Search NASA⌕ Search

SEARCH · Search NASA

Results for “Skin Temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Satellite Validation: A Project to Create a Data-Logging System to Monitor Lake Tahoe

Flying aboard the satellite Terra, the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) is an imaging instrument used to acquire detailed maps of Earth's surface temperature, elevation, emissivity, and reflectance. An automated site consisting of four buoys was established 6 years ago at Lake Tahoe for the validation of ASTERS thermal infrared data. Using Campbell CR23X Dataloggers, a replacement system to be deployed on a buoy was designed and constructed for the measurement of the lake's temperature profile, surrounding air temperature, humidity, wind direction and speed, net radiation, and surface skin temperature. Each Campbell Datalogger has been programmed to control, power, and monitor 14 different temperature sensors, a JPL-built radiometer, and an RM Young 32500 meteorological station. The logger communicates with the radiometer and meteorological station through a Campbell SDM-SIO4 RS232 serial interface, sending polling commands, and receiving filtered data back from the sensors. This data is then cataloged and sent back across a cellular modem network every hour to JPL. Each instrument is wired via a panel constructed with 18 individual plugs that allow for simple installation and expansion. Data sent back from the system are analyzed at JPL, where they are used to calibrate ASTER data.

Roy, Rudy A.↗
NASA NTRS1992

Arctic ice surface temperature retrieval from AVHRR thermal channels

The relationship between AVHRR thermal radiances and the surface (skin) temperature of Arctic snow-covered sea ice is examined through forward calculations of the radiative transfer equation, providing an ice/snow surface temperature retrieval algorithm for the central Arctic Basin. Temperature and humidity profiles with cloud observations collected on an ice island during 1986-1987 are used. Coefficients that correct for atmospheric attenuation are given for three Arctic clear sky 'seasons', as defined through statistical analysis of the daily profiles, for the NOAA 7, 9, and 11 satellites. Modeled directional snow emissivities, different in the two split-window (11 and 12 micron) channels, are used. While the sensor scan angle is included explicitly in the correction equation, its effect in the dry Arctic atmosphere is small, generally less than 0.1 K. Using the split-window channels and scan angle, the rms error in the estimated ice surface temperature is less than 0.1 K in all seasons. Inclusion channel 3(3.7 microns) during the winter decreases the rms error by less than 0.003

Key, J.↗
NASA NTRS1984

Results of the joint NASA/NOAA AMTS/HIRS2 sounding simulation test

The relative accuracies of atmospheric temperature profiles retrieved from HIRS2, the current operational infra-red temperature sounder, and AMTS, a proposed advanced high-spectral resolution infra-red sounder were compared. The sounding simulation test compared retrievals generated by GLAS, using their physical retrieval algorithm, and NESDIS, using their operational statistical regression algorithm, for both instruments under clear and cloudy conditions. Test results for both conditions are summarized in tables showing RMS temperature errors for 18 tropospheric layers, 4 stratospheric layers, and surface skin temperature. The improvement of the AMTS instrument over HIRS2, particularly for cloudy conditions is demonstrated. The GLAS retrievals are more accurate than the operational NESDIS retrieval, especially with increasing cloud cover.

Susskind, J.↗
NASA NTRS1996

Operational Characteristics of Two Commercially Available Personal Cooling Vests

Personal thermoregulatory systems which provide chest cooling are used in the industrial and aerospace environments to alleviate thermal stress. However, little information is available regarding the physiologic and circulatory changes produced by routine operation of these systems. The objectives of this study were to compare the effectiveness of two passive cooling vests, and to measure the body temperature and circulatory changes produced by each cooling vest configuration. A Life Enhancement Technologies, (LET) ice vest garment and a Steele, Inc. vest were used to cool the chest region of 11 male subjects (25 to 55 yr) in this study. Calf, forearm and finger blood flows were measured using a tetrapolar impedance rheograph. The subjects, seated in an upright position at normal room temperature (approximately 21 C) were tested for 60 min. with the cooling system operating at its maximum cooling capacity. Blood flows were recorded continuously using a computer data acquisition system with a sampling frequency of 250 Hz. Oral, right and left ear temperatures and cooling system parameters were logged manually every 5 min. Arm, leg, chest and rectal temperatures; heart rate; respiration; and an activity index were recorded continuously on a U.F.I., Inc. Biolog ambulatory monitor. No significant differences were found in either the oral or ear temperature responses to the two vests. However, the rectal and mean skin temperatures at the end of the cooling period were both significantly lower (P less than 0.05), approximately 0.2 and 1.9 C, respectively for the LET vest than for the Steele garment. These data show that different vest configurations may produce different thermal responses in healthy male subjects which should be considered in the use of these cooling garments.

