Search NASA⌕ Search

SEARCH · Search NASA

Results for “SINTERED INTERFACES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Improved photo-degradation of dyes over Ag-loaded NiTiO3:V nanorods on visible-light-irradiation

Highlights: • Ag/NiTiO{sub 3}:V nanorods were prepared by electrospinning synthesis. • The crystalline crystal structure was refined. • The optical absorption and band structure were clarified. • Photocatalysis was greatly enhanced in Ag/NiTiO{sub 3}:V nanorods. • The photocatalysis activities and mechanisms were discussed. - Abstract: Pure and V-doped NiTiO{sub 3} (NiTiO{sub 3}:V) nanorods were synthesized via electrospinning synthesis using sol–gel precursors, followed by sintering the samples at 600 °C. And the subsequent Ag-loaded NiTiO{sub 3}:V nanorods were prepared by the chemical precipitation method (Ag/NiTiO{sub 3}:V). The phase formations were studied via X-ray powder diffraction (XRD) measurements. The Rietveld refinements were conducted to investigate the structural characteristics. The surface property of the nanorods was measured via morphologies and X-ray photon spectrascope (XPS) measurements. The absorption spectra of products indicate sufficient optical response in visible wavelength region. The indirect allowed band gap (2.18 eV) of NiTiO{sub 3} originates from the characteristic charge-transfer (CT) transitions of O{sup 2−} → Ti{sup 4+} (UV region) and Ni{sup 2+} → Ti{sup 4+} (visible light region). While Ag/NiTiO{sub 3}:V composites have a smaller band energy of 2.09 eV. The photocatalytic activities were investigated by photo-degradation of Rhodamine B (RhB) dye solutions under visible-light irradiation. The Ag/NiTiO{sub 3}:V nanorods were efficient for the photo-degradation of RhB dye solutions. EIS measurements were used to analyze the charge-carrier migration at the interfaces. The improved photocatalysis of Ag/NiTiO{sub 3}:V is ascribed to the narrowed band energy and enhanced efficiencies of the charge separations due to the Ag-coupling and V-doping in NiTiO{sub 3} lattices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

PRODUCTION OF GLASS-TO-METAL SEALS USING ADDITIVE MANUFACTURING TECHNIQUES

Glass-to-metal (GtM) seals are hermetic barriers between glass and metal components, often used in the electronic and vacuum industries. Creating the seals traditionally requires heating all the components to the glass melting temperature, where the glass will flow and bond to the metal. Due to the manufacturing constraints of the individual components and sealing conditions there are geometric and material restrictions. Additive manufacturing techniques were used to make GtM seals to reduce these restrictions. Hermetic, single pin seals were produced using printed metal shells, by selective laser melting (SLM), and digital light processing (DLP) printed glass preforms. Glass preforms were printed with photosensitive resin mixed with a silicate sealing glass powder in a 1:2 weight ratio. Thermal analysis, TGA/DSC, and screening experiments were used to determine an organic removal schedule. Video techniques determined a sintering schedule by producing a densification curve at different isothermal holds which were fit with a viscous sintering model. Single pin seals were also produced use a laser assisted manufacturing (LAM) process as an alternative to the conventional furnace sealing process. A Nd:YAG laser was focused on a solid glass preform, heating the glass to form the glass-metal bond. The sealing glass was doped with a transition metal oxide, Fe2O3 or CuO, to increase absorption of the laser wavelength. The interface of hermetic LAM seals were analyzed using electron microscopy, compared to conventional prepared seals, finding a reduction of interfacial morphologies.

Read, Aaron Reece↗

3D printed transparent ceramic YAG laser rods: Matching the core-clad refractive index

Yttrium Aluminum Garnet (YAG) solid state laser gain media rods with an active Neodymium-doped core and an optically-clear cladding region were additively manufactured via direct-ink-writing (DIW), followed by sintering and hot isostatic pressing to form fully dense optical ceramics. Lutetium and Gadolinium were chosen as optically-inert co-doping ions in the clad to match the increase in refractive index caused by the Neodymium in the core. Additionally, either 11.6% Lutetium or 3.8% Gadolinium can be used to match the index change from 2% neodymium; however, differences in diffusion distances across the core-clad interface lead to large fluctuations in index in that region. These index fluctuations can be minimized either by matching dopants with similar diffusion distances, or by implementing a gradual gradient in the doping profile, possible through DIW, rather than a sharp compositional interface attainable via more standard fabrication methods. This improvement in index homogeneity resulted in a 40% improvement in lasing performance compared with that of a core-clad rod fabricated with a sharp interface between the doped and undoped regions.

