Search NASA⌕ Search

SEARCH · Search NASA

Results for “Shell Solar”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Evaluation of Alternative Designs for a High Temperature Particle-to-SCO2 Heat Exchanger

This paper presents an evaluation of alternative particle heat-exchanger designs, including moving packed-bed and fluidized-bed designs, for high-temperature heating of a solar-driven supercritical CO2 (sCO2) Brayton power cycle. The design requirements for high pressure (= 20 MPa) and high temperature (= 700 degrees C) operation associated with sCO2 posed several challenges requiring high-strength materials for piping and/or diffusion bonding for plates. Designs from several vendors for a 100 kW-thermal particle-to-sCO2 heat exchanger were evaluated as part of this project. Cost, heat-transfer coefficient, structural reliability, manufacturability, parasitics and heat losses, scalability, compatibility, erosion and corrosion, transient operation, and inspection ease were considered in the evaluation. An analytical hierarchy process was used to weight and compare the criteria for the different design options. The fluidized-bed design fared the best on heat transfer coefficient, structural reliability, scalability and inspection ease, while the moving packed-bed designs fared the best on cost, parasitics and heat losses, manufacturability, compatibility, erosion and corrosion, and transient operation. A 100 kWt shell-and-plate design was ultimately selected for construction and integration with Sandia's falling particle receiver system.

14 SOLAR ENERGY↗
DOE OSTI2022

Hydride-based thermal energy storage

Abstract The potential and research surrounding metal hydride (MH) based thermal energy storage is discussed, focusing on next generation thermo-chemical energy storage (TCES) for concentrated solar power. The site availability model to represent the reaction mechanisms of both the forward and backward MH reaction is presented, where this model is extrapolated to a small pilot scale reactor, detailing how a TCES could function/operate in a real-world setting using a conventional shell & tube reactor approach. Further, the important parameter of effective thermal conductivity is explored using an innovative multi-scale model, to providing extensive and relevant experimental data useful for reactor and system design. Promising high temperature MH material configurations may be tuned by either destabilisation, such as using additions to Ca and Sr based hydrides, or by stabilisation, such as fluorine addition to NaH, MgH 2 , or NaMgH 3 . This versatile thermodynamic tuning is discussed, including the challenges in accurately measuring the material characteristics at elevated temperatures (500 –700 °C). Attention to scale up is explored, including generic design and prototype considerations, and an example of a novel pilot-scale pillow-plate reactor currently in development; where materials used are discussed, overall tank design scope and system integration.

25 ENERGY STORAGE↗
DOE OSTI2016

Multi-wavelength study of the supernova remnant Kes 79 (G33.6+0.1): on its supernova properties and expansion into a molecular environment

Kes 79 (G33.6+0.1) is an aspherical thermal composite supernova remnant (SNR) observed across the electromagnetic spectrum and showing an unusual highly structured morphology, in addition to harboring a central compact object (CCO). Using the CO J = 1–0, J = 2–1, and J = 3–2 data, we provide the first direct evidence and new morphological evidence to support the physical interaction between the SNR and the molecular cloud in the local standard of rest velocity ∼105 km s{sup −1}. We revisit the 380 ks XMM-Newton observations and perform a dedicated spatially resolved X-ray spectroscopic study with careful background subtraction. The overall X-ray-emitting gas is characterized by an under-ionized (τ{sub c}∼6×10{sup 11} cm{sup −3}) cool (kT{sub c}≈0.20 keV) plasma with solar abundances, plus an under-ionized (τ{sub h}∼8×10{sup 10} cm{sup −3}) hot (kT{sub h}≈0.80 keV) plasma with elevated Ne, Mg, Si, S, and Ar abundances. The X-ray filaments, spatially correlated with the 24 μm IR filaments, are suggested to be due to the SNR shock interaction with dense gas, while the halo forms from SNR breaking out into a tenuous medium. Kes 79 appears to have a double-hemisphere morphology viewed along the symmetric axis. Projection effect can explain the multiple-shell structures and the thermal composite morphology. The high-velocity, hot (kT{sub h}∼1.4--1.6 keV) ejecta patch with high metal abundances, together with the non-uniform metal distribution across the SNR, indicate an asymmetric SN explosion of Kes 79. We refine the Sedov age to 4.4–6.7 kyr and the mean shock velocity to 730 km s{sup −1}. Our multi-wavelength study suggests a progenitor mass of ∼15–20 solar masses for the core-collapse explosion that formed Kes 79 and its CCO, PSR J1852+0040.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2017

