Search NASA⌕ Search

SEARCH · Search NASA

Results for “STACKS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Basin-scale study of CO 2 storage in stacked sequence of geological formations

Commercial scale decarbonization through carbon capture and storage may likely involve many CO 2 storage projects located in close proximity. The close proximity could raise concerns over caprock integrity associated with reservoir pressure buildup and interference among adjacent projects. Commercial-scale injection will also require large prospective CO 2 storage resource and high injectivity in the targeted storage formations. To accommodate the need for both large resource and high injectivity, project operators could consider injecting CO 2 into a stacked sequence of formations. This analysis investigates the benefits of injecting CO 2 into a vertically stacked sequence of saline formations, over injecting the same amount of CO 2 into a single saline formation, in addressing these challenges. Our analysis shows that injecting into the stacked sequence mitigates the extent of pressure buildup among the stacked formations, while still achieving the same or greater target CO 2 storage volumes. Among cases modeled, the resulting pressure buildup front is most reduced when each storage site distributes injection volumes over several wells, each of which injects a portion of the total CO 2 mass across the stacked sequence. This favorable case not only results in the smallest CO 2 aerial footprint, but also shows the largest reduction in the pressure buildup at the top of perforation at the injection wells (upwards of approximately 46% compared to the single-formation storage), the result of which is crucial to maintain caprock integrity. This analysis provides insights into required decision-making when considering multi-project deployment in a shared basin.

42 ENGINEERING↗

Numerical analysis of ac loss in bifilar stacks and coils of ion beam assisted deposition YBCO coated conductors

In this paper we present a finite element model using the commercial COMSOL software package for calculating the ac loss in bifilar stacks of high temperature superconducting tape. In the model, the current-voltage relationship characterizing the superconducting properties is assumed to follow a power law. The calculations were performed for infinite bifilar stacks with different values of layer-to-layer separation D. With appropriate settings for the boundary conditions, the numerical results agree well with the analytical data obtained from a recently proposed model [J. R. Clem, Phys. Rev. B 77, 134506 (2008)]. The numerical approach was also used to investigate the end effects in a bifilar stack to answer the following question: how many layers away from the end of a stack are required before the environment of a given layer is identical to that in an infinite stack? We find that the answer to this question depends strongly on the value of D. Based on this study, a model for calculating the ac loss in bifilar noninductively wound coils with a finite number of turns is proposed.

36 MATERIALS SCIENCE↗

Influence of the SiO{sub 2} interlayer thickness on the density and polarity of charges in Si/SiO{sub 2}/Al{sub 2}O{sub 3} stacks as studied by optical second-harmonic generation

By accurately tuning the SiO{sub 2} interlayer thickness the density and polarity of charges in Si/SiO{sub 2}/Al{sub 2}O{sub 3} stacks can be controlled. We report on the number density, polarity, and physical location of charges present in the stacks as studied by optical second-harmonic generation (SHG). Depending on the SiO{sub 2} interlayer thickness (1–150 nm) the effective charge density in the Si/SiO{sub 2}/Al{sub 2}O{sub 3} stacks ranges from 10{sup 13} to 10{sup 11} cm{sup −2} for both n- and p-type silicon. The polarity of the charges switches from negative to positive around a SiO{sub 2} interlayer thickness of 5–10 nm at which point the effective charge density in the stacks is negligible. This switch in polarity is apparent from spectroscopic, time-dependent, and azimuthal SHG measurements. The observed trends in charge density and polarity can be explained by tunneling of electrons into defect states at the SiO{sub 2}/Al{sub 2}O{sub 3} interface as well as the presence of fixed and bulk charges at the Si/SiO{sub 2} interface and in the SiO{sub 2}, respectively. This charge mechanism appears to hold generally for Si/SiO{sub 2}/Al{sub 2}O{sub 3} stacks as similar results were observed for SiO{sub 2} films prepared by various techniques.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mutual synchronization of two stacks of intrinsic Josephson junctions in cuprate superconductors

