SEARCH · Search NASA

Results for “RINGS - STRESSES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

All sources NASA NTRS DOE OSTI

NASA NTRS2004

Seal ring installation tool

A seal ring tool that allows an installer to position a primary seal ring between hub ends of pipe flanges that are being assembled together. The tool includes a pivoting handle member and extension arms attached to the pivoting handle member. The ends of the arms have side indentation type longitudinal grooves angled toward one another for holding the primary seal ring in place between the hubs of respective pipes that are to be attached together. The arms of the tool can also have flat sides that can be used to abut against an optional second larger seal that is supported within a groove in one of the hub ends so that the second hub end can then be moved against the other side of the primary seal ring. Once the seal ring is positioned between the pipe hubs, the pipe hubs can be moved about the seal ring due to the flat sides of the arms of the tool. The tool eliminates the chances of damaging and contaminating seal rings being installed within pipe hubs that are being attached to one another.

Haselmaier, L. Haynes↗

NASA NTRS2007

Optically Transparent Split-Ring Antennas for 1 to 10 GHz

Split-ring antennas made from optically transparent, electrically conductive films have been invented for applications in which there are requirements for compact antennas capable of operation over much or all of the frequency band from 1 to 10 GHz. Primary examples of such applications include wireless local-area networks and industrial, scientific, and medical (ISM) applications. These antennas can be conveniently located on such surfaces as those of automobile windows and display screens of diverse hand-held electronic units. They are fabricated by conventional printed-circuit techniques and can easily be integrated with solid-state amplifier circuits to enhance gain. The structure of an antenna of this type includes an antenna/feed layer supported on the top or outer face of a dielectric (e.g., glass) and, optionally, a ground layer on the bottom or inner face of the substrate. The ring can be in the form of either a conductive strip or a slot in the antenna/feed layer. The ring can be of rectangular, square, circular, elliptical, or other suitable shape and can be excited by means of a microstrip, slot line, or coplanar waveguide. For example, the antenna shown in the figure features a square conductive-strip split ring with a microstrip feed. In general, an antenna fed at its external boundary in the manner of this invention presents very high impedance, thereby creating an impedance-matching problem. Splitting the ring . that is, cutting a notch through the ring . offers a solution to the problem in that the notch fixes the location of maximum electric field, which location is directly related to the impedance. Thus, an excellent impedance match can be achieved through proper choice of the location of the notch. In geometric layout, such a ring antenna structure is typically between 1.4 and 1.3 the size of a patch antenna capable of operating in the same frequency range. This miniaturization of the antenna is desirable, not only because it contributes to overall miniaturization of equipment, but also because minimization of the extent of the optically transparent, electrically conductive film helps to minimize the electrical loss associated with the surface resistance ( 5 ohms per square) of the transparent, electrically conductive film material. Incidentally, even at 5 ohms per square, this surface resistance is significantly less than that of indium tin oxide film (typically > 25 ohms per square), which, heretofore has been the transparent, electrically conductive film material of choice. At the time of writing this article, information on the composition of the lower-resistance film used in the antennas of this invention was not available.

Lee, Richard Q.↗

NASA NTRS2023

Mercuryʼs Circumsolar Dust Ring as an Imprint of a Recent Impact

A circumsolar dust ring has been recently discovered close to the orbit of Mercury. There are currently no hypotheses for the origin of this ring in the literature, so we explore four different origin scenarios here: the dust originated from (1) the sporadic meteoroid complex that comprises the major portion of the Zodiacal Cloud, (2) recent asteroidal/cometary activity, (3) hypothetical dust-generating bodies locked in mean-motion resonances beyond Mercury, and (4) bodies co-orbiting with Mercury. We find that only scenario (4) reproduces the observed structure and location of Mercury's dust ring. However, the lifetimes of Mercury's co-orbitals (<20 Ma) preclude a primordial origin of the co-orbiting source population due to dynamical instabilities and meteoroid bombardment, demanding a recent event feeding the observed dust ring. We find that an impact on Mercury can eject debris into the co-orbital resonance. We estimate the ages of six candidate impacts that formed craters larger than 40 km in diameter using high-resolution spacecraft data from MESSENGER and find two craters with estimated surface ages younger than 50 Ma. We find that the amount of mass transported from Mercury's surface into the co-orbital resonance from these two impacts is several orders of magnitude smaller than what is needed to explain the magnitude of Mercury's ring inferred from remote sensing. Therefore we suggest that numerous younger, smaller impacts collectively contributed to the origin of the ring. We conclude that the recent impact hypothesis for the origin of Mercury's dust ring is a viable scenario, whose validity can be constrained by future inner solar system missions.