Ku, Yu-Tsuan E.↗
NASA NTRS1994

Toward a dynamic-thermodynamic assimilation of satellite surface temperature in numerical atmospheric models

An assimilation technique is described in which satellite-observed surface skin temperature tendencies are used in a model surface energy budget so that the predicted rate of temperature change in the model more closely agrees with the satellite observations. Both visible and infrared GOES satellite data are used in the assimilation. The technique is based on analytically recovering surface moisture from similarity expressions derived from an evapotranspiration residual obtained as a difference between the unadjusted model evapotranspiration and the satellite-inferred evapotranspiration. The technique has application in regional-scale models where surface parameters such as root zone moisture, soil moisture, etc., are unknown. It is assumed that the largest error in the surface energy budget is in the evapotranspiration term. Two tests are given for the technique, first, a one-dimensional test against FIFE data and, second, a three-dimensional test over Oklahoma. In these cases the technique appears to correctly adjust the model response to agree better with observations.

Mcnider, Richard T.↗
NASA NTRS1996

Surface Turbulent Fluxes Over Pack Ice Inferred from TOVS Observations

A one-dimensional, atmospheric boundary layer model is coupled to a thermodynamic ice model to estimate the surface turbulent fluxes over thick sea ice. The principal forcing parameters in this time-dependent model are the air temperature, humidity, and wind speed at a specified level (either at 2 m or at 850 mb) and the downwelling surface radiative fluxes. The free parameters. are the air temperature, humidity, and wind speed profiles below the specified level, the surface skin temperature, the ice temperature profile, and the surface turbulent fluxes. The goal is to determine how well we can estimate the turbulent surface heat and momentum fluxes using forcing parameters from atmospheric temperatures and radiative fluxes retrieved from the TIROS-N Operational Vertical Sounder (TOVS) data. Meteorological observations from the Lead Experiment (LeadEx, April 1992) ice camp are used to validate turbulent fluxes computed with the surface observations and the results are used to compare with estimates based on radio-sonde observations or with estimates based on TOVS data. We find that the TOVS-based estimates of the stress are significantly more accurate than those found with a constant geostrophic drag coefficient, with a root-mean-square error about half as large. This improvement is due to stratification effects included in the boundary layer model. The errors in the sensible heat flux estimates, however, are large compared to the small mean values observed during the field experiment.

Lindsay, R. W.↗
NASA NTRS2004

Validation of EOS Aqua AMSR Sea Ice Products for East Antarctica

This paper presents results from AMSR-E validation activities during a collaborative international cruise onboard the RV Aurora Australis to the East Antarctic sea ice zone (64-65 deg.S, 110-120 deg.E) in the early Austral spring of 2003. The validation strategy entailed an IS-day survey of the statistical characteristics of sea ice and snowcover over a Lagrangian grid 100 x 50 km in size (demarcated by 9 drifting ice beacons) i.e. at a scale representative of Ah4SR pixels. Ice conditions ranged h m consolidated first-year ice to a large polynya offshore from Casey Base. Data sets collected include: snow depth and snow-ice interface temperatures on 24 (?) randomly-selected floes in grid cells within a 10 x 50 km area (using helicopters); detailed snow and ice measurements at 13 dedicated ice stations, one of which lasted for 4 days; time-series measurements of snow temperature and thickness at selected sites; 8 aerial photography and thermal-IR radiometer flights; other satellite products (SAR, AVHRR, MODIS, MISR, ASTER and Envisat MERIS); ice drift data; and ancillary meteorological (ship-based, meteorological buoys, twice-daily radiosondes). These data are applied to a validation of standard AMSR-E ice concentration, snowcover thickness and ice-temperature products. In addition, a validation is carried out of ice-surface skin temperature products h m the NOAA AVHRR and EOS MODIS datasets.

