Search NASA⌕ Search

SEARCH · Search NASA

Results for “Source term calculation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

The dynamical evolution of the protosolar nebula

Evolutionary models for protostellar nebulae are calculated under the hypothesis that the only source for the turbulent viscosity is thermal convection. The viscous stress is approximated by an 'alpha' model, and the constant alpha is calculated in terms of the properties of turbulent thermal convection. A relatively sensitive dependence of the Rosseland mean opacity on temperature is needed for the vertical temperature gradient of the nebula to become convectively unstable. However, this requires that the vertical optical depth in the nebula is relatively sensitive to the total surface density, and as the disk is depleted of matter by protostellar accretion, the Rosseland mean optical depth drops and the disk must become convectively unstable. This limits the amount of mass that the nebula can accretionally process before the convective turbulence ceases. The resulting disk evolutionary properties are calculated and comparisons with the solar system are made.

Ruden, Steven P.↗

Water Vapor Tracers as Diagnostics of the Regional Hydrologic Cycle

Numerous studies suggest that local feedback of evaporation on precipitation, or recycling, is a significant source of water for precipitation. Quantitative results on the exact amount of recycling have been difficult to obtain in view of the inherent limitations of diagnostic recycling calculations. The current study describes a calculation of the amount of local and remote sources of water for precipitation, based on the implementation of passive constituent tracers of water vapor (termed water vapor tracers, WVT) in a general circulation model. In this case, the major limitation on the accuracy of the recycling estimates is the veracity of the numerically simulated hydrological cycle, though we note that this approach can also be implemented within the context of a data assimilation system. In this approach, each WVT is associated with an evaporative source region, and tracks the water until it precipitates from the atmosphere. By assuming that the regional water is well mixed with water from other sources, the physical processes that act on the WVT are determined in proportion to those that act on the model's prognostic water vapor. In this way, the local and remote sources of water for precipitation can be computed within the model simulation, and can be validated against the model's prognostic water vapor. Furthermore, estimates of precipitation recycling can be compared with bulk diagnostic approaches. As a demonstration of the method, the regional hydrologic cycles for North America and India are evaluated for six summers (June, July and August) of model simulation. More than 50% of the precipitation in the Midwestern United States came from continental regional tracers, and the local source was the largest of the regional tracers (14%). The Gulf of Mexico and Atlantic 2 regions contributed 18% of the water for Midwestern precipitation, but further analysis suggests that the greater region of the Tropical Atlantic Ocean may also contribute significantly. In general, most North American land regions showed a positive correlation between evaporation and recycling ratio (except the Southeast United States) and negative correlations of recycling ratio with precipitation and moisture transport (except the Southwestern United States). The Midwestern local source is positively correlated with local evaporation, but it is not correlated with water vapor transport. This is contrary to bulk diagnostic estimates of precipitation recycling. In India, the local source of precipitation is a small percentage of the precipitation owing to the dominance of the atmospheric transport of oceanic water. The southern Indian Ocean provides a key source of water for both the Indian continent and the Sahelian region.

Bosilovich, Michael G.↗

Probing Multiconfigurational States by Spectroscopy: The Cerium XAS L 3 ‐edge Puzzle

Abstract The Ce L 3 edge XAS spectra of CeO 2 and cerocene [Ce(C 8 H 8 ) 2 ] were calculated with relativistic ab‐initio multireference wavefunction approaches capable of reproducing the observed spectra accurately. The study aims to resolve the decades‐long puzzle regarding the relationship between the number and relative intensities of the XAS peaks and the 4f electron occupation in the ground state (GS) versus the core‐excited states (ESs). CeO 2 and cerocene exemplify the different roles of covalent bonding and wavefunction configurational composition in the observed intensity patterns. Good agreement is found between the calculated GS 4f‐shell occupations and the value derived from XAS measurements using peak areas ( n f ). The identity of the two‐peaked Ce L 3 edge is fully rationalized from the perspective of the relaxed wavefunctions for the GS and core ESs. The states underlying the different peaks differ from each other in a surprisingly simple way that can be associated with 4f 1 vs. 4f 0 sub‐configurations. Furthermore, part of one of the cerocene spectral peaks is associated with 4f 2 sub‐configurations. The pattern therefore reveals excited states that can be interpreted in terms of Ce IV and III oxidation numbers, as long assumed, with Ce II states additionally appearing in the cerocene spectrum. While this work demonstrates the rough accuracy of the conventional approach to determining n f from Ce L 3 ‐edge XAS, limitations are highlighted in terms of the ultimate accuracy of this approach and the potential of observing new types of excited states. The need to determine the sources of n f by calculations, is stressed.