Petr Pokorny↗

NASA NTRS2016

HST-STIS Spectra of Saturn's Rings and Implications for Their Reddening Agent

We obtained HST-STIS spectra of Saturn's main rings in May 2011, using the G230L (and G430L) gratings, with final averaged radial resolution of 160 (and 330) km/pixel. The dataset filled a previous 200-330nm "spectral gap" between Cassini and ground-based spectra. The data provide radial profiles as a function of wavelength, but our most basic product at this point is a set of very low-noise spectra, radially averaged over broad regions of the rings (A, B, C, and Cassini Division). The raw spectra required special processing to remove artifacts due to extended-source grating scatter. We have modeled the spectra using a new particle surface model, which corrects for on-surface shadowing due to the likely very rough ring particle surfaces, and avoids overestimation of intra-mixed "neutral absorber". We correct for non-classical layer effects and finite ring optical depth, and relate our observed reflectivities to the spherical albedos of individual smooth particles. We model these smooth particle albedos using standard Hapke theory for regolith grain mixtures that are either homogeneous and "intramixed" (nonicy absorbers dispersed in water ice regolith grains) or heterogeneous "intimate" mixtures. As candidates for the nonicy contaminants we have considered amorphous carbon, aromatic-rich and aliphatic-rich organic tholins, silicates, hematite and iron metal. For the A and B rings, we find that iron metal (including a new theoretical estimate of the refractive indices of nanometer-sized grains of iron) is not spectrally steep enough in the 200-300nm range, and that aliphatic-rich tholins are either too steep at short wavelengths or too flat at long wavelengths. However, less than 1% by mass of aromatic-rich tholins provides a very good fit across the entire spectral range with no gratuitous "neutral absorber" needed, and a minimum of additional free parameters. The best fits require forward-scattering regolith grains. For the C Ring and Cassini Division, additional absorbers are needed (updated results will be given).

Saturn's Rings↗

NASA NTRS1974

Possible lunar ring dikes

A search for lunar features that showed characteristics of terrestrial ring dikes was conducted, using the Lunar Orbiter series of photographs. Features exhibiting one or more of the following four criteria were included as lunar analogs to terrestrial ring dikes: (1) inner ridges approximately concentric with the crater wall, (2) inner rills approximately concentric with the crater wall, (3) outer ridges and/or rills approximately concentric with the crater wall, and (4) interior and exterior slopes of the crater wall approximately equal. Features exhibiting each of the four criteria were found, and some had combinations of two or more including rills merging into ridges - e.g., in Taruntius and Posidonius. Gambart is an example of equal inner and outer slopes, while Hesiodus A and Marth are two of the best examples of complete inner rings concentric with the outer rings. Ten per cent of the candidates were probable impact craters but had subsequent volcanic activity of a ring dike nature. The initial search showed a distribution of the possible lunar ring dikes that was nonrandom and strongly associated with the margins of the maria, further implying that they are volcanic features.

Cameron, W. S.↗

NASA NTRS1975

Ring current proton decay by charge exchange

Explorer 45 measurements during the recovery phase of a moderate magnetic storm have confirmed that the charge exchange decay mechanism can account for the decay of the storm-time proton ring current. Data from the moderate magnetic storm of 24 February 1972 was selected for study since a symmetrical ring current had developed and effects due to asymmetric ring current losses could be eliminated. It was found that after the initial rapid decay of the proton flux, the equatorially mirroring protons in the energy range 5 to 30 keV decayed throughout the L-value range of 3.5 to 5.0 at the charge exchange decay rate calculated by Liemohn. After several days of decay, the proton fluxes reached a lower limit where an apparent equilibrium was maintained, between weak particle source mechanisms and the loss mechanisms, until fresh protons were injected into the ring current region during substorms. While other proton loss mechanisms may also be operating, the results indicate that charge exchange can entirely account for the storm-time proton ring current decay, and that this mechanism must be considered in all studies involving the loss of proton ring current particles.

Smith, P. H.↗

NASA NTRS1976

Infrared thermal models for Saturn's ring

Infrared (10 and 20 microns) thermal emission data for Saturn's rings are discussed in terms of simple isothermal radiative transfer models of finite optical thickness. Recent brightness temperature measurements, corresponding to essentially maximum ring tilt, indicate that optical single scattering albedos less than 0.75 are required to provide sufficient heating of the ring material. Reconciliation with analyses of the optical scattering properties of the ring requires the backscattering efficiency to be even higher than for a macroscopic sphere. Historical brightness temperature measurements are used to show that no unique isothermal ring model exists. Instead, a temperature gradient perpendicular to the ring plane appears to be present.

