Search NASA⌕ Search

SEARCH · Search NASA

Results for “Substitutional Doping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

High Efficiency InP Solar Cells from Low Toxicity Tertiarybutylphosphine

Large scale manufacture of phosphide based semiconductor devices by organo-metallic vapor phase epitaxy (OMVPE) typically requires the use of highly toxic phosphine. Advancements in phosphine substitutes have identified tertiarybutylphosphine (TBP) as an excellent precursor for OMVPE of InP. High quality undoped and doped InP films were grown using TBP and trimethylindium. Impurity doped InP films were achieved utilizing diethylzinc and silane for p and n type respectively. 16 percent efficient solar cells under air mass zero, one sun intensity were demonstrated with Voc of 871 mV and fill factor of 82.6 percent. It was shown that TBP could replace phosphine, without adversely affecting device quality, in OMVPE deposition of InP thus significantly reducing toxic gas exposure risk.

Hoffman, Richard W., Jr.↗
DOE OSTI2023

Extrinsic n-type doping of Cd 3 As 2 thin films

Cd 3 As 2 provides an excellent platform for studying the physics of three-dimensional Dirac semimetals due to its stability as well as its compatibility with thin film growth. Crystals made using both bulk and thin film synthesis are unintentionally doped n-type, and other than introducing Zn to reduce the carrier concentration, no efforts have been reported to alter this intrinsic doping without major changes to the band structure. Here, group VI elements Te and Se are introduced during epitaxy to increase the electron concentration of the films. Starting from an unintentionally doped electron concentration of 1–2 × 10 17 cm -3 , concentrations of up to 3 × 10 18 cm -3 are achieved. Analysis of Shubnikov–de Haas oscillations reveals good agreement in calculated effective mass and Fermi velocity of highly doped films with unintentionally doped single crystals with similar electron concentrations. The density functional theory is also performed to study the effects of group VI substitutions and confirms no strong perturbations in the electronic structure. This work ultimately demonstrates tunability in the carrier concentration using extrinsic dopants without substantial changes in the band structure, allowing for intentional design of Fermi-level position for device applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Impurity-induced moment freezing in NaFe x⁢ Ru 1–x O 2

We report the impact of magnetic impurity substitution on the quantum disordered magnetic ground state of NaRuO 2 . Local S = 5/2 moments are introduced into the frustrated triangular lattice of J eff = 1/2 Ru moments via Fe substitution in NaFe x⁢ Ru 1–x O 2 , and the evolution of the magnetic ground state is reported. Local spin freezing associated with conventional spin-glass behavior is observed upon Fe substitution, marking an impurity-induced freezing of the primarily dynamic magnetic ground state in NaRuO 2 . Furthermore, local Fe moments induce a Curie-Weiss magnetic behavior in the uniform magnetic susceptibility, and the local moment magnitude is best described by dynamic Ru moments polarized about impurity sites. Furthermore, our results establish an impurity-doping phenomenology consistent with inherently dynamic moments in NaRuO 2 that are pinned by local magnetic impurities, similar to “swiss cheese” models of impurity-substituted copper oxides.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Shifting Defect Self-Regulation via Disordered Vacancies in Hollow Tin Perovskites

