the phase behavior of the HI/I2/H2O/H3PO4 mixtures, and development of a decomposition process for hydrogen iodide in the liquid phase. Initial process engineering studies have led to a 47% efficiency, improvements of 2% projected, followed by coupling high-temperature solar concentrators to the splitting processes to reduce power requirements. Conceptual flowsheets developed from bench models are provided; materials investigations have concentrated on candidates which can withstand corrosive mixtures at temperatures up to 400 deg K, with Hastelloy C-276 exhibiting the best properties for containment and heat exchange to I2.

Besenbruch, G. E.↗

NASA NTRSDate not supplied

BERT-based Topic Modeling and Information Retrieval to Support Fishbone Diagramming for Safe Integration of Unmanned Aircraft Systems in Wildfire Response

Recent concepts for emerging wildfire response operations have included unmanned aircraft systems (UAS) due to their increasing accessibility and capabilities. To integrate UAS into wildfire response safely, researchers have studied the use of large repositories of historic incident reports to improve the scope of root cause analysis. Recent work has emphasized applying state-of-the-art natural language processing techniques to extract useful information from these repositories. However, it has not yet been studied how these results can be interpreted and integrated into the systems engineering process. In this work, we propose a process in which Bidirectional Encoder Representations from Transformers (BERT)-based topic modeling and information retrieval are applied to a relevant set of documents in order to support the development of a fishbone diagram in a semiautomated process. High-level themes in the document set are identified using topic modeling, which are then refined and interpreted by a human analyst. Then, the themes are used to guide a finer search using information retrieval, which returns specific incident reports of relevance. This provides traceability to specific incidents as well as broader categorizations that comprise the fishbone branches. We apply the proposed process to relevant documents from NASA’s Aviation Safety Reporting System (ASRS). The proposed process is widely applicable when relevant documents are available, and the results from this study will be useful to identifying potential causes of wildfire response UAS incidents.

hazard analysis↗

NASA NTRSDate not supplied

BERT-based Topic Modeling and Information Retrieval to Support Fishbone Diagramming for Safe Integration of Unmanned Aircraft Systems in Wildfire Response

Recent concepts for emerging wildfire response operations have included unmanned aircraft systems (UAS) due to their increasing accessibility and capabilities. To integrate UAS into wildfire response safely, researchers have studied the use of large repositories of historic incident reports to improve the scope of root cause analysis. Recent work has emphasized applying state-of-the-art natural language processing techniques to extract useful information from these repositories. However, it has not yet been studied how these results can be interpreted and integrated into the systems engineering process. In this work, we propose a process in which Bidirectional Encoder Representations from Transformers (BERT)-based topic modeling and information retrieval are applied to a relevant set of documents in order to support the development of a fishbone diagram in a semiautomated process. High-level themes in the document set are identified using topic modeling, which are then refined and interpreted by a human analyst. Then, the themes are used to guide a finer search using information retrieval, which returns specific incident reports of relevance. This provides traceability to specific incidents as well as broader categorizations that comprise the fishbone branches. We apply the proposed process to relevant documents from NASA’s Aviation Safety Reporting System (ASRS). The proposed process is widely applicable when relevant documents are available, and the results from this study will be useful to identifying potential causes of wildfire response UAS incidents.

hazard analysis↗

NASA NTRS2023

BERT-Based Topic Modeling and Information Retrieval to Support Fishbone Diagramming for Safe Integration of Unmanned Aircraft Systems in Wildfire Response