36 MATERIALS SCIENCE↗

Interfacial characterization of alumina-to-alumina joints fabricated using silver–copper–titanium interlayers

Two Ag–Cu–Ti interlayers with different compositions (Ag–35.3Cu–1.75Ti and Ag–26.7Cu–4.5Ti) were used to join sintered polycrystalline Al{sub 2}O{sub 3} having different amounts of porosity to investigate the effect of titanium and porosity contents on evolution of interfacial chemistry and microstructures. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy dispersive spectroscopy (EDS) were used to characterize the interfacial microstructure. Two reaction layers, Ti{sub 2}O and Cu{sub 3}Ti{sub 3}O, were found at the interface of Ag–Cu–Ti interlayers and Al{sub 2}O{sub 3} using a series of simulated and experimental selected area diffraction patterns (SADP) of TEM and EDS. The total thickness of Ti{sub 2}O and Cu{sub 3}Ti{sub 3}O reaction layers at the interfaces increases with increasing amounts of Ti in the Ag–Cu–Ti interlayers but is independent of the porosity content in the Al{sub 2}O{sub 3}. Two possible formation mechanisms of Ti{sub 2}O and Cu{sub 3}Ti{sub 3}O reaction layers at the interface of Ag–Cu–Ti interlayers and Al{sub 2}O{sub 3} have been proposed based on the interfacial characterization performed in the present study. - Highlights: • Effect of alumina porosity and % Ti in interlayer on interface structure delineated • SEM, EDS, XRD, TEM with SADP used to delineate phases, compositions, crystallography • Ti{sub 2}O and Cu{sub 3}Ti{sub 3}O reaction layers identified and their formation mechanisms proposed.

36 MATERIALS SCIENCE↗

Flux Synthesis of A-site Disordered Perovskite La 0.5 M 0.5 TiO 3 (M$=$Li, Na, K) Nanorods Tailored for Solid Composite Electrolytes

Inorganic fillers play an important role in improving the ionic conductivity of solid composite electrolytes (SCEs) for Li-ion batteries. Among inorganic fillers, perovskite-type lithium lanthanum titanate (LLTO) stands out for its high bulk Li + conductivity on the order of 10 -3 S cm -1 at room temperature. According to a literature survey, the optimal LLTO filler should possess the following characteristics: i) a single-crystal structure to minimize grain boundaries; ii) a small particle size to increase the filler/polymer interface area; iii) a 1D morphology for efficient interface channels; and iv) cubic symmetry to facilitate rapid bulk Li + diffusion within the filler. However, the synthesis of single crystal, 1D LLTO nanomaterials with cubic symmetry is challenging. Herein, a flux strategy is developed to synthesize La 0.5 M 0.5 TiO 3 (LMTO, M$=$Li, Na, and K) single-crystal nanorods with an A-site-disordered, cubic perovskite phase. The flux media promotes the oriented growth of nanorods, prevents nanorods from sintering, and provides multiple alkali metal ion doping at M sites to stabilize the cubic phase. SCEs compositing the Li + -conducting LMTO nanorods as fillers and poly[vinylene carbonate- co -lithium sulfonyl(trifluoromethane sulfonyl)imide methacrylate] matrix exhibit more than twice the conductivity of the neat polymer electrolyte (30.6 vs 14.0 µS cm -1 at 303 K).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Constructing high-performance radiation-resistant ternary YSZ-MgO-CNT nanocomposites via tailored nanostructures

Developing long-lifetime bulk-form ceramic-based materials with high irradiation resistance is crucial for advanced nuclear systems. Here, we incorporated carbon nanotubes (CNTs) into yttria-stabilized zirconia (YSZ) and magnesia (MgO) nanocrystals to fabricate bulk YSZ-MgO-CNT nanocomposites with abundant ternary nanostructures by spark plasma sintering. To understand the role of tailored ternary nanostructure on irradiation, we investigated the microstructure and mechanical properties evolutions of the YSZ-MgO-CNT nanocomposites irradiated by multi-energy He + ions at high temperature to different fluences. Compared with the single-phase YSZ and ultrafine-grained YSZ-MgO composites, the YSZ-MgO-CNT nanocomposites possessed higher ability to manage irradiation-induced He bubbles/defects via the defect-interface interactions of proposed “loading-unloading” and “loading-transporting-unloading” mechanisms for controlling the dynamical behaviors of He atoms/defects in the CNT-doped ternary nanostructures, thereby presenting more stable microstructure and better performance in resisting irradiation hardening. In conclusion, this work provides insight into the design of advanced inert matrix nuclear fuel and new nuclear waste management materials.