Certain high-T{sub c} cuprate superconductors, which naturally realize a stack of Josephson junctions, thus can be used to generate electromagnetic waves in the terahertz region. A plate-like single crystal with 10{sup 4} junctions without cavity resonance was proposed to achieve strong radiation. For this purpose, it is required to synchronize the Josephson plasma oscillation in all junctions. In this work, we propose to use two stacks of junctions shunted in parallel to achieve synchronization. The two stacks are mutually synchronized in the whole IV curve, and there is a phase shift between the plasma oscillation in the two stacks. The phase shift is nonzero when the number of junctions in different stacks is the same, while it can be arbitrary when the number of junctions is different. This phase shift can be tuned continuously by applying a magnetic field when all the junctions are connected by superconducting wires.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Polarization-insensitive optical gain characteristics of highly stacked InAs/GaAs quantum dots

The polarized optical gain characteristics of highly stacked InAs/GaAs quantum dots (QDs) with a thin spacer layer fabricated on an n{sup +}-GaAs (001) substrate were studied in the sub-threshold gain region. Using a 4.0-nm-thick spacer layer, we realized an electronically coupled QD superlattice structure along the stacking direction, which enabled the enhancement of the optical gain of the [001] transverse-magnetic (TM) polarization component. We systematically studied the polarized electroluminescence properties of laser devices containing 30 and 40 stacked InAs/GaAs QDs. The net modal gain was analyzed using the Hakki-Paoli method. Owing to the in-plane shape anisotropy of QDs, the polarization sensitivity of the gain depends on the waveguide direction. The gain showing polarization isotropy between the TM and transverse-electric polarization components is high for the [110] waveguide structure, which occurs for higher amounts of stacked QDs. Conversely, the isotropy of the [−110] waveguide is easily achieved even if the stacking is relatively low, although the gain is small.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optimized scalable stack of fluorescent solar concentrator systems with bifacial silicon solar cells

In this paper, we present a concentrator system based on a stack of fluorescent concentrators (FCs) and a bifacial solar cell. Coupling bifacial solar cells to a stack of FCs increases the performance of the system and preserves its efficiency when scaled. We used an approach to optimize a fluorescent solar concentrator system design based on a stack of multiple fluorescent concentrators (FC). Seven individual fluorescent collectors (20 mm×20 mm×2 mm) were realized by in-situ polymerization and optically characterized in regard to their ability to guide light to the edges. Then, an optimization procedure based on the experimental data of the individual FCs was carried out to determine the stack configuration that maximizes the total number of photons leaving edges. Finally, two fluorescent concentrator systems were realized by attaching bifacial silicon solar cells to the optimized FC stacks: a conventional system, where FC were attached to one side of the solar cell as a reference, and the proposed bifacial configuration. It was found that for the same overall FC area, the bifacial configuration increases the short-circuit current by a factor of 2.2, which is also in agreement with theoretical considerations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A dilute Cu(Ni) alloy for synthesis of large-area Bernal stacked bilayer graphene using atmospheric pressure chemical vapour deposition

A bilayer graphene film obtained on copper (Cu) foil is known to have a significant fraction of non-Bernal (AB) stacking and on copper/nickel (Cu/Ni) thin films is known to grow over a large-area with AB stacking. In this study, annealed Cu foils for graphene growth were doped with small concentrations of Ni to obtain dilute Cu(Ni) alloys in which the hydrocarbon decomposition rate of Cu will be enhanced by Ni during synthesis of large-area AB-stacked bilayer graphene using atmospheric pressure chemical vapour deposition. The Ni doped concentration and the Ni homogeneous distribution in Cu foil were confirmed with inductively coupled plasma optical emission spectrometry and proton-induced X-ray emission. An electron backscatter diffraction map showed that Cu foils have a single (001) surface orientation which leads to a uniform growth rate on Cu surface in early stages of graphene growth and also leads to a uniform Ni surface concentration distribution through segregation kinetics. The increase in Ni surface concentration in foils was investigated with time-of-flight secondary ion mass spectrometry. The quality of graphene, the number of graphene layers, and the layers stacking order in synthesized bilayer graphene films were confirmed by Raman and electron diffraction measurements. A four point probe station was used to measure the sheet resistance of graphene films. As compared to Cu foil, the prepared dilute Cu(Ni) alloy demonstrated the good capability of growing large-area AB-stacked bilayer graphene film by increasing Ni content in Cu surface layer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

