Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sample Collection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Utah FORGE: EGS Reservoir Produced Fluids Geochemistry 2022-2024

This dataset contains geochemical analyses of produced fluids from the Utah FORGE site, specifically from wells 16A(78)-32, 16B(78)-32, and 58-32, collected during various stimulation, flowback, and circulation tests conducted between 2022 and 2024. The data contains element concentrations, pH, and dissolved gas compositions. Geochemical analyses for 2022 and 2023 were performed at the Brigham Young University geochemistry laboratory, while the 2024 results were obtained from Thermochem. Dry gas samples were collected using a mini-separator attached to the single-phase production line between the wellhead and separator, where fluid was flashed to atmospheric pressure. Gas concentrations were recalculated to a single phase reservoir liquid based on heat and mass balance expressions. Additional contextual information, including interpretations of geochemical trends and reservoir behavior, is available in the included report from Simmons et al. (2025), which was presented at the Stanford Geothermal Workshop in February 2025.

15 GEOTHERMAL ENERGY↗

1H-NMR characterization of soil dissolved organic matter from soil samples in control and warming plots in Blodgett Forest, CA (2014 and 2018)

The pathways of carbon transport and loss through and from soils—soil organic matter (SOM) depolymerization to dissolved organic carbon and mineralization to carbon dioxide (CO2)—are fundamentally driven by microbial activity, which is strongly regulated by environmental conditions. As part of Lawrence Berkeley National Laboratory Terrestrial Ecosystem Science Belowground Biogeochemistry Science Focus Area (SFA), we have established a novel whole-soil long-term warming experiment at the University of California (UC) Blodgett Forest Research Station (Sierra Nevada) in 2014, where we study the role of biogeochemical, microbial and geochemical process interactions in SOM (soil organic matter) decomposition and stabilization. This package contains metabolite data obtained through 1H nuclear magnetic resonance (NMR) spectroscopy on water-extracted soils. Soil samples were collected in 2014/06/03 and 2018/06/04 from 3 replicated paired plots that had been subjected to experimental warming since June 2014 to simulate a predicted climate change scenario for northern California. The following files are included: (1) nmr_h2o_data_raw.csv: raw data, (2) nmr_h2o_data_processed.csv: computed compound concentrations and metadata, (3) nmr_h2o_compound_metadata.csv: compound metadata, (4) nmr_h2o_sample_metadata.csv: sample metadata

1H-NMR (nucleic magnetic resonance) spectroscopy↗

Advancing Aerosol Chemical Characterization and Vertical Profiling over the Southern Great Plains Using Uncrewed Aerial Sampling and Offline Aerosol Mass Spectrometry

Recent advancements in uncrewed aerial systems (UASs) and particulate matter (PM) analytical techniques have provided opportunities for atmospheric research. In this study, we deployed the Department of Energy’s fixed-wing ArcticShark UAS to examine PM 2.5 composition at varying altitudes─within and above the planetary boundary layer (PBL)─over the Southern Great Plains atmospheric observatory (SGP). A total of 22 flights were conducted across March, June, and August 2023. Composite filter samples were collected during each flight and analyzed with offline aerosol mass spectrometry (AMS), complemented by on-board real-time sensors and ground-based instrumentation, to provide a comprehensive view of regional aerosol characteristics. Results show clear vertical and seasonal differences in the aerosol composition. Relative to ground-level measurements, aloft samples exhibited shifts in the distribution of organic and inorganic PM, with the organic composition varying distinctly across seasons. Particulate organic nitrogen (ON) was elevated, with bulk compositions similar in March and June but strongly altered in August, likely driven by biomass burning and enhanced photochemical activity. Combined AMS and chemical ionization mass spectrometry analyses detected amines, amides, and amino acids. PM above the planetary boundary layer was enriched in oxidized organic aerosols, while ground-level PM contained higher nitrate and sulfate. Seasonal differences in aqueous-phase processing were also observed, which were strongest in March during persistent cloud cover and weaker in the drier August period, suggesting a shift from aqueous- to gas-phase SOA formation. In conclusion, these findings highlight the value of UAS in advancing PM measurements and vertical profiling of aerosol composition.