Price, M. J.↗

NASA NTRS1976

Multiple ring structures and the problem of correlation between lunar basins

Comparison of multi-ringed, mare-filled basins on the nearside of the moon indicates that a simple one-to-one correspondence of all rings between lunar basins does not exist. The only rings which can be correlated reasonably well between such basins are concentric systems of mare ridges and basin rims, and the frequently cited square-root-of-2 spacing relationship does not correctly describe their spacing. It is concluded that the Cordillera is the rim of the Orientale Basin and is equivalent to the 1340 km diameter ring of the Imbrium Basin and the rims of the other mare-filled basins. The area between the Rook and Cordillera rings is believed equivalent to the marginal shelf areas of the more completely mare-filled basins. A circular arc approximately 520 km diameter located just inside the outer Rook Ring would have been the most likely site for formation of a concentric system of mare ridges, had filling of the Orientale Basin been complete.

Brennan, W. J.↗

NASA NTRS1977

Saturn's rings - A new survey

Observations of radar returns from Saturn's rings, together with radio interferometry of their absorption of radiation from the disk, combine to require an effective radius of ring particles of about 6 cm or larger. It is suggested that the ring particles may also include, in addition to the known ice constituent, a mixture of the clathrated hydrate of methane and ammonia hydrate. A two-density model for ring particles is possible in which a matrix of low density contains many nodules of higher-density ice particles; in this case, radii nearly as large as the observed ring thickness would be possible. Improved resolution in radio observations at 21 cm or, if necessary, at longer wavelengths for narrow ring openings is perhaps the most useful method for determining upper limits on the particle size.

Cook, A. F.↗

NASA NTRS1978

A measurement of the brightness temperature of Saturn's rings at 8-mm wavelength

The brightness temperature of Saturn's rings has been measured at 8-mm wavelength using a millimeter-wavelength interferometer. A ring brightness temperature of 12.7 + or -2 K is obtained with the assumption that the rings are of uniform brightness and the region of emission coincides with the visible A and B rings. This result is higher than comparable results obtained at centimeter wavelengths and may indicate a small increase in the thermal emission from the rings at 8 mm. The low brightness temperature places significant constraints on the nature of the ring particles and implies that they must be either highly metallic or of limited size and composed of a low-loss dielectric material such as water ice.

Janssen, M. A.↗

NASA NTRS1978

On the azimuthal brightness variations of Saturn's rings

A simple semiquantitative explanation is presented which accounts both for the presence of the azimuthal brightness variations in Saturn's ring A and for their absence in ring B. This explanation avoids any ad hoc reliance on albedo variations and/or synchronous rotation of ring particles. Instead, it requires only some degree of self-gravitation between nearby orbiting bodies. A bias in the particle distribution and corresponding photometric effects are thereby produced the latter corresponding very closely to the variations observed in ring A. Their absence in ring B is primarily a consequence of the higher optical thickness and decreasing importance of self-gravitation in that ring.

Franklin, F. A.↗

NASA NTRS1978

A census of Gulf Stream rings, spring 1975

During 1975 several shipboard expendable bathythermograph surveys plus satellite infrared imagery provided a nearly synoptic view of the distribution and number of Gulf Stream rings in the western North Atlantic. Twelve rings were identified; nine were cyclonic (cold core) rings and three were anticyclonic (warm core) rings. This is the largest number of rings ever observed during a short period of time (4 months). Evidence suggests that the mean movement of these rings was southwestward.

Richardson, P. L.↗

NASA NTRS1979

Interferometric observations of Saturn and its rings at a wavelength of 3.71 per cm

Interferometric observations of Saturn and its rings obtained at the Owens Valley Radio Observatory at a wavelength of 3.71 cm (8085 MHz) are presented. Models of the microwave brightness structure of the Saturn system are fit to the observations in order to estimate the brightness temperatures of the planet and its rings. The models allowed making estimates of the brightness temperatures and optical depths of the A, B, and C rings. The ring brightness temperatures and optical depths are compared with a physical ring model of isotropic scatterers in a layer which is many particles thick. The observations are consistent with particles that conservatively scatter the thermal emission from Saturn to the earth and emit no thermal radiation of their own. However, the particle single-scattering albedo that would be most consistent with the observations is slightly less than unity but probably greater than 0.95. There is evidence indicating that the ring particles must be at least a few centimeters in size.

