Search NASA⌕ Search

SEARCH · Search NASA

Results for “Raman frequencies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Electron–Phonon and Spin–Lattice Coupling in Atomically Thin Layers of MnBi 2 Te 4

MnBi 2 Te 4 represents a new class of magnetic topological insulators in which novel quantum phases emerge at temperatures higher than those found in magnetically doped thin films. Here in this paper, we investigate how couplings between electron, spin, and lattice are manifested in the phonon spectra of few-septuple-layer thick MnBi 2 Te 4 . After categorizing phonon modes by their symmetries, we study the systematic changes in frequency, line width, and line shape of a spectrally isolated A1g mode. The electron–phonon coupling increases in thinner flakes as manifested in a broader phonon line width, which is likely due to changes of the electron density of states. In 4- and 5-septuple thick samples, the onset of magnetic order below the Néel temperature is concurrent with a transition to an insulating state. We observe signatures of a reduced electron–phonon scattering across this transition as reflected in the reduced Fano parameter. Finally, spin–lattice coupling is measured and modeled from temperature-dependent phonon frequency.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A novel fiber-fretting test for tribological characterization of the fiber/matrix interface

Ceramic matrix composites exhibit excellent high temperature properties and are candidate materials for structural applications from jet engines to nuclear fuel cladding. The strength and deformation behavior of these composites are intrinsically tied to the properties of the fiber/matrix interface. This research introduces a novel technique to evaluate the fundamental friction and wear characteristics of these interfaces. A case study on SiC f /PyC/SiC m composites applies in situ fiber fretting to investigate the kinetic friction coefficient and cyclic wear characteristics of the interphase. The experimental methodology is presented in explicit detail to encourage other researchers to explore the capabilities of this technique. Additionally, testing was carried out as a function of fiber roughness, PyC thickness (≈10, 500, 1200 nm), cycle count (10, 100, 1000), and frequency (1, 5, and 10 Hz). The friction coefficient and wear behavior changed with cycle length due to a transition from adhesive to abrasive mechanisms. SEM fractography provided insights to tribological evolution from adhesive sliding to three-body abrasive wear. The structural disorder at the tribo-surface relating to graphitic content and dangling bond density was investigated using Raman spectroscopy. Properties are contextualized with comparison to uniaxial tensile behavior of the parent composite.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Vibrational properties of CuInP 2 S 6 across the ferroelectric transition

In order to explore the properties of a two-sublattice ferroelectric, we measured the infrared and Raman scattering response of CuInP 2 S 6 across the ferroelectric and glassy transitions and compared our findings to a symmetry analysis, calculations of phase stability, and lattice dynamics. In addition to uncovering displacive character and a large hysteresis region surrounding the ferroelectric transition temperature T C , we identify the vibrational modes that stabilize the polar phase and confirm the presence of two ferroelectric variants with opposite polarizations. Below T C , a poorly understood relaxational or glassy transition at T g is characterized by local structure changes in the form of subtle peak shifting and activation of low frequency out-of-plane Cu- and In-containing modes. Here, the latter are due to changes in the Cu/In coordination environments and associated order-disorder processes. Moreover, T g takes place in two steps with another large hysteresis region and significant underlying scattering. Combined with imaging of the room temperature phase separation, this effort lays the groundwork for studying CuInP 2 S 6 under external stimuli and in the ultrathin limit.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Exploring Local Vibrational Structure in Protein-Bound Chlorophyll a: Isotope-Enrichment Experiments and Electrostatic Analysis