54 ENVIRONMENTAL SCIENCES↗

WHONDRS River Corridor Surface Water Metabolites and Geochemistry from Global Sites

This dataset supports a broader study examining the character of organic matter that may be delivered to subsurface sediments via hydrologic exchange. To implement the global survey, free stream sampling kits were provided to interested volunteers throughout the world. Samples were collected with minimal constraints in terms of location, but following strict protocols, and shipped for metabolomic analysis via Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). In addition, basic geochemistry analyses (e.g., dissolved organic matter concentration) were conducted, standardized photos of each field system were taken, and extensive metadata were captured. Sampling began in 2018 and is ongoing as of 2025. This dataset is comprised of one folders of field photos, one folder of raw Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) data, and one main data folder containing (1) file-level metadata; (2) data dictionary; (3) field metadata; (4) readme; (5) international generic sample number (IGSN) mapping file; (6) field protocol; and (7) a subfolder with sample data. The sample data subfolder contains (1) surface water dissolved organic carbon (DOC, measured as non-purgeable organic carbon, NPOC) data and averages; (2) methods codes; (3) surface water FTICR methods; and (4) a subfolder of 12 Tesla (12T) FTICR-MS data. This folder contains three subfolders, one containing the.xml files, one containing the CoreMS output files, and the other containing instructions and scripts for processing the files in CoreMS (https://github.com/EMSL-Computing/CoreMS). All files are .csv, .pdf, .R, .xml, .html, .Rmd, .py, .cal, .json, .jpg, .jpeg, or .png. For details on how to navigate data packages generated by this project, see https://data.ess-dive.lbl.gov/portals/PNNLRiverCorridorSFA/About.

Biogeochemistry↗

Pennsylvania Department of Environmental Protection (PA DEP) 26r Detailed Produced Water Compositions (version 1.0)

A database of geochemical compositions of aqueous species in produced water reported to the PA DEP. Samples were collected between mid-2012 to early-2020. Data from publicly-available PA DEP 26r reports were scraped from pdf files and cumulated into tabular spreadsheet format for >1000 produced water streams from Marcellus wells in Pennsylvania. In addition to providing the original values, the NETL NEWTS team has reformatted the dataset to allow sample streams to be easily copied into OLI Studio and Geochemist WorkBench (GWB) software for modeling the geochemistry and the recovery of critical minerals, such as lithium, from these produced water streams. In addition, a version of the dataset has been included with predictions for some missing values in the original dataset using machine learning techniques within CoDaRT software, a public ML software developed by the Nation Energy Technology Laboratory. We have made the Input into CoDaRT and one example output from CoDaRT available in this dataset.

Aqueous Chemistry↗

Gamma and Neutron Measurement and Modeling of Irradiated TRISO Fuel

Given the unique characteristics of the PBR fuel cycle, both gamma and neutron measurements are expected to play important roles in performing and maintaining nuclear material control and accounting for spent pebbles to safeguard the fuel cycle. Given the lack of irradiated pebbles in the US, a variety of irradiated TRISO fuel samples with wide ranges of burnups and cooling times available at ORNL were used in this work. A large number of gamma and neutron measurements have been performed on these samples to collect data to test the various detectors and to benchmark the computer models to simulate the depletion and decay of the fuel and the measurements themselves. Two neutron detectors, including a custom-made detector and the Very High-Performance Neutron Multiplicity Counting, were used to measure the neutrons emitted by these TRISO samples. Three gamma spectrometry detectors, including an HPGe and the M400 CZT detector, were used to measure gamma-ray emissions from these samples. The M400 was recently adopted by the IAEA for fresh uranium measurements, but it was tested for spent fuel measurements prior to this project. Detailed MCNP models were developed to simulate these neutron and gamma measurements. Some GADRAS models were also developed to cross check the MCNP models for the gamma measurements. It was found challenging to perform neutron measurements in the hot cell due to the high background counts. Close agreements were observed between the simulated and measured neutron count rates in both detectors’ measurements of californium calibration sources. Both the HPGe and M400 detectors were able to measure the 604 and 662 keV peaks from these samples, which are the two most important peaks used to infer fuel burnup. Although the M400 detector did not have nearly good energy resolution and did not detect some of the minor peaks as the HPGe detector, it was found to be capable of handling significantly higher dose rates than HPGe. Given the complexities in the TRISO samples (e.g., different samples sizes) and uncertainties in the alignments between the detector and the TRISO fuel inside the containers, large scatters were found between the peak area rates and the samples’ burnups. However, the 604/662 peak ratios were found to trend well with the samples’ burnups among most samples in both measured and simulated results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Pennsylvania Department of Environmental Protection (PA DEP) 26r Detailed Produced Water Compositions (version 2.0)