Solar abundance ratios of the iron-peak elements in the Perseus cluster

The metal abundance of the hot plasma that permeates galaxy clusters represents the accumulation of heavy elements produced by billions of supernovae1. Therefore, X-ray spectroscopy of the intracluster medium provides an opportunity to investigate the nature of supernova explosions integrated over cosmic time. In particular, the abundance of the iron-peak elements (chromium, manganese, iron and nickel) is key to understanding how the progenitors of typical type Ia supernovae evolve and explode2–6. Recent X-ray studies of the intracluster medium found that the abundance ratios of these elements differ substantially from those seen in the Sun, suggesting differences between the nature of type Ia supernovae in the clusters and in the Milky Way. However, because the K-shell transition lines of chromium and manganese are weak and those of iron and nickel are very close in photon energy, highresolution spectroscopy is required for an accurate determination of the abundances of these elements. Here in this paper we report observations of the Perseus cluster, with statistically significant detections of the resonance emission from chromium, manganese and nickel. Our measurements, combined with the latest atomic models, reveal that these elements have near-solar abundance ratios with respect to iron, in contrast to previous claims. Comparison between our results and modern nucleosynthesis calculations disfavours the hypothesis that type Ia supernova progenitors are exclusively white dwarfs with masses well below the Chandrasekhar limit (about 1.4 times the mass of the Sun). The observed abundance pattern of the iron-peak elements can be explained by taking into account a combination of near- and sub-Chandrasekhar-mass type Ia supernova systems, adding to the mounting evidence that both progenitor types make a substantial contribution to cosmic chemical enrichment.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Materials Design Directions for Solar Thermochemical Water Splitting

The sustainable, economical production of molecular hydrogen is a crucial component of a net zero-greenhouse-gas-emissions future. Solar thermochemical water splitting (STWS) offers a renewable route to hydrogen with the potential to help decarbonize several industries, including transportation, manufacturing, mining, metals processing, and electricity generation, as well as provide sustainable hydrogen as a chemical feedstock. STWS uses high temperatures generated from concentrated sunlight or other sustainable means for high-temperature heat to produce hydrogen and oxygen from steam. For example, in its simplest form of a two-step thermochemical cycle, a redox-active metal oxide is heated to ≈1700-2000 K, driving off molecular oxygen while producing oxygen vacancies in the material. The reduced metal oxide then cools (ideally with the extracted heat recuperated for re-use) and, in a separate step, comes into contact with steam, which reacts with oxygen vacancies to produce molecular hydrogen while recovering the original state of the metal oxide. Despite its promising use of the entire solar spectrum to split water thermochemically, the current estimated cost of hydrogen produced via STWS is ≈4-6× the U.S. Department of Energy (DOE) Hydrogen Shot target value of $1/kg. One contributing approach to bridging this cost gap is the design of new materials with improved thermodynamic properties to enable higher efficiencies. The state-of-the-art (SOA) redox-active metal oxide for STWS is ceria (CeO 2 ), due to its close to optimal, although too high, oxygen vacancy formation enthalpy and large configurational and electronic entropy of reduction. However, ceria requires high operating temperatures and its efficiency is insufficient. Therefore, efforts to increase the efficiency of STWS cycles have focused on further optimizing oxygen vacancy formation enthalpies and augmenting the reduction entropy via substitution or doping and materials discovery schemes. Examples of the latter include the perovskites BaCe 0.25 Mn 0.75 O 3 and (Ca,Ce)(Ti,Mn)O 3 . These efforts and others have revealed intuitive chemical principles for the efficient and systematic design of more effective materials, such as the strong correlation between the enthalpies of crystal bond dissociation and solid-state cation reduction with the enthalpy of oxygen vacancy formation, as well as configurational entropy augmentation via the coexistence of two or more redox-active cation sublattices. The purpose of this chapter is to prepare the reader with an up-to-date account of STWS redox-active materials, both the SOA and promising newcomers, as well as to provide chemically intuitive strategies for improving their cycle efficiencies through materials design – in conjunction with ongoing efforts in reactor engineering and gas separations – to reach the cost points for commercial viability. First, we will introduce the thermodynamics of STWS using a two-step, metal-oxide, thermochemical cycle with economics in mind. We also will compare the pros and cons of processes that do or do not involve phase changes. Second, we will describe the qualities that make ceria the SOA STWS redox-active material, as well as its limitations. Third, we will survey some of the most promising candidates to date in the search for materials to supplant ceria, emphasizing the post-ternary, metal-oxide-perovskite alloys. Lastly, we will enumerate and discuss the following materials design directions for STWS redox-active materials: crystal reduction potentials as a proxy for oxygen vacancy formation enthalpies, engineering the electronic and configurational entropy of reduction via f-shells and simultaneous redox, and vetting materials stability via temperature-dependent phase diagrams and melting-point prediction.