THE FAINT STELLAR HALOS OF MASSIVE RED GALAXIES FROM STACKS OF MORE THAN 42,000 SDSS LRG IMAGES

We study the properties of massive galaxies at an average redshift of z {approx} 0.34 through stacking more than 42,000 images of luminous red galaxies (LRGs) from the Sloan Digital Sky Survey (SDSS). This is the largest data set ever used for such an analysis and it allows us to explore the outskirts of massive red galaxies at unprecedented physical scales. Our image stacks extend farther than 400 kpc, where the r-band profile surface brightness reaches 30 mag arcsec{sup -2}. This analysis confirms that the stellar bodies of LRGs follow a simple Sersic profile out to 100 kpc. At larger radii, the profiles deviate from the best-fit Sersic models and exhibit extra light in the r-, i-, and z-band stacks. This excess light can probably be attributed to unresolved intragroup or intracluster light or a change in the light profile itself. We further show that standard analyses of SDSS-depth images typically miss 20% of the total stellar light and underestimate the size of LRGs by 10% compared to our best-fit r-band Sersic model of n = 5.5 and r{sub e} = 13.1 kpc. If the excess light at r > 100 kpc is considered to be part of the galaxy, the best-fit r-band Sersic parameters are n = 5.8 and r{sub e} = 13.6 kpc. In addition, we study the radially dependent stack ellipticity and find an increase with radius from {epsilon} = 0.25 at r = 10 kpc to {epsilon} = 0.3 at r = 100 kpc. This provides support that the stellar light that we trace out to at least 100 kpc is physically associated with the galaxies themselves and may confirm that the halos of individual LRGs have higher ellipticities than their central parts. Lastly, we show that the broadband color gradients of the stacked images are flat beyond roughly 40 kpc, suggesting that the stellar populations do not vary significantly with radius in the outer parts of massive ellipticals.

79 ASTRONOMY AND ASTROPHYSICS↗

RADIO STACKING REVEALS EVIDENCE FOR STAR FORMATION IN THE HOST GALAXIES OF X-RAY-SELECTED ACTIVE GALACTIC NUCLEI AT z < 1

Nuclear starbursts may contribute to the obscuration of active galactic nuclei (AGNs). The predicted star formation rates (SFRs) are modest, and, for the obscured AGNs that form the X-ray background at z < 1, the associated faint radio emission lies just beyond the sensitivity limits of the deepest surveys. Here, we search for this level of star formation by studying a sample of 359 X-ray-selected AGNs at z < 1 from the Cosmic Evolution Survey field that are not detected by current radio surveys. The AGNs are separated into bins based on redshift, X-ray luminosity, obscuration, and mid-infrared characteristics. An estimate of the AGN contribution to the radio flux density is subtracted from each radio image, and the images are then stacked to uncover any residual faint radio flux density. All of the bins containing 24 {mu}m detected AGNs are detected with a signal-to-noise >3{sigma} in the stacked radio images. In contrast, AGNs not detected at 24 {mu}m are not detected in the resulting stacked radio images. This result provides strong evidence that the stacked radio signals are likely associated with star formation. The estimated SFRs derived from the radio stacks range from 3 M{sub Sun} yr{sup -1} to 29 M{sub Sun} yr{sup -1}. Although it is not possible to associate the radio emission with a specific region of the host galaxies, these results are consistent with the predictions of nuclear starburst disks in AGN host galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Degree of polarization and source counts of faint radio sources from Stacking Polarized intensity