Tin(II)-based hybrid halide perovskites typically suffer from severe self-doping behavior as a result of facile oxidation of Sn(II) to Sn(IV), leading to high carrier densities (holes) and metallic-like conductivities that limit their applications. In this contribution, we describe how substituting the large ethylenediammonium cation for methylammonium in the intentionally defective “hollow” perovskite family, MA 1−x en x Sn 1−0.7x I 3−0.4x (MA = methylammonium, en = ethylenediammonium), where 0 ≤ x ≤ 0.38, effectively minimizes the intrinsic self-doping behavior. The use of a solvent-free, mechanochemical synthesis route further circumvents oxidative side reactions typical in solution processing, enabling more precise control and understanding of both composition and defect chemistry. Dark and time-resolved microwave conductivity measurements of these materials as a function of “x” reveal two regimes of conductivity suppression: at low x incorporation (x ≤ 0.15), the carrier density decreases by an order of magnitude via defect-mediated charge compensation, while higher substitution (0.15 < x ≤ 0.38) greatly reduces the carrier mobility. At these lower substitution levels, the observations suggest that intrinsic equilibrium tin vacancies are compensated instead by ionic defects in lieu of mobile holes. For the higher substitution levels, the less mobile carriers exhibit long recombination lifetimes, consistent with polaron-mediated transport. These findings establish a strategy for relatively low iodine chemical potential synthesis and defect-driven control of the carrier concentration in tin halide perovskites, advancing the rational discovery of dopable hybrid semiconductors.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Nanostructured ligament and fiber Al–doped Li 7 La 3 Zr 2 O 12 scaffolds to mediate cathode-electrolyte interface chemistry

In this study, scaffold structures of electrospun aluminum–substituted lithium lanthanum zirconate Li 7 La 3 Zr 2 O 12 (Al-LLZO) were synthesized and used as an additive in a LiNi 0.6 Mn 0.2 Co 0.2 O 2 composite cathode. The scaffolds were crystalized in the cubic phase after calcination at 700 °C. The Al-LLZO scaffold morphology was dependent on the precursor formulation (aqueous and dimethylformamide. The aqueous precursors resulted in scaffolds of densely coalesced ligaments, whereas the dimethylformamide precursors resulted in high–aspect ratio nanofiber scaffolds. The long-term cycling stability and rate performance of the cells were found to depend on the Al-LLZO scaffold morphology. The uniformly dispersed Al-LLZO fibers resulted in a more stable cathode electrolyte interface formation through the reduced decomposition of the LiPF 6 salt during cycling, resulting in a better high-rate and long-term cycling performance.

25 ENERGY STORAGE↗
DOE OSTI2021

Improving the Comprehensive Performance of Na 0.7 MnO 2 for Sodium Ion Batteries by ZrO 2 Atomic Layer Deposition

Sodium ion batteries with Na-Mn-O compounds as cathode have been widely studied as substitutes for lithium ion batteries due to their abundant resources. Still, the relatively poor cycling stability and low capacity of Na-Mn-O compounds significantly limit their applications. Different approaches, including element substitution and surface modification, have been applied to improve the electrochemical performance of those cathode materials. Herein, element doping and coating of ZrO 2 on Na 0.7 MnO 2 particles have been achieved by atomic layer deposition (ALD) followed by post-annealing. The rate capability and cycling stability of the modified material were significantly improved, and the mechanism of performance enhancement was revealed. The ZrO 2 coatings acted as a stable interfacial layer to enhance the cycling stability of Na 0.7 MnO 2 by suppressing side reactions between the electrode and electrolyte. The doping of transition metal ions reduced energy barriers for sodium ion insertion and deintercalation during cycling, further improving the charge and discharge capacity and rate performance of Na 0.7 MnO 2 .

25 ENERGY STORAGE↗
NASA NTRS1994

Rare earth garnet selective emitter

Thin film Ho-YAG and Er-YAG emitters with a platinum substrate exhibit high spectral emittance in the emission band (epsilon(sub lambda) approximately equal to 0.74, ((4)l(sub 15/2)) - ( (4)l(sub13/2)), for Er-YAG and epsilon(sub lambda) approximately equal to 0.65, ((5)l(sub 7))-((5)l(sub 8)) for Ho-YAG) at excellent candidates for high efficiency selective emitters in the thermophotovoltaics (TPV) systems operating at moderate temperatures (1200-1500K). Spectral emittance measurements of the thin films were made (1.2 less than lambda less than 3.0 microns) and compared to the theoretical emittances calculated using measured values of the spectral extinction coefficient. In this paper we present the results for a new class of rare earth ion selective emitters. These emitters are thin sections (less than 1 mm) of yttrium aluminum garnet (YAG) single crystal with a rare earth substitutional impurity. This paper presents normal spectral emittance, epsilon(sub lambda), measurements of holmium (Ho), and erbium (Er) doped YAG thin film selective emitters at 1500 K, and compares those results with the theoretical spectral emittance.

