Search NASA⌕ Search

SEARCH · Search NASA

Results for “Smoothing methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Anti-Icing Coatings using Ionomer Film Layer Structuring

This research effort examined the application of Nafion polymers in alcohol solvents as an anti-ice surface coating, as a mixture with hydrophilic polymers and freezing point depressant salt systems. Co-soluble systems of Nafion, polymer and salt were applied using dip coating methods to create smooth films for frost observation over a Peltier plate thermal system in ambient laboratory conditions. Cryo-DSC was applied to examine freezing events of the Nafion-surfactant mixtures, but the sensitivity of the measurement was insufficient to determine frost behavior. Collaborations with the Fog Chamber at Sandia-Albuquerque, and in environmental SAXS measurements with CINT-LANL were requested but were not able to be performed under the research duration. Since experimental characterization of these factors is difficult to achieve directly, computational modeling was used to guide the scientific basis for property improvement. Computational modeling was performed to improve understanding of the dynamic association between ionomer side groups and added molecules and deicing salts. The polyacrylic acid in water system was identified at the start of the project as a relevant system for exploring the effect of varying counterions on the properties of fully deprotonated polyacrylic acid (PAA) in the presence of water. Simulations were modeled with four different counterions, two monovalent counterions (K+ and Na+) and two divalent counterions (Ca2+ and Mg2+). The wt% of PAA in these systems was varied from ~10 to 80 wt% PAA for temperatures from 250K to 400K. In the second set of simulations, the interpenetration of water into a dry PAA film was studied for Na+ or Ca2+ counterions for temperatures between 300K and 400K. The result of this project is a sprayable Nafion film composite which resists ice nucleation at -20 °C for periods of greater than three hours. It is composed of Nafion polymer, hydrophilic polyethylene oxide polymer and CaCl2 anti-ice crosslinker. Durability and field performance properties remain to be determined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Exchange of Mass and Angular Momentum in the Impact Event of Ice Giant Planets: Implications for the Origin of Uranus

Uranus has a tilted rotation axis, which is supposed to have been caused by a giant impact. In general, an impact event also changes the internal compositional distribution and drives mass ejection from the planet, which may provide the origin of satellites. Previous studies of the impact simulation of Uranus investigated the resultant angular momentum and the ejected mass distribution. However, the effect of changing the initial condition of the thermal and compositional structure is not studied. In this paper, we perform hydrodynamics simulations for the impact events of Uranus-size ice giants composed of a water core surrounded by a hydrogen envelope using two variant methods of the smoothed particle hydrodynamics. We find that the higher-entropy target loses its envelope more efficiently than the low-entropy target. However, the higher-entropy target gains more angular momentum than the lower-entropy target since the higher-entropy target has a more expanded envelope. We discuss the efficiency of angular momentum transport and the amount of the ejected mass and find a simple analytical model to roughly reproduce the outcomes of numerical simulations. We suggest the range of possible initial conditions for the giant impact on proto-Uranus that reproduces the present rotation tilt of Uranus and sufficiently provides the total angular momentum of the satellite system that can be created from the fragments from the giant impact.

79 ASTRONOMY AND ASTROPHYSICS↗

Simulation of dynamic fracture using peridynamics, finite element modeling, and contact.

Peridynamics is a nonlocal extension of classical solid mechanics that allows for the modeling of bodies in which discontinuities occur spontaneously. Because the peridynamic expression for the balance of linear momentum does not contain spatial derivatives and is instead based on an integral equation, it is well suited for modeling phenomena involving spatial discontinuities such as crack formation and fracture. In this study, both peridynamics and classical finite element analysis are applied to simulate material response under dynamic blast loading conditions. A combined approach is utilized in which the portion of the simulation modeled with peridynamics interacts with the finite element portion of the model via a contact algorithm. The peridynamic portion of the analysis utilizes an elastic-plastic constitutive model with linear hardening. The peridynamic interface to the constitutive model is based on the calculation of an approximate deformation gradient, requiring the suppression of possible zero-energy modes. The classical finite element portion of the model utilizes a Johnson-Cook constitutive model. Simulation results are validated by direct comparison to expanding tube experiments. The coupled modeling approach successfully captures material response at the surface of the tube and the emerging fracture pattern. The coupling of peridynamics and finite element analysis via a contact algorithm has been shown to be a viable means for simulating material fracture in a high-velocity impact experiment. A combined peridynamics/finite element approach was applied to model an expanding tube experiment performed by Vogler, et al., in which loading on the tube is a result of Lexan slugs impacting inside the tube. The Lexan portion of the simulation was modeled with finite elements and a Johnson-Cook elastic-plastic material model in conjunction with an equation-of-state law. The steel tube portion of the simulation was modeled with peridynamics, an elastic-plastic material model, and a critical stretch bond damage model. The application of peridynamics to the tube portion of the model allowed the capture of the formation of cracks and eventual fragmentation of the tube. The simulation results yielded good agreement with the experimental results published by Vogler, et al., for the velocity and displacement profiles on the surface of the tube and the resulting fragment distribution. Numerical difficulties were encountered that required removal of hexahedron elements from the Lexan portion of the model over the course of the simulation. The significant number of inverted and nearly-inverted elements appearing over the course of the simulation is believed to be a result of irregularities in the contact between the Lexan and AerMet portions of the model, and was likely exacerbated by the ultra-high strength of the AerMet tube. Future simulations are planned in which the Lexan portion of the simulation is modeled with peridynamics, or with an alternative method such as smoothed particle hydrodynamics, with the goal of reducing these numerical difficulties.