A database of geochemical compositions of aqueous species in produced water reported to the PA Department of Environmental Protection (PA DEP). Samples were collected between late-2010 to late-2024. Data from publicly available PA DEP 26r reports were scraped from pdf files and cumulated into tabular spreadsheet format for >3,000 produced water streams from Marcellus Shale wells in Pennsylvania. In addition to providing the original values, the NETL NEWTS team has reformatted the dataset to allow sample streams to be easily copied into OLI Studio and Geochemist WorkBench (GWB) software for modeling the geochemistry and the recovery of critical minerals, such as lithium, from these produced water streams. ***This dataset is an updated version of the PA DEP 26r Detailed Produced Water Compositions (version 1.0) dataset, providing expanded spatial and temporal coverage.***

Aqueous Chemistry↗

Old Woman Creek Wetland Sediment and Electrochemical Sensor Microbial Community, 2023

We are developing a technique to monitor microbiological activities referred to as zero resistance ammetry, which entails the deployment of graphite electrodes in sediments. Measurement of current between electrodes of contrasting redox regimes and/or predominant terminal electron accepting processes can be used as an indicator of the extents of microbiological activity. We deployed an electrode array at depths of 2 mm, 4 mm, 76 mm, 78 mm, 152 mm, 154 mm, 227 mm, and 229 mm below the wetland sediment water interface in the Old Woman Creek National Estuarine Research Center, Huron, OH, USA (Lat. = 41.380833, Long. = -82.508889). A core was collected from adjacent sediment and subsamples were collected from depth intervals of 0 – 25 mm, 25 – 127 mm, 127 – 128 mm, and below 178 mm. To determine if the microbial communities attached to the electrodes were reflective of the adjacent sediment-associated microbial community, we conducted a 16S rRNA gene-based (V4 region) survey of these respective materials. This data package contains the results of these surveys, including metadata on the depths from which samples were collected (samples.csv), DNA extraction and sequencing information (OWC_DEPTH_AMPLICON_SEQUENCING_METADATA), sequence processing information (OWC_DEPTH_BIOINFORMATIC_METADATA.csv), an operational taxonomic unit (OTU) table (OWC_DEPTH_97OTUS_TABLE.csv), and nucleotide sequences of OTUs (OWC_DEPTH_97OTUS_SEQS.fasta). All files can be opened using a text-editing application. The fasta file is compatible with bioinformatics applications.

54 ENVIRONMENTAL SCIENCES↗

Levoglucosan data from five coastal streams impacted by the 2020 CZU Lightning Complex Fires, California, United States

This dataset includes levoglucosan data for five coastal California (United States) streams impacted by the 2020 CZU Lightning Complex Fires which burned from August 16th through September 22nd. Levoglucosan is a highly soluble and biolabile fraction of pyrogenic carbon. The five watersheds (San Lorenzo River, Pescadero Creek, Majors Creek, Laguna Creek, and Scott Creek) were impacted by the fires with watersheds experiencing a range of burn severity and extents. Grab samples were collected from each stream between October 2020 and May 2021, targeting both baseflow and event flow hydrologic conditions. Additional biogeochemistry data (i.e., organic and black carbon concentrations) can be found in a separate data package (https://doi.org/10.4211/hs.421c0226bb38460c8393d67fe0c4f802). This data package consists of one main data folder that contains (1) readme; (2) file-level metadata; (3) data dictionary; (4) field metadata with international generic sample numbers (IGSN); (5) methods codes; and (6) levoglucosan data. All files are .csv or .pdf.

2020 CZU Lightning Complex Fires↗

Risk Assessment in a Chemical Laboratory Following an Explosive Incident Involving a Novel Diazonium Compound: Retrospective Analysis and Lessons Learned