Lowe, Roland A.↗
NASA NTRS2006

Experimental Partitioning of Cr(3+) and Sc(3+) into Olivine: Mechanisms and Implications

Olivine (Mg, Fe)Si2O4 does not, by stoichiometry, accept cations such as Sc(3+) or Cr(3+). However, the partition coefficients of Sc and Cr between olivine and liquid are significant 0.2-1.0. We have measured Cr(3+) partition coefficients of near unity and have grown olivines with nearly 3 wt.% Sc2O3. Therefore, there must be a simple means of charge balancing 3+ ions in a crystal structure that was obviously not designed to receive other than 2+ ions on the olivine M sites. The simplest explanation is that two 3+ ions enter the olivine structure by displacing three 2+ ions and creating an M site vacancy. Even this explanation has difficulties. For minor elements in our experiments (~1 wt.%) the odds of a minor element 3+ ion finding a second 3+ for charge balance are of the order of 100:1 against. Because of the reducing conditions of our experiments, Fe(3+) will not suffice; and Al(3+) is not in sufficient quantity in olivine for charge balance. Therefore, Cr or Sc must, in effect, charge balance itself. For true trace elements, the problem is compounded many times. For an ion at the 10 ppm level the chances of finding a second (for example) Sc ion is approx.10(exp 5):1 against. Of course, any other 3+ ion would suffice but comparisons between percent level doping experiments and trace level partitioning indicate that Henry s law is obeyed. This implies that the same substitution mechanism occurs at both the percent and tens of ppm levels. There are two simple solutions to this problem: (i) The electrical conductivity of olivine is such that charge balance need not be local. This requires substantial domains within the olivine crystal in electrical contact by migration of vacancies or electronic defects. (ii) The 3+ cation brings along its own charge-balancing ion because it existed as a dimer in the silicate liquid. Olivine is not a true insulator but is actually a p-type semiconductor. Even so, electrical communication by this means is unlikely over the tens or hundreds of unit cells that would be required for charge balance to be local. Therefore, we cautiously favor the idea that melt speciation is the means by which 3+ ions enter the olivine structure. Possibly this model might be tested by in situ XAFS measurements or by molecular dynamical calculations.

Jones, John↗
DOE OSTI2025

Local rare-earth dopant structure in a complex-oxide/semiconductor heterojunction: Molecular beam epitaxy grown Yb-doped SrTiO3 on Si(001)

We have investigated the structural and electronic properties of Yb-doped SrTiO3/Si(001) grown by molecular beam epitaxy. Other rare-earth donor dopants that result in n-type conductivity typically substitute for Sr at the A-sites in the perovskite lattice. In contrast, Yb has been found to substitute predominantly for Ti at the perovskite B-sites based on data from atomically resolved scanning transmission electron microscopy and spectroscopy, as well as extended x-ray absorption fine structure. Yb exhibits two distinct charge states as determined by x-ray absorption spectroscopy and associated modeling, +2.7 and +2.1. These aliovalent substitutional dopants are compensated by donor electrons from oxygen vacancies that form during epitaxial film growth. An atom beam flux mismatch was present during film depositions because it was assumed that Yb would occupy A-sites, leading to a flux matching formula given by Yb + Sr = Ti. However, the formation of YbTi rather than YbSr results in Sr vacancies and extraneous (i.e. non-lattice) Ti atoms in the films, or on the film surfaces. The presence of these defects, together with oxygen vacancies, leads to deep-level electron traps that were detected by resonant photoemission and much higher sheet resistance than that associated with, for instance, La-doped films.