36 MATERIALS SCIENCE↗

The GdF3 phosphors with enhanced multicolor luminescence via multi-channel excitation and energy migration procedure

Highlights: • Core-shell structured GdF{sub 3} phosphors were synthesized by hydrothermal method. • SiO{sub 2} coating layers prevent aggregation and sintering during thermal annealing. • The annealed CSS nanophosphors were highly dispersible. • The inserted PMA significantly enhances multicolor luminescence. • The annealed CSS phosphors exhibit enhanced multicolor luminescence properties. - Abstract: A collection of GdF{sub 3} core-shell structured (CSS) phosphors were synthesized by hydrothermal method. The as-prepared (AP) phosphors were coated with SiO{sub 2} layers to avoid aggregation and sintering during thermal annealing at 800 °C, after which the SiO{sub 2} layers were etched off and the annealed phosphors became highly dispersible. The annealed CSS phosphor aGdF{sub 3}:Eu{sup 3+}@GdF{sub 3}:Ce{sup 3+},Dy{sup 3+} shows excellent multicolor luminescence performance with the aid of dual-channel excitation and energy migration (EM) procedure of Gd{sup 3+} ions. By inserting pyromellitic acid (PMA) organic ligands into the interfaces between annealed core and AP shell layer regions, the so-called antenna effect of organic ligands of PMA forms a new excitation channel, which makes the CSS phosphor aGdF{sub 3}:Eu{sup 3+}@PMA@GdF{sub 3}:Ce{sup 3+},Dy{sup 3+} exhibit significantly enhanced multicolor luminescence via multi-channel excitation and EM process. The prepared CSS phosphors in this work are excellent candidates for applications in solid-state lighting.

36 MATERIALS SCIENCE↗

Temperature-induced hexagonal–orthorhombic phase transition in lutetium ferrite nanoparticles

The x-ray diffraction, Raman, and infrared spectroscopies and magnetic measurements were used to explore the correlated changes of the structure, lattice dynamics, and magnetic properties of the LuFeO3 nanoparticles, which appear in dependence on their sintering temperature. We revealed a gradual substitution of the hexagonal phase by the orthorhombic phase in the nanoparticles, with sintering temperature increasing from 700 to 1100 °C. The origin and stability of the hexagonal phase in the LuFeO3 nanoparticles are of the special interest, because the nanoparticles in the phase can be a room-temperature multiferroic with a weak ferromagnetic and pronounced structural and ferroelectric long-range ordering. The antiferromagnetic and nonpolar orthorhombic phase is more stable in the bulk LuFeO3. To define the ranges of the hexagonal phase stability, we determine the bulk and interface energy densities of different phases from the comparison of the Gibbs model with experimental results. Using effective parameters of the Gibbs model, we predict the influence of size effects and temperature on the structural and polar properties of the LuFeO3 nanoparticles. Analysis of the obtained results shows that the combination of the x-ray diffraction, Raman and infrared spectroscopies, magnetic measurements, and theoretical modeling of structural and polar properties allows us to establish the interplay between the phase composition, lattice dynamics, and multiferroic properties of the LuFeO3 nanoparticles prepared under different conditions.

Materials Science↗

A general mechanism for stabilizing the small sizes of precious metal nanoparticles on oxide supports

We recently discovered that MgAl2O4 spinel {111} nano-facets optimally stabilize the small sizes of platinum nanoparticles even after severe high temperature aging treatments. Here we report the thermal stabilities of other precious metals with various physical and chemical properties on the MgAl2O4 spinel {111} facets, providing important new insights into the stabilization mechanisms. Besides Pt, Rh and Ir can also be successfully stabilized as small (1-3 nm) nanoparticles and even as single atomic species after extremely severe (800 °C, 1 week) oxidative aging. However, other metals either aggregate (Ru, Pd, Ag, and Au) or sublimate (Os) even during initial catalyst synthesis. On the basis of ab initio theoretical calculations and experimental observations, we rationalize that the exceptional stabilization originates from lattice matching, and the correspondingly strong attractive interactions at interfaces between the spinel {111} surface oxygens and epitaxial metals\metal oxides. On this basis, design principles for catalyst support oxide materials that are capable in stabilizing precious metals are proposed.