Recent concepts for emerging wildfire response operations have included unmanned aircraft systems (UAS) due to their increasing accessibility and capabilities. To integrate UAS into wildfire response safely, researchers have studied the use of large repositories of historic incident reports to improve the scope of root cause analysis. Recent work has emphasized applying state-of-the-art natural language processing techniques to extract useful information from these repositories. However, it has not yet been studied how these results can be interpreted and integrated into the systems engineering process. In this work, we propose a process in which Bidirectional Encoder Representations from Transformers (BERT)-based topic modeling and information retrieval are applied to a relevant set of documents in order to support the development of a fishbone diagram in a semiautomated process. High-level themes in the document set are identified using topic modeling, which are then refined and interpreted by a human analyst. Then, the themes are used to guide a finer search using information retrieval, which returns specific incident reports of relevance. This provides traceability to specific incidents as well as broader categorizations that comprise the fishbone branches. We apply the proposed process to relevant documents from NASA’s Aviation Safety Reporting System (ASRS). The proposed process is widely applicable when relevant documents are available, and the results from this study will be useful to identifying potential causes of wildfire response UAS incidents.

Hazard analysis↗

NASA NTRS1992

Aircraft Engine-Monitoring System And Display

Proposed Engine Health Monitoring System and Display (EHMSD) provides enhanced means for pilot to control and monitor performances of engines. Processes raw sensor data into information meaningful to pilot. Provides graphical information about performance capabilities, current performance, and operational conditions in components or subsystems of engines. Provides means to control engine thrust directly and innovative means to monitor performance of engine system rapidly and reliably. Features reduce pilot workload and increase operational safety.

Abbott, Terence S.↗

NASA NTRS2000

Global Design Optimization for Aerodynamics and Rocket Propulsion Components

Modern computational and experimental tools for aerodynamics and propulsion applications have matured to a stage where they can provide substantial insight into engineering processes involving fluid flows, and can be fruitfully utilized to help improve the design of practical devices. In particular, rapid and continuous development in aerospace engineering demands that new design concepts be regularly proposed to meet goals for increased performance, robustness and safety while concurrently decreasing cost. To date, the majority of the effort in design optimization of fluid dynamics has relied on gradient-based search algorithms. Global optimization methods can utilize the information collected from various sources and by different tools. These methods offer multi-criterion optimization, handle the existence of multiple design points and trade-offs via insight into the entire design space, can easily perform tasks in parallel, and are often effective in filtering the noise intrinsic to numerical and experimental data. However, a successful application of the global optimization method needs to address issues related to data requirements with an increase in the number of design variables, and methods for predicting the model performance. In this article, we review recent progress made in establishing suitable global optimization techniques employing neural network and polynomial-based response surface methodologies. Issues addressed include techniques for construction of the response surface, design of experiment techniques for supplying information in an economical manner, optimization procedures and multi-level techniques, and assessment of relative performance between polynomials and neural networks. Examples drawn from wing aerodynamics, turbulent diffuser flows, gas-gas injectors, and supersonic turbines are employed to help demonstrate the issues involved in an engineering design context. Both the usefulness of the existing knowledge to aid current design practices and the need for future research are identified.

Shyy, Wei↗

NASA NTRS1936

Ignition process in Diesel engines

This report analyzes the heating and vaporization process of fuel droplets in a compression-ignition engine on the basis of the theory of similitude - according to which, the period for heating and complete vaporization of the average size fuel drop is only a fraction of the actually observed ignition lag. The result is that ignition takes place in the fuel vapor air mixture rather than on the surface of the drop. The theoretical result is in accord with the experimental observations by Rothrock and Waldron. The combustion shock occurring at lower terminal compression temperature, especially in the combustion of coal-tar oil, is attributable to a simultaneous igniting of a larger fuel-vapor volume formed prior to ignition.