Massom, Rob↗
NASA NTRS2001

Intercomparison of GOES-8 Imager and Sounder Land Surface Temperature Retrievals

Recent studies at the Global Hydrology and Climate Center (GHCC) have shown that the assimilation of land skin temperature (LST) tendencies into a mesoscale model can significantly improve short term forecasts of near surface temperature and moisture. The high spatial and temporal resolution of GOES derived land surface products provide valuable information about the spatial and temporal variability of the land surface forcing simulated in the model. In the GHCC studies LST was derived using a split window technique requiring at least two longwave infrared window channels and thus, utilized the 11 and 12 micron channels found on the GOES-8 Imager with a nadir spatial resolution of 4km. However, beginning with the launch of GOES-M (scheduled for mid 2001 ) and subsequent satellites the 12 micron channel will be removed from the Imager leaving only one longwave window channel. The GOES Sounder will continue to have more than one longwave infrared window channel (including a 12 micron channel) but, with a spatial resolution of 10 km nadir. LST retrievals from the newer GOES satellites will thus be derived from Sounder measurements at a reduced spatial resolution. This paper intercompares the LST retrievals from the GOES-8 Imager and Sounder. The effects on the LST retrievals due to the Sounder's reduced resolution from that of the Imager and its different longwave infrared channel characteristics are examined. The effects of transitioning from Imager to Sounder LST products on the results from model assimilation of these products are also examined.

Suggs, Ronnie J.↗
NASA NTRS2016

Validation of AIRS V6 Surface Temperature over Greenland with GCN and NOAA Stations

This work compares the temporal and spatial characteristics of the AIRSAMSU (Atmospheric Infrared Sounder Advanced Microwave Sounding Unit A) Version 6 and MODIS (Moderate resolution Imaging Spectroradiometer) Collection 5 derived surface temperatures over Greenland. To estimate uncertainties in space-based surface temperature measurements, we re-projected the MODIS Ice Surface Temperature (IST) to 0.5 by 0.5 degree spatial resolution. We also re-gridded AIRS Skin Temperature (Ts) into the same grid but classified with different cloud conditions and surface types. These co-located data sets make intercomparison between the two instruments relatively straightforward. Using this approach, the spatial comparison between the monthly mean AIRS Ts and MODIS IST is in good agreement with RMS 2K for May 2012. This approach also allows the detection of any long-term calibration drift and the careful examination of calibration consistency in the MODIS and AIRS temperature data record. The temporal correlations between temperature data are also compared with those from in-situ measurements from GC-Net (GCN) and NOAA stations. The coherent time series of surface temperature evident in the correlation between AIRS Ts and GCN temperatures suggest that at monthly time scales both observations capture the same climate signal over Greenland. It is also suggested that AIRS surface air temperature (Ta) can be used to estimate the boundary layer inversion.

AIRS↗
NASA NTRSDate not supplied

Assessing Uncertainties and Variability 34 Years of Surface Radiative Fluxes Using GEWEX SRB Release4-IP

The NASA/GEWEX Surface Radiation Budget (SRB) project produces 3-hrly shortwave and longwave surface and top of atmosphere radiative fluxes for the 1983-near present time period. The new Release 4 Integrated Product (IP) uses the newly recalibrated and processed ISCCP HXS product as its primary input for cloud and radiance data, replacing ISCCP DX with a ninefold increase in pixel count (10 km instead of 30 km). This first version retains a 1°x1° resolution enabling intercomparison against previous versions and other data sets such as CERES, but spans 34 years from July 1983 through June 2017 and was announced by Kummerow et al. 2019 (GEWEX News). This new IP product also uses an atmospheric temperature and moisture dataset known as nnHIRS and other parameters such as near surface and skin temperatures from SeaFlux and LandFlux data sets. In addition to the input data improvements, several important algorithm improvements have been made since Release 3. These include recalculated SW atmospheric transmissivities and reflectivities, updated ocean and snow/ice albedos, and variable total solar irradiance consistent with SORCE measurements. The LW code has been updated to improve the optical property treatment for clouds and aerosols are included in this version. Radiative treatment of ice clouds is also improved in the LW. The variable aerosol optical properties for the SW and LW are specified using a detailed aerosol history from the Max Planck Institute Aerosol Climatology (MAC). Here we present an assessment of the LW radiative fluxes and the uncertainty of those fluxes relative to the various inputs to surface SW/LW flux measurements from BSRN and PMEL buoys measurements. We review the validation of the SW and LW fluxes and then in terms of time series and then assess the products in terms of their long-term variability of the surface SW and LW net fluxes compared to multiple other data products including atmospheric reanalysis products. The comparisons of radiative estimates to observations are performed at various temporal scales and aimed at investigation of agreement at longer time averages but accessing potential change in diurnal magnitude and daily variability. Utilizing this uncertainty information, to access long-term variability of surface radiation components at selected region and global scales, considering satellite sampling/calibration “artifacts” as necessary. At the longer time scales, the net SW and net LW the TOA and surface have implications toward closure of the energy budgets at the surface, we assess these compared to other studies on energy budget closure for the same selected global and regional scales.