Sergentu, Dumitru‐Claudiu↗

Neutron Electric Dipole Moments with Clover Fermions

We present preliminary results for the contributions to the neutron EDM arising from the QCD θ-term, the Weinberg three-gluon and the quark chromo-EDM operators from our ongoing lattice calculations using clover valence quarks on the MILC HISQ lattices. We use the gradient-flow technique to smooth the lattices and renormalize the gluonic operators, and use the Schwinger source method to incorporate the quark chromo-EDM interactions in the quark propagator. For the QCD θ-term and the Weinberg three-gluon operator, we report results in the gradient-flow scheme from 8 ensembles at four lattice spacings and three pion masses, including 2 physical pion mass ensembles. For the quark chromo-EDM, unrenormalized results are presented at two lattice spacings, a=0.12 and 0.09 fm, and two pion masses, M π =310 MeV and 220 MeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A test of incoherent Cerenkov radiation for VLF hiss and other magnetospheric emissions

Consideration of incoherent Cerenkov radiation from intense fluxes of electrons in the magnetosphere as a source of VLF hiss and several other emission phenomena. A procedure for calculating the Cerenkov and cyclotron radiation power from a spectrum of electrons in a test volume is outlined, as well as a ray-tracing routine for determining the path that the emitted power follows through the magnetosphere. Comparisons are made between a VLF hiss event and an energetic particle spectrum observed simultaneously with the Injun 5 spacecraft. Calculated power and fields for incoherent Cerenkov radiation are two orders of magnitude below the observed VLf hiss values, although the spectral shapes are similar. It is concluded that a partially coherent or amplified Cerenkov source or an instability is located in the altitude range from 3000 to 10,000 km. Calculations regarding Cerenkov radiation as a possible source for other wave phenomena indicate that upper hybrid resonance noise and fast hisslers may be understood in terms of incoherent Cerenkov radiation, but that V-shaped VLF hiss, saucers, ELF hiss, and Io-related Jovian decametric radiation may not.

Taylor, W. W. L.↗

40 Ca transverse response function from coupled-cluster theory

Here, we present calculations of the 40 Ca transverse response function obtained from coupled-cluster theory used in conjunction with the Lorentz integral transform method. We employ nuclear forces derived at next-to-next-to leading order in chiral effective field theory with and without Δ degrees of freedom. We first benchmark this approach on the 4 He nucleus and compare both the transverse sum rule and the response function to earlier calculations based on different methods. As expected from the power counting of the chiral expansion of electromagnetic currents and from previous studies, our results retaining only one-body term underestimate the experimental data for 4 He by about 20%. However, when the method is applied to 40 Ca at the same order of the expansion, response functions do not lack strength and agree well with the world electron scattering data. We discuss various sources of theoretical uncertainties and comment on the comparison of our results with the available experiments.

39 ≤ A ≤ 58↗

Global carbon - nitrogen - phosphorus cycle interactions: A key to solving the atmospheric CO2 balance problem?

If all biotic sinks of atmospheric CO2 reported were added a value of about 0.4 Gt C/yr would be found. For each category, a very high (non-conservative) estimate was used. This still does not provide a sufficient basis for achieving a balance between the sources and sinks of atmospheric CO2. The bulk of the discrepancy lies in a combination of errors in the major terms, the greatest being in a combination of errors in the major terms, the greatest being in the net biotic release and ocean uptake segments, but smaller errors or biases may exist in calculations of the rate of atmospheric CO2 increase and total fossil fuel use as well. The reason why biotic sinks are not capable of balancing the CO2 increase via nutrient-matching in the short-term is apparent from a comparison of the stoichiometry of the sources and sinks. The burning of fossil fuels and forest biomass releases much more CO2-carbon than is sequestered as organic carbon.

