SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Soils and regolith breccias contain clues to the geologic processes that contributed to the evolution of the local regolith over time. A suite of ten regolith breccias from the Apollo 15 site were compared with the results of previous studies in order to learn more about the regolith evolution at that site.
Petrographic, mineral chemical, and bulk chemical data are reported for the three large Apollo 12 regolith breccias of the regolith breccia suite and for eight breccias handpicked from Apollo 12 coarse fines. Two samples formed from non-KREEPy anorthositic regolith not presently found at the sampling site. Eight of the samples can be considered mixtures of local basalt and KREEP components, with minor anorthositic components. Mare:KREEP ratios indicated by chemical mixing models range from 86:7 to essentially endmember KREEP. One sample is unlike the others (FeO 23.7; MgO 21.7) and may be a new lithology or alternatively a nonrepresentative sample. Of the 11 samples studied, five appear to be of local origin, three are most likely exotic to the site, and results for three others are inconclusive. The anorthositic breccias formed from Apollo 16-like regolith and may have been transported over several hundred kilometers from the non-KREEPy highlands to the east. Alternatively, they may be of local origin, formed from the material beneath the Apollo 12 basalt flows.
The theoretical evaluation of the lunar regolith fines as a primary source of hydrogen reveals that a minimum order of magnitude increase in hydrogen content is possible in beneficiated fines because both particle size and particle shape play a significant role in the relationship of volume percent of surface coating to grain size. The lunar regolith fines meet the basic requirement for beneficiation because a major portion (minimum two-thirds) of the hydrogen occurs in the less than 20-micron-size fraction, a relatively small part of the fines. Beneficiation should be accomplished by a combination of vibratory screening followed by cyclone and/or possibly electrostatic separation. Early exploitation of the lunar regolith fines for hydrogen probably will be limited to hydrogen obtained as a by-product or co-product from the mining and processing for other elements or materials because a minimum of about 13,600 tons to about 19,600 tons of 100 ppm hydrogen-bearing lunar regolith fines will have to be processed with about 3,100 tons to about 4,500 tons, respectively, of concentrate heated to supply 1 ton of hydrogen, yielding a recovery of about 74 percent to about 51 percent respectively, of the hydrogen.
Compositional (by INAA) and petrographic studies were performed among the smaller rocks (not analyzed previously) from the Apollo 14, 16, and 17 sites as part of a search for regolith samples exotic to the small traverse areas associated with these missions. Of the 40 samples studied, 31 were regolith breccias. Among these, three of the Apollo 14 samples proved to be compositionally unique, particularly the 14315 sample, which is radically different from all other Apollo 14 regolith materials (lower Mg and Fe, far higher Al and far lower REE abundances), and is probably exotic to the Apollo 14 traverse area. Among 10 samples from Apollo 17, all but one proved to be typical Apollo 17 regolith breccia. However, the 72504,10 sample is more than 99 percent pure pyroclastic glass, compositionally identical to the Apollo 17 orange glass obtained at a location 4 km away, attesting to the widespread distribution of orange glass deposits.
Laboratory study of samples of the intermediate and fine-grained regolith, including duricrust peds, is a fundamental prerequisite for understanding the types of physical and chemical weathering processes on Mars. The extraordinary importance of such samples is their relevance to understanding past changes in climate, availability (and possible physical state) of water, eolian forces, the thermal and chemical influences of volcanic and impact processes, and the inventory and fates of Martian volatiles. Fortunately, this regolith material appears to be ubiquitous over the Martian surface, and should be available at many different landing sites. Viking data has been interpreted to indicate a smectite-rich regolith material, implying extensive weathering involving aqueous activity and geochemical alteration. An all-igneous source of the Martian fines has also been proposed. The X-ray fluorescence measurement data set can now be fully explained in terms of a simple two-component model. The first component is silicate, having strong geochemical similarities with Shergottites, but not other SNC meteorites. The second component is salt. Variations in these components could produce silicate and salt-rich beds, the latter being of high potential importance for microenvironments in which liquid water (brines) could exist. It therefore would be desirable to scan the surface of the regolith for such prospects.
