Search NASA⌕ Search

SEARCH · Search NASA

Results for “SEEBECK EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Fabrication and Spark plasma sintering of nanostructured bismuth telluride (Bi{sub 2}Te{sub 3})

Thermoelectric (TE) devices can harvest residual low-grade waste heat energy. Bismuth telluride (Bi{sub 2}Te{sub 3}) and its alloys are mostly used TE materials in the bulk form for making TE modules. We report a simple, fast and very high yield synthetic process for the bulk Bi{sub 2}Te{sub 3} nanopowders with hexagonal plate like morphology. Spark plasma sintering (SPS) process has been optimized in order to preserve nanostructure while achieving a high compaction density of the pellets. Electron microscopy analysis was used to determine the effect of SPS parameters during compaction on the grain growth. Optimal conditions for the fabricated nanopowder was determined as 673 K, 70 MPa pressure with no holding time, which resulted in average lateral grain size in the range of 165-190 nm for a compact density of 98%. About 50% reduction of thermal conductivity was observed as compared to its bulk counterparts, revealing the feasibility of suggested route in the preservation of nanostructure and enhanced phonon scattering.

36 MATERIALS SCIENCE↗

Extended Analytic Device Optimization Employing Asymptotic Expansion

Analytic optimization of a thermoelectric junction often introduces several simplifying assumptionsincluding constant material properties, fixed known hot and cold shoe temperatures, and thermallyinsulated leg sides. In fact all of these simplifications will have an effect on device performance,ranging from negligible to significant depending on conditions. Numerical methods, such as FiniteElement Analysis or iterative techniques, are often used to perform more detailed analysis andaccount for these simplifications. While numerical methods may stand as a suitable solution scheme,they are weak in gaining physical understanding and only serve to optimize through iterativesearching techniques. Analytic and asymptotic expansion techniques can be used to solve thegoverning system of thermoelectric differential equations with fewer or less severe assumptionsthan the classic case. Analytic methods can provide meaningful closed form solutions and generatebetter physical understanding of the conditions for when simplifying assumptions may be valid.In obtaining the analytic solutions a set of dimensionless parameters, which characterize allthermoelectric couples, is formulated and provide the limiting cases for validating assumptions.Presentation includes optimization of both classic rectangular couples as well as practically andtheoretically interesting cylindrical couples using optimization parameters physically meaningful toa cylindrical couple. Solutions incorporate the physical behavior for i) thermal resistance of hot andcold shoes, ii) variable material properties with temperature, and iii) lateral heat transfer through legsides.

Thermoelectric Generators↗

Seebeck Coefficient Measurement and Its Narrow Band Model Interpretation in FeTe{sub 0.5}Se{sub 0.5} Superconductor

We have measured Seebeck coefficient (S) of FeTe{sub 0.5}Se{sub 0.5} superconducting sample from 10 to 300 K. The variation of Seebeck coefficient with temperature of this system was found to be very anomalous, and the overall experimental observation of the S(T) was studied in the outline of a narrow-band model. In high-temperature region, the Seebeck coefficient is almost independent of temperature. Further, from the study of high-temperature magnitude of S, sample undergoes a change in sign in the Seebeck coefficient, wherein, appearance of a negative peak around 22 K and subsequently, its Seebeck coefficient goes to zero in the superconducting transition temperature regime around 11 to 13 K. It is revealed that the bandwidth and a small asymmetry involved in narrow bands give a realistic explanation to the anomalous temperature dependence of Seebeck coefficient of FeTe{sub 0.5}Se{sub 0.5} system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of rare-earth elements doping on thermoelectric properties of Ca{sub 0.98}Dy{sub 0.02}MnO{sub 3} at high temperature