anti-sintering↗

Effect of Ni content in Cu 1-x Ni x coating on microstructure evolution and mechanical properties of W/Mo joint via low-temperature diffusion bonding

The 93W and Mo1 refractory metals were bonded with different Cu 1- x Ni x coating interlayers of various Ni content using plasma-activated sintering at 700 °C. The effects of the Ni content in the Cu 1- x Ni x coating interlayer on the interfacial microstructure evolution and mechanical properties of the W/Mo joints were studied. The maximum average shear strength of the W/Mo joint was 316.5 MPa when the Ni content of the Cu 1- x Ni x coating interlayer was 25 %. When the Ni content of the Cu 1- x Ni x coating interlayer was below 50 %, the atomic diffusion at the W/Mo joint interface was adequate without the formation of intermetallic compounds, as demonstrated by the High Resolution Transmission Electron Microscope analyses of the joints. The presence of Ni in Cu 1- x Ni x promoted diffusion bonding at the interface, which contributed to the high mechanical properties of the W/Mo joint. With an increase in the Ni content of the Cu 1- x Ni x coating interlayer, the MoNi intermetallic compound (IMC) nucleated and grew at the Cu 1- x Ni x coating/Mo1 interface. When the Ni content of the Cu 1- x Ni x coating interlayer was above 50 %, the generation of a brittle MoNi IMC weakened the shear strength of the W/Mo joint dramatically.

36 MATERIALS SCIENCE↗

Multi-scale characterization of pore evolution in a combustion metamorphic complex, Hatrurim basin, Israel: Combining (ultra) small-angle neutron scattering and image analysis

Backscattered scanning electron micrograph and ultra small- and small-angle neutron scattering data have been combined to provide statistically meaningful data on the pore/grain structure and pore evolution of combustion metamorphic complexes from the Hatrurim basin, Israel. Three processes, anti-sintering roughening, alteration of protolith (dehydration, decarbonation, and oxidation) and crystallization of high-temperature minerals, occurred simultaneously, leading to significant changes in observed pore/grain structures. Pore structures in the protoliths, and in lowand high-grade metamorphic rocks show surface (Ds) and mass (Dm) pore fractal geometries with gradual increases in both Ds and Dm values as a function of metamorphic grade. This suggests that increases in pore volume and formation of less branching pore networks are accompanied by a roughening of pore/grain interfaces. Additionally, pore evolution during combustion metamorphism is also characterized by reduced contributions from small-scale pores to the cumulative porosity in the high-grade rocks. At high temperatures, small-scale pores may be preferentially closed by the formation of high-temperature minerals, producing a rougher morphology with increasing temperature. Alternatively, large-scale pores may develop at the expense of small-scale pores. These observations (pore fractal geometry and cumulative porosity) indicate that the evolution of pore/grain structures is correlated with the growth of high-temperature phases and is a consequence of the energy balance between pore/grain surface energy and energy arising from heterogeneous phase contacts. The apparent pore volume density further suggests that the localized time/temperature development of the high-grade Hatrurim rocks is not simply an extension of that of the low-grade rocks. The former likely represents the "hot spots (burning foci)" in the overall metamorphic terrain while the latter may represent contact aureoles.

Wang, Hsiu-Wen↗

Joining of beta-SiC by spark plasma sintering

Spark plasma sintering (SPS) was employed to join monolithic -SiC with or without titanium as intermediate joining material. Both the localizedand rapid heating contributed to the inherent energy saving of electric current assisted joining technique. The effects of uniaxial pressure and surfacepreparation were analyzed independently with respect to the flexural strength and the morphology of the joints. In particular samples polisheddown to 1 m and joined at 1900 C for 5 min achieved the strength of the as received material. The failure occurred outside the joining interface,confirming the optimum quality of the joint. Pressure in combination with surface preparation was necessary to achieve perfect adhesion and porefree direct joining of SiC. The use of Ti foil as a joining material and pressure allowed joining of unpolished SiC.