36 MATERIALS SCIENCE↗

Smoothed Particle Hydrodynamics Stochastic Model for Flow and Transport in Porous Media

A meso-scale stochastic Lagrangian particle model was developed and used to simulate conservative and reactive transport in porous media. In the stochastic model, the fluid flow in a porous continuum is governed by a combination of a Langevin equation and continuity equation. Pore-scale velocity fluctuations, the source of hydrodynamic dispersion, are represented by the white noise. A smoothed particle hydrodynamics method was used to solve the governing equations. Changes in the properties of the fluid particles (e.g., the solute concentration) are governed by the advection-diffusion equation. The separate treatment of advective and diffusive mixing in the stochastic transport model is more realistic than the classical advection-dispersion theory, which uses a single effective diffusion coefficient (the dispersion coefficient) to describe both types of mixing leading to over-prediction of mixing induced effective reaction rates. The stochastic model predicts much lower reaction product concentrations in mixing induced reactions. In addition, the dispersion theory predicts more stable fronts (with a higher effective fractal dimension) than the stochastic model during the growth of Rayleigh-Taylor instabilities.

Langevin equation, dispersion↗

Recent Hydrodynamic Modeling Enhancements in OpenFAST: Preprint

To improve the hydrodynamic modeling capabilities of the offshore wind design and modeling tool OpenFAST, a restructuring of the HydroDyn hydrodynamics module was undertaken with several new features implemented. The generation of the wave field is now separated from HydroDyn into a new module called SeaState. Unlike previous versions of HydroDyn, which precomputed the wave kinematics at the undisplaced positions of the hydrodynamic nodes, the new SeaState module computes the complete time history of the wave field at the vertices of a user-defined wave grid. During the simulation, the wave kinematics at any point within the grid can be efficiently interpolated, allowing the strip-theory wave loads to be evaluated based on the wave kinematics at the displaced structure position. A phase correction was also implemented for the potential-flow wave-exciting loads to account for large structure displacements. Several wave-stretching methods were implemented for the strip-theory solution along with a wave-load redistribution method that ensures smooth variation of the nodal loads as the nodes of a discrete hydrodynamic mesh enter and exit the water. The load smoothing is included to avoid the excitation of unphysical high-frequency structural vibration during hydroelastic simulations. The MacCamy-Fuchs diffraction correction for the strip-theory solution and the capability to insert a constrained NewWave into extreme stochastic sea states with directional spreading were also added. The present article documents the formulations of the new improvements to HydroDyn with example applications and numerical results.

constrained wave↗

Adaptive Smoothed Finite Elements (ASFEM) for history dependent material models

A successful simulation of a bulk forming process with finite elements can be difficult due to distortion of the finite elements. Nodal smoothed Finite Elements (NSFEM) are an interesting option for such a process since they show good distortion insensitivity and moreover have locking-free behavior and good computational efficiency. In this paper a method is proposed which takes advantage of the nodally smoothed field. This method, named adaptive smoothed finite elements (ASFEM), revises the mesh for every step of a simulation without mapping the history dependent material parameters. In this paper an updated-Lagrangian implementation is presented. Several examples are given to illustrate the method and to show its properties.

