Search NASA⌕ Search

SEARCH · Search NASA

Results for “SEDIMENTARY ROCK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

CO2 injection with fracturing in geomechanically protected caprock: Task 6 of LLNL's Research Activities to Support DOE's Carbon Storage Program (FWP-FEW0191) (Final Technical Report)

Conventional principles of the design and operation of geologic carbon storage (GCS) require injecting CO 2 below the caprock fracturing pressure to ensure the integrity of the storage complex. In non-ideal storage reservoirs with relatively low permeability, modest injection rates can lead to pressure buildup and hydraulic fracturing of the reservoir and caprock. While the GCS community has generally viewed hydraulic fractures as a key risk to storage integrity, the actual behavior of a caprock hydraulic fracture, particularly from a geomechanical perspective, has not been thoroughly studied. The prevailing method of treating a hydraulic fracture as a high-permeability wing of the storage reservoir might have resulted in erroneous understanding of caprock hydraulic fracture behavior. Comprehensive analyses of monitoring data from the In Salah project suggested that one or more hydraulic fractures may have been created in the reservoir and lower caprock system during injection operations, but did not cause detectable leakage of CO 2 out of the storage complex. This observation coincides with a well-known phenomenon in the oil and gas industry: sedimentary rock formations have many inherent features that naturally protect the formations from unbounded vertical growth of hydraulic fractures.

58 GEOSCIENCES↗

IC reports (2021)

We requested HPC support to continue research on the seismic waves generated by impacts. We used the following codes: (1) the Hybrid Optimization Software Suite (HOSS), developed at LANL. HOSS is based on a combined Finite and Discrete Element Method (FDEM). New material models are developed for the sedimentary rocks. HOSS has been recently benchmarked to iSale and FLAG codes. SPECFEM3D is an open-source code developed since the last 90s. It won the Gordon Bell award for best performance in 2003, was finalist again in 2008 for a run at 0.16 petaflops on 149,784 cores on the ‘Jaguar’ Cray system at Oak Ridge National Laboratory. It also won the BULL Joseph Fourier supercomputing award in 2010.; SW4 is a 4th-order finite difference code developed at LLNL which is currently actively developed to handle complex 3D models and to be ported on future exascale platforms. We assessed our need to a total of 3.9M CPU-hrs for year 1 and and 3.1 M for year 2.

79 ASTRONOMY AND ASTROPHYSICS↗

International Collaborations Activities on Disposal in Argillite R&D: Characterization Studies and Modeling Investigations

This interim report is an update of ongoing experimental and modeling work on bentonite material described in Jové Colón et al. (2019, 2020) from past international collaboration activities. As noted in Jové Colón et al. (2020), work on international repository science activities such as FEBEX-DP and DECOVALEX19 is either no longer continuing by the international partners. Nevertheless, research activities on the collected sample materials and field data are still ongoing. Descriptions of these underground research laboratory (URL) R&D activities are described elsewhere (Birkholzer et al. 2019; Jové Colón et al. 2020) but will be explained here when needed. The current reports recent reactive-transport modeling on the leaching of sedimentary rock.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Disastrous Flash Floods Triggered by Moderate to Minor Rainfall Events. Recent Cases in Coastal Benguela (Angola)

The present work focuses on two recent flash floods in coastal Benguela (Angola), both triggered by moderate rainfall but which had disastrous consequences for local populations (namely 71 deaths in 2015 and 17 in 2019). The research involved a regional survey to establish the effects of these floods combined with a geomorphological and socio-economic analysis of the most affected areas to understand the main forcing factors. The two flash floods produced major damage in restricted sectors within very small coastal catchments (<16 km2). The prevalence of fine-grained sedimentary rocks, relatively steep hills, thin soil cover, and vegetation scarcity are natural factors that promote surface runoff. However, socio-economic conditions are most likely the main reasons of flood damage. Namely, rapid population growth with poor planning and making use of low-quality construction materials, the high waste yields that are not properly managed and the absence of flood risk awareness. In the small valleys around the fast-growing cities of coastal Benguela, hazardous flash floods occur recurrently, even after moderate precipitation. Most affected areas are determined by local conditions that compromise drainage at the time of the rainfall event, being very difficult to predict.