Schloerb, F. P.↗

NASA NTRS1979

International planetary patrol observations of Saturn's rings. II - Four color phase curves and their analysis

New phase curves for Saturn's rings at an intermediate tilt angle B of about 17 deg are presented. Quantitative results for each of the A and B rings are reported in terms of the opposition effect, phase coefficient, and best logarithmic fit to the phase curve. There was no significant difference between the shape of the phase curves for the two rings in each of the four colors, and a four-parameter multiple scattering model of the rings was consistent with the observations. In this model, the difference in the phase curves for different colors can be explained by a variation in the single scattering albedo with wavelength. The observations allow the particles to have the same composition in the A and B rings, so that their different photometric behavior is explained by differences in optical depth and volume density in the two rings.

Esposito, L. W.↗

NASA NTRS1980

Interferometry of Saturn and its rings at 1.30-cm wavelength

Interferometric observations of Saturn and its rings at a wavelength of 1.30 cm are presented in an attempt to place constraints upon the amount of thermal radiation emitted by the ring particles. Model-fitting and aperture synthesis techniques were used to analyze the data obtained on nine baselines at a frequency of 23 GHz. Ring optical depth is found to be close to that observed at visible wavelengths, while ring brightness temperature is only 7 + or - 1 K, requiring the ring particles to be nearly conservative scatterers at this wavelength and implying an upper limit of 2.4 m to the radius of a typical ring particle with a lower limit of 0.95 to its single scattering albedo. An observed difference between planetary radii observed at 1.30 and 3.71 cm is interpreted in terms of limb darkening and found to be marginally different from the predictions of atmospheric models in which NH3 is the principal source of microwave opacity.

Schloerb, F. P.↗

NASA NTRS1980

Electromagnetic scattering lifetimes for dust in Jupiter's ring

The lifetime of the charged, micron-sized dust particles found to lie in a ring at 1.8 Jupiter radii from Jupiter against electromagnetic scattering is estimated. Interactions of the particles with the Jovian magnetic field dipole are found to spread particle orbits out to a much greater extent than observed for particle charges greater than -10 V, and to result in slightly eccentric, open orbits for the dust particles, with eccentricities dependent on particle size. In addition, fluctuations within the magnetic field are found to lead to significant changes in the eccentricity and inclination of the ring particle orbits. It is concluded that Jovian ring particles, if charged to -10 V as is consistent with Voyager data, will be strongly perturbed and scattered on a short time scale (100 yr), so the ring must be constantly replenished or it is a temporary phenomenon. Finally, the dust cloud observed to extend above, below, and beyond the Jupiter ring is attributed to the electromagnetic scattering of particles smaller than the ring particles.

Consolmagno, G. J.↗

NASA NTRS1980

On sound transmission into a stiffened cylindrical shell with rings and stringers treated as discrete elements

In the context of the transmission of airborne noise into an aircraft fuselage, a mathematical model is presented for the transmission of an oblique plane sound wave into a finite cylindrical shell stiffened by stringers and ring frames. The rings and stringers are modeled as discrete structural elements. The numerical case studied was typical of a narrow-bodied jet transport fuselage. The numerical results show that the ring-frequency dip in the transmission loss curve that is present for a monocoque shell is still present in the case of a stiffened shell. The ring frequency effect is a result of the cylindrical geometry of the shell. Below the ring frequency, stiffening does not appear to have any significant effect on transmission loss, but above the ring frequency, stiffeners can enhance the transmission loss of a cylindrical shell.

Koval, L. R.↗

NASA NTRS1980

Vibration characteristics of a steadily rotating slender ring

Partial differential equations are derived to describe the structural vibrations of a uniform homogeneous ring which is very flexible because the radius is very large compared with the cross sectional dimensions. Elementary beam theory is used and small deflections are assumed in the derivation. Four sets of structural modes are examined: bending and compression modes in the plane of the ring; bending modes perpendicular to the plane of the ring; and twisting modes about the centroid of the ring cross section. Spatial and temporal characteristics of these modes, presented in terms of vibration frequencies and ratios between vibration amplitudes, are demonstrated in several figures. Given a sufficiently high rotational rate, the dynamics of the ring approach those of a vibrating string. In this case, the velocity of traveling wave in the material of the ring approaches in velocity of the material relative to inertial space, resulting in structural modes which are almost stationary in space.

Lallman, F. J.↗