Search NASA⌕ Search

SEARCH · Search NASA

Results for “Production rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

On the CO and N2 abundance in Comet Halley

The mass 28 amu/e signal observed in the neutral mode of the Giotto neutral gas mass spectrometer (NMS) is evaluated. At 1000 km from the nucleus number density n(CO)/ n(H2O) is less than or = 0.07. The production rate of CO as a parent molecule directly from the nucleus is thus less than 7% of the H2O production rate. However, CO is also produced from an extended source in the inner coma (r is less than 20,000 km) and at 20,000 km from the nucleus, for the total equivalent CO production rate 0.05 is less than or = Q(CO)/Q(H2O) is less than or = 0.15. For N2 an upper limit Q(N2)/Q(H2O) is less than or = 0.1 is derived. No parent molecule for the CO is identified in agreement with the NMS measurements. It is proposed that CO or a very short-lived parent is released in the coma from cometary dust grains, such as the CHON particles.

Eberhardt, P.↗
NASA NTRS1992

An infrared search for formaldehyde in several comets

Models which assume either a parent or a distributed source for H2CO are presently used to retrieve 3-sigma upper limits to that species' production rate from a 3.55-3.64 micron search for cometary IR emission from the nu1 and nu5 bands of formaldehyde. A parent-source H2CO production rate relative to water of 0.15-0.80 percent is obtained, together with a distributed source production rate of 1.7-5.8 percent.

Reuter, Dennis C.↗
NASA NTRS1986

OH radio observations of Comet Halley

Results of OH observations of P/Halley obtained with the NRAO 43 m antenna between July 1985 and May 1986 are presented. Using Radio Model 1986a, the OH production rate derived from these data follows an rh(-2) law for heliocentric distances in the range 0.6 to 2.1 AU. Comparison of radio OH production rates to those estimated by UV techniques continues to show that the radio technique finds systematically lower production rates. Observations of the OH line shape show that the line width increases as the comet approaches perihelion, and that the broader line widths persist after perihelion out to at least rh = 1AU. Modeling of the profiles suggest that this may be accounted for through an increase in the velocity of the OH parent. The mean velocity of the OH emission (after correction for the OH Greenstein effect) is slightly blue shifted compared to the nucleus velocity and suggests that the outgassing from the nucleus is largely directed sunward.

Schloerb, F. Peter↗
NASA NTRS1994

Variability in Comet P/Swift-Tuttle

Spatial profiles of the coma of Comet P/Swift-Tuttle perpendicular to the projected Sun-comet line were obtained for the emission bands of CN, C2, and C3 as well as for two continuum bands from spectrophotometric observations taken from Oct. 5 to 8, 1992. The intensities were converted into emissivities per sq km in the cases of the continua and into column densities for the emission band profiles. Spatial and temporal variabilities have been found in all five investigated components, which are consistent with the rotational period of the nucleus determined from the observations of the comet during its last perihelion passage in 1862. The emission band profiles were fitted with the vectorial model and the production rates of CN, C2, and C3 were determined. One half of the profiles was fitted adequately under steady state conditions for the production rate in a first approximation, whereas the other half showed prominent bumps, which could only be explained by introducing a time-dependent production rate. Further investigations showed evidence for the presence of gaseous as well as dust jets in the coma, which indicated the presence of at least two active areas on the surface of the nucleus. The projected radial expansion velocities of two different features were determined to be (430 +/- 100) and (460 +/- 100) m/sec, respectively.

Schulz, Rita↗
DOE OSTI2022

Evaluation of cosmogenic production of 39 Ar and 42 Ar for rare-event physics using underground argon

Underground argon (UAr) with lower cosmogenic activities of 39 Ar and 42 Ar has been planned as a detector in detecting scintillation light and charge collection using time projection chambers for dark matter searches and as a veto detector in suppressing backgrounds for neutrinoless double beta decay (0$vββ$ ) experiments. Long-lived radioactive isotopes, 39 Ar and 42 Ar, can also be produced on the surface when UAr is pumped out from a deep well. Understanding the production of long-lived isotopes in Ar is important for utilizing UAr for dark matter and 0$vββ$ experiments in terms of its production, transportation, and storage. Ar exposure to cosmic rays at sea-level is simulated using Geant4 for a given cosmic ray muon, neutron, and proton energy spectrum. Here we report the simulated cosmogenic production rates of 39 Ar, 42 Ar, and other long-lived isotopes at sea-level from fast neutrons, high energy muons, and high energy protons. Total production rates of 938.53/kg Ar day and 5.81 × 10 -3 /kg Ar day for 39 Ar and 42 Ar are found from our simulation. Utilizing these production rates, we set a time limit of 954 days constrained by the production of 39 Ar for UAr to be on the surface before it compromises the sensitivity for a dark matter experiment. Similarly, a time limit of 1702 days constrained by the production of 42 Ar is found for a 0$vββ$ experiment.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Refinery gas processing method