Ca{sub 0.98}Dy{sub 0.02}MnO{sub 3} and Ca{sub 0.96}Dy{sub 0.02}Re{sub 0.02}MnO{sub 3} (Re=La, Pr, Sm, Eu, Ho, and Yb) have been synthesized by the solid state reaction method. Samples with relative densities all over 96% have been obtained. Thermoelectric properties are evaluated between 300 and 1000 K. The electrical resistivity shows a typical metal-like conductivity behavior, and at high temperature, 973 K, decreases from 36.1 mΩ cm for Ca{sub 0.98}Dy{sub 0.02}MnO{sub 3} to 8.6 mΩ cm for Ca{sub 0.96}Dy{sub 0.02}Yb{sub 0.02}MnO{sub 3}. Both the absolute values of Seebeck coefficient and thermal conductivity are reduced by the introduction of second rare-earth element. The highest power factor of 415 μW/(K{sup 2}m) is obtained for Ca{sub 0.96}Dy{sub 0.02}Yb{sub 0.02}MnO{sub 3} sample, resulting in the highest dimensionless figure of merit (ZT) 0.25 at 973 K. This value shows an improvement of 144% compared with that of Ca{sub 0.98}Dy{sub 0.02}MnO{sub 3} ceramics at the same temperature. - Graphical abstract: The Ca{sub 0.96}Dy{sub 0.02}Re{sub 0.02}MnO{sub 3} (Re=La, Pr, …, Yb) were prepared by solid state reaction. Highest ZT value obtained is 0.25 at 973 K for Re=Yb, which shows 144% improvement compared with Ca{sub 0.98}Dy{sub 0.02}MnO{sub 3}. - Highlights: • Ca{sub 0.96}Dy{sub 0.02}Re{sub 0.02}MnO{sub 3} (Re=La, Pr, …, Yb) are produced by solid state reaction. • Lowest resistivity is obtained due to the highest carrier mobility for Re=Yb. • Highest power factor obtained is 415 μW/(K{sup 2}m) at 973 K for Re=Yb. • Highest ZT value obtained is 0.25 at 973 K for Ca{sub 0.96}Dy{sub 0.02}Yb{sub 0.02}MnO{sub 3} sample.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermoelectric properties of Fe and Al double substituted MnSi{sub γ} (γ~1.73)

Two series of Fe and Al double substituted MnSi{sub γ} chimney ladders with a nominal valence electron count, VEC=14 per transition metal were prepared (γ=1.75). Simultaneous replacement of Mn with Fe and Si with Al yielded the Mn{sub 1−x}Fe{sub x}Si{sub 1.75−x}Al{sub x} series while the second Mn{sub 1−x}Fe{sub x}Si{sub 1.75–1.75x}Al{sub 2x} series follows the pseudo-binary between MnSi{sub 1.75} and FeAl{sub 2}. Scanning electron microscopy and elemental mapping revealed that ~60% of the nominal Al content ends up in the product with the remainder lost to sublimation, and that up to 7% Al can be substituted in the main group sublattice. Profile analysis of X-ray powder diffraction data revealed gradual changes in the cell metrics, consistent with the simultaneous substitution of Fe and Al in a fixed ratio. All samples are p-type with VEC≈13.95 from the structural data and ~1×10{sup 21} holes cm{sup −3} from variable temperature Seebeck measurements. The substituted samples have lower electrical resistivities (ρ{sub 300} {sub K}=2–5 mΩ cm) due to an improved microstructure. This leads to increased thermoelectric power factors (largest S{sup 2}/ρ=1.95 mW m{sup −1} K{sup −2}) compared to MnSi{sub γ}. The thermal conductivity for the Mn{sub 0.95}Fe{sub 0.05}Si{sub 1.66}Al{sub 0.1} sample is 2.7 W m{sup −1} K{sup −1} between 300 and 800 K, and is comparable to literature data for the parent material. - Graphical abstract: The crystal structure, microstructure and thermoelectric properties of Fe and Al double substituted MnSi{sub γ} (γ~1.73) have been investigated. - Highlights: • Up to 7% Al can be substituted in MnSi{sub γ} when co-doped with Fe. • Improved microstructure and reduced electrical resistivities for Al substituted samples. • Largest power factor 1.95 mW m{sup −1} K{sup −2} and best estimated ZT=0.5.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhancement of redox- and phase-stability of thermoelectric CaMnO{sub 3−δ} by substitution