08 HYDROGEN↗
DOE OSTI2020

Exploring the mass surface near the rare-earth abundance peak via precision mass measurements at JYFLTRAP

The JYFLTRAP double Penning trap at the Ion Guide Isotope Separator On-Line facility has been used to measure the atomic masses of 13 neutron-rich rare-earth isotopes. Eight of the nuclides, 161 Pm, 163 Sm, 164,165 Eu, 167 Gd, and 165,167,168 Tb, were measured for the first time. The systematics of the mass surface has been studied via one- and two-neutron separation energies as well as neutron pairing-gap and shell-gap energies. The proton-neutron pairing strength has also been investigated. Furthermore, the impact of the new mass values on the astrophysical rapid neutron capture process has been studied. The calculated abundance distribution results in a better agreement with the solar abundance pattern near the top of the rare-earth abundance peak at around A≈165.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2012

Nanostructured Materials for Improved Photovoltaics

This research addresses the fundamental issues of cell morphology and phase dimensions that determine conversion efficiency in polymeric organic photovoltaic devices. The approach will help explain the relationships between morphological control, domain size, and power conversion efficiency in OPV devices, with the goal of providing direction for development of OPV systems with greater efficiency. The program addresses the DOE Office of Energy Efficiency and Renewable Energy goals of providing economically sustainable clean energy technologies to reduce dependence on foreign oil. This research focused on synthesis, fabrication and analysis of both active and protective layers for improved organic and inorganic hybrid PV (PhotoVoltaic) materials. A systematic study of phase size, shape, and distance was conducted to determine the effects of morphology in each process. Four classes of nanostructured materials were studied: 1) functional block copolymers (AB, acceptor-donor blocks) that self-assemble into matched domain sizes 2) synthetic core-shell particles with separate acceptor and donor layers 3) bacterial micro-compartment (BMC) proteins as self-assembling shells for core-shell nanoparticle constructs and 4) polyhedral oligomeric silsesquioxane (POSS) nanostructured chemicals for enhanced efficiency and durability.

14 SOLAR ENERGY↗
DOE OSTI2016

Enhancing Quantum Yield via Local Symmetry Distortion in Lanthanide-Based Upconverting Nanoparticles

Lanthanide-based upconverting nanoparticles exhibit significant promise for solar energy generation, biological imaging, and security technologies but have not seen widespread adoption due to the prohibitively low efficiencies of current materials. Weak transition dipole moments between 4f orbitals hinder both photon absorption and emission. Here, we introduce a novel way to increase the radiative transition rates in Yb,Er-based upconverting nanoparticles based on local symmetry distortion. Beginning from a host matrix of the well-studied hexagonal (β)-phase NaYF 4 , we incrementally remove Y 3+ ions and cosubstitute for them a 1:1 mixture of Gd 3+ and Lu 3+ . These two ions act to expand and contract the lattice, respectively, inducing local-level distortion while maintaining the average host structure. We synthesize a range of β-NaY 0.8-2 x Gd x Lu x F 4 :Yb 0.18 Er 0.02 nanoparticles and experimentally confirm that particle size, phase, global structure, and Yb 3+ and Er 3+ concentrations remain constant as x is varied. Upconversion quantum yield is probed as the degree of cosubstitution is varied from x = 0 to x = 0.24. We achieve a maximum quantum yield value of 0.074% under 63 W/cm 2 of excitation power density, representing a 1.6× enhancement over the unmodified particles and the highest measured value for near-infrared-to-visible upconversion in sub-25 nm unshelled nanoparticles. We also investigate upconversion emission at the single-particle level and report record improvements in emission intensity for sub-50 nm particles. Radiative rate enhancements are confirmed by measuring excited-state lifetimes. The approach described herein can be used in combination with more established methods of efficiency improvement, such as adding passivating shells or coupling to plasmonic nanoattenas, to further boost the upconversion quantum yield.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Solar Spectrum Conversion for an Algae Bioreactor (CRADA Final Report)