Local chlorophyll (Chl) vibrations play an essential role in biological photosynthesis by facilitating rapid energy transfer between pigments. In research studies, they also provide a useful spectroscopic probe of the local protein environment that surrounds each pigment. However, measuring the complete vibrational absorption spectrum of a protein-bound Chl molecule is much more difficult than, for example, Chl in neat solvent due to overlap with protein vibrations that typically drown out Chl vibrational features. Resonance Raman and fluorescence spectroscopies provide a way around this problem for Franck–Condon active vibrations, but these often rely on cryogenic measurement conditions and fail to capture vibrational signatures from, e.g., ester-group vibrations that lack coupling to a convenient electronic transition. In the present contribution, we use 13 C-enrichment of the protein backbone to shift protein background signals to lower frequency, providing a largely clean spectral window in which to study local Chl a C═O stretch modes. A room-temperature absorption spectrum for Chl a in the water-soluble chlorophyll protein (WSCP) of Lepidium virginicum is thus extracted as a difference between protein-plus-pigment and protein-only vibrational spectra. Excellent agreement in the molecular fingerprint region with the vibrational spectrum of Chl a in organic solvents confirms that the resulting spectrum represents the response of the protein-bound Chl a molecule. Furthermore, the ester group resonance is observed to shift in response to the S53P mutation that eliminates a 17 3 ester group hydrogen bond from the protein environment. Finally, we analyze these experimental results using MD-based electrostatic analysis, finding that electric-field mapping at the C atom of the ester group provides a satisfactory explanation for the observed frequency shifts between organic solvent and protein environment. MD analysis further suggests that a red-shifted ester peak observed experimentally for the S53P mutant results from solvation of the 17 3 Chl ester group due increase water penetration into the Chl-binding pocket relative to wild-type WSCP. Here, we anticipate that these results will prove useful both for benchmarking future simulation work and as a reference for interpreting Chl vibrational spectra as a probe of pigment–protein interactions.

14 SOLAR ENERGY↗
DOE OSTI2020

Hollow-cathode chemical vapor deposition of thick, low-stress diamond-like carbon films

A radio-frequency (RF), hollow-cathode plasma source with confining magnetic field is described for the chemical vapor deposition of thick ( > 10 µm), amorphous diamond-like carbon ablator films for inertial confinement fusion applications. Plasma is characterized by optical emission spectroscopy, while properties of the resultant films are measured by a combination of profilometry, Rutherford backscattering spectrometry, elastic recoil detection analysis, X-ray diffraction, Raman spectroscopy, and atomic force microscopy. The dependence of the deposition rate, film density, elemental composition, self-bias and residual stress is reported as a function of RF power. Higher density films were found when using Ar plasma, than N 2 or H 2 plasma. The coatings produced are x-ray amorphous, exhibit low compressive stress ( ~ 100 MPa), high density ( < 1.7 g/cm 3 ), hydrogen content of ~ 30 at.%, and a low average roughness of 0.75 nm. Finally, applications of these films as tunable-density ablators for inertial confinement fusion experiments are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Single-Molecule Vibrational Characterization of Binding Geometry Effects on Isocyanide–Metal Interactions

Isocyanide−metal binding is governed by σ-donation and π-back-bonding, which affects the isocyanide stretching energy, a characteristic probe for ligand−metal interactions. While extensive correlations exist between structure and spectroscopy in molecular isocyanide−metal systems, interactions of isocyanide with crystalline metallic surfaces, where ligands often bind in various geometries, remain underexplored. Conventional vibrational spectroscopies such as infrared and Raman spectroscopies lack the molecular-scale resolution to distinguish this binding inhomogeneity. In contrast, inelastic electron tunneling spectroscopy with scanning tunneling microscopy (STM-IETS) directly visualizes ligand adsorption geometries and their vibrational signatures. Using STM-IETS, we investigate a metal-adsorbed m -terphenyl isocyanide ligand and find that the adsorption geometry on Cu(100) induces a significant shift in isocyanide stretching frequency, more prominent than replacing Cu(100) with Ag(111). Density functional theory confirms that this shift arises from atomic-scale variations in coordination environments. This study elucidates how precise binding influences the vibrational fingerprints of isocyanide ligands, an often-overlooked factor in understanding the isocyanide−metal interplay.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Manipulating Spin–Lattice Coupling in Layered Magnetic Topological Insulator Heterostructure via Interface Engineering