A process for hydrogen recovery from refinery gas system comprising supplying the refinery gas to an inlet manifold fluidly coupled to a conditioning stage, the conditioning stage comprising a reactor having a reforming catalyst deposited on an ultra-short-channel-length metal substrate; supplying oxidant to the conditioning stage via the inlet manifold; supplying steam from a steam generator to the conditioning stage via the inlet , manifold; reacting the refinery gas in the conditioning stage; and discharging a product through a discharge outlet fluidly coupled to the conditioning stage, the discharge outlet configured to flow the product for use by a downstream reformer. The process allows to either increase the H2 production rate or lower the firing rate while maintaining a constant H2 production rate for the downstream steam reformer, independent of the feed compositional variability of the refinery or still gas.

Vilekar, Saurabh↗
DOE OSTI2025

Enhancement of oxidative dehydrogenation over cerium-doped nickel niobium catalysts and analysis of batch-to-batch variability

Nickel based catalysts are inexpensive and efficient for use in the oxidative dehydrogenation of ethane. NiO doped with niobium and cerium shows increased ethylene production. Small amounts of Ce doped onto a NiNb catalyst led to increased Ni activity. The catalyst that had the highest ethylene production rate per g of catalyst had 1 atom% Ce, 86 at% Ni, and 13 at% Nb (1CeNiNb) while, if surface area is incorporated into the calculation, the catalyst that had the highest ethylene production rate per m 2 was the 0.5CeNiNb catalyst. The ethylene production rates of these Ce-containing catalysts are 27 %-127 % higher than those with NiNb alone previously reported in the literature. Here, to fully understand how cerium affects the NiNb catalyst, the Ce content and effect on active sites has been fully characterized over multiple batches. In doing this, light has been shed on batch-to-batch variability. Characterization techniques such as powder X-ray diffraction, hydrogen temperature programmed reduction, X-ray photoelectron spectroscopy, synchrotron X-ray absorption spectroscopy, and methanol adsorption were used.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2016

Shrink Tape Technique for Heat Forming Aluminum Substrates for Thin Foil X-Ray Mirrors and the Neutron Star Interior Composition Explorer X-Ray Concentrators

Consistent improvements in the design and fabrication of thin-foil, epoxy-replicated x-ray mirrors for astronomical telescopes have yielded increasingly higher quality and more precise astrophysical data. The Neutron Star Interior Composition Explorer (NICER) x-ray timing mission optics continues this tradition and introduces design elements that promise even more accurate measurements and precise astrophysical parameters. The singly reflecting concentrators have a curved axial profile to improve photon concentration and a sturdy full shell structure for enhanced module stability. These design elements introduced the challenge of reliably forming mirror substrates at an acceptable production rate. By developing a technique using heat shrink tape to compress and conform thin aluminum mirror substrates to shaping mandrels, production rate improved with successful fabrication. The technique's efficiency was analyzed by measuring hundreds of substrate profiles postforming, performance testing completely assembled concentrators composed of every size substrate, and comparing the results to simulated fabrication scenarios. On average, the profiles were copied within 4.6 plus or minus 3.7 percent. These measurements and the overall success of NICER's optics, via ground calibration, have shown that the heat-shrink tape method is reliable, repeatable, and could be used in future missions to increase production rate and improve performance.