Dinis, Pedro A. (ORCID:0000000175587369)↗

Planetesimal Impact Vapor Plumes and Nebular Shocks Form Chondritic Mixtures

The origin of chondrules and the chondritic sedimentary rocks that dominate the meteoritic record is a long-standing problem in planetary science. Here, we develop a physical model for the formation of chondritic mixtures as an outcome of vaporizing collisions between planetesimals that were dynamically excited by the growth and migration of planets. We present calculations of nebular shock waves generated by impact vapor plumes and focus on aspects of the plume interaction with the nebular gas and dust that have been neglected in previous studies of impact ejecta. We find that when water dominates the vapor, the plumes are relatively cool. However, the plume expansion is supersonic and can drive strong shock waves in the dusty nebular gas. Portions of these nebular shock fronts initially melt nebular dust, forming chondrules that are coupled to the moving front. As the shock front expands and cools, the chondrules solidify, while the shock front entrains additional dust. Eventually, the plume expansion stalls and then hydrodynamically collapses, turbulently mixing variably processed dust and size-sorted chondrules. For probable impact parameters and nebular conditions during giant planet growth and migration, the impact-generated mixtures have characteristics that span the range observed in chondritic meteorites, providing an environment for rapid formation of chondritic assemblages after chondrule formation. Our impact vapor and nebular shocks model, named the IVANS model, links chondrule formation to the overall context of planet formation and provides a framework for interpreting the detailed chronological and geochemical record contained in chondritic meteorites.

79 ASTRONOMY AND ASTROPHYSICS↗

An investigation of volcanic depressions. Part 1: Airfall and intrusive pyroclastic deposits. Part 2: Subaerial pyroclastic flows and their deposits

Pyroclastic ejecta and the deposits they form were classified in many ways, and many interpretations were given to individual terms. Some classifications are based on the modes of orgin and deposition of the ejecta; others emphasized the chemical and physical composition of the ejecta. Particle-size was used as the prime basis of subdivision, and the same size-limits were used as those employed in the classification of sediments and sedimentary rocks.

Williams, H.↗

Structural and lithologic study of Northern Coast Range and Sacramento Valley, California

The author has identified the following significant results. Preliminary analysis of the data received has disclosed two potentially important northwest-trending systems of linear features within the Northern California Coast Ranges. A third system, which trends northeast, can be traced with great uncertainty across the alluviated part of the Sacramento Valley and into the foothills of the Sierra Nevada. These linear features may represent fault systems or zones of shearing. Of interest, although not yet verified, is the observation that some of the mercury concentrations and some of the geothermally active areas of California may be located at the intersection of the Central and the Valley Systems. One, perhaps two, stratigraphic unconformities within the Late Mesozoic sedimentary rocks were detected during preliminary examination of the imagery; however, more analysis is necessary in order to verify this preliminary interpretation. A heretofore unrecognized, large circular depression, about 15 km in diameter, was detected within the alluviated part of the Sacramento Valley. The depression is adjacent to a large laccolithic intrusion and may be geologically related to it. Changes in the photogeologic characteristics of this feature will continue to be monitored.

Rich, E. I.↗

Utilizing ERTS-A imagery for tectonic analysis through study of Big Horn Mountains region

The author has identified the following significant results. MSS scene 1085-17294 of the Big Horn region has been subjected to detailed structural analysis. Band 7 is particularly good for revealing structural and drainage patterns because of enhance topographic detail and the subdued vegetational contrasts. Considerable stereo coverage through sidelap with adjoining scenes adds to the effectiveness of the study and has been used on both positive transparencies and enlarged prints. Negative prints of Band 7 positive transparencies have proven to be much more useful than positive prints because the higher resolution of the positive transparencies can be maintained. The Bighorn Mountains are crisscrossed by a number of prominent topographic linears, most of which can be correlated with known fault and shear zones in the Precambrian crystalline core. Many of these do not appear to continue into the flanking sedimentary rocks and a few that do (Tensleep, Tongue River lineaments) are very difficult to trace farther out into the basins. The Tongue River lineament, long a source of speculation and uncertainty as to its existence, appears as a very prominent discontinuity in the imagery.