This project focused on developing advanced optical coatings to improve solar energy utilization. The research aimed to create lanthanide-doped upconversion nanoparticles (UCNPs) capable of capturing unused near-infrared (NIR) light from the sun and converting it into visible light (blue and red photons) that can be used for photosynthesis. The primary goal was to identify, synthesize, and integrate highly efficient UCNPs into a transparent thin-film device. Through a comprehensive workflow involving computer simulations, high-throughput robotic synthesis, and detailed optical characterization, the project successfully developed a high-performance material. The key technical achievement was the creation of a core-shell UCNP (NaYF₄:20%Yb³⁺, 2%Er³⁺ coated with a 10 nm NaYF₄ shell) that demonstrated a quantum yield of 3.2% for converting 980 nm NIR light into visible light. Transparent thin films fabricated from these nanoparticles showed excellent optical properties, confirming their potential for practical applications. This research adds to the scientific understanding of energy transfer in lanthanide materials and demonstrates a technically effective method for creating efficient light-converting coatings. The primary benefit to the public lies in the potential for these coatings to enhance the efficiency of solar-driven processes, such as boosting the growth of algae in photobioreactors for biofuel production.

14 SOLAR ENERGY↗
DOE OSTI2015

Visible photoelectrochemical water splitting into H 2 and O 2 in a dye-sensitized photoelectrosynthesis cell

A hybrid strategy for solar water splitting is exploited here based on a dye-sensitized photoelectrosynthesis cell (DSPEC) with a mesoporous SnO 2 /TiO 2 core/shell nanostructured electrode derivatized with a surface-bound Ru(II) polypyridyl-based chromophore–catalyst assembly. The assembly, [(4,4’-(PO 3 H 2 ) 2 bpy) 2 Ru(4-Mebpy-4’-bimpy)Ru(tpy)(OH 2 )] 4+ ([RuaII-RubII-OH 2 ] 4+ , combines both a light absorber and a water oxidation catalyst in a single molecule. It was attached to the TiO 2 shell by phosphonate-surface oxide binding. The oxide-bound assembly was further stabilized on the surface by atomic layer deposition (ALD) of either Al 2 O 3 or TiO 2 overlayers. Illumination of the resulting fluorine-doped tin oxide (FTO)|SnO 2 /TiO 2 |-[Ru a II -Ru b II -OH 2 ] 4+ (Al 2 O 3 or TiO 2 ) photoanodes in photoelectrochemical cells with a Pt cathode and a small applied bias resulted in visible-light water splitting as shown by direct measurements of both evolved H 2 and O 2 . The performance of the resulting DSPECs varies with shell thickness and the nature and extent of the oxide overlayer. Use of the SnO 2 /TiO 2 core/shell compared with nanoITO/TiO 2 with the same assembly results in photocurrent enhancements of ~5. In conclusion, systematic variations in shell thickness and ALD overlayer lead to photocurrent densities as high as 1.97 mA/cm 2 with 445-nm, ~90-mW/cm 2 illumination in a phosphate buffer at pH 7.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Hf-W chronology of ordinary chondrites