Grasso, Salvatore↗

Development of Diffusion Barrier Coatings and Deposition Technologies for Mitigating Fuel Cladding Chemical Interactions (FCCI)

The goal of this project is to develop diffusion barrier coatings on the inner cladding surface to mitigate fuel-cladding chemical interaction (FCCI). FCCI occurs due to thermal and radiation enhanced inter-diffusion between the cladding and fuel materials, and can have the detrimental effects of reducing the effective cladding wall thickness and lowering the melting points of the fuel and cladding. The research is aimed at the Advanced Burner Reactor (ABR), a sodium-cooled fast reactor, in which higher burn-ups will exacerbate the FCCI problem. This project will study both diffusion barrier coating materials and deposition technologies. Researchers will investigate pure vanadium, zirconium, and titanium metals, along with their respective oxides, on substrates of HT-9, T91, and oxide dispersion-strengthened (ODS) steels; these materials are leading candidates for ABR fuel cladding. To test the efficacy of the coating materials, the research team will perform high-temperature diffusion couple studies using both a prototypic metallic uranium fuel and a surrogate the rare-earth element lanthanum. Ion irradiation experiments will test the stability of the coating and the coating-cladding interface. A critical technological challenge is the ability to deposit uniform coatings on the inner surface of cladding. The team will develop a promising non-line-of-sight approach that uses nanofluids . Recent research has shown the feasibility of this simple yet novel approach to deposit coatings on test flats and inside small sections of claddings. Two approaches will be investigated: 1) modified electrophoretic deposition (MEPD) and 2) boiling nanofluids. The coatings will be evaluated in the as-deposited condition and after sintering.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Low lattice thermal conductivity in Pb 5 Bi 6 Se 14 , Pb 3 Bi 2 S 6 , and PbBi 2 S 4 : promising thermoelectric materials in the cannizzarite, lillianite, and galenobismuthite homologous series

The thermoelectric properties of Pb5Bi6Se14, a member of the cannizzarite homologous series; Pb3Bi2S6, a member of the lillianite homologous series; and PbBi2S4, a member of the galenobismuthite homologous series were investigated over the temperature range of 300 K to 723 K. The samples were synthesized by a solid state reaction of the binary precursors PbQ and Bi(2)Q(3) (Q = S and Se) in evacuated and sealed quartz tubes, followed by pulsed electric current sintering. The crystal structure of Pb5Bi6Se14 consists of alternating two-dimensional infinite layers of PbSe and Bi2Se3. In the Pb5Bi6Se14 sintered compacts, the ab-plane was preferentially oriented perpendicular to the pressing direction, resulting in highly anisotropic electrical and thermal transport properties. The crystal structure of Pb3Bi2S6 is formed by stacking NaCl-type (Pb/Bi) S layers with a mirror as twinning operation, while that of PbBi2S4 consists of the NaCl-type and Bi2S3-type strips (broken layers) of finite widths. The crystal grains of Pb3Bi2S6 and PbBi2S4 were grown randomly, leading to nearly isotropic electrical and thermal transport properties in the sintered compacts. For all the samples, an n-type degenerate semiconductor-like behavior was found, providing a notable thermoelectric power factor of similar to 3.0 mu W K-2 cm(-1) at 705 K for Pb5Bi6Se14, similar to 2.4 mu W K-2 cm(-1) at 715 K for Pb3Bi2S6, and similar to 2.6 mu W K-2 cm(-1) at 515 K for PbBi2S4 in a direction perpendicular to the pressing direction. Moreover, these materials exhibited effective phonon scattering, presumably at the interfaces between the layers, leading to extremely low lattice thermal conductivity in the range of 0.29 W K-1 m(-1) to 0.80 W K-1 m(-1) over the temperature range of 300 K to 723 K. The highest ZT of similar to 0.46 at 705 K was observed in Pb5Bi6Se14 for the ab-plane direction.

Ohta, Michihiro↗

Effect of TiN Addition on 3Y-TZP Ceramics with Emphasis on Making EDM-Able Bodies

In this study, to produce electrically conductive ceramics, rapid hot press (RHP) sintering of 3 mol.% yttria-stabilized tetragonal zirconia polycrystal (3Y-TZP) and 3Y-TZP/TiN composites with TiN amounts of 25, 35, and 45 vol.% was performed at 1300, 1350, and 1400 °C. Interestingly, the toughness and hardness were improved in the presence of TiN up to 35 vol.% and maximum fracture toughness and hardness of 5.40 ± 0.05 MPa m{sup 1/2} and 14.50 ± 0.06 GPa, respectively, were obtained. However, the bending strength was decreased which could be attributed to the rather weak interfaces of nitride and oxide phases. Regarding the zirconia matrix, the effect of grain size on fracture toughness of the samples has been studied using x-ray diffraction and field emission scanning electron microscope (FESEM) analysis. It was also found that electrical resistivity decreased to the value of 6.88 × 10{sup −6} Ω m at 45 vol.% of TiN. It seems the TiN grains form a network to impose conductivity on the ZrO{sub 2} body; however, below 35 vol.% TiN, due to lack of percolation effect, this conductivity could not be maintained according to FESEM studies. Finally, electrically conductive samples were successfully machined by electrical discharge machining (EDM).