Peterson, B. J.↗

Constellation's best estimate alternate source term methodology overview

Safety analyses for a nuclear power plants need to consider postulated accidents that results in at risk of accidental release of radiation. The regulations require plant specific safety analysis reports to include an evaluation of the requirements of 10CFR50.67. Such a safety analysis report mandates limits such that calculated radiological consequences relative to certain dose locations do not exceed a total effective dose equivalent (TEDE) limits following a postulated release of radioactivity. Calculations are performed to estimate the radiological consequences, in terms of dose, to people and equipment to ensure the estimated doses are within the prescribed limits. Analysis should demonstrate, with reasonable assurance, that these prescribed limits are complied with. Conventional methodologies utilize conservative approaches to address lack of uncertainty quantification in the utilized approaches, methods, and/or inputs. These built-in excess conservatisms often result in compounding effects and hence overly conservative results in the estimated radiological consequences, which leads to inaccurate margin evaluation for operation and accident mitigation. Therefore, evaluating accurate dose consequences is needed for both operational and safety reasons. The research documented in this paper provides an overview of Constellation's Best Estimate Alternate Source Term (BEAST) Methodology. BEAST methodology relies upon the use of realistic yet bounding input distributions for key analysis parameters, which replaces use of conservative deterministic singular inputs that bound overall analysis domain. This approach enables evaluating a more accurate accident analysis response, while enabling a bounding licensing basis envelope via more accurate quantification of uncertainty in the application. Therefore, built-in margin for a given scenario is more accurately evaluated.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Steady-State and Frequency Response of a Thin-Film Heat Flux Gauge

A new and simpler design of thin-film heat flux gauge has been developed for use In high-heat-flux environments. Heat flux gauges of the same design were fabricated on three different substrates and tested. The heat flux gauge comprises a thermopile and a thermocouple junction, which measures the surface temperature. The thermopile has 40 pairs of S-type thermocouples and is covered by two thermal resistance layers. Calibration and testing of these gauges were first carried out in an arc-lamp calibration facility. Sensitivity of the gauge was discussed in terms of the relative conductivity and surface temperature. The heat flux calculated from the gauge output was In good agreement with the precalibrated standard sensor. The steady-state and the transient response characteristics of the heat flux gauge were also investigated using a carbon dioxide pulse laser as a heat source. The dynamic frequency response was evaluated in terms of the nondimensional amplitude ratio with respect to the frequency spectrum of a chopped laser bcam. The frequency response of the gauge was determined to be about 3 kHz. The temperature profiles in the thin-film heat flux gauge were obtained numerically in steady-state conditions using FLUENT and compared with the experimental results.

Fralick, Gustave C.↗

An Improved Neutron Transport Algorithm for Space Radiation

A low-energy neutron transport algorithm for use in space radiation protection is developed. The algorithm is based upon a multigroup analysis of the straight-ahead Boltzmann equation by using a mean value theorem for integrals. This analysis is accomplished by solving a realistic but simplified neutron transport test problem. The test problem is analyzed by using numerical and analytical procedures to obtain an accurate solution within specified error bounds. Results from the test problem are then used for determining mean values associated with rescattering terms that are associated with a multigroup solution of the straight-ahead Boltzmann equation. The algorithm is then coupled to the Langley HZETRN code through the evaporation source term. Evaluation of the neutron fluence generated by the solar particle event of February 23, 1956, for a water and an aluminum-water shield-target configuration is then compared with LAHET and MCNPX Monte Carlo code calculations for the same shield-target configuration. The algorithm developed showed a great improvement in results over the unmodified HZETRN solution. In addition, a two-directional solution of the evaporation source showed even further improvement of the fluence near the front of the water target where diffusion from the front surface is important.

Heinbockel, John H.↗

Decoherence of $V^{–}_{B}$ spin defects in monoisotopic hexagonal boron nitride

Spin defects in hexagonal boron nitride (hBN) are promising quantum systems for the design of flexible two-dimensional quantum sensing platforms. Here we rely on hBN crystals isotopically enriched with either 10 B or 11 B to investigate the isotope-dependent properties of a spin defect featuring a broadband photoluminescence signal in the near infrared. By analyzing the hyperfine structure of the spin defect while changing the boron isotope, we first confirm that it corresponds to the negatively charged boron-vacancy center ($V^{–}_{B}$). We then show that its spin coherence properties are slightly improved in 10B-enriched samples. This is supported by numerical simulations employing cluster correlation expansion methods, which reveal the importance of the hyperfine Fermi contact term for calculating the coherence time of point defects in hBN. Using cross-relaxation spectroscopy, we finally identify dark electron spin impurities as an additional source of decoherence. This work provides new insights into the properties of $V^{–}_{B}$ spin defects, which are valuable for the future development of hBN-based quantum sensing foils.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Finite-element solutions for geothermal systems