Diazonium compounds are synthetically useful in the production of dyes and textiles, however they are highly explosive under dry conditions. Explosion prevention becomes more difficult when new diazonium compounds are synthesized, because while some syntheses include a counterion to increase their stability, this is not always a reliable method to prevent an explosive incident. Due to the uncertainty surrounding the explosiveness of different diazonium compounds, it is important to understand how to safely clean up after an incident and how to determine when it is safe to return a laboratory to typical operational use, particularly when the incident involves a novel compound where a standard does not exist for instrument calibration. Here, an explosive event is discussed involving the synthesis of 4-bromo-benzenediazonium-2-carboxylate. Following the explosive incident and 3-step cleanup, which involved a precautionary neutralization step, samples were collected from the fume hood where the incident occurred. Because the incident involved an unstable, novel compound that is not commercially available and was deemed unsafe to resynthesize for instrument calibration, we assessed the risk of further explosion by analyzing for the stable decomposition products. Mass spectrometry analysis confirmed that the residue in the fume hood contained 5-bromosalicylic acid, a decomposition product of 4-bromo-benzenediazonium-2-carboxylate. Samples were taken from multiple points in the fume hood and analyzed to estimate the spatial distribution of the decomposition product. Based on this analysis, we inferred that the primary decomposition product was far more abundant than residual energetic, indicating the energetic had been consumed or neutralized to a trace quantity where the risk of further explosion was low. Furthermore, the steps presented here─specifically, initial neutralization and then analyzing the spatial distribution of expected decomposition products to assess risk when a novel explosive material is detonated in a confined space─were our approach to assess further risk following an explosion due to a novel diazonium compound without the need for any further handling or resynthesis of the energetic. Here, we present our approach and critically analyze these steps by discussing retrospective lessons learned and alternative analytical approaches.

Computer simulations↗

Calcium is associated with specific soil organic carbon decomposition products at Blodgett Forest Research Center, Georgetown, California as analysed with scanning transmission X-ray microscopy carbon near-edge X-ray absorption fine structure spectroscopy

This data is from the paper calcium is associated with specific soil organic carbon decomposition products, published in SOIL. DOI: https://doi.org/10.5194/soil-11-381-2025, 2025.This file contains CSVs with spectral data and bulk soil data and there is no specific program required to open this data. The data includes Scanning transmission X-ray microscopy carbon near-edge X-ray absorption fine structure spectroscopy. data from the measurement of samples from the Whole-soil Warming project, run by the Belowground Biogeochemistry team at Blodgett Forest Research Center, Georgetown, California run by the University of California, Berkeley. It also includes bulk soil chemical properties. The University of California's Blodgett Forest Research Station (Forest) is situated in the Sierra Nevada foothills (1370 m a.s.l.) near Georgetown, California. The samples were collected from here: 38.912013, -120.661469, https://maps.app.goo.gl/291bCJ1zVqUhgktz6. The Forest soils were characterised as Alfisols, which are equivalent to Dystric Cambisols (IUSS Working Group WRB, 2015), and formed in granitic parent materials, in a temperate climate, under thinned, mixed-coniferous forest (Fig. S3; Gaudinski et al., 2009). With these analyses we aimed to answer the question, is calcium associated with a specific type of organic matter enriched in aromatic and phenolic carbon at the microscale in samples from Blodgett Forest Research Center? and how does this specific type of carbon respond to experiments targetted at removing and adding calcium to the soils, specifically cation exchange and incubation after calcium addition? Abstract from the paper can be found below: Calcium (Ca) may contribute to the preservation of soil organic carbon (SOC) in more ecosystems than previously thought. Here we provide evidence that Ca is co-located with SOC compounds that are enriched in aromatic and phenolic groups, across different acidic soil-types and locations with different ecosystem properties, differing in terms of climate, parent material, soil type, and vegetation. In turn, this co-localised fraction of Ca-SOC is removed through cation-exchange, and the association is then only re-established during decomposition in the presence of Ca (Ca addition incubation). Thus, highlighting a causative link between decomposition and the co-location of Ca with a characteristic fraction of SOC. Decomposition increases the relative proportion of negatively charged functional groups, which can increase the propensity for the association between SOC and Ca, and in turn, this association inhibits dissolved organic carbon export or further decomposition. We propose that this mechanism could be driven by Ca hotspots on the microscale shifting local decomposition processes and thereby explaining the colocation of Ca with SOC of a specific composition across different acidic soil environments. Incorporating this biogeochemical process into Earth System Models could improve our understanding, predictions, and management of carbon dynamics in soils, and account for their response to Ca-rich amendments.