Balsamo, Erin↗
DOE OSTI2026

Impact of Site Identity, Location, and Accessibility on Polyethylene Conversion Rates and Product Selectivities over Metal-Free MFI Zeolites

Brønsted (BAS), Lewis (LAS), and surface Brønsted (SBAS) acid sites have been investigated for polyethylene (PE) upcycling by zeolite catalysts, but there is no clear consensus regarding their catalytic roles, partly due to the complexity of the catalysts used and varying reaction conditions across studies. This work systematically determined how these sites impact PE conversion rates and product distributions by utilizing a suite of microporous MFI catalysts with varying Si/Al ratios, acid site densities, and inherent mesoporosities. PE conversion rates did not trend with total BAS or LAS densities due to a combination of internal mass transfer limitation and the apparent inability of LAS alone to cleave C–C bonds, but a strong, statistically significant correlation was present with respect to SBAS density and mesopore surface area, jointly, owing to accelerated polymer activation on external surfaces to smaller diffusion-limited chains. However, ingress of these SBAS-derived fragments ultimately remained rate limiting, as demonstrated by solid conversion rates that increased with mesopore surface area at similar SBAS density and likewise increased with SBAS density at similar mesopore surface area. In batch PE cracking reactions, light gaseous product selectivities were most sensitive to total BAS, with higher densities generally exhibiting higher selectivity to C 3 and linear C 4 –C 7 products and higher alkane/alkene product ratios, consistent with increased β-scission turnovers. Insights from this work help systematically clarify the roles of BAS, LAS, SBAS, and mesopores in PE cracking reactions and inform the development of tailored zeolite catalysts for efficient polyolefin upcycling.

accessibility↗
NASA NTRS1993

The flow of the contaminated solar wind at comet P/Grigg-Skjellerup

On July 10, 1992, the Giotto spacecraft encountered a second comet, namely, P/Grigg-Skjellerup. Despite the small production rate of this comet (approximately 2 orders of magnitude smaller than that of P/Halley and 1 order of magnitude smaller than that of P/Giacobini-Zinner) the plasma flow showed several distinct flow transitions. We have applied theoretical models, previously developed to explain the existence and location of the flow boundaries at comets P/Giacobini-Zinner and P/Halley to this new data set for comet P/Grigg-Skjellerup. The observed bow shock crossings are used to evaluate the production rate of the cometary neutrals. Using this production rate, the position of the collisionopause and the ionopause are estimated. The observed location of the magnetic pile-up boundary corresponds well to the theoretical calculations. We also find the reason that a magnetic field-free region was not encountered was because the ionopause, while being sharp, was inside the spacecraft trajectory which had an estimated closest approach distance greater than 120 km. Finally we have used the observed spatial profile of the solar wind magnetic field together with a simple one-dimemsional, multispecies chemical model to calculate the radial density profiles of the H2O group ions outside the bow shock. Comparsion of the calculated total H2O group ion density profile with observations indicates a good fit in the inner region where the H2O ion dominates. While the corresponding fit in the outer region, where the O(+) ion dominates, becomes progressively less satisfactory with increasing cometocentric distance, it is noted that the observations themselves are believed to be less reliable at theses large distances.

Flammer, K. R.↗
NASA NTRS1991

The P/Halley: Spatial distribution and scale lengths for C2, CN, NH2, and H2O

From P/Halley long slit spectroscopic exposures on 12 dates, extending from Oct. 1985 to May 1986, spatial profiles were obtained for emissions by C2, CN, NH2, and OI(1D). Haser model scale lengths were fitted to these data. The extended time coverage allowed the checking for consistency between the various dates. The time varying production rate of P/Halley severely affected the profiles after perihelion, which is shown in two profile sequences on adjacent dates. Because of the time varying production rate, it was not possible to obtain reliable Haser model scale lengths after perihelion. The pre-perihelion analysis yielded Haser model scale lengths of sufficient consistency that they can be used for production rate determinations, whenever it is necessary to extrapolate from observed column densities within finite observing apertures. Results of scale lengths reduced to 1 AU are given and discussed.