Induced magnetic order in a topological insulator (TI) can be realized either by depositing magnetic adatoms on the surface of a TI or engineering the interface with epitaxial thin film or stacked assembly of 2D van der Waals (vdW) materials. Herein, the observation of spin-phonon coupling in the otherwise non-magnetic TI Bi 2 Te 3 is reported, due to the proximity of FePS 3 (an antiferromagnet (AFM), T N ≈ 120 K), in a vdW heterostructure framework. Temperature-dependent Raman spectroscopic studies reveal deviation from the usual phonon anharmonicity originated from spin-lattice coupling at the Bi 2 Te 3 /FePS 3 interface at/below 60 K in the peak position (self-energy) and linewidth (lifetime) of the characteristic phonon modes of Bi 2 Te 3 (106 and 138 cm –1 ) in the stacked heterostructure. The Ginzburg-Landau (GL) formalism, where the respective phonon frequencies of Bi 2 Te 3 couple to phonons of similar frequencies of FePS 3 in the AFM phase, is adopted to understand the origin of the hybrid magneto-elastic modes. At the same time, the reduction of characteristic TN of FePS 3 from 120 K in isolated flakes to 65 K in the heterostructure, possibly due to the interfacial strain, which leads to smaller Fe-S-Fe bond angles as corroborated by computational studies using density functional theory (DFT). Besides, inserting hexagonal boron nitride within Bi 2 Te 3 /FePS 3 stacking regains the anharmonicity in Bi 2 Te 3 . As a result, controlling interfacial spin-phonon coupling in stacked heterostructure can have potential application in surface code spin logic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Hyperspectral acquisition with ScanImage at the single pixel level: application to time domain coherent Raman imaging

We present a comprehensive strategy and its practical implementation using the commercial ScanImage software platform to perform hyperspectral point scanning microscopy when a fast time-dependent signal varies at each pixel level. In the proposed acquisition scheme, the scan along the X-axis is slowed down while the data acquisition is maintained at a high pace to enable the rapid acquisition of the time-dependent signal at each pixel level. The ScanImage generated raw 2D images have a very asymmetric aspect ratio between X and Y, the X axis encoding both for space and time acquisition. The results are X-axis macro-pixel where the associated time-dependent signal is sampled to provide hyperspectral information. We exemplified the proposed hyperspectral scheme in the context of time-domain coherent Raman imaging, where a pump pulse impulsively excites molecular vibrations that are subsequently probed by a time-delayed probe pulse. In this case, the time-dependent signal is a fast acousto-optics delay line that can scan a delay of 4.5ps in 25 μ s at each pixel level. With this acquisition scheme, we demonstrate ultra-fast hyperspectral vibrational imaging in the low frequency range [10 cm −1 , 150 cm −1 ] over a 500 μm field of view (64 x 64 pixels) in 130ms (∼ 7.5 frames/s). The proposed acquisition scheme can be readily extended to other applications requiring the acquisition of a fast-evolving signal at each pixel level.

Metais, Samuel↗
DOE OSTI2021

Conical Intersection Passages of Molecules Probed by X-ray Diffraction and Stimulated Raman Spectroscopy

Conical intersections (CoIns) play an important role in ultrafast relaxation channels. Their monitoring remains a formidable experimental challenge. We theoretically compare the probing of the S 2 → S 1 CoIn passage in 4-thiouracil by monitoring its vibronic coherences, using off-resonant X-ray-stimulated Raman spectroscopy (TRUECARS) and time resolved X-ray diffraction (TRXD). The quantum nuclear wavepacket (WP) dynamics provides an accurate picture of the photoinduced dynamics. Upon photoexcitation, the WP oscillates among the Franck–Condon point, the S2 minimum, and the CoIn with a 70 fs period. A vibronic coherence first emerges at 20 fs and can be observed until the S 2 state is fully depopulated. The distribution of the vibronic frequencies involved in the coherence is recorded by the TRUECARS spectrogram. Here, the TRXD signal provides spatial images of electron densities associated with the CoIn. In combination, the two signals provide a complementary picture of the nonadiabatic passage, which helps in the study of the underlying photophysics in thiobases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Resilience of the Aurivillius structure upon La and Cr doping in a Bi 5 Ti 3 FeO 15 multiferroic