36 MATERIALS SCIENCE↗

Enhanced multiscale restriction-smoothed basis (MsRSB) preconditioning with applications to porous media flow and geomechanics

A novel method to enable application of the Multiscale Restricted Smoothed Basis (MsRSB) method to non M-matrices is presented. The original MsRSB method is enhanced with a filtering strategy enforcing M-matrix properties to enable the robust application of MsRSB as a preconditioner. Through applications to porous media flow and linear elastic geomechanics, the method is proven to be effective for scalar and vector problems with multipoint finite volume (FV) and finite element (FE) discretization schemes, respectively. Realistic complex (un)structured two- and three-dimensional test cases are considered to illustrate the method's performance.

58 GEOSCIENCES↗

A smooth contact algorithm for the combined finite discrete element method

From its inception, the combined finite discrete element method has used a distributed potential contact force algorithm to resolve interaction between finite elements. The contact interaction algorithm relies on evaluation of the contact force potential field. The problem with existing algorithms is that the potential field introduces artificial numerical non-smoothness in the contact force. This work introduces a smooth potential field based on the finite element topology, and a generalized contact interaction law is constructed on top of the smooth potential field. Further, a number of validation cases for the proposed algorithm, considering different shapes of discrete elements, are presented, and detailed aspects of the proposed contact interaction law are tested with numerical examples.

97 MATHEMATICS AND COMPUTING↗

Coordinate-Based Seismic Interpolation in Irregular Land Survey: A Deep Internal Learning Approach

Physical and budget constraints often result in irregular sampling, which complicates accurate subsurface imaging. Preprocessing approaches, such as missing trace or shot interpolation, are typically employed to enhance seismic data in such cases. Recently, deep learning has been used to address the trace interpolation problem at the expense of large amounts of training data to adequately represent typical seismic events. Nonetheless, most research in this area has focused on trace reconstruction, with little attention having been devoted to shot interpolation. Furthermore, existing methods assume regularly spaced receivers/sources failing in approximating seismic data from real (irregular) surveys. This work presents a novel shot gather interpolation approach which uses a continuous coordinate-based representation of the acquired seismic wavefield parameterized by a neural network. The proposed unsupervised approach, which we call coordinate-based seismic interpolation (CoBSI), enables the prediction of specific seismic characteristics in irregular land surveys without using external data during neural network training. Importantly, experimental results on real and synthetic 3-D data validate the ability of the proposed method to estimate continuous smooth seismic events in the time-space and frequency-wavenumber domains, improving sparsity or low-rank-based interpolation methods.

58 GEOSCIENCES↗

Material Model Parameters Optimization in Liquid Mercury Target Dynamics Simulation With Machine Learning Surrogates

A pulsed spallation target is subjected to very short (∼0.7μs) but intense loads (23.3 kJ) from repeated proton pulses, which knock away neutrons from the mercury atoms’ nuclei for a wide range application in physics, engineering, medicine, petroleum exploration, biology, chemistry, etc. The effect of this pulsed loading on the stainless-steel target module which contains the flowing mercury target material is difficult to predict not only due to its short but intense explosive-like physical reaction, but also the nonlinear material behavior of the liquid mercury in the structure. Injecting small helium bubbles in the mercury has been an efficient method of mitigating the pressure wave at high power level stage. However, prediction of the resultant loading on the target is more difficult when helium gas is intentionally injected into the mercury. A 2-phase material model that incorporates the Rayleigh-Plesset (R-P) model is expected to address this complex multi-physics dynamics problem by including the bubble dynamics in the liquid mercury. A parameter sensitivity study was firstly employed to understand their impact on the simulation strains. The investigated parameters included E, μ, γ, σ, n, VFgas, and gas cumulative volume curve control parameters a and b. Verification and validation results from sparse polynomial expansions (SPE) method and directional Gaussian smoothing (DGS) optimization show that the surrogate model had training error of ∼7% and validation error of ∼15%, indicating that machine learning methods and surrogate models can help optimize the uncertain parameters in the complex 2-phase material model. This approach is expected to fill the knowledge gap between unknown liquid-gas mixture material model and measured vessel strain responses.

Lin, Lianshan↗

Updated External Exposure Dose Coefficients

In 2018, the Environmental Protection Agency (EPA) updated and expanded the Federal Guidance Report (FGR) No. 12 to No. 15; tabulating age-specific external exposure effective dose rate coefficients for 1,252 radionuclides in the air, water, and soil (EPA 2018). However, the EPA discovered errors in the tables of dose coefficients for soil which led to the report being retracted for correction. This led to the adoption of “a uniform method of data-smoothing and extrapolation of monoenergetic organ doses at low energies across all exposure pathways; the originally-published dose coefficients utilized different methods for each media type” (EPA 2019). This resulted in all the external exposure dose coefficients being updated and FGR 15 being republished in August 2019 with corrected tables.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Bayesian methods for discontinuity detection in climate model predictions.