We present stacking polarized intensity as a means to study the polarization of sources that are too faint to be detected individually in surveys of polarized radio sources. Stacking offers not only high sensitivity to the median signal of a class of radio sources, but also avoids a detection threshold in polarized intensity, and therefore an arbitrary exclusion of sources with a low percentage of polarization. Correction for polarization bias is done through a Monte Carlo analysis and tested on a simulated survey. We show that the nonlinear relation between the real polarized signal and the detected signal requires knowledge of the shape of the distribution of fractional polarization, which we constrain using the ratio of the upper quartile to the lower quartile of the distribution of stacked polarized intensities. Stacking polarized intensity for NRAO VLA Sky Survey (NVSS) sources down to the detection limit in Stokes I, we find a gradual increase in median fractional polarization that is consistent with a trend that was noticed before for bright NVSS sources, but is much more gradual than found by previous deep surveys of radio polarization. Consequently, the polarized radio source counts derived from our stacking experiment predict fewer polarized radio sources for future surveys with the Square Kilometre Array and its pathfinders.

79 ASTRONOMY AND ASTROPHYSICS↗

Measurement of Transverse Resistance for Stacks of Non-insulated REBCO Tapes

Transverse resistance among adjacent conductors is a key parameter to calculate AC losses in superconducting cables with non-insulated conductors. The transverse pressure insert (TPI) previously developed and used at Fermilab was modified to measure transverse resistance of stacks made of non-insulated REBCO tapes as a function of transverse pressure at liquid nitrogen temperature. Pressure up to 322 MPa was applied with a hydraulic cylinder. A small current up to 10 A was flown in the stack sample through REBCO tape leads spliced above and below the stack. The latter had a bending radius larger than 6 mm to prevent the critical current degradation in REBCO leads. The voltage was measured just outside the compressed area. Stack samples included stacks of bare 4-mm wide REBCO tapes, as well as REBCO tapes alternated with 4-mm wide stainless-steel ribbons of 40 μm and 30 μm of thickness. We herein present the results of these transverse resistance measurements. Results show a stronger dependence on pressure for smaller pressure vs. larger ones. Also, of the two components of contact resistance, i.e. contact and bulk, the latter was negligible.

Tamagnini, E. [Turin Polytechnic]↗

Stacked CMB lensing and ISW signals around superstructures in the DESI Legacy Survey

The imprints of large-scale structures on the Cosmic Microwave Background (CMB) can be studied via the CMB lensing and Integrated Sachs–Wolfe (ISW) signals. In particular, the stacked ISW signal around supervoids has been claimed in several works to be anomalously high. In this study, we find cluster and void superstructures using four tomographic redshift bins with 0 < z < 0.8 from the DESI Legacy Survey and measure the stacked CMB lensing and ISW signals around them. To compare our measurements with ΛCDM model predictions, we construct a mock catalogue with matched galaxy number density and bias and apply the same photo-z uncertainty as the data. The consistency between the mock and the data is verified via the stacked galaxy density profiles around the superstructures and their quantity. The corresponding lensing convergence and ISW maps are then constructed and compared. The stacked lensing signal agrees with data well except at the highest redshift bin in density peaks, where the mock prediction is significantly higher, by approximately a factor of 1.3. The stacked ISW signal is generally consistent with the mock prediction. We do not obtain a significant signal from voids, A ISW = -0.10 ± 0.69, and the signal from clusters, A ISW = 1.52 ± 0.72, is at best weakly detected. However, these results are strongly inconsistent with previous claims of ISW signals at many times the level of the ΛCDM prediction. We discuss the comparison of our results with past work in this area and investigate possible explanations for this discrepancy.