Fink, Uwe↗
NASA NTRS2001

Large-Aperture [O I] 6300 A Photometry of Comet Hale-Bopp: Implications for the Photochemistry of OH

Large-aperture photometric observations of comet Hale-Bopp (C/1995 O1) in the forbidden red line of neutral oxygen ([O I] 6300 angstroms) with the 150 mm dual-etalon Fabry-Perot spectrometer that comprises the Wisconsin H-alpha Mapper and a 50 mm dual-etalon Fabry-Perot spectrometer at the McMath-Pierce main telescope from 1997 late February to mid April yield a total metastable O((sup 1)D) production rate of (2.3-5.9) x 10(exp 30)/s. Applying the standard H2O and OH photodissociation branching ratios, we derive a water production rate, Q(H2O), of (2.6-6.1) x 10(exp 31)/s, which disagrees with Q(H2O = 1x10(exp 31)/s determined by independent H2O, OH, and H measurements. Furthermore, our own [O I] 6300 observations of the inner coma (< 30,000 km) using the 3.5 m Wisconsin-Indiana-Yale-NOAO telescope Hydra and Densepak multi-object spectrographs yield Q(H2O) = 1 x 10(exp 31)/s. Using our [O I] 6300 data, which cover spatial scales ranging from 2,000 to 1x10(exp 6) km, and a complementary set of wide-field ground-based OH images, we can constrain the sources of the apparent excess O((sup 1)D) emission to the outer coma, where photodissociation of OH is assumed to be the dominant O((sup 1)D) production mechanism. From production rates of other oxygen-bearing volatiles (e.g., CO and CO2), we can account for at most 30% of the observed excess O((sup 1)D) emission. Since even less O((sup 1)D) should be coming from other sources (e.g., electron excitation of neutral O and distributed nonnuclear sources of H2O), we hypothesize that the bulk of the excess O((sup 1)D) is likely coming from photodissociating OH. Using the experimental OH photo-dissociation cross section of Nee and Lee at Ly-alpha as a guide in modifying the theoretical OH cross sections of van Dishoeck and Dalgarno, we can account for approximately 60% of the observed O((sup 1)D) excess without requiring major modifications to the other OH branching ratios or the total OH photodissociation lifetime.

Morgenthaler, Jeffrey P.↗
NASA NTRS1980

Cosmic ray exposure ages of chondrites, pre-irradiation and constancy of cosmic ray flux in the past

Calibration of the production rate of the Ne-21 nuclide was accomplished by 4 methods based on (Al-26)-age, (Mn-53)-age, Kr-81/Kr-83, and Na-22/Ne-22. These production rates are normalized to a shielding parameter ratio Ne-22/Ne-21 = 1.11 and to the chemical composition of L chondrites; a value of P(21)(1.11) = 0.31 is suggested, and a production rate equation derived in terms of the 'F' parameters for L, LL, and H chondrites. The Al-26 half-life measurements are considered to evaluate the effects resulting from preirradiation of meteorites and to examine the data on the constancy of the cosmic ray flux in the light of current astronomical observations.

Nishizumi, K.↗
NASA NTRS1987

Ultraviolet spectrophotometry of Comet Giacobini-Zinner during the ICE encounter

The IUE's UV spectrophotometer was used to monitor Comet Giacobini-Zinner's H2O production rate from June to October, 1985, in support of the International Cometary Explorer (ICE) mission. Observation results for the spatial and temporal variation and the abundance or upper limits of C, CO, CO(+), CO2(+), CS, H, Mg(+), O, OH, and S, between September 9 and 12, included the time of the ICE encounter: at this time, the H2O production rate obtained was consistent with a number of gas production rates derived indirectly from the ICE experiments. A comparison of the CO2(+) ion abundance with the total electron density measured by the plasma electron and radio science experiments on ICE implies an ion deficiency relative to electrons, so that the satisfaction of charge balance criteria requires the presence of a major ion population not detected by remote sensing.

Mcfadden, Lucy A.↗
NASA NTRS2016

Far-Ultraviolet Observations of Comet C 2012 S1 (ISON) From Fortis

We have used the unique far-UV imaging capability offered by a sounding-rocket-borne instrument to acquire observations of C/2012 S1 (ISON) when its angular separation with respect to the Sun was 26 deg.3 on 2013 November 20.49. At the time of observation, the comet's heliocentric distance and velocity relative to the Sun were r h = 0.43 au and r (sub h) = 62.7 km s)exp. -1). Images dominated by C Iota Lambda 1657 and H Iota Lambda 1216 were acquired over a 10(exp. 6) x 10(exp. 6) km(exp. 2) region. The water production rate implied by the Ly Alpha observations is constrained to be Q H2O is much greater than 8 x 10(exp. 29) s(exp. -1) while the neutral carbon production rate was Q(sub c) is much greater than 4 x 10(exp. 28) s(exp. -1). The radial profile of C I was consistent with it being a dissociation product of a parent molecule with a lifetime T is approx. 5 x 10(exp. 4) s, favoring a parent other than CO. We constrain the Q(sub co) production rate to 5(+1.5)(-7.5), 10(exp. 28) s(exp. -1) with 1 sigma errors derived from photon statistics. The upper limit on the Q (sub CO)/Q(sub H2O) is 6%.