Hoppin, R. A.↗

An interpretation of a geologic map of Fannin County, Texas, prepared by ADP techniques from ERTS MSS data

Multispectral scanner data, collected by ERTS-1 from an area in northeast Texas underlain by structurally simple cretaceous sedimentary rocks, were analyzed using several automatic data processing techniques. Training areas for the computer analysis were selected in three ways using: (1) an unsupervised classifier, (2) the unsupervised classifier to further refine training areas, and (3) available ground information. The first two methods utilize the capability of the unsupervised classifier to the unsupervised classifier to group resolution elements with similar spectral properties. With the imagery produced by these procedures, several geologic features can be identified. The most easily recognizable features are streams and other water bodies. The approximate location of contacts between several rock units can be mapped.

Henderson, J. A., Jr.↗

Geologic interpretation of ERTS-1 satellite images for West Aswan Area, Egypt

ERTS-1 images of West Aswan area were interpreted in terms of geology, drainage, and structure. Twenty-two geological units were distinguished on ERTS-1 images in West Aswan area covering geological formations and erosional levels within some formations ranging from the Precambrian to the Quaternary. Apart from the distinction of Aswan monumental granite the investigated area shows very interesting exposures of sedimentary rocks ranging from the Cretaceous to the Quaternary. Of special interest is the delineation of the iron-ore member of the Nubian Sandstone and the phosphate-bearing formation. The tracing of the geological formations from south to north and the distinction of the varied geological units within the Pliocene and Quaternary, and the discussion on the origin of tufa are of particular significance. Also, the tracing on these images of major fractures and faults intercepting Aswan Dam Reservoir and their significance on the seepage and possible future development of diversion channels from reservoir is emphasized.

Elshazly, E. M.↗

A brief description of geological and geophysical exploration of the Marysville geothermal area

Extensive geological and geophysical surveys were carried out at the Marysville geothermal area during 1973 and 1974. The area has high heat flow (up to microcalories per square centimeter-second, a negative gravity anomaly, high electrical resistivity, low seismic ground noise, and nearby microseismic activity. Significant magnetic and infrared anomalies are not associated with the geothermal area. The geothermal anomaly occupies the axial portion of a dome in Precambrian sedimentary rocks intruded by Cretaceous and Cenozoic granitic rocks. The results from a 2.4-km-deep test well indicate that the cause of the geothermal anomaly is hydrothermal convection in a Cenozoic intrusive. A maximum temperature of 95 C was measured at a depth of 500 m in the test well.

Blackwell, D. D.↗

Geological mapping in northwestern Saudi Arabia using LANDSAT multispectral techniques

Various computer enhancement and data extraction systems using LANDSAT data were assessed and used to complement a continuing geologic mapping program. Interactive digital classification techniques using both the parallel-piped and maximum-likelihood statistical approaches achieve very limited success in areas of highly dissected terrain. Computer enhanced imagery developed by color compositing stretched MSS ratio data was constructed for a test site in northwestern Saudi Arabia. Initial results indicate that several igneous and sedimentary rock types can be discriminated.

Blodget, H. W.↗

Evaluation of EREP techniques for geological mapping

The author has identified the following significant results. Skylab photographs may be successfully utilized for preparing a reconnaissance geological map in the areas where no maps or semi-detailed maps exist. Large coverage of area and regional perspective from Skylab photographs can help better coordination in regional mapping. It is possible to delineate major structural trends and other features like mega-lineaments, geofractures, and faults, which have evaded their detection by conventional methods. The photointerpretability is better in areas dominated by sedimentary rocks. Rock units of smaller extent and having poor geomorphic expressions are difficult to map. Demarcation of quaternary river alluvium can be made with better precision and ease with the Skylab photographs. Stereoscopic viewing greatly helps in interpretation of area structures. Skylab photographs are not good for preparing geological maps larger than 1:270,000 scale.

Vandermeermohr, H. E. C.↗

Use of ERTS imagery for natural resources research and development in Lesotho

The author has identified the following significant results. As far as the geological aspects of the project were concerned, the project was a success. It was concluded that: (1) It is possible to trace the lithological boundaries between sedimentary rocks and basaltic rocks, both extrusive and intrusive. (2) It was possible to localize sponges in the mountain areas, some of which may conceal undiscovered diamond pipes. (3) Possible main structural axes were localized within the framework of lineaments. Due to drought which occured at the time the images were gathered by ERTS-1, the usefulness of the data was limited for agricultural purposes.