Redox Reactivity and structural phase transitions have a major impact on transport and me-chemical properties of thermoelectric CaMnO{sub 3−δ}. In this study series of Ca{sub 1−x}A{sub x}Mn{sub 1−y}B{sub y}O{sub 3−δ} (0≤x,y≤0.8) compounds, each with A-site (Dy{sup 3+}, Yb{sup 3+}) or B-site (Nb{sup 5+}, Ta{sup 5+} and Mo{sup 6+}, W{sup 6+}) substitution, were synthesized and crystallographically analyzed. It was found that the high-temperature oxygen content is widely independent from the substituent. Subsequently, with increasing temperature the differences in the Seebeck coefficient vanish above 1200 K. With increasing substitution the orthorhombic distortion of the perovskite-like phase increases. The orthorhombic distortion and the upper temperature limit of the stability of the orthorhombic crystal structure show an almost linear dependency. Accordingly, the mechanical stability of all-oxides thermoelectric converters at temperatures exceeding 1000 K will be increased employing materials with high substitution level and substituents inducing a high orthorhombic distortion. - Graphical abstract: Thermoelectric n-type CaMn{sub 0.98}W{sub 0.02}O{sub 3−δ}—Transport properties and expansion coefficient of: Oxygen loss (green region) and upper stability limit of the orthorhombic phase (yellow region) strongly affect the transport properties. Both features also cause lattice expansion, which leads to cracking of thermoelectric all-oxide converters. We report how the upper limit for application can be shifted to even higher temperatures. - Highlights: • Level of Mn{sup 3+} at RT determines reduction behavior of Ca{sub 1−x}A{sub x}Mn{sub 1−y}B{sub y}O{sub 3−δ} at HT. • Differences in Seebeck coefficient vanish at T>1200 K independent from substitution. • Substitution increases orthorhombicity of Ca{sub 1−x}A{sub x}Mn{sub 1−y}B{sub y}O{sub 3−δ}. • Linear dependence of orthorhombicity and phase stability. • Design guidelines for increase of mechanical stability of all-oxide converters.

36 MATERIALS SCIENCE↗

High temperature transport properties of co-substituted Ca{sub 1−x}Ln{sub x}Mn{sub 1−x}Nb{sub x}O{sub 3} (Ln = Yb, Lu; 0.02 ≤ x ≤ 0.08)

Highlights: • The thermoelectric Ca{sub 1−x}Ln{sub x}Mn{sub 1−x}Nb{sub x}O{sub 3} (Ln = Yb, Lu) perovskite are prepared by solid state reaction. • The high temperature transport properties are explored. • The co-substituted Ca{sub 1−x}Ln{sub x}Mn{sub 1−x}Nb{sub x}O{sub 3} shows non-metal-like temperature dependence of resistivity. • The Seebeck coefficient of Ca{sub 1−x}Ln{sub x}Mn{sub 1−x}Nb{sub x}O{sub 3} exhibits metallic nature. • The puzzling transport phenomenon is originated from oxygen vacancy related defect centres. - Abstract: The co-substituted Ca{sub 1−x}Ln{sub x}Mn{sub 1−x}Nb{sub x}O{sub 3} (Ln = Yb, Lu; 0.02 ≤ x ≤ 0.08) are synthesized by solid-state reaction and the electronic transport properties are investigated. Rietveld refinement confirms the formation of single phase orthorhombic structure with gradual increase of cell parameters with doping level. The electronic transport properties such as Seebeck coefficient and electrical resistivity decrease with increasing the dopant concentration for both the co-substituted compositions. All the compositions of Ca{sub 1−x}Ln{sub x}Mn{sub 1−x}Nb{sub x}O{sub 3} show nonmetal-like temperature dependence of resistivity; whereas metal-like temperature dependence of thermopower. This inconsistency is explained by the formation of oxygen vacancy associated defect centres that originates from partial reduction of Mn{sup 4+} to Mn{sup 3+} due to co-substitution. The defect centres act as extrinsic carriers and cause additional contribution to the entropy of the system, leading to increase of Seebeck coefficient as a function of temperature. The transport mechanism of charge carriers is explained in the framework of Mott’s small polaron hopping mechanism.