Wentzel, W↗

NASA NTRS2016

Functional Fault Model Development Process to Support Design Analysis and Operational Assessment

A functional fault model (FFM) is an abstract representation of the failure space of a given system. As such, it simulates the propagation of failure effects along paths between the origin of the system failure modes and points within the system capable of observing the failure effects. As a result, FFMs may be used to diagnose the presence of failures in the modeled system. FFMs necessarily contain a significant amount of information about the design, operations, and failure modes and effects. One of the important benefits of FFMs is that they may be qualitative, rather than quantitative and, as a result, may be implemented early in the design process when there is more potential to positively impact the system design. FFMs may therefore be developed and matured throughout the monitored system's design process and may subsequently be used to provide real-time diagnostic assessments that support system operations. This paper provides an overview of a generalized NASA process that is being used to develop and apply FFMs. FFM technology has been evolving for more than 25 years. The FFM development process presented in this paper was refined during NASA's Ares I, Space Launch System, and Ground Systems Development and Operations programs (i.e., from about 2007 to the present). Process refinement took place as new modeling, analysis, and verification tools were created to enhance FFM capabilities. In this paper, standard elements of a model development process (i.e., knowledge acquisition, conceptual design, implementation & verification, and application) are described within the context of FFMs. Further, newer tools and analytical capabilities that may benefit the broader systems engineering process are identified and briefly described. The discussion is intended as a high-level guide for future FFM modelers.

Verification↗

NASA NTRS1989

QATT: a Natural Language Interface for QPE

QATT, a natural language interface developed for the Qualitative Process Engine (QPE) system is presented. The major goal was to evaluate the use of a preexisting natural language understanding system designed to be tailored for query processing in multiple domains of application. The other goal of QATT is to provide a comfortable environment in which to query envisionments in order to gain insight into the qualitative behavior of physical systems. It is shown that the use of the preexisting system made possible the development of a reasonably useful interface in a few months.

White, Douglas Robert-Graham↗

NASA NTRS2000

Applying Technology Ranking and Systems Engineering in Advanced Life Support

According to the Advanced Life Support (ALS) Program Plan, the Systems Modeling and Analysis Project (SMAP) has two important tasks: 1) prioritizing investments in ALS Research and Technology Development (R&TD), and 2) guiding the evolution of ALS systems. Investments could be prioritized simply by independently ranking different technologies, but we should also consider a technology's impact on system design. Guiding future ALS systems will require SMAP to consider many aspects of systems engineering. R&TD investments can be prioritized using familiar methods for ranking technology. The first step is gathering data on technology performance, safety, readiness level, and cost. Then the technologies are ranked using metrics or by decision analysis using net present economic value. The R&TD portfolio can be optimized to provide the maximum expected payoff in the face of uncertain future events. But more is needed. The optimum ALS system can not be designed simply by selecting the best technology for each predefined subsystem. Incorporating a new technology, such as food plants, can change the specifications of other subsystems, such as air regeneration. Systems must be designed top-down starting from system objectives, not bottom-up from selected technologies. The familiar top-down systems engineering process includes defining mission objectives, mission design, system specification, technology analysis, preliminary design, and detail design. Technology selection is only one part of systems analysis and engineering, and it is strongly related to the subsystem definitions. ALS systems should be designed using top-down systems engineering. R&TD technology selection should consider how the technology affects ALS system design. Technology ranking is useful but it is only a small part of systems engineering.

Jones, Harry↗

NASA NTRS2005

Systems Engineering and Integration for Advanced Life Support System and HST

Systems engineering (SE) discipline has revolutionized the way engineers and managers think about solving issues related to design of complex systems: With continued development of state-of-the-art technologies, systems are becoming more complex and therefore, a systematic approach is essential to control and manage their integrated design and development. This complexity is driven from integration issues. In this case, subsystems must interact with one another in order to achieve integration objectives, and also achieve the overall system's required performance. Systems engineering process addresses these issues at multiple levels. It is a technology and management process dedicated to controlling all aspects of system life cycle to assure integration at all levels. The Advanced Integration Matrix (AIM) project serves as the systems engineering and integration function for the Human Support Technology (HST) program. AIM provides means for integrated test facilities and personnel for performance trade studies, analyses, integrated models, test results, and validated requirements of the integration of HST. The goal of AIM is to address systems-level integration issues for exploration missions. It will use an incremental systems integration approach to yield technologies, baselines for further development, and possible breakthrough concepts in the areas of technological and organizational interfaces, total information flow, system wide controls, technical synergism, mission operations protocols and procedures, and human-machine interfaces.