79 ASTRONOMY AND ASTROPHYSICS↗

Role of stacking defects on the magnetic behavior of CrCl 3

Here, in the study of van der Waals–layered magnetic materials, the properties of CrCl 3 continue to attract attention. This compound is reported to undergo antiferromagnetic ordering below ~14 K, with a ferromagneticlike region proposed to exist between 14 and 17 K. Ideally, the crystal structure is rhombohedral (R) below ~235 K, separated from a higher-temperature monoclinic (M) phase by a layer-sliding structural phase transition. However, the structural transition is often inhibited even in bulk single crystals, allowing M-type layer stacking, reported to have a 10-fold greater interlayer magnetic coupling than R-type stacking, to be present at low temperature. To clarify the effect of stacking defects on CrCl 3 , we report magnetization measurements on samples of varying crystalline quality. At low applied magnetic field, some crystals predominantly show the T N = 14 K peak, but other crystals show hysteretic behavior and a magnetization enhancement at a slightly higher temperature (14 < T ≲ 17 K.) Samples with anomalous behavior exhibit a transition around ~2 T in isothermal magnetization-field data, evidence that M-type stacking defects are the source of these anomalies. Ground powder samples are especially likely to show strongly anomalous behavior. We suggest that the anomalous behavior arises from few-layer magnetic domains that form just above T N in an environment of mixed interlayer magnetic coupling strength. We argue that the influence of M-type stacking boundaries on sublattice magnetization is already observable in reported neutron scattering data, and may be responsible for an enhancement near 17 K in reported specific heat data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Tunable and laser-reconfigurable 2D heterocrystals obtained by epitaxial stacking of crystallographically incommensurate Bi 2 Se 3 and MoS 2 atomic layers

Vertical stacking is widely viewed as a promising approach for designing advanced functionalities using two-dimensional (2D) materials. Combining crystallographically commensurate materials in these 2D stacks has been shown to result in rich new electronic structure, magnetotransport, and optical properties. In this context, vertical stacks of crystallographically incommensurate 2D materials with well-defined crystallographic order are a counterintuitive concept and, hence, fundamentally intriguing. We show that crystallographically dissimilar and incommensurate atomically thin MoS 2 and Bi 2 Se 3 layers can form rotationally aligned stacks with long-range crystallographic order. Our first-principles theoretical modeling predicts heterocrystal electronic band structures, which are quite distinct from those of the parent crystals, characterized with an indirect bandgap. Experiments reveal striking optical changes when Bi 2 Se 3 is stacked layer by layer on monolayer MoS 2 , including 100% photoluminescence (PL) suppression, tunable transmittance edge (1.1→0.75 eV), suppressed Raman, and wide-band evolution of spectral transmittance. Disrupting the interface using a focused laser results in a marked the reversal of PL, Raman, and transmittance, demonstrating for the first time that in situ manipulation of interfaces can enable “reconfigurable” 2D materials. We demonstrate submicrometer resolution, “laser-drawing” and “bit-writing,” and novel laser-induced broadband light emission in these heterocrystal sheets.

36 MATERIALS SCIENCE↗

Physical Sciences Laboratory 1 Rooftop Stack Mixing Study

To address concerns about worker exposures on the Physical Science Laboratory (PSL) rooftop, a tracer study was conducted to measure gaseous tracer concentrations downwind of six stacks on the southern half of the PSL building (PSL-1). These concerns were raised, in part, due to the non-standard configuration of the stacks on this building. Five of the six stacks were only about 8 feet tall, with one shorter stack that was essentially level with the roof deck. These stacks were reconfigured in August 2016, and these exhaust points on PSL-1 are now 18 feet tall. This report describes the objectives of the tracer tests performed on PSL-1, provides an overview of how the tests were executed, and presents results of the tests. The tests on the PSL rooftop were a follow-on project from a similar study performed on the LSL-II ventilation exhaust (Flaherty and Antonio, 2016).