Discontinuity detection is an important component in many fields: Image recognition, Digital signal processing, and Climate change research. Current methods shortcomings are: Restricted to one- or two-dimensional setting, Require uniformly spaced and/or dense input data, and Give deterministic answers without quantifying the uncertainty. Spectral methods for Uncertainty Quantification with global, smooth bases are challenged by discontinuities in model simulation results. Domain decomposition reduces the impact of nonlinearities and discontinuities. However, while gaining more smoothness in each subdomain, the current domain refinement methods require prohibitively many simulations. Therefore, detecting discontinuities up front and refining accordingly provides huge improvement to the current methodologies.

54 ENVIRONMENTAL SCIENCES↗

Meshfree Methods

Meshfree methods have undergone substantial development and have received much attention in the last two decades. This new family of numerical methods is designed to inherit the main advantages of the finite element method such as compact supports of shape functions and good approximation properties while, at the same time, overcome the main disadvantages of the finite element method caused by the mesh dependence. The meshfree methods share a common feature that no mesh is needed and shape functions are constructed from sets of points, thus eliminating the need for time consuming mesh generation. The most significant advantage of meshfree methods is the flexibility in customizing approximation functions for desired regularity and for capturing essential physics and features of the particular problems of interest. Adaptivity formulation and multiple-scale solution strategies also can be implemented with relative ease. It has become clear that the meshfree methods provide considerable advantages over the conventional finite element methods in solving problems involving moving discontinuities, evolving material interfaces, multiple-scale phenomena, large material distortion and structural deformation, and fracture and damage processes. This Chapter gives an overview of many classes of meshfree methods, with more detailed discussions on Smoothed Particle Hydrodynamics (SPH), the Reproducing Kernel Particle Method (RKPM), Peridynamics (PD), the Material Point Method (MPM), as well as their applications in various challenging engineering problems.2

Chen, Jiun-Shyan↗

Synthesis and microwave dielectric characteristics of high-Q Li2MgxTiO3+x ceramics system

Highlights: • A laminated sintering technique was adopted to prevent lithium volatilization. • The sintering behavior and microwave dielectric properties of Li{sub 2}Mg{sub x}TiO{sub 3+x} (2.2 ≤ x ≤ 4) ceramics were investigated. • The Li{sub 2}Mg{sub 3.6}TiO{sub 6.6} ceramics had excellent microwave dielectric properties of ε{sub r} ∼ 12.7, Q × f ∼ 169,000 GHz, τ{sub f} ∼ −32.8 ppm/°C. - Abstract: High-Q Li{sub 2}Mg{sub x}TiO{sub 3+x} (2.2 ≤ x ≤ 4) microwave dielectric ceramics were fabricated by using a conventional solid-state reaction method followed by laminated sintering technique. All samples showed clear and smooth grains through this sintering method. The XRD patterns indicated that Li{sub 2}Mg{sub x}TiO{sub 3+x} (2.2 ≤ x ≤ 4) ceramics displayed MgO-like cubic phase with ordered rock salt structure. The dielectric constant decreased monotonically because the molar volume expanded and molecular polarizability decreased when x values increased. The Q × f values of Li{sub 2}Mg{sub x}TiO{sub 3+x} (2.2 ≤ x ≤ 4) ceramics were dependent significantly on both average grain sizes and packing fraction. The Li{sub 2}Mg{sub 3.6}TiO{sub 6.6} ceramics sintered at 1375 °C had excellent microwave dielectric properties of ε{sub r} ∼ 12.7, Q × f ∼ 169,000 GHz, τ{sub f} ∼ −32.8 ppm/°C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Etching radical controlled gas chopped deep reactive ion etching

A method for silicon micromachining techniques based on high aspect ratio reactive ion etching with gas chopping has been developed capable of producing essentially scallop-free, smooth, sidewall surfaces. The method uses precisely controlled, alternated (or chopped) gas flow of the etching and deposition gas precursors to produce a controllable sidewall passivation capable of high anisotropy. The dynamic control of sidewall passivation is achieved by carefully controlling fluorine radical presence with moderator gasses, such as CH.sub.4 and controlling the passivation rate and stoichiometry using a CF.sub.2 source. In this manner, sidewall polymer deposition thicknesses are very well controlled, reducing sidewall ripples to very small levels. By combining inductively coupled plasmas with controlled fluorocarbon chemistry, good control of vertical structures with very low sidewall roughness may be produced. Results show silicon features with an aspect ratio of 20:1 for 10 nm features with applicability to nano-applications in the sub-50 nm regime. By comparison, previous traditional gas chopping techniques have produced rippled or scalloped sidewalls in a range of 50 to 100 nm roughness.