Here, combining the experimental techniques of high-resolution X-ray diffraction, magnetometry, specific heat measurement, and X-ray photoelectron, Raman and dielectric spectroscopy techniques, we have studied the influence of La and Cr doping on the crystal structure and magnetism of the room temperature Aurivillius multiferroic Bi 5 Ti 3 FeO 15 by investigating the physical properties of (Bi 4 La)Ti 3 FeO 15 and Bi 5 Ti 3 (Fe 0.5 Cr 0.5 )O 15 . The parent (Bi 5 Ti 3 FeO 15 ) and the doped ((Bi 4 La)Ti 3 FeO 15 and Bi 5 Ti 3 (Fe 0.5 Cr 0.5 )O 15 ) compounds crystallize in the A2 1 am space group, which is confirmed through our analysis of high-resolution synchrotron X-ray diffraction data obtained on phase-pure polycrystalline powders. We determined the oxidation states of the metal atoms in the studied compounds as Fe 3+ , Ti 4+ , Cr 3+ , and La 3+ through the analysis of X-ray photoelectron spectroscopy data. The magnetic susceptibilities of the three compounds are marked by the absence of a long-range ordered ground state, but dominated by superparamagnetic clusters with dominant antiferromagnetic interactions. This signature of short-range magnetism is also seen in specific heat as a low temperature enhancement which is suppressed upon the application of external magnetic fields up to 8 T. Our dielectric spectroscopy experiments showed that the three studied compounds display similar features in the dielectric constant measured as a function of frequency. However, upon doping La at the Bi site, the width of the ferroelectric hysteresis loop increases for (Bi 4 La)Ti 3 FeO 15 compared to that of the parent compound Bi 5 Ti 3 FeO 15 , and with Cr doping, Bi 5 Ti 3 (Fe 0.5 Cr 0.5 )O 15 becomes a leaky dielectric. The resilience of the Aurivillius crystal structure towards doping of La at the Bi site and Cr at the Fe site is clearly seen in the bulk properties of magnetic susceptibility, specific heat and the average crystal structure. The relevance of changes in the local structure is evident from our Raman spectroscopy and X-ray pair distribution function studies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

High-Spectral Resolution Lidar (HSRL) Instrument Handbook

High-spectral-resolution lidar (HSRL) systems provide vertical profiles of optical depth, backscatter cross-section, depolarization, and backscatter phase function. All HSRL measurements are calibrated by reference to molecular scattering, which is measured at each point in the lidar profile. Like the Raman lidar (RL), but unlike simple backscatter lidars such as the micropulse lidar (MPL), this enables the HSRL to measure backscatter cross-sections and optical depths without prior assumptions about the scattering properties of the atmosphere. The depolarization observations allow robust discrimination between ice and water clouds. Rigorous error estimates can be computed for all measurements. A very narrow angular field of view reduces multiple scattering contributions. The small field of view, coupled with a narrow optical bandwidth, nearly eliminates noise due to scattered sunlight. The laser transmitter is a diode-pumped, frequency-doubled Nd:YAG laser. Narrow-band, single-frequency operation is provided by injection seeding with a single-frequency, cw-diode-pumped diode laser. The main laser cavity is maintained in resonance with the seed laser by adjusting the cavity length to minimize the time between the Q-switch trigger and the emission of the laser pulse. The emission wavelength is tuned via temperature control of the seed laser crystal and is locked to line #1109 of the iodine absorption spectra. Locking is accomplished by minimizing the transmission through a 2-cm-long iodine absorption cell. Use of a high-repetition-rate laser and expansion of the transmitted beam through a 400-mm telescope reduces the transmitted energy density to eye-safe levels. It is possible to look directly into the output beam without hazard. The receiver and transmitter use the same afocal telescope, simplifying the maintenance of stable alignment of the transmitter and receiver although the angular FOV is only 100 μrad. The small FOV and the 4-kHz repetition rate also limit the near-field signal strength, making it possible to record continuous profiles that start at an altitude of ~100 m and extend to 30 km using photon counting detectors. The small FOV also suppresses multiple scattering contributions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Phonon Spectroscopy in Antimony and Tellurium Oxides