54 ENVIRONMENTAL SCIENCES↗

WHONDRS Surface Water Geochemistry and Organic Matter Characterization Data from Streams Distributed across Latin America

This dataset supports a broader study examining global transferability of stream biogeochemistry and was generated in collaboration with the MicroSudAqua (µSudAqua) network (https://microsudaqua.netlify.app/en/). The dataset provides surface water geochemistry (dissolved organic carbon, total dissolved nitrogen, cations) and organic matter characterization (FTICR-MS) from streams in Argentina, Brazil, Chile, and Colombia. Samples were collected across stream orders (1st to 6th order) within five basins. Related data were collected and will be published separately in collaboration with the µSudAqua network. For details on how to navigate data packages generated by this project, see https://data.ess-dive.lbl.gov/portals/PNNLRiverCorridorSFA/About. In addition to this readme, this data package also includes a file-level metadata (FLMD) file that describes each file and a data dictionary (DD) that describes all column/row headers and variable definitions. This dataset is comprised of (1) a folder of field photos; (2) a folder of surface water sample data, (3) a folder of raw Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) data; (4) file-level metadata; (5) data dictionary; (6) field metadata; (7) readme; (8) international generic sample number (IGSN) mapping file; and (9) field protocol. The sample data subfolder contains (1) dissolved organic carbon (DOC, measured as non-purgeable organic carbon, NPOC) data and averages; (2) total dissolved nitrogen data and averages; (3) anions and averages; (4) methods codes; (5) FTICR-MS methods; and (15) a subfolder of 9.4 Tesla (9.4T) FTICR-MS data. This folder contains the processed data and three subfolders, one containing the .xml files, one containing the water CoreMS output files, and the other containing instructions and scripts for processing the files in CoreMS (https://github.com/EMSL-Computing/CoreMS). All files are .csv, .pdf, .R, .xml, .d, .html, .Rmd, .py, .cal, .json, .jpg, .jpeg, .png, .mov, or .mp4.

Anions↗

Comparison of gene expression in the skin tissue of gray, humpback, and fin whales

Analyses of gene expression in the skin of several species of whales identified genes that are differentially expressed in association with environmental factors, suggesting that skin transcriptomics may provide a valuable tool for assessing physiological responses in marine mammals. Previous work exploring differing levels of gene expression has focused on odontocetes with comparatively limited investigation of skin gene expression has been explored in mysticetes. Here, we describe the identity of genes expressed in skin tissue of three species of baleen whales to establish a baseline of gene expression and compare gene identity and expression patterns across species. We also evaluate sex-specific differences in skin gene expression through a comparison of expression levels between males and females in gray and humpback whales. A total of 16 skin tissue samples were collected from free-ranging gray, humpback and fin whales off the central Oregon coast in the eastern North Pacific. Comparison of the expressed genes in the humpback and gray whale skin tissue to the blue whale reference database identified enriched gene ontology terms in the skin tissue of each species, suggesting genes over-represented in the whale skin related to cell epithelial development, regulation of gene expression and cell maintenance . Comparison of gene expression between male and female samples revealed sex-specific differences in gray and humpback whales. A differential gene expression analysis identified several x-linked genes that have been previously identified and show gene expression differences in male and female cetaceans, such as ZFX, DDX3X and USP9X. Establishing baseline skin gene expression profiles for these three baleen whale species sampled off the Oregon coast provides a foundation for linking transcriptome variation with physiological condition and environment.

Sremba, Angela↗

SPRUCE Wood Anatomy of Picea mariana and Larix laricina in SPRUCE Experimental Plots, Marcell Experimental Forest, Minnesota, July 2023

Branch samples were collected in July 2023 to measure wood anatomical traits on two dominant conifer species, Picea mariana and Larix laricina, in a bog forest at the SPRUCE (Spruce and Peatland Responses Under Changing Environments) experiment in northern Minnesota. Anatomical measurements were made on the annual rings of those branches with dates ranging from 2011-2023. Wood anatomical measurements include annual tracheid diameter, tracheid density, cell wall thickness, thickness-to-span-ratio, and conduit lumen fraction in both earlywood and latewood. Wood anatomical samples were prepared using a portable sliding microtome (G.S.L.-1 lightweight microtome, WSL) and a light microscope (Leica DM2500). This dataset spans 2011–2023, with full branch-level coverage for 2020–2023, whereas some thinner branches formed only in recent years and therefore do not contain rings from earlier years. By providing annual, treatment-specific anatomical measurements, this dataset can help quantify structural acclimation to global change, clarify links among phenology, wood formation, and hydraulic traits, and improve predictions of forest growth response under future climates. This dataset contains one data file in comma separate (.csv) format. Additional metadata are provided: one data dictionary and a file-level metadata file in comma separate (.csv) format and a user guide in PDF (*.pdf) format.