Fifteen H, L, and LL ordinary chondrites of petrologic types 4–6 have been analyzed for Hf-W isotope systematics to constrain the chronology, internal structure, and thermal history of their parent bodies. For most samples coarse-grained metals plot below the isochrons defined by silicate-dominated fractions which consist of variable mixtures of silicate minerals with tiny metal inclusions. This offset results from an earlier Hf-W closure in the large metal grains and provides a new means for simultaneously determining cooling rates and Hf-W closure ages for individual samples. For most type 5 and 6 samples, cooling rates and Hf-W ages are inversely correlated, indicating that these samples derive from concentrically zoned bodies in which more strongly metamorphosed samples derive from greater depth. These data, therefore, provide strong evidence for a common ‘onion shell’ structure for the H, L, and LL chondrite parent bodies. The cooling rates and Hf-W ages of some type 5 and 6 chondrites overlap, indicating that the Hf-W systematics provide a more robust measure of the thermal history and burial depth of a given sample than the simple petrographic distinction between types 5 and 6. Two type 6 samples deviate from the correlation between cooling rates and Hf-W ages and cooled much faster than expected for their Hf-W age. These samples likely were excavated by impacts that occurred during high-temperature metamorphism and prior to complete closure of the Hf-W system at ~10 Ma after CAI formation. As these impacts would have disturbed the asteroid’s cooling history, these samples likely derive from different bodies than samples with undisturbed cooling histories, implying that ordinary chondrites derive from more than just three parent bodies. The Hf-W data reveal that metal-silicate fractionation among the H, L, and LL groups occurred between ~2 and ~2.7 Ma after CAI formation and, hence, was about coeval to chondrule formation. As both metal-silicate fractionation and chondrule formation occurred prior to chondrite parent body accretion, there should be no ordinary chondrite chondrules that are younger than ~2.7 Ma. In conclusion, ordinary chondrite precursors had lower Hf/W ratios than carbonaceous chondrites, suggesting that inner and outer solar system materials, respectively, were chemically distinct even for refractory elements.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Modeled Performance of the Hathaway Solar Patriot house - Washington D.C

This Dataset contains field research raw data, analysis spreadsheet, photos, and final report from the Hathaway Solar Patriot House Building America Case Study project. This dataset details the monitored and modeled performance of a solar home outside of Washington, D.C. We modeled the home energy performance using DOE 2.2, performed numerous short-terms tests on the home, and monitored its occupied performance for 29 months. The home used modular construction, solar water heating, a ground-coupled heat pump, efficient appliances, and compact fluorescent lighting to reduce its energy consumption by 35% compared to the Building America research benchmark home. The addition of 6kW of photovoltaics (PV) increased the savings to 67% compared to the Building America research benchmark. A more efficient shell to reduce space conditioning loads would have brought the home closer to its zero energy goals. However, even with efficient lighting and appliances, the lights, appliance and plug loads were a significant energy consumer. About 4 kW of PV was required to meet the needs of these loads alone. To achieve the zero energy goal with no further efficiency increases, the Hathaway house would need about 2.6 kW of PV in addition to the 6.0 kW it now has. Applying advanced efficiency measures available or being developed, such as heat-recovery ventilation, superinsulation, and electrochromic windows, could reduce the heating, cooling, and domestic hot water (DHW) energy use to less than 1700 kWh per year, an 88% reduction in these loads from the Building America Benchmark. At this efficiency level, the appliance and plug loads come to dominate energy consumption and account for nearly 70% of the total energy use. This analysis points out that even with highly effective energy-savings technologies (pushed beyond levels currently practical), whole-house energy use reduction by efficiency measures is only about 60% without also reducing the energy use of appliances and plug loads largely considered outside the designers jurisdiction.

Array↗
DOE OSTI2015

PROPAGATION OF THE 2014 JANUARY 7 CME AND RESULTING GEOMAGNETIC NON-EVENT

On 2014 January 7 an X1.2 flare and coronal mass ejection (CME) with a radial speed ≈2500 km s{sup −1} was observed from near an active region close to disk center. This led many forecasters to estimate a rapid arrival at Earth (≈36 hr) and predict a strong geomagnetic storm. However, only a glancing CME arrival was observed at Earth with a transit time of ≈49 hr and a K{sub P} geomagnetic index of only 3−. We study the interplanetary propagation of this CME using the ensemble Wang-Sheeley-Arge (WSA)–ENLIL+Cone model, that allows a sampling of CME parameter uncertainties. We explore a series of simulations to isolate the effects of the background solar wind solution, CME shape, tilt, location, size, and speed, and the results are compared with observed in situ arrivals at Venus, Earth, and Mars. Our results show that a tilted ellipsoid CME shape improves the initial real-time prediction to better reflect the observed in situ signatures and the geomagnetic storm strength. CME parameters from the Graduated Cylindrical Shell model used as input to WSA–ENLIL+Cone, along with a tilted ellipsoid cloud shape, improve the arrival-time error by 14.5, 18.7, 23.4 hr for Venus, Earth, and Mars respectively. These results highlight that CME orientation and directionality with respect to observatories play an important role in understanding the propagation of this CME, and for forecasting other glancing CME arrivals. This study also demonstrates the importance of three-dimensional CME fitting made possible by multiple viewpoint imaging.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