α-Sb 2 O 3 (senarmontite), β-Sb 2 O 3 (valentinite), and α-TeO 2 (paratellurite) are compounds with pronounced stereochemically active Sb and Te lone pairs. The vibrational and lattice properties of each have been previously studied but often lead to incomplete or unreliable results due to modes being inactive in infrared or Raman spectroscopy. Here in this paper, we present a study of the relationship between bonding and lattice dynamics of these compounds. Mössbauer spectroscopy is used to study the structure of Sb in α-Sb 2 O 3 and β-Sb 2 O 3 , whereas the vibrational modes of Sb and Te for each oxide are investigated using nuclear inelastic scattering, and further information on O vibrational modes is obtained using inelastic neutron scattering. Additionally, vibrational frequencies obtained by density functional theory (DFT) calculations are compared with experimental results in order to assess the validity of the utilized functional. Good agreement was found between DFT-calculated and experimental density of phonon states with a 7% scaling factor. The Sb–O–Sb wagging mode of α-Sb 2 O 3 whose frequency was not clear in most previous studies is experimentally observed for the first time at ~340 cm -1 . Softer lattice vibrational modes occur in orthorhombic β-Sb 2 O 3 compared to cubic α-Sb 2 O 3 , indicating that the antimony bonds are weakened upon transforming from the molecular α phase to the layer-chained β structure. The resulting vibrational entropy increase of 0.45 ± 0.1 kB/Sb 2 O 3 at 880 K accounts for about half of the α–β transition entropy. The comparison of experimental and theoretical approaches presented here provides a detailed picture of the lattice dynamics in these oxides beyond the zone center and shows that the accuracy of DFT is sufficient for future calculations of similar material structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Boundary Layer Climatology at ARM Southern Great Plains

Operational since 1992, the Atmospheric Radiation Measurement (ARM) southern great plains (SGP) site at Oklahoma, USA has become a reference research site for meteorological studies. Due to an open data policy the ARM data are used by researchers all over the world. In this report, we review the long-term climatology of the atmospheric boundary layer, SGP instrumentations, the site and some site-specific atmospheric conditions which potentially effect wind turbines within the region. As the atmospheric boundary layer is bounded and influenced by the surface, observations of surface radiation components and heat fluxes are crucial in understanding land-atmosphere interactions. The entrainment of air, updrafts, downdrafts and boundary layer height characteristics is needed for understanding the structure and growth of the atmospheric boundary layer. Therefore, measurements from both surface in-situ and remote sensing observations at SGP provide an overall climatology and their interactions from surface up to the boundary layer. Measurements from a 60 m meteorological tower, surface flux stations, disdrometers, soil temperature and moisture flux plates, coherent Doppler lidar, Raman lidar, radiosondes, and satellite data at SGP central facility were analyzed. All the measurements were generally within a few square kilometers of each other at the central facility. This report focuses on data from January 2010 to June 2020 at SGP central facility. The various sections describe the ARM SGP site and surrounding wind turbines; in-situ and remote sensing instrumentation used in the report; provides mathematical equations to analyze fluxes, turbulence and other boundary layer parameters; a climatological analysis of surface winds, fluxes and thermodynamic parameters for several years; an analysis of observed winds in the framework of Monin-Obukhov Similarity Theory; an analysis of the boundary layer winds and direction from a Doppler lidar; multi-year turbulence estimates through the boundary layer from a Doppler lidar; atmospheric boundary layer water vapor and relative humidity profiles from Raman lidar; cloud base height and boundary layer height from multiple sensors and satellite data; and finally site specific atmospheric conditions, such as nocturnal low-level jets. Diurnal, seasonal and yearly variations of surface, sub-surface and boundary layer quantities, such as wind speed, direction, temperature, atmospheric stability, soil temperature, and various atmospheric fluxes at SGP showed distinct trends useful for focused modeling studies. The applicability of surface similarity theory on ARM SGP data is also evaluated, which showed northerly flows are aligned with MO theory estimates compared to southerly flows. Boundary layer winds and direction profiles for several years from a Doppler lidar shows a consistent presence of a nocturnal low-level jet and predominant southerly wind directions through the boundary layer at SGP. The inter-annual variability at SGP is low (<3.5%), with a mean annual wind speed of approximately 7 m s -1 at 100 m above ground level. Boundary layer turbulence and moisture transport from Doppler and Raman lidars are evaluated, which provides evidence of increased water vapor mass flux into the great plains during nocturnal low-level jets. The moisture flux from nocturnal low-level jets is observed to be maximum during summer periods. A novel machine learning algorithm is implemented to accurately estimate the planetary boundary layer height, providing further insights into growth and destruction of the convective boundary layer height during various seasons and land-atmosphere conditions. The high frequency of low-level clouds during winter, spring and fall seasons is validated using the multi-sensor array and satellite estimates of cloud top height. Satellite vegetative fraction data provides insight into seasonal surface roughness and vegetation variability around SGP site.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Angle-resolved polarized Raman spectroscopy study of phosphorene nanoribbons