Kamarani, Ali K.↗

NASA NTRS2016

Functional Fault Model Development Process to Support Design Analysis and Operational Assessment

A functional fault model (FFM) is an abstract representation of the failure space of a givensystem. As such, it simulates the propagation of failure effects along paths between the origin ofthe system failure modes and points within the system capable of observing the failure effects. Asa result, FFMs may be used to diagnose the presence of failures in the modeled system. FFMsnecessarily contain a significant amount of information about the design, operations, and failuremodes and effects. One of the important benefits of FFMs is that they may be qualitative, ratherthan quantitative and, as a result, may be implemented early in the design process when there ismore potential to positively impact the system design. FFMs may therefore be developed andmatured throughout the monitored system's design process and may subsequently be used toprovide real-time diagnostic assessments that support system operations. This paper provides anoverview of a generalized NASA process that is being used to develop and apply FFMs. FFMtechnology has been evolving for more than 25 years. The FFM development process presented inthis paper was refined during NASA's Ares I, Space Launch System, and Ground SystemsDevelopment and Operations programs (i.e., from about 2007 to the present). Process refinementtook place as new modeling, analysis, and verification tools were created to enhance FFMcapabilities. In this paper, standard elements of a model development process (i.e., knowledgeacquisition, conceptual design, implementation & verification, and application) are describedwithin the context of FFMs. Further, newer tools and analytical capabilities that may benefit thebroader systems engineering process are identified and briefly described. The discussion isintended as a high-level guide for future FFM modelers.

Melcher, Kevin J.↗

NASA NTRS1965

Langley Management of a NASA Reliability and Quality Assurance Program

NASA reliability and quality control program for failure elimination by contractors in all phases of engineering, processing, inspection, packaging, storage, and flight operations

CONTRACTOR↗

NASA NTRS1997

Interactive Media and Simulation Tools for Technical Training

Over the last several years, integration of multiple media sources into a single information system has been rapidly developing. It has been found that when sound, graphics, text, animations, and simulations are skillfully integrated, the sum of the parts exceeds the individual parts for effective learning. In addition, simulations can be used to design and understand complex engineering processes. With the recent introduction of many high-level authoring, animation, modeling, and rendering programs for personal computers, significant multimedia programs can be developed by practicing engineers, scientists and even managers for both training and education. However, even with these new tools, a considerable amount of time is required to produce an interactive multimedia program. The development of both CD-ROM and Web-based programs are discussed in addition to the use of technically oriented animations. Also examined are various multimedia development tools and how they are used to develop effective engineering education courseware. Demonstrations of actual programs in engineering mechanics are shown.