36 MATERIALS SCIENCE↗

Stabilization of high-performance rock-salt LiMnSbTe3 thermoelectrics with embedded van der Waals-like gaps

Rock-salt-structured compounds like lead chalcogenides are promising thermoelectrics, as their high symmetry, strong anharmonicity, and favorable phase behavior collectively lead to high performance by enabling large power factors and ultralow thermal conductivity. Here, we report LiMnSbTe 3 , a new rock-salt semiconductor stabilized through targeted chemical design by combining hexagonal MnTe with cubic LiSbTe 2 . Embedded in the highsymmetry matrix, van der Waals-like gaps form due to Sb 2 Te 3 nanoscale segregation, which acts as effective phonon-scattering centers, leading to a low lattice thermal conductivity of 0.37Wm- 1 K -1 at 873 K with alloy scattering from disordered cations. The ordered local structure of Sb2Te 3 -type vdW-like gaps and the cross-gap interaction facilitate the carrier transport. Aided by energyconverged valence bands and a paramagnon drag effect, high Seebeck coefficients and enhanced power factor can be achieved, leading to a high ZT of 1.2 at 873 K. Furthermore, introducing Mn deficiency increases ZT to 1.5, highlighting the potential for higher performance through optimized doping or alloying. A segmented single-leg thermoelectric module achieves an output power density of 0.52 Wcm -2 and an efficiency of 8.7% under ΔT of 478 K, further demonstrating its promising thermoelectric applications.

42 ENGINEERING↗

Dynamic in situ observations of electrical and structural changes in thin thermoelectric (Bi{sub 0.15}Sb{sub 0.85}){sub 2}Te{sub 3} films

Thin films of (Bi{sub 0.15}Sb{sub 0.85}){sub 2}Te{sub 3} were prepared by dc magnetron sputter deposition on different substrates. It is well known that thermal treatment of as-deposited p-type (Bi{sub 0.15}Sb{sub 0.85}){sub 2}Te{sub 3} films leads to an enhancement of the power factor. Whereas up to now only the initial (as deposited) and the final (after annealing) film stages have been investigated, here, the dynamic changes of sputter-deposited film properties have been observed by in situ measurements. The enhancement of the power factor shows a significant dependence on thermal treatment. The best thermoelectric films have been prepared at a substrate temperature of 170 deg. C, with a power factor of 24.4 muW/(cm K{sup 2}). The changes in the Seebeck and Hall coefficients are caused by the enhancement in the Hall mobility after annealing. In situ x-ray diffractometry shows the generation of additional Te in dependence of the temperature. This is also confirmed by energy-dispersive x-ray microanalysis and the corresponding mapping in a scanning electron microscope. It is supposed that the locally well-defined Te enrichment is the reason for the improvement in the integral film transport properties.

36 MATERIALS SCIENCE↗

Thermal conductivity and Seebeck coefficients of icosahedral boron arsenide films on silicon carbide

The thermal conductivity of icosahedral boron arsenide (B{sub 12}As{sub 2}) films grown on (0001) 6H-SiC substrates by chemical vapor deposition was studied by the 3{omega} technique. The room temperature thermal conductivity decreased from 27.0 to 15.3 W/m K as the growth temperature was decreased from 1450 to 1275 deg. C. This is mainly attributed to the differences in the impurity concentration and microstructure, determined from secondary ion mass spectrometry and high resolution transmission electron microscopy, respectively. Callaway's theory was applied to calculate the temperature-dependent thermal conductivity, and the results are in good agreement with the experimental data. Seebeck coefficients were determined as 107 {mu}V/K and 136 {mu}V/K for samples grown at 1350 deg. C with AsH{sub 3}/B{sub 2}H{sub 6} flow ratio equals to 1:1 and 3:5, respectively.

36 MATERIALS SCIENCE↗

Mg doped InN and confirmation of free holes in InN

We report a systematic investigation on Mg doped InN epilayers grown by radio-frequency plasma-assisted molecular beam epitaxy. Electrolyte capacitance voltage (ECV) combined with thermopower measurements find p-type conduction over an Mg concentration range. For InN:Mg in this p-type 'window' the Seebeck coefficients dramatically change their signs from negative to positive when the thickness of undoped InN interlayer decreases to zero. This notable sign change of Seebeck coefficient explains the previous inconsistency between ECV and thermopower results and confirms the existence of mobile holes in the InN:Mg. Taking into account the undoped InN interlayer, the hole density and mobility are extracted.