We present a systematic angle-resolved polarized Raman spectroscopy (ARPRS) study of black phosphorus (BP) nanostructures formed via electrochemical sodium- and lithium-ion intercalation. Sodium intercalation leads to bundles of densely packed, highly uniform phosphorene nanoribbons (PNRs) separated by parallel amorphous channels, whereas lithium intercalation results in shorter, irregular nanoribbon-like segments with lower aspect ratios. In both cases, six additional Raman peaks (P1–P6) appear alongside the three primary Raman-active modes of BP (A$^{1}_{g}$, B 2g , and A$^{2}_{g}$). These peaks are attributed to the amorphous regions, as confirmed by their isotropic angular dependence in ARPRS measurements. The three BP modes show pronounced angular variations that differ significantly between the two intercalated samples. In sodium-intercalated BP, A$^{1}_{g}$ and A$^{2}_{g}$ modes retain a dumbbell-like angular dependence under parallel polarization with enhanced anisotropy and reduced symmetry under crossed polarization. At the same time, the B 2g mode transitions from four-lobed (cloverleaf) polar plot to a butterfly-like one. In contrast, lithium-intercalated BP exhibits weaker anisotropy and less distinct angular polar plots for all three modes. These differences reflect the sensitivity of phonon behavior to underlying nanostructure morphology. The vibrational frequencies density of states (FDOS) calculations attribute the B 2g mode transformation to phonon band folding and mode mixing in PNRs. This study demonstrates the power of ARPRS in probing phonon-structure relationships and highlights the influence of edge geometry and quantum confinement on phonon dispersion in PNRs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Raman studies of hydrogen trapped in As 4 O 6 ·2H 2 at high pressure and low temperature

In this work, Raman spectroscopic measurements of the arsenolite–hydrogen inclusion compound As 4 O 6 ·2H 2 were performed in diamond anvil cells at high pressure and variable temperature down to 80 K. The experimental results were complemented by ab initio molecular dynamics simulations and phonon calculations. Observation of three hydrogen vibrons in As 4 O 6 ·2H 2 is reported in the entire temperature and pressure range studied (up to 24 GPa). While the experiments performed with protium and deuterium at variable temperatures allowed for the assignment of two vibrons as Q 1 (1) and Q 1 (0) transitions of ortho and para spin isomers of hydrogen trapped in the inclusion compound, the origin of the third vibron could not be unequivocally established. Low-temperature spectra revealed that the lowest-frequency vibron is actually composed of two overlapping bands of A g and T 2g symmetries dominated by H 2 stretching modes as predicted by our previous density functional theory calculations. We observed low-frequency modes of As 4 O 6 ·2H 2 vibrations dominated by H 2 “librations,” which were missed in a previous study. A low-temperature fine structure was observed for the J = 0 → 2 and J = 1 → 3 manifolds of hydrogen trapped in As 4 O 6 ·2H 2 , indicating the lifting of degeneracy due to an anisotropic environment. A non-spherical distribution was captured by molecular dynamics simulations, which revealed that the trajectory of H 2 molecules is skewed along the crystallographic $\langle$111$\rangle$ direction. Last but not least, low-temperature synchrotron powder x-ray diffraction measurements on As 4 O 6 ·2H 2 revealed that the bulk structure of the compound is preserved down to 5 K at 1.6 GPa.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Manipulation of Emergent Collective Excitations via Composition Control in Mixed MPX 3 Correlated 2D Antiferromagnets