Neutrino-nucleus reactions based on recent structure studies

Neutrino-nucleus reactions are studied with the use of new shell model Hamiltonians, which have proper tensor components in the interactions and prove to be successful in the description of Gamow-Teller (GT) strengths in nuclei. The new Hamiltonians are applied to obtain new neutrino-nucleus reaction cross sections in {sup 12}C, {sup 13}C, {sup 56}Fe and {sup 56}Ni induced by solar and supernova neutrinos. The element synthesis by neutrino processes in supernova explosions is discussed with the new cross sections. The enhancement of the production yields of {sup 7}Li, {sup 11}B and {sup 55}Mn is obtained while fragmented GT strength in {sup 56}Ni with two-peak structure is found to result in smaller e-capture rates at stellar environments. The monopole-based universal interaction with tensor force of π+ρ meson exchanges is used to evaluate GT strength in {sup 40}Ar and ν-induced reactions on {sup 40}Ar. It is found to reproduce well the experimental GT strength in {sup 40}Ar.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2017

Measure the Propagation of a Halo CME and Its Driven Shock with the Observations from a Single Perspective at Earth

We present a detailed study of an Earth-directed coronal mass ejection (full-halo CME) event that happened on 2011 February 15, making use of white-light observations by three coronagraphs and radio observations by Wind /WAVES. We applied three different methods to reconstruct the propagation direction and traveling distance of the CME and its driven shock. We measured the kinematics of the CME leading edge from white-light images observed by Solar Terrestrial Relations Observatory ( STEREO ) A and B , tracked the CME-driven shock using the frequency drift observed by Wind /WAVES together with an interplanetary density model, and obtained the equivalent scattering centers of the CME by the polarization ratio (PR) method. For the first time, we applied the PR method to different features distinguished from LASCO/C2 polarimetric observations and calculated their projections onto white-light images observed by STEREO-A and STEREO-B . By combining the graduated cylindrical shell (GCS) forward modeling with the PR method, we proposed a new GCS-PR method to derive 3D parameters of a CME observed from a single perspective at Earth. Comparisons between different methods show a good degree of consistence in the derived 3D results.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Thermal Insulation for a High Temperature Molten Salt Storage Tank in a CSP Plant

A ternary molten chloride has been suggested as a high temperature (550-720 °C) sensible heat storage medium for a two-tank system. An effective thermal insulation is proposed to provide an opportunity for the fabrication of both the hot and cold storage tanks from lower cost metals, e.g. A240-347H, by maintaining the tank wall below 500 °C. To achieve this, the hot storage tank mainly comprises of inner shell (11.4 cm of a refractory brick as liner (KX-99®), 30 cm of insulation brick) and outer metal shell, where 5 cm of frozen layer of PCM800 (NaCl), and 5 cm of ceramic wool fill the annular space between the shells. Another layer of ceramic wool was introduced at the outer side of the metal shell to keep the temperature lower than 60 °C. ANSYS Fluent was used for the numerical study of the cool down behavior of the system during idle period when tank is quarter-filled. The heat transfer modes were considered as radiation and natural convection heat transfer from the hot molten salt at 720 °C, conduction through the solid layers and convection heat transfer from the outer shell to the environment at 15 °C. The results showed that the proposed insulation system including a frozen layer of PCM800 maintains the temperature at the metal wall lower than 500 °C, and lower than 60°C at the outer side of the tank. Apart from the insulation property of the frozen layer of PCM800, it absorbs any leak of hot molten salt, acting as a barrier between salt and the metal shell. The thermal performance analysis provide an insight into the benefits of the multilayer insulation.

41 EE - Solar Energy Technologies Office (EE-4S)↗