annual tracheid diameter↗

Where do the fish go in winter? A year of observing seasonal changes in Sequim Bay’s nearshore fish community

The use of environmental DNA (eDNA) sampling has been proposed as a complementary method to monitor fish species in marine environments. eDNA offers a non-invasive, cost-effective, and scalable way to detect aquatic species. It is appealing in environments where traditional methods are limited by access or visibility, especially in complex or sensitive habitats such as tidal channels and other marine energy sites. Before eDNA can be fully relied upon, we must verify its accuracy against established methods, like underwater photography. In this study, we collected eDNA samples and concurrently deployed a 360-degree camera near the floating dock of PNNL-Sequim in the tidal channel of Sequim Bay once a month for twelve consecutive months. During deployments, the camera remained on the seafloor for several hours overlapping slack tide and captured time-lapse photographs at ten second intervals. Counts and identifications of fish species observed in the images were used to calculate monthly Shannon diversity and Pielou evenness indices. These values were compared across the months using a Kruskal-Wallis test paired with a Conover-Iman post-hoc test. Cliff’s Delta was also calculated to quantify the effect size of the monthly differences. No fish were observed from December through April, likely due to seasonal behavior changes within the local fish community. Fish returned to the shoreline in May, with the greatest diversity and evenness recorded in September. These findings reveal substantial seasonal variation in nearshore fish communities. Many monthly comparisons were found to contain statistically significant differences within the diversity and evenness, and even more were found to have large effect sizes, signifying large ecological changes throughout the seasons. The absence of fish observed during the winter months is a key outcome of this survey that will hopefully be reflected in the eDNA results still to come, which would help validate the eDNA approach.

59 BASIC BIOLOGICAL SCIENCES↗

Genetic modification of the shikimate pathway to reduce lignin content in switchgrass ( Panicum virgatum L.) significantly impacts plant microbiomes

Switchgrass (Panicum virgatum L.) is considered a sustainable biofuel feedstock, given its fast-impact growth, low input requirements, and high biomass yields. Improvements in bioenergy conversion efficiency of switchgrass could be made by reducing its lignin content. Engineered switchgrass that expresses a bacterial 3-dehydroshikimate dehydratase (QsuB) has reduced lignin content and improved biomass saccharification due to the rerouting of the shikimate pathway towards the simple aromatic protocatechuate at the expense of lignin biosynthesis. However, the impacts of this QsuB trait on switchgrass microbiome structure and function remain unclear. To address this, wild-type and QsuB-engineered switchgrass were grown in switchgrass field soils, and samples were collected from inflorescences, leaves, roots, rhizospheres, and bulk soils for microbiome analysis. We investigated how QsuB expression influenced switchgrass-associated fungal and bacterial communities using high-throughput Illumina MiSeq amplicon sequencing of ITS and 16S rDNA. Compared to wild-type, QsuB-engineered switchgrass hosted different microbial communities in roots, rhizosphere, and leaves. Specifically, QsuB-engineered plants had a lower relative abundance of arbuscular mycorrhizal fungi (AMF). Additionally, QsuB-engineered plants had fewer Actinobacteriota in root and rhizosphere samples. These findings may indicate that changes in the plant metabolism impact both AMF and Actinobacteriota similarly or potential interactions between AMF and the bacterial community. This study enhances understanding of plant-microbiome interactions by providing baseline microbial data for developing beneficial bioengineering strategies and by assessing nontarget impacts of engineered plant traits on the plant microbiome.

09 BIOMASS FUELS↗

Metagenome-assembled genomes from soil samples in control and warming plots in Blodgett Forest, CA (2014-2021)