Gramoll, Kurt↗

NASA NTRS2013

SpaceCube Version 1.5

SpaceCube 1.5 is a high-performance and low-power system in a compact form factor. It is a hybrid processing system consisting of CPU (central processing unit), FPGA (field-programmable gate array), and DSP (digital signal processor) processing elements. The primary processing engine is the Virtex- 5 FX100T FPGA, which has two embedded processors. The SpaceCube 1.5 System was a bridge to the SpaceCube 2.0 and SpaceCube 2.0 Mini processing systems. The SpaceCube 1.5 system was the primary avionics in the successful SMART (Small Rocket/Spacecraft Technology) Sounding Rocket mission that was launched in the summer of 2011. For SMART and similar missions, an avionics processor is required that is reconfigurable, has high processing capability, has multi-gigabit interfaces, is low power, and comes in a rugged/compact form factor. The original SpaceCube 1.0 met a number of the criteria, but did not possess the multi-gigabit interfaces that were required and is a higher-cost system. The SpaceCube 1.5 was designed with those mission requirements in mind. The SpaceCube 1.5 features one Xilinx Virtex-5 FX100T FPGA and has excellent size, weight, and power characteristics [4×4×3 in. (approx. = 10×10×8 cm), 3 lb (approx. = 1.4 kg), and 5 to 15 W depending on the application]. The estimated computing power of the two PowerPC 440s in the Virtex-5 FPGA is 1100 DMIPS each. The SpaceCube 1.5 includes two Gigabit Ethernet (1 Gbps) interfaces as well as two SATA-I/II interfaces (1.5 to 3.0 Gbps) for recording to data drives. The SpaceCube 1.5 also features DDR2 SDRAM (double data rate synchronous dynamic random access memory); 4- Gbit Flash for storing application code for the CPU, FPGA, and DSP processing elements; and a Xilinx Platform Flash XL to store FPGA configuration files or application code. The system also incorporates a 12 bit analog to digital converter with the ability to read 32 discrete analog sensor inputs. The SpaceCube 1.5 design also has a built-in accelerometer. In addition, the system has 12 receive and transmit RS- 422 interfaces for legacy support. The SpaceCube 1.5 processor card represents the first NASA Goddard design in a compact form factor featuring the Xilinx Virtex- 5. The SpaceCube 1.5 incorporates backward compatibility with the Space- Cube 1.0 form factor and stackable architecture. It also makes use of low-cost commercial parts, but is designed for operation in harsh environments.

Geist, Alessandro↗

NASA NTRSDate not supplied

Defining A Modelling Language to Support Functional Hazard Assessment

Functional Hazard Assessment (FHA) is a key early-stage engineering process that supports the incorporation of safety in design by identifying the high-level functional hazards the system may encounter. While many FHA-like methodologies have been proposed in the design engineering literature, many of these methodologies have had difficulty becoming accepted industry practice. Industry standards, on the other hand, either provide too little recommendation on how to represent the function of the system to perform FHA, or rely on existing design artefacts which insufficiently support the goals of the process. This paper presents some of the problems with current modeling languages (both proposed and used) for FHA which limit the scope, expressiveness, flexibility, and precision of the analysis. It then outlines desirable principles an FHA-supporting analysis language should embody, and introduces the Functional Reasoning Design Language (FRDL), a formal modeling language for describing the functional elements of a system and their interactions, which aims to satisfy these principles. To demonstrate the use of this language, the modeling and hazard analysis of a disaster response drone is presented. While this case study is limited in scope, it highlights how FRDL can represent system function while reducing the ambiguity present in typical FHA-supporting functional modeling languages

Hazard Assessment↗

NASA NTRS2005

Software Risk Identification for Interplanetary Probes

The need for a systematic and effective software risk identification methodology is critical for interplanetary probes that are using increasingly complex and critical software. Several probe failures are examined that suggest more attention and resources need to be dedicated to identifying software risks. The direct causes of these failures can often be traced to systemic problems in all phases of the software engineering process. These failures have lead to the development of a practical methodology to identify risks for interplanetary probes. The proposed methodology is based upon the tailoring of the Software Engineering Institute's (SEI) method of taxonomy-based risk identification. The use of this methodology will ensure a more consistent and complete identification of software risks in these probes.

Dougherty, Robert J.↗

NASA NTRS1985

Adhesives for Aerospace

The industry is hereby challenged to integrate adhesive technology with the total structure requirements in light of today's drive into automation/mechanization. The state of the art of adhesive technology is fairly well meeting the needs of the structural designers, the processing engineer, and the inspector, each on an individual basis. The total integration of these needs into the factory of the future is the next collective hurdle to be achieved. Improved processing parameters to fit the needs of automation/mechanization will necessitate some changes in the adhesive forms, formulations, and chemistries. Adhesives have, for the most part, kept up with the needs of the aerospace industry, normally leading the rest of the industry in developments. The wants of the aerospace industry still present a challenge to encompass all elements, achieving a totally integrated joined and sealed structural system. Better toughness with hot-wet strength improvements is desired. Lower cure temperatures, longer out times, and improved corrosion inhibition are desired.

Meade, L. E.↗