Vector potential and scalar potential are used to formulate the governing equations for a single-component and single-phase geothermal system. By assuming an initial temperature field, the fluid velocity can be determined which, in turn, is used to calculate the convective heat transfer. The energy equation is then solved by considering convected heat as a distributed source. Using the resulting temperature to compute new source terms, the final results are obtained by iterations of the procedure. Finite-element methods are proposed for modeling of realistic geothermal systems; the advantages of such methods are discussed. The developed methodology is then applied to a sample problem. Favorable agreement is obtained by comparisons with a previous study.

Chen, J. C.↗

Comparison of Thermal Coefficients for Two Microwave Detectors

Laboratory measurements were performed to compare the thermal coefficients of two microwave detectors that might be used for direct detection in L-band radiometers. In particular it was desired to compare the performance of a new-technology flash ADC (analog-to-digital converter) against that of an older-technology diode detector in series with a VFC (voltage-to-frequency converter). The outputs of two state-of-the-art detectors were recorded as a constant 1.414-GHz signal was input and the physical temperatures of the detectors were varied over a range of 10 C. As a further experiment, each detector was tested with a noise diode source and with a sine wave synthesizer source. Thermal coefficients were computed in terms of W/C and in terms of ppt/C at nominal operating temperatures reasonable for the individual devices. Finally, thermal coefficients were calculated in K/C to indicate the change in brightness temperature seen by a theoretical sea surface salinity radiometer employing each detector. The K/C for the flash ADC was determined to be about 2.8 times that of the diode/VFC. Different reactions of the ADC to a noise input and a sine wave input indicated that ADC tests for radiometric purposes, such as this one, should be performed using a noise input.

Mackenzie, Anne I.↗

Period variations in pulsating X-ray sources. II - Torque variations and stellar response

A statistical description of variations in the torque acting on a rotating neutron star is developed in terms of stationary random processes and is used to calculate the torque power spectrum, stellar response power spectrum, and the total mean square variation in the crustal angular velocity of the star. The response of a star with a finite frequency internal mode is calculated with the aid of phenomenological equations which correspond to a generalized two-component model of the star. The form of the stellar response functions is examined in a number of limiting cases of physical interest, and the dependence of the response power on both the period of observation and the time over which fluctuating torques have been acting is discussed.

Lamb, F. K.↗

Two-way coupled particle-turbulence interaction: Effect of numerics and resolution on fluid and particle statistics

Euler-Lagrange point-particle simulation has emerged as a premier methodology for studying dispersed particle-laden flows. This method's popularity stems from its ability to resolve fine-scale fluid structures while also tracking individual particles at reduced cost using an appropriate particle acceleration model. However, the point-particle model has known convergence issues in that refinement of the fluid grid can lead to changes in the predicted statistics. The reasons for non-convergence are twofold: the point-particle two-way coupling force in the Navier-Stokes equations requires a numerical regularization and, without careful implementation, yields a singular force on the fluid with grid refinement. The second factor that yields grid-dependent statistics is that the point-particle force model in general depends on the undisturbed fluid velocity. When the undisturbed fluid velocity is not robustly modeled in a grid-insensitive way, the calculated force for both particles and fluid will be grid-dependent, contaminating their respective statistics. While the first issue regarding regularizing the point-particle source term has received attention in the literature, the consequences of robustly modeling the undisturbed velocity in the context of grid refinement of turbulence has received little attention. Here, we consider decaying homogeneous isotropic turbulence laden with particles at different Stokes numbers. For a given Stokes number, we systematically refine the grid and demonstrate that explicitly modeling the undisturbed fluid velocity yields relative grid insensitivity for the energy of the particle and fluid phases, as well as acceleration of the particles. We also demonstrate that an appropriately defined dissipation rate is also grid-insensitive when an undisturbed fluid velocity correction is used. In contrast, when the undisturbed fluid velocity is modeled using the conventional approach of interpolating the local fluid velocity to the particle location, we show this procedure yields divergent statistics with grid refinement. In particular, we show that higher-order interpolation of the fluid velocity in two-way coupled problems is worse than lower-order interpolation, in the absence of a correction procedure to estimate the undisturbed fluid velocity. We also examine velocity derivative statistics of the fluid phase and demonstrate that these statistics are not in general convergent even when the undisturbed fluid velocity is explicitly modeled. Collectively, the observations in this paper are used to present a philosophy on the types of questions which are answerable with point-particle methods.