The pathways of carbon transport and loss through and from soils—soil organic matter (SOM) depolymerization to dissolved organic carbon and mineralization to carbon dioxide (CO2)—are fundamentally driven by microbial activity, which is strongly regulated by environmental conditions. As part of LBNL (Lawrence Berkeley National Laboratory) TES (Terrestrial Ecosystem Science) Belowground Biogeochemistry Science Focus Area (SFA), we have established a novel whole-soil long-term warming experiment at the University of California (UC) Blodgett Forest Research Station (Sierra Nevada) in 2014, where we study the role of biogeochemical, microbial and geochemical process interactions in SOM decomposition and stabilization.Here, we present metagenome-assembled genomes (MAGs) for the bacterial and archaeal community from soil depth profiles collected from 2014 to 2021 from three paired control and warming plots. We collected soil samples across a range of depth profiles (spanning surface to 90 cm deep) from three paired control and warming plots from a temperate mixed forest in Northern California. Each paired plot had been subjected to experimental warming since June 2014 to simulate a predicted climate change scenario for northern California. 101 soil metagenomes were sequenced at JGI (Joint Genome Institute) and UCSF (University of California San Francisco) Center for Advanced Technology and can be found under the JGI (Joint Genome Institute) GOLD (Genomes Online Database) Sequencing project Gs0151586 and NCBI (National Center for Biotechnology Information) Projects PRJNA1225762 and PRJEB39497. Metagenomes were assembled using JGI (Joint Genome Institute) Metagenome Workflow (10.1128/mSystems.00804-20). For each metagenome, the assembled contigs were binned into genomes using 3 binning algorithms (cocacola, metabat, and maxbin) and the resulting bins were consolidated using dastool. The consolidated bins from all metagenomes were pooled, filtered by completeness (>50%) and contamination (<25%), and dereplicated at 99% ANI (average nucleotide identity) using dRep (https://github.com/MrOlm/drep).The dataset includes a zip file of 2321 MAG (Metagenome Assembled Genome) fasta files, the accession numbers for the underlying metagenomes, and a csv file with MAG (Metagenome Assembled Genome) quality metrics and taxonomic classification (GTDB -Genome Taxonomy Database-RS220). This dataset also includes a file-level metadata (flmd.csv) file that lists each file contained in the dataset with associated metadata and a data dictionary (dd.csv) file that contains column/row headers used throughout the files along with a definition, units, and data type. A sample metadata file (samples.csv) that contains site information has also been included.

54 ENVIRONMENTAL SCIENCES↗

Bayesian Framework for Bioburden Density Estimation in Planetary Protection

To comply with the international planetary protection policy set forth by the Committee on Space Research and NASA Agency level requirements, spacecraft destined to biologically sensitive planetary bodies have to minimize terrestrial biological contamination. Analysis, testing and inspection are the standard forward verification activities that are used to demonstrate compliance with the biological contamination requirements. For testing of spacecraft surface areas, a swab or wipe sample is collected from surfaces prior to last access and subsequently processed in the lab using NASA Approved Planetary Protection Methods for Culture Based Assays. Raw data resulting from this assay is then statistically treated employing a mathematical paradigm stemming from the 1970’s Viking Lander Project to generate the bioburden density and total microbial bioburden present. This standard approach arbitrarily accounts for error and provides an upper conservative bound as it reports the maximum number of spores estimated to be present on flight hardware surfaces. A bioburden density estimate factors in the following variables: the observed bioburden count, representative volume processed, sampling efficiencies. Notably, to account for error in the approach, a 0 observed count is arbitrarily changed to a count of 1 for each hardware grouping. The data generated by spacecraft bioburden verification campaigns in the past have resulted in <80% of wipes and <90% of swabs containing a bioburden count of 0. As such, having a robust and well documented statistical approach for dealing with the probability of low incident rates is necessary to be able to estimate spacecraft bioburden. Being able to statistically describe the bioburden distribution and associated confidence level is a gamechanger for the development of bioburden allocations during mission design and will allow for tighter management of risk throughout spacecraft build. Thus, Empirical Bayes statistical approach was evaluated to estimate the microbial bioburden on spacecraft to mitigate the aforementioned mathematical concerns and provide a probabilistic bioburden distribution of the flight hardware surface. For application of this approach to performing bioburden calculations, a range of non-informative prior assumptions on hardware surfaces are explored for Bayesian analyses while informative priors using posterior distributions from prior assays are utilized for Empirical Bayes analyses. Several non-informative priors are currently under investigation to assess fitness including use of these priors to serve as a foundation to build off of NASA specification values or a basis of risk to account for unknowns during the integration and testing process. Informative priors under consideration are generated using sampled bioburden values from hardware originating within like processing environments (e.g. vendor cleaning process or similar assembly process), temporal spacecraft status events as a prediction for hardware cleanliness of future samples, and heritage system bioburden actuals to predict allocation for subsequent missions. Informative priors and probabilistic bioburden distributions are then validated using data sets from the Mars Exploration Rover, Mars Science Laboratory, and InSight missions. Using Empirical Bayes approach to generate a probabilistic bioburden distribution as demonstrated through mission use cases provides a valid approach for use in the end-to-end requirements verification process.

97 - MATHEMATICS AND COMPUTING↗