Repeated impacts into fragmental targets simulating unconsolidated debris on planetary surfaces have provided empirical insight into the evolution of planetary regoliths. The techniques of dimensional analysis have been employed to quantify and examine the relationships between the more important variables in the evolution of these experimental regoliths. Application of this method to the results of 10 experimental series shows that the quantity of comminuted target mass is directly proportional to (1) the number of impacts, (2) the diameter of the projectile, (3) the mean size of the crystals, (4) the mean grain size of the evolving regolith, (5) the total target mass, (6) the impactor density, and (7) the ratio of the impact velocity to the velocity of sound in the target rock. The comminuted mass is inversely proportional to the density of the target rock and the sorting of the regolith.
Bulk compositions of 21 Apollo regolith breccias were determined using an INAA procedure modified from that of Kallemeyn et al. (1989). With one major exception, namely, the 14076,1 sample, the regolith breccias analyzed were found to be not significantly different from the surfaces from which they were collected. In contrast, the 14076,1 sample from the Fra Mauro (Apollo 14) region is a highly anorthositic regolith breccia from a site where anorthosites are extremely scarce. The sample's composition resembles soils from the Descartes (Apollo 16) highlands. However, the low statistical probability for long-distance horizontal transport by impact cratering, together with the relatively high contents of imcompatible elements in 14076,1 suggest that this regolith breccia originated within a few hundred kilometers of the Apollo 14 site. Its compositional resemblance to ferroan anorthosite strengthens the hypothesis that ferroan anorthosite originated as the flotation crust of a global magmasphere.
NASA hopes to have a manned lunar outpost completed by 2005. In order to establish the base, regolith must be excavated from the lunar surface. Regolith will be used as a source for life-supporting elements and as radiation shielding for the lunar outpost. The design team from the University of Texas at Austin designed excavation and transportation equipment for initial operations of the lunar base. The design team also characterized the elements to be found in the regolith and determined the power required to excavate regolith. The characterization of the soil was based on a literature review of lunar geography. Power requirements for excavation were developed by adapting terrestrial equations for excavation power requirements and adapting them to lunar soil conditions. The design of the excavation and transportation equipment was broken into three functions: loosing, collecting, and transporting. A scarifier was selected to loosen, a bucket was selected to collect, and a load-haul system was selected to transport. The functions are powered by a modular fuel cell powered vehicle that provides power for motion of the equipment.
Parameterizations have been developed for impact glass compositions which makes its possible to acquire geochemical information about pre-impact target materials. The impact glass populations among unrelated highland regoliths including Apollo 16 regolith 64001 and the lunar meteorites ALHA81005 and MAC88105 have been compared. It is concluded that the Apollo 16 impact glasses are compositionally more diverse than those in the lunar meteorites. This diversity reflects the complex geology of the Apollo 16 region, in which extensive exposures of mare basalts occur within 300 km. Apollo 16 regolith 64001 contains a distinctive subset of impact glasses with major element compositions similar to lunar highland meteorite. These impact glasses (less than 100 micrograms) indicate that the lunar highlands are geochemically more diverse than the compositional range currently represented by large (more than 1 gram) samples. Lunar impact glasses provide geochemical constraints on the full range of regolith compositions that occur on the moon.
Thermal effects of micrometeoroid impact into the regoliths of the moon and Mercury, and some comparisons between the regoliths of the two bodies are presented. The impact calculations used to estimate the volumes of melt and vapor produced in the regoliths of the two bodies are described. An overview of the process of impact metamorphism in a modeled regolith target is presented, in which the roles played by impact velocity and target temperature in determining the quantities of melt and vapor are evaluated. The model impact process and fluxes are combined to estimate the production rates for impact melt and vapor on the two bodies, and the results are compared with those of previous studies. It is concluded that the rates of impact melting and vaporization on Mercury are much greater than on the moon. In a given period of time, a factor of 14 times more melt and 20 times more vapor are produced on Mercury than on the moon. A 'typical' Mercurian microcratering event produces 2.6 times more melt than its lunar counterpart; the flux calculated for Mercury is 5.5 times higher than it is at the moon.