Paul W Stackhouse↗
NASA NTRS1972

External auditory canal temperature as an estimate of core temperature.

Measurement of rectal (T sub re), auditory canal (T sub ac), positioned 8 to 10 mm from the tympanic membrane, and mean skin temperature (mean T sub sk) in five men during various exercise regimens at an ambient temperature (T sub a) of 25 C (phase one) and in two men during rest and exercise at 5, 15, 25, and 35 C T sub a (phase two). The purpose was to determine if T sub ac can be used as an accurate estimate of core temperature. Previous observations that T sub ac was highly correlated with T sub re but T sub ac was consistently lower than T sub re are confirmed; the mean difference varied from 0.4 C at rest to 1.1 C at the end of exercise. It is concluded that auditory canal temperature cannot be utilized as an estimate of core temperature, but T sub ac may be used to estimate mean body temperature where very accurate measurements are not required.

Greenleaf, J. E.↗
NASA NTRS2003

Broadband IR Measurements for Modis Validation

The primary objective of this research was the development and deployment of autonomous shipboard systems for infrared measurement of ocean surface skin temperature (SST). The focus was on demonstrating long-term, all-weather capability and supplying calibrated skin SST to the MODIS Ocean Science Team (MOCEAN). A secondary objective was to investigate and account for environmental factors that affect in situ measurements of SST for validation of satellite products. We developed and extensively deployed the Calibrated, InfraRed, In situ Measurement System, or CIRIMS, for at-sea validation of satellite-derived SST. The design goals included autonomous operation at sea for up to 6 months and an accuracy of +/- 0.1 C. We used commercially available infrared pyrometers and a precision blackbody housed in a temperature-controlled enclosure. The sensors are calibrated at regular interval using a cylindro-cone target immersed in a temperature-controlled water bath, which allows the calibration points to follow the ocean surface temperature. An upward-looking pyrometer measures sky radiance in order to correct for the non-unity emissivity of water, which can introduce an error of up to 0.5 C. One of the most challenging aspects of the design was protection against the marine environment. A wide range of design strategies to provide accurate, all-weather measurements were investigated. The CIRIMS uses an infrared transparent window to completely protect the sensor and calibration blackbody from the marine environment. In order to evaluate the performance of this approach, the design incorporates the ability to make measurements with and without the window in the optical path.

Jessup, Andrew T.↗
NASA NTRS1989

An investigation of satellite sounding products for the remote sensing of the surface energy balance and soil moisture

Improved techniques for the remote sensing of the land surface energy balance (SEB) and soil moisture would greatly improve prediction of climate and weather as well as be of benefit to agriculture, hydrology and many associated fields. Most of the satellite remote sensing methods which were researched to date rely upon satellite-measured infrared surface temperatures or their time changes as a remote sensing signal. Optimistically, only four or five levels of information (wet to dry) in surface heating/evaporation are discernable by surface temperature methods and a good understanding of atmospheric conditions is necessary to bring them to this accuracy level. Skin temperature methods were researched as well as begun work on several new methods for the remote sensing of the SEB, some elements of which are applicable to current and retrospective data sources and some which will rely on instrumentation from the Earth Observing System (EOS) program in the 1990s.