36 MATERIALS SCIENCE↗

Enhanced photovoltaic performance of nanocrystalline CdTe/ZnO solar cells using sol-gel ZnO and positive bias treatment

The effect of doping and porosity of the n-type ZnO layer on the performance of solution-processed, sintered p-CdTe/n-ZnO nanocrystal photovoltaic (PV) devices is investigated. Amorphous sol-gel ZnO is found to be the best candidate with overall energy conversion efficiencies above 8% obtained if the ZnO is also indium doped. We demonstrate that when such PV devices are left under forward bias (in dark or light), the device efficiency values are raised to at least 9.8%, due to a substantially increased open-circuit voltage and fill-factor. This drastic enhancement is attributed to improved band alignment at the ITO/CdTe interface. The forward-bias treatment is slowly reversed over a period of days to weeks on standing under open circuit conditions, but is readily restored with further voltage treatment. The moderate processing conditions and high efficiency of such devices demonstrate that nanocrystal-based systems are a promising technology for photovoltaics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impact on aggregate/matrix bonding when a refractory contains zinc aluminate instead of spinel and magnesia‐chrome

The high hot strength of MgO–Cr 2 O 3 refractory is often ascribed to its intimate aggregate/matrix bonding. For a fundamental comparison with it, ~2 mm aggregates of MgO and Al 2 O 3 were separately embedded in ZnAl 2 O 4 and MgAl 2 O 4 matrices, sintered at 1600°C, and examined. It was found that similarity of thermal expansion coefficient (TEC) between the aggregate and the matrix is critical to achieve good bonding and this is more important than the extent of interdiffusion. The TEC mismatch of ≥ 5.7 × 10 -6 K -1 caused significant undesirable debonding in MgO aggregate/MgAl 2 O 4 matrix sample and MgO/ZnAl 2 O 4 despite >736 μm Zn 2+ diffusion depth in the latter. Direct bonding, as inferred from a thicker interfacial reaction layer and a greater shift of the aggregate/matrix interface before and after firing, was better in MgAl 2 O 4 /ZnAl 2 O 4 combination, followed by tabular Al 2 O 3 /ZnAl 2 O 4 and Al 2 O 3 /MgAl 2 O 4 . Powder X-ray diffraction indicated that the volatilization of ZnAl 2 O 4 at 1600°C in air was negligible compared to MgO–Cr 2 O 3 .

36 MATERIALS SCIENCE↗

Radiation Effects on High Thermal Conductivity Fuels (Final Scientific Report)

High thermal conductivity nuclear fuels offer important potential advantages over traditional oxide-based fuels such as higher burnup, reduction in fission gas release, and better overall safety of the reactor system. One interesting approach to high thermal conductivity fuels utilizes high thermal conductivity nonfissile additives to UO 2 fuel to lower the fuel operating temperature and thereby take advantage of the highly favorable radiation resistance of UO 2 at lower operating temperatures. However, differential swelling between the matrix and high conductivity additive phases during high dose irradiation could lead to internal cracking and poor performance. In the current study, ceria (CeO 2 ) and zirconia (ZrO 2 ) surrogate matrices were used to model UO 2 behavior. Al 2 O 3 or SiC in the form of nanoscale powder or platelets, respectively, were used for the high conductivity second phase. The nuclear fuel surrogates were sintered to achieve densities greater than 93% of the ideal values. Scanning electron microscopy (SEM) imaging and X-ray diffraction confirmed the uniform distribution of the second phase and that no intermetallic second phase was formed during sintering. The thermal conductivity of the sintered samples was measured from 50°C to 900°C and revealed an important increase compared to pure CeO2 and ZrO2 pellets. Samples were irradiated with 20 MeV Ni6+ ions at midrange doses ranging from 1 to 15 displacements per atom (dpa) and temperatures from 300°C to 700°C. Post irradiation characterization revealed a good stability of the samples at low to medium doses (1 to 5 dpa) but showed a significant microstructural deterioration and decrease of the mechanical properties at 15 dpa. Although microcracking is not observed at the interface between the matrix and high conductivity phase for any investigated irradiation condition, the strength degradation at 15 dpa suggests that these high thermal conductivity fuel forms may not be suitable for high burnup applications in current or proposed fission reactors.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