The National Aeronautics and Space Administration (NASA) in conjunction with Universities Space Research Association (USRA) has requested that the feasibility of a fleet of regolith tossing devices designed to cover a lunar habitat for radiation protection be demonstrated. The regolith, or lunar soil, protects the lunar habitat and its inhabitants from radiation. Ideally, the device will operate autonomously in the lunar environment. To prove the feasibility of throwing regolith on the Moon, throwing solutions were compared to traditional, Earth-based methods for moving soil. Various throwing configurations were investigated. A linear throwing motion combined with a spring and motor energizing system proved a superior solution. Three different overall configurations for the lunar device are presented. A single configuration is chosen and critical parameters such as operating procedure, system volume, mass, and power are developed. The report is divided into seven main sections. First, the Introduction section gives background information, defines the project requirements and the design criteria, and presents the methodology used for the completion of this design. Next, the Preliminary Analysis section presents background information on characteristics of lunar habitats and the lunar environment. Then, the Alternate Designs section presents alternate solutions to each of the critical functions of the device. Fourth, a detailed analysis of throwing the regolith is done to demonstrate its feasibility. Then, the three overall design configurations are presented. Next, a configuration is selected and the conceptual design is expanded to include system performance characteristics, size, and mass. Finally, the Conclusions and Recommendations for Future Work section evaluates the design, outlines the next step to be taken in the design process, and suggests possible goals for future design work.
The thermal phenomena attending high-velocity impact have profound effects on virtually every aspect of the physical, chemical, and optical evolution of planetary regoliths. Not only do impacts pulverize, redistribute, and mix the various components of a regolith, but they also fuse and vaporize them - changing crystalline material to glass, releasing trapped or implanted gases, and spreading vaporized products across the planet's surface, among many other things. Those wishing to understand the details of regolith evolution must incorporate the effects of impact into their approach to the problem. Derived from a more extensive contribution, a short summary of the thermal processes accompanying impact into planetary regoliths, with the immediate acknowledgment that it is neither exhaustive in its consideration of the existing literature nor exact in any of its treatments, is presented. The reader desiring more information is directed to the relevant papers cited at the end; should they fail to provide satisfaction, he or she is then heartily encouraged to attack the problem immediately.
The spectral properties of some powdered chondrites and minerals altered by Isser impulse are studied in order to estimate possible optical effects of regolith processes (micrometeoritic bombardment). Gradual reduction of overall reflectance and spectral contrast, the increase of continuum slope, the increase of spectrally derived olivine/pyroxene ratio and Fs content of orthopyroxene with increasing alteration degree show that regolith processes could affect optical properties of surface material more heavily than has been previously appreciated. Ordinary chondrites (OC's) are known to account for 80 percent of observed meteorite falls, but so far no main belt parent bodies have been identified for these meteorites. S-asteroids resemble OC's spectrally, but are characterized by a steeper red continuum unlike that of OC's and their spectrally derived mineralogies are far outside OC range. Attempts were made to explain the spectral mismatch between OC's and S asteroids by some process, which alters optical properties of uppermost regolith. However, the spectral studies of shocked (black) OC's, gas-rich OC's, melted OC's and synthetic metal-rich regoliths derived from OC's demonstrate that such altered OC materials darken, but do not redden.
Since the Apollo missions, we have emphasized the following points, which are based on theoretical calculations and on laboratory studies of the properties of evaporated silicate deposits and of lunar samples. The mass of vapor generated by impacts on the lunar surface is comparable in magnitude to the mass of impact melt glasses; the physics of impact into a porous regolith requires that much of this vapor be retained in the soil rather than lost to space (as is widely believed); experimental coatings made from vaporized or sputtered lunar basalt contain abundant inclusions of submicroscopic, super paramagnetic metallic Fe; and this Fe may explain the magnetic signature, low albedo, reddened spectrum, and subdued absorption bands of lunar regolith. Our conclusions have been generally rejected by the lunar geochemical community for two reasons: there seemed to be no direct evidence for vapor deposits in Apollo samples, and it seemed that the lunar optical properties could be explained by the presence of impact melt glasses alone. However, advances in our understanding of the optical properties of glasses and of light scattering by planetary regoliths, and now the direct detection of vapor deposits, show that these objections are not valid. Vapor phase transport is a major process on the lunar surface, and unless its effects are taken into account, the chemical, magnetic, and optical properties of the regolith cannot be understood.