Diak, George R.↗
NASA NTRS2001

Results from Global Land-Surface Data Assimilation Methods

Realistic representation of the land surface is crucial in global climate modeling (GCM). Recently, the Mosaic land-surface Model (LSM) has been driven off-line using GEOS DAS (Goddard Earth Observing System Data Assimilation System) atmospheric forcing, forming the Off-line Land-surface Global Assimilation (OLGA) system. This system provides a computationally efficient test bed for land surface data assimilation. Here, we validate the OLGA simulation of surface processes and the assimilation of ISCCP surface temperatures. Another component of this study as the incorporation of the Physical-space Statistical Analysis System (PSAS) into OLGA, in order to assimilate surface temperature observations from the International Satellite Cloud Climatology Project (ISCCP). To counteract the subsequent forcing of the analyzed skin temperature back to the initial state following the analysis. incremental bias correction (IBC) was included in the assimilation. The IBC scheme effectively removed the time mean bias, but did not remove him in the mean diurnal cycle. Therefore, a diurnal him correction (DBC) scheme was developed, where the time-dependent bias was modeled with a sine wave parameterization. In addition, quality control of the ISCCP data and anisotropic temperature correction were implemented in PSAS. Preliminary results showed a substantial impact from the inclusion of PSAS and DBC that was visible in the surface meteorology fields and energy budget. Also, the monthly mean diurnal cycle from the experiment closely matched the diurnal cycle from the observations.

Radakovich, Jon D.↗
NASA NTRSDate not supplied

Remote Sensing of Atmospheric Temperature, Water Vapor, Trace Gases, Cloud, and Surface Properties on Daily and Decadal Time Scales

Hyperspectral IR sounders such as AIRS on Aqua, CrIS on S-NPP, NOAA20 and JPSS-2, IASI on Metop A, B, and C provide high-quality atmospheric temperature, water, vapor, and greenhouse gas vertical profiles. Additionally, they provide atmospheric cloud properties, surface emissivity, and surface skin temperatures. We have developed two algorithms which can consistently derive these products from multiple IR sounders. The first one is a Single Field-of-view Sounder Atmospheric Product (SIFSAP) algorithm and the second one is a Climate Fingerprinting Sounder Product (ClimFiSP) algorithm. The SiFSAP algorithm performs one retrieval for each FOV using an all-sky optimal estimation approach. The core of the SiFSAP algorithm is an accurate and fast Principal Component-based Radiative Transfer Model (PCRTM), which can calculate hyperspectral radiance spectra under both clear and cloudy conditions. The PCRTM was developed in the past decade using consistent reference line-by-line radiative transfer model and spectroscopy for hyperspectral sounders such as AIRS, CrIS, IASI, NAST-I, and S-HIS. The ClimFiSP algorithm, which performs retrievals from spatiotemporally averaged L1 hyperspectral radiances directly, will be orders of magnitude faster than traditional method. he ClimFiSP algorithm uses consistent radiative kernels and a robust spectral fingerprinting method. It provides accurate data climate data fusion products from multiple satellite sensors. Both SiFSAP and ClimFiSP will be available at NASA GES DISC data center for public access.

Xu Liu↗
NASA NTRSDate not supplied

Development of Radiative Transfer Models and Retrieval Algorithms for Satellite Remote Sensors

Hyperspectral IR sounders such as AIRS on Aqua, CrIS on S-NPP, NOAA20 and JPSS-2, IASI on Metop A, B, and C provide high-quality atmospheric temperature, water, vapor, and greenhouse gas vertical profiles. Additionally, they provide atmospheric cloud properties, surface emissivity, and surface skin temperatures. We have developed two algorithms which can consistently derive these products from multiple IR sounders. The first one is a Single Field-of-view Sounder Atmospheric Product (SIFSAP) algorithm and the second one is a Climate Fingerprinting Sounder Product (ClimFiSP) algorithm. The SiFSAP algorithm performs one retrieval for each FOV using an all-sky optimal estimation approach. The core of the SiFSAP algorithm is an accurate and fast Principal Component-based Radiative Transfer Model (PCRTM), which can calculate hyperspectral radiance spectra under both clear and cloudy conditions. The PCRTM was developed in the past decade using consistent reference line-by-line radiative transfer model and spectroscopy for hyperspectral sounders such as AIRS, CrIS, IASI, NAST-I, and S-HIS. The ClimFiSP algorithm, which performs retrievals from spatiotemporally averaged L1 hyperspectral radiances directly, will be orders of magnitude faster than traditional method. he ClimFiSP algorithm uses consistent radiative kernels and a robust spectral fingerprinting method. It provides accurate data climate data fusion products from multiple satellite sensors. Both SiFSAP and ClimFiSP will be available at NASA GES DISC data center for public access.

Xu Liu↗