42 ENGINEERING↗

Smoothing Lexis diagrams using kernel functions: A contemporary approach

Lexis diagrams are rectangular arrays of event rates indexed by age and period. Analysis of Lexis diagrams is a cornerstone of cancer surveillance research. Typically, population-based descriptive studies analyze multiple Lexis diagrams defined by sex, tumor characteristics, race/ethnicity, geographic region, etc. Inevitably the amount of information per Lexis diminishes with increasing stratification. Several methods have been proposed to smooth observed Lexis diagrams up front to clarify salient patterns and improve summary estimates of averages, gradients, and trends. In this article, we develop a novel bivariate kernel-based smoother that incorporates two key innovations. First, for any given kernel, we calculate its singular values decomposition, and select an optimal truncation point—the number of leading singular vectors to retain—based on the bias-corrected Akaike information criterion. Second, we model-average over a panel of candidate kernels with diverse shapes and bandwidths. The truncated model averaging approach is fast, automatic, has excellent performance, and provides a variance-covariance matrix that takes model selection into account. We present an in-depth case study (invasive estrogen receptor-negative breast cancer incidence among non-Hispanic white women in the United States) and simulate operating characteristics for 20 representative cancers. The truncated model averaging approach consistently outperforms any fixed kernel. Our results support the routine use of the truncated model averaging approach in descriptive studies of cancer.

60 APPLIED LIFE SCIENCES↗

Non-Straub type actin from molluscan catch muscle

We have developed a method of obtaining natural actin from smooth muscles of the bivalves on the example of the Crenomytilus grayanus catch muscle. The muscles were previously rigorized to prevent a loss of thin filaments during homogenization and washings. Thin filaments were isolated with a low ionic strength solution in the presence of ATP and sodium pyrophosphate. Surface proteins of thin filaments-tropomyosin, troponin, calponin and some minor actin-binding proteins-were dissociated from actin filaments by increasing the ionic strength to 0.6 M KCL. Natural fibrillar actin obtained in that way depolymerizes easily in low ionic strength solutions commonly used for the extraction of Straub-type actin from acetone powder. Purification of natural actin was carried out by the polymerization–depolymerization cycle. The content of inactivated actin remaining in the supernatant is much less than at a similar purification of Straub-type actin. A comparative investigation was performed between the natural mussel actin and the Straub-type rabbit skeletal actin in terms of the key properties of actin: polymerization, activation of Mg-ATPase activity of myosin, and the electron-microscopic structure of actin polymers. -- Highlights: •We developed method of repolymerizable invertebrate smooth muscle actin obtaining. •Our method does not involve use of denaturating agents, which could modify proteins. •Viscosity and polymerization rate of actin, gained that way, is similar to Straub one. •Electron microscopy showed that repolymerized mussel actin is similar to Straub one. •Repolymerized mussel actin has greater ATPase activating capacity, than Straub actin.

60 APPLIED LIFE SCIENCES↗

Stability analysis of the Eulerian–Lagrangian finite volume methods for nonlinear hyperbolic equations in one space dimension

In this paper, we construct a novel Eulerian–Lagrangian finite volume (ELFV) method for nonlinear scalar hyperbolic equations in one space dimension. It is well known that the exact solutions to such problems may contain shocks though the initial conditions are smooth, and direct numerical methods may suffer from restricted time step sizes. To relieve the restriction, we propose an ELFV method, where the space-time domain was separated by the partition lines originated from the cell interfaces whose slopes are obtained following the Rakine–Hugoniot junmp condition. Unfortunately, to avoid the intersection of the partition lines, the time step sizes are still limited. To fix this gap, we detect effective troubled cells (ETCs) and carefully design the influence region of each ETC, within which the partitioned space-time regions are merged together to form a new one. Then with the new partition of the space-time domain, we theoretically prove that the proposed first-order scheme with Euler forward time discretization is total-variation-diminishing and maximum-principle-preserving with at least twice larger time step constraints than the classical first order Eulerian method for Burgers’ equation. Numerical experiments verify the optimality of the designed time step sizes.

97 MATHEMATICS AND COMPUTING↗