A first-order requirement for spacecraft missions that land on solid planetary objects is instrumentation for mineralogical analyses. For purposes of providing diagnostic information about naturally-occurring materials, the element iron is particularly important because it is abundant and multivalent. Knowledge of the oxidation state of iron and its distribution among iron-bearing mineralogies tightly constrains the types of materials present and provides information about formation and modification (weathering) processes. Because Moessbauer spectroscopy is sensitive to both the valence of iron and its local chemical environment, the technique is unique in providing information about both the relative abundance of iron-bearing phases and oxidation state of the iron. The Moessbauer mineralogy of lunar regolith samples (primarily soils from the Apollo 16 and 17 missions to the Moon) were measured in the laboratory to demonstrate the strength of the technique for in situ mineralogical exploration of the Moon. The regolith samples were modeled as mixtures of five iron-bearing phases: olivine, pyroxene, glass, ilmenite, and metal. Based on differences in relative proportions of iron associated with these phases, volcanic ash regolith can be distinguished from impact-derived regolith, impact-derived soils of different geologic affinity (e.g., highlands, maria) can be distinguished on the basis of their constituent minerals, and soil maturity can be estimated. The total resonant absorption area of the Moessbauer spectrum can be used to estimate total FeO concentrations.
Some techniques for measuring composition and mineralogy remotely detect only the upper few micrometers to millimeters of material. Is this a serious concern for lunar regolith studies? Here it is shown the centimeter-scale variation with depth in the composition of lunar regolith based on results of the studies of regolith cores taken on the Apollo missions. In short, the compositional variation of lunar regolith with depth over tens of centimeters is equivalent to that observed laterally at the surface over kilometers. On average, however, the composition of material in the upper half centimeter is probably reasonably representative of the upper half meter or more (the depth of most Apollo cores), particularly for measurements made from orbit that integrate over a large surface area.
Hapke's photometric model has been widely used in solar system remote sensing applications for nearly two decades. Recently, Hapke extended his model to describe the coherent-backscatter opposition effect and multiple-scattering by particles with anisotropic single particle phase functions (SPPF's). A practical difficulty for retrieving Hapke's model parameters from typical planet, satellite, and asteroid photometry data sets is that the model employs a large number of adjustable parameters (at least eight) that can be reliably constrained only for a small number of planetary data sets in which both disk-resolved and whole-disk observations are available from opposition to very large phase angles. The present work aims to reduce the number of adjustable parameters and preserve (or even enhance) the model's accuracy and usefulness by expressing Hapke's parameters in terms of more fundamental physical properties on which they mutually depend. The most difficult part of this task, described here, is to develop a simple method for computing the effective SPPF for structurally complex regolith grains from optical constants, grain-size distribution, and average regolith porosity. The development of light-scattering models for irregularly shaped particles is a large, complex subject and many sophisticated methods, such as Discrete Dipole Approximation (DDA) and Monte-Carlo simulations, have been explored elsewhere. Many of these methods are computationally intensive and probably impractical for routine substitution in Hapke's model. Here, progress is reported in developing a practical, semi-empirical method for estimating the directional scattering behavior (i.e. SPPF) of irregular regolith grains. The method employs Optical Transfer Function (OTF) techniques to model how the structural complexity of regolith particles broaden and attenuate the angular distribution of scattered light relative to that expected from ideal spherical particles of equivalent size and composition.
Regolith breccias are created when regolith is fused together by shock from nearby impacts. Some of these breccias are so friable that they crumble easily back into the soils from which they formed. Others are compacted enough to survive being launched off a parent body and landing on Earth, as evidenced by our collection of regolith breccia meteorites from both the moon and the asteroids. By comparing and contrasting de-lithified soils to their regolith counterparts, insight can be gained into the breccia forming process.