Nixon, P. H.↗

Application of satellite remote-sensing data to land selection and management

A pilot project conducted to demonstrate the utility and economy of satellite data in preparing thematic maps of a wilderness area emphasizing those resources of greatest interest to the potential owner is described. Vegetation maps delineating potential commercial timber and maps of suggested mineral prospecting areas of seven scattered regions were prepared by interpretation of LANDSAT images, coupled with a limited amount of ground truth. Images acquired both in winter and summer seasons were registered to township maps and used in making interpretations of the areal extent of commercial timber potentials. The amount of snow cover visible through the forest canopies was found to be a useful indicator of timber potentials. Identification was made of characteristic topographic features which are typical of flood plain deposits or of the well developed trellis drainage patterns which can indicate the strike of structural grain of underlying Cretaceous sedimentary rocks. The presence of igneous and mixed igneous and metamorphic rocks were indicated by combinations of spectral differences and anomalous interruptions of local radial drainage patterns.

Stringer, W. J.↗

Multidisciplinary study on Wyoming test sites

The author has identified the following significant results. Ten EREP data passes over the Wyoming test site provided excellent S190A and S190B coverage and some useful S192 imagery. These data were employed in an evaluation of the EREP imaging sensors in several earth resources applications. Boysen Reservoir and Hyattsville were test areas for band to band comparison of the S190 and S192 sensors and for evaluation of the image data for geologic mapping. Contrast measurements were made from the S192 image data for typical sequence of sedimentary rocks. Histograms compiled from these measurements show that near infrared S192 bands provide the greatest amount of contrast between geologic units. Comparison was also made between LANDSAT imagery and S190B and aerial photography for regional land use mapping. The S190B photography was found far superior to the color composite LANDSAT imagery and was almost as effective as the 1:120,000 scale aerial photography. A map of linear elements prepared from LANDSAT and EREP imagery of the southwestern Bighorn Mountains provided an important aid in defining the relationship between fracture and ground water movement through the Madison aquifer.

Houston, R. S.↗

Application of remote sensor data to geologic analysis of the Bonanza test site, Colorado

The author has identified the following significant results. The Hayden Pass (Orient mine area) includes 60 sq miles of the northern Sangre de Cristo Mountains and San Luis Valley in south-central Colorado. Based on interpretation of the remote sensor data, a geologic map was prepared and compared with a second geologic map, prepared from interpretation of both remote sensor data and field data. Comparison of the two maps gives an indication of the usefulness and reliability of the remote sensor data. The relative utility of color and color infrared photography was tested. The photography was used successfully to locate 75% of all faults in a portion of the geologically complex Bonanza volcanic center and to map and correctly identify 93% of all quaternary deposits and 62% of all areas of tertiary volcanic outcrop. Using a filter wheel photometer, more than 8,600 measurements of band reflectance of several sedimentary rocks were performed. The following conclusions were drawn: (1) the typical spectral reflectance curve shows a gradual increase with increasing wavelength; (2) the average band reflectance is about 0.20; and (3) within a formation, the minimum natural variation is about 0.04, or about 20% of the mean band reflectance.

Lee, K.↗

New evidence for impact origin of the Bushveld Complex, South Africa

The importance of hypervelocity impacts as a geologic process is demonstrated by the example of the Bushveld Complex and the (nearby) Vredefort Ring. Each is interpreted as the result of four simultaneous impacts modified by large-scale endogenic processes triggered by the impact event. The layered mafic sequence and the voluminous red granite associated with the complex are endogenic magmas, probably generated by pressure release accompanying crater excavation. Shock melting of older sedimentary rocks must have produced a layer of impact melt (the Rooiberg Felsite), the upper part of which was extruded over its originally chilled crust as a series of thick lava flows. Field evidence and radiometric age determinations indicate that the Bushveld Complex formed approximately 2000 billion years ago.

Rhodes, R. C.↗