sounding rocket↗
NASA NTRS1989

On the identification of formaldehyde in Halley's comet

The v1 and v5 infrared bands of formaldehyde in Halley's comet have been synthesized, using a line-by-line model for solar infrared fluorescence from low-temperature H2CO. Fully resolved spectra were convolved to spectral resolutions comparable with those used on the IKS spectrometer on the Vega 1 spacecraft. Excellent agreement is obtained between the observed and modeled spectra, permitting a definite identification of H2CO in Halley's comet. The retrieved production rate is 4.5 + or - 0.5 x 10 to the 28th molecules/s, and the rotational temperature is probably less than 150 K, with a best-fit value of about 50 K. Production rates (or upper limits) are also retrieved from ground-based spectra of Comets Halley and Wilson (1986), and it is shown that the production rate of H2CO exhibits significant temporal variability, relative to H2O, in Comet Halley.

Mumma, Michael J.↗
NASA NTRS1986

Cosmogenic neutron-capture-produced nuclides in stony meteorites

The complete neutron-flux results and production rates for Cl-36, Ni-59, and Co-60 in stony meteorites of various radii and composition are presented. The relative neutron source strengths and neutron production-versus-depth profiles were determined by using calculated H-3 production rates. The absolute source strengths were normalized to that determined for the moon by Woolum et al. (1975). The energy spectrum of the source neutrons and the neutron transport calculations, which employed the ANISN computer code, were similar to those used for the moon by Lingenfelter et al. (1972). The production rates of the three radionuclides were determined as a function of depth in various spherical meteoroids from the calculated equilibrium neutron-flux distributions and from energy-dependent neutron-capture cross sections. Rates for producing these radionuclides by spallation reactions were also calculated.

Spergel, M. S.↗
NASA NTRS2018

Evolution of H2O Production in Comet C/2012 S1 (ISON) as Inferred from Forbidden Oxygen and OH Emission

We present H2O production rates for comet C/2012 S1 (ISON) derived from observations of [O I] and OH emission during its inbound leg, covering a heliocentric distance range of 1.8–0.44 AU. Our production rates are in agreement with previous measurements using a variety of instruments and techniques and with data from the various observatories greatly differing in their projected fields of view. The consistent results across all data suggest the absence of an extended source of H2O production, for example sublimation of icy grains in the coma, or a source with spatial extent confined to the dimensions of the smallest projected field of view (in this case < 1000 km). We find that ISON had an active area of around 10 sq km for heliocentric distances Rh > 1.2 AU, which then decreased to about half this value from Rh = 1.2–0.9 AU. This was followed by a rapid increase in active area at about Rh = 0.6 AU, corresponding to the first of three major outbursts ISON experienced inside of 1 AU. The combination of a detected outburst in the light curve and rapid increase in active area likely indicates a major nucleus fragmentation event. The 5–10 sq km active area observed outside of Rh = 0.6 AU is consistent with a 50–100% active fraction for the nucleus, larger than typically observed for cometary nuclei. Although the absolute value of the active area is somewhat dependent on the thermal model employed, the changes in active area observed are consistent among models. The conclusion of a 50–100+% active fraction is robust for realistic thermal models of the nucleus. However the possibility of a contribution of a spatially unresolved distribution of icy grains cannot be discounted. As our [OI]-derived H2O production rates are consistent with values derived using other methods, we conclude that the contribution of O2 photodissociation to the observed [O I] emission is at most 5–10% that of the contribution of H2O for ISON. This is consistent with the expected contribution of O2 photodissociation if O2/H2O ∼ 4%, meaning [O I] emission can still be utilized as a reliable proxy for H2O production in comets as long as O2/H2O ≲ 4%, similar to the abundance measured by the ROSINA instrument on Rosetta at comet 67P/Churyumov–Gerasimenko.

Coma↗