Transition metal (i.e., Mn, Fe, Cr) and chalcogen (Se) substituents are introduced into single-crystalline NiPS 3 , and the evolution of the two emergent quasi-particle excitations characteristic to the XXZ correlated antiferromagnetism of NiPS 3 (i.e., spin orbit entangled exciton (SOX) and two-magnon scattering (2M )) are investigated as functions of substituent concentration through comprehensive room- and low-temperature photoluminescence (PL) and Raman spectroscopy studies. These findings are further correlated with the magnetic properties of the same set of compounds reported in prior studies. The work revealed that the SOX emission intensities and linewidths are mainly controlled by the magnetic anisotropy and spin orientations, and are strongly suppressed by the introduction of substituents. The suppression depends on the type of substituent, with Fe affecting the SOX emission more than Mn and Cr. The 2 M scattering is linked to short-range correlations and exhibits greater resiliency against metal atom substitution. While the 2M peak at low temperature gets suppressed and red-shifted in frequency with increasing concentrations of all the substituents, Fe induces the weakest suppression compared to all other substituents. Altogether, these findings revealed the introduction of substituents as a powerful route to control the emergent collective excitations in NiPS 3 and mixed-MPX 3 materials.

2D magnet↗
DOE OSTI2023

Investigation of methane and ethane pyrolysis with highly active and durable iron-alumina catalyst to produce hydrogen and valuable nano carbons: Continuous fluidized bed tests and reaction rate analysis

The goal of this research work was to evaluate a novel iron-alumina catalyst for methane and ethane pyrolysis with high conversion rates to H 2 with a long life time to address two major issues reported with previous catalysts. Fluidized bed tests demonstrated continuous hydrogen production while collecting carbon containing fines. During the 230 h fluid bed test the methane conversion rate to hydrogen at 700 °C remained above 80% for 160 h while creating valuable nano carbons. Similarly high catalyst lifetimes with high methane conversions have not been reported before. Ethane was more active than methane for pyrolysis with 100% conversion to H 2 . Transmission electron microscopy and Raman analysis of the carbon showed single and multiwall nanotubes and conglomerate nano-fibers. Ethane did not impact the allotrope of carbon formed. TGA was used to create a data array that was used for kinetic analysis and reaction model parametric regressions. Ethane had a higher rate of pyrolysis that was 2.3–2.8 times that of methane. Ethane pyrolysis was found to be more sensitive to temperature with a higher activation energy of 62 kJ/mol as compared to methane at 43 kJ/mol. The frequency factor, A i , was significantly higher for ethane at 0.73 [[kmol/m 3 -sec]/[N/m2] n ] compared to 0.03 for methane on the same basis. Both gases had a functional partial pressure order dependence of ~0.6 based on the regression analysis.

08 HYDROGEN↗
DOE OSTI2023

Helical Organic and Inorganic Polymers

Despite being a staple of synthetic plastics and biomolecules, helical polymers are scarcely studied with Gaussian-basis-set ab initio electron-correlated methods on an equal footing with molecules. This article introduces an ab initio second-order many-body Green’s-function [MBGF(2)] method with nondiagonal, frequency-dependent Dyson self-energy for infinite helical polymers using screw-axis-symmetry-adapted Gaussian-spherical-harmonics basis functions. Together with the Gaussian-basis-set density-functional theory for energies, analytical atomic forces, translational-period force, and helical-angle force, it can compute correlated energy, quasiparticle energy bands, structures, and vibrational frequencies of an infinite helical polymer, which smoothly converge at the corresponding oligomer results. These methods can handle incommensurable structures, which have an infinite translational period and are hard to characterize by any other method, just as efficiently as commensurable structures. We apply them to polyethylene (2/1 helix), polyacetylene (Peierls’ system), and polytetrafluoroethylene (13/6 helix) to establish the quantitative accuracy of MBGF(2)/cc-pVDZ in simulating their (angle-resolved) ultraviolet photoelectron spectra, and of B3LYP/cc-pVDZ or 6-31G** in reproducing their structures, infrared and Raman band positions, phonon dispersions, and (coherent and incoherent) inelastic neutron scattering spectra. We then predict the same properties for infinitely catenated chains of nitrogen or oxygen and discuss their possible metastable existence under ambient conditions. They include planar zigzag polyazene (N2)x (Peierls’ system), 11/3-helical isotactic polyazane (NH)x, 9/4-helical isotactic polyfluoroazane (NF)x, and 7/2-helical polyoxane (O)x as potential high-energy-density materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