36 MATERIALS SCIENCE↗

High-temperature thermoelectric properties of nanostructured Ca{sub 3}Co{sub 4}O{sub 9} thin films

We prepared nanostructured Ca{sub 3}Co{sub 4}O{sub 9} (CCO) thin films by promoting localized epitaxial growth on polycrystalline Al{sub 2}O{sub 3} substrates. The thermoelectric properties of the CCO films were studied in the temperature range 300 to 1023 K. We confirmed that localized epitaxial growth occurred on the seed grains that dominate the (006) plane. The nanostructured CCO thin films were found to have a maximum Seebeck coefficient of 206 {mu}V/K and a power factor (at 920 K) of 0.514 mW/mK{sup 2}. Moreover, the presence of nanostructure was found to reduce the thermal conductivity, and thus, should enhance the overall performance of CCO films in thermoelectric devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A high temperature apparatus for measurement of the Seebeck coefficient

A high temperature Seebeck coefficient measurement apparatus with various features to minimize typical sources of error is designed and built. Common sources of temperature and voltage measurement error are described and principles to overcome these are proposed. With these guiding principles, a high temperature Seebeck measurement apparatus with a uniaxial 4-point contact geometry is designed to operate from room temperature to over 1200 K. This instrument design is simple to operate, and suitable for bulk samples with a broad range of physical types and shapes.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Structural and thermoelectric properties of BaRCo{sub 4}O{sub 7} (R = Dy, Ho, Er, Tm, Yb, and Lu)

The structure and thermoelectric properties of a series of barium lanthanide cobaltites, BaRCo{sub 4}O{sub 7} (R = Dy, Ho, Er, Tm, Yb, and Lu), which were prepared using the spark plasma synthesis technique, have been investigated. The space group of these compounds was re-determined and confirmed to be P31c instead of the reported P6{sub 3}mc. The lattice parameters a and c range from 6.26279(2) Angst to 6.31181(6) Angst , and from 10.22468(6) Angst to 10.24446(15) Angst for R = Lu to Dy, respectively. The crystal structure of BaRCo{sub 4}O{sub 7} is built up from Kagome sheets of CoO{sub 4} tetrahedra, linked by triangular layers of CoO{sub 4} tetrahedra. The values of figure of merit (ZT) of the BaRCo{sub 4}O{sub 7} samples were determined to be around 0.02 at 800 K. X-ray diffraction patterns of these samples have been determined and submitted to the Powder Diffraction File.

36 MATERIALS SCIENCE↗

Anomalously high thermoelectric power factor in epitaxial ScN thin films

Thermoelectric properties of ScN thin films grown by reactive magnetron sputtering on Al{sub 2}O{sub 3}(0001) wafers are reported. X-ray diffraction and elastic recoil detection analyses show that the composition of the films is close to stoichiometry with trace amounts ({approx}1 at. % in total) of C, O, and F. We found that the ScN thin-film exhibits a rather low electrical resistivity of {approx}2.94 {mu}{Omega}m, while its Seebeck coefficient is approximately {approx}-86 {mu}V/K at 800 K, yielding a power factor of {approx}2.5 x 10{sup -3} W/mK{sup 2}. This value is anomalously high for common transition-metal nitrides.

36 MATERIALS SCIENCE↗

Tunning of microstructure and thermoelectric properties of Ca{sub 3}Co{sub 4}O{sub 9} ceramics by high-magnetic-field sintering

The structural, magnetic, electrical, and thermal transport properties of Ca{sub 3}Co{sub 4}O{sub 9} ceramics sintered under high magnetic field were investigated. Crystal grain texturing and densification were achieved through cold-pressing and high-magnetic-field sintering techniques. The c-axis of the layered crystal grain was partly oriented along the c-axis of the pressed samples via a cold-pressing technique, and the degree of orientation was further increased while applying the magnetic field in the sample sintering progress. The easy magnetization axis of Ca{sub 3}Co{sub 4}O{sub 9} polycrystalline ceramics was found to be the c-axis. The room-temperature resistivity along the ab-plane of the sample sintered under 8 T magnetic field was about 30% smaller than that of the sample sintered without magnetic field, and the Seebeck coefficient of the former reached 177.7 {mu}V/K at the room temperature, which is about 50% larger than that of the latter. Consequently, for the sample sintered at 8 T magnetic field, the power factor along the ab-plane was enhanced by about 1.8 times compared to the sample without magnetic field sintering. The obtained result is suggested to originate from the variations of the carrier mobility and spin-orbital degeneracy due to high-magnetic-field sintering in the progress of the sample preparation.

36 MATERIALS SCIENCE↗