54 ENVIRONMENTAL SCIENCES↗

Qualification of Mixing Criteria by Computational Fluid Dynamics Modeling for the 325 Building Stack Revision

Additional ventilation capacity has been designed for the 325 Building filtered exhaust stack system. The four (4) existing main facility exhaust fans are past the end of their useful life. The fans are being replaced to provide additional exhaust capacity for future growth and to provide a more robust system. Stack operations will involve running various fan combinations at any given time. The air monitoring system of the existing stack previously was found to comply with the American National Standards Institute/Health Physics Society (ANSI/HPS) N13.1-1999 standard. Full-scale, three-dimensional computational fluid dynamics (CFD) modeling was used to evaluate the modified four-fan system for compliance with the ANSI/HPS N13.1-2021 standard, which essentially is equivalent in mixing requirements to the ANSI/HPS N13.1-1999 standard (and ANSI/HPS N13.1-2011). The four mixing criteria evaluated are 1) flow angle, 2) velocity, 3) gas tracer, and 4) particle tracer. In addition to the evaluating the modified four-fan system a temporary single fan stack configuration was also evaluated with CFD modeling. The temporary stack is planned to be used while the four-fan system is being modified. Modeling of the modified four-fan design and temporary ductwork showed that flow angles, velocity uniformity, gas tracer, and particle tracer were acceptable.

42 ENGINEERING↗

A One-Dimensional Stack Model for Redox Flow Battery Analysis and Operation

Current redox flow battery (RFB) stack models are not particularly conducive to accurate yet high-throughput studies of stack operation and design. To facilitate system-level analysis, we have developed a one-dimensional RFB stack model through the combination of a one-dimensional Newman-type cell model and a resistor-network to evaluate contributions from shunt currents within the stack. Inclusion of hydraulic losses and membrane crossover enables constrained optimization of system performance and allows users to make recommendations for operating flow rate, current densities, and cell design given a subset of electrolyte and electrode properties. Over the range of experimental conditions explored, shunt current losses remain small, but mass-transfer losses quickly become prohibitive at high current densities. Attempting to offset mass-transfer losses with high flow rates reduces system efficiency due to the increase in pressure drop through the porous electrode. The development of this stack model application, along with the availability of the source MATLAB code, allows for facile approximation of the upper limits of performance with limited empiricism. This work primarily presents a readily adaptable tool to enable researchers to perform either front-end performance estimates based on fundamental material properties or to benchmark their experimental results.

Barton, John L. (ORCID:0000000225729127)↗

Performance of Polymer Electrolyte Membrane Water Electrolysis Systems: Configuration, Stack Materials, Turndown and Efficiency

A cell model is developed and validated to analyze the performance of polymer electrolyte membrane water electrolysis (PEMWE) stacks and systems. It is used to characterize the oxygen evolution reaction (OER) activity on a TiO2-supported IrO2 catalyst and an unsupported IrO2 powder catalyst. Electrochemical, stack, and system thermoneutral potentials are defined and determined for isothermal and non-isothermal stack operation. Conditions are determined under which the system thermoneutral potential or flammability of H2 in the O2 anode stream limits the stack turndown and operating temperature. Performance is analyzed of a complete PEMWE system with an electrolyzer stack containing an IrO2/TiO2 anode catalyst (2 mg/cm2 Ir loading) and N117-like membrane mitigated for H2 crossover, anode balance-of-plant (BOP) components, cathode BOP system with temperature swing adsorption for H2 purification, and electrical BOP system with transformer and rectifier. At the rated power condition, defined as 2 A/cm2 at 1.9 V, 80 °C, and 30 bar H2 pressure, the stack/system efficiency is 65.3%/60.3% at beginning of life (BOL), decreasing to 59.3%/53.9% at end of life (EOL). The peak stack/system efficiency is 76.3%/70.2% at BOL, decreasing to 71.2%/65.6% at EOL. Improvements in catalyst activity and membrane are identified for a 50% increase in current to 3 A/cm2 at 1.8 V.

36 MATERIALS SCIENCE↗