42 ENGINEERING↗

Reconciling the MOLA, TES, and Neutron Observations of the North Polar CO2 Mass Budget on Mars

There are now three independent observations of the CO2 polar cap mass budget of Mars' north polar cap. The first is based elevation changes detected by the Mars Orbiter Laser Altimeter (MOLA) on the Mars Global Surveyor (MGS). The second is based on MGS Thermal Emission Spectrometer (TES) broadband observations of the solar and infrared radiation fields at the top of the atmosphere. The third is based on neutron counts measured by the neutron spectrometer (NS) on Odyssey. The TES data are based on an energy balance. The net radiative loss (gain) in a column is balanced by latent heating due condensation (sublimation) of CO2. In calculating the mass budget, the other main energy sources, atmospheric heat transport and subsurface conduction, were neglected. At the pole, atmospheric heat transport is indeed a small term. However, subsurface heat conduction can be significant because at the North Pole water ice, which has a high thermal conductivity compared to bare soil, is a dominant component of the subsurface. Thus, heat conducted down into the ice during summer will slowly bleed back out during fall and winter reducing the amount of CO2 that condenses on the pole. We have taken a first cut at quantifying this effect by fitting a curve to Paige's estimates of the conducted energy flux in his analysis of Viking IRTM data.

Haberle, R. M.↗

Spatiotemporal Characteristics and Propagation of Summer Extreme Precipitation Events over United States: A Complex Network Analysis

Complex Network (CN) is a graph-theory based depiction of relation shared by various elements of a complex-dynamical system such as the atmosphere. Here we applied the concept of CN to understand the directionality and topological structure of summer extreme precipitation events (SEPEs) over the conterminous United States (CONUS). The SEPEs are calculated based on the 95th percentile daily rainfall at 0.5ox0.5o spatial resolution for CONUS to investigate the multi-dimensional characteristics of precipitation extremes. The derived CN coefficients (e.g., betweenness centrality, clustering coefficient, orientation, and network divergence) reveal important structural and dynamical information about the topology of the SEPEs and improve understanding of the dominant meteorological patterns. The initiation and propagation of SEPEs from the source-zones to the sink-zones are identified. The SEPEs are influenced by topography, dominant wind patterns, and moisture sources in terms of their topological structure and spatial dynamics.

Mondal, Somnath↗

Exact and locally implicit source term solvers for multifluid-Maxwell systems

Recently, a family of models that couple multifluid systems to the full Maxwell equations have been used in laboratory, space, and astrophysical plasma modeling. These models are more complete descriptions of the plasma than reduced models like magnetohydrodynamic (MHD) since they are derived more closely from the full kinetic Vlasov-Maxwell system, without assumptions like quasi-neutrality, negligible electron mass, etc. Thus these models naturally retain non-ideal MHD effects like electron inertia, Hall term, pressure anisotropy/nongyrotropy, displacement current, among others. One obstacle to broader application of these model is that an explicit treatment of their source terms leads to the need to resolve rapid processes like plasma oscillation and electron cyclotron motion, even when these are not important. In this paper, we suggest two ways to address this issue. First, we derive the analytic solutions to the source update equations, which can be implemented as a practical, but less generic solver. We then develop a time-centered, locally implicit algorithm to update the source terms, allowing stepping over the fast kinetic time-scales. For a plasma with S species, the locally implicit algorithm involves inverting a local (3 S + 3) × (3 S + 3) matrix only, thus is very efficient. The performance can be further increased by using the direct update formulas to skip null calculations. In this paper, we present benchmarks illustrating the exact energy-conservation of the locally implicit solver, as well as its efficiency and robustness for both small-scale, idealized problems and largescale, complex systems. The locally implicit algorithm can be also easily extended to include other local sources, like collisions and ionization, which are difficult to solve analytically.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