Chambers, Scott A. (ORCID:000000025415043X)↗
DOE OSTI2022

Pervasive beyond Room-Temperature Ferromagnetism in a Doped van der Waals Magnet

The existence of long-range magnetic order in low-dimensional magnetic systems, such as the quasi-two-dimensional van der Waals (vdW) magnets, has attracted intensive studies of new physical phenomena. The vdW Fe N GeTe 2 (N = 3, 4, 5; FGT) family is exceptional, owing to its vast tunability of magnetic properties. In particular, a ferromagnetic ordering temperature (T C ) above room temperature at N = 5 (F5GT) is observed. Here, our work shows that, by nickel (Ni) substitution of iron in F5GT, a record high T C =478(6) K is achieved. Importantly, pervasive, beyond room-temperature ferromagnetism exists in almost the entire doping range of the phase diagram of Ni-F5GT. We argue that this striking observation in Ni-F5GT can be possibly due to several contributing factors, including increased 3D magnetic couplings due to the structural alterations.

2-dimensional systems↗
DOE OSTI2026

Coexisting paramagnetic spins and long-range magnetic order in Ba4⁢(Ru0.92⁢Ir0.08)3⁢O10

We investigate the effect of dilute Ir substitution on the magnetism of the trimer-based ruthenate Ba4⁢Ru3⁢O10 using neutron diffraction, magnetic susceptibility measurements, first-principles calculations, and atomistic simulations. Neutron diffraction shows that Ir doping preserves the zigzag antiferromagnetic structure and the ordered-moment magnitude of the parent compound, in which the moments reside exclusively on the two outer Ru(2) sites of each Ru3⁢O12 trimer, while the central Ru(1) site remains nonmagnetic. The Néel temperature is reduced from ∼105 to 84.0(1) K upon 8% Ir substitution, while magnetic susceptibility reveals a pronounced low-temperature Curie-like upturn, indicating the coexistence of paramagnetic spins with long-range antiferromagnetic order. Density-functional calculations show that Ir preferentially occupies the central Ru(1) site, which disrupts the exchange pathways of the affected Ru3⁢O12 trimer state. Atomistic simulations incorporating this paramagnetic dilution reproduce the suppressed ordering temperature and the coexistence of ordered and paramagnetic components.

Islam, Farhan [Ames Laboratory]↗
DOE OSTI2020

p-type conductivity and damage recovery in implanted GaN annealed by rapid gyrotron microwave annealing

We demonstrate p-type activation of GaN doped by Mg ion implantation, and in situ during metalorganic chemical vapor deposition through sequential short-duration gyrotron microwave heating cycles at temperatures of 1200–1350 °C. GaN is implanted with 1019 cm−3 Mg ions, capped with AlN, and annealed under 3 MPa N2 overpressure in 5 s heating cycles for less than 60 s total using a high-power gyrotron microwave heating source. Through I–V characterization, photoluminescence spectroscopy, and Raman spectroscopy, we study the evolution of electrical properties, optically active point defects, and material strain in response to implantation and annealing. For Mg-implanted samples, increasing annealing temperature is characterized by an increase in the PL substitutional Mg-related peak (UVL) relative to the shallow-donor vacancy-related peak (GL2). Through comparison of implanted and in situ doped samples, it is demonstrated that the origin of compensating VN lies primarily in implantation rather than degradation from the annealing process. Transmission line measurements and diode I–V measurements show a sheet resistance of 1083 kΩ/□ and a hole concentration of 1.23 × 1015 cm−3, respectively, in the Mg-implanted material annealed at 1350 °C. We conclude that temperature-cycled gyrotron annealing at 1350 °C decreases implant-induced compensating point defects and activates Mg to obtain selective p-type conduction.

Meyers, V. (ORCID:0000000176731553)↗
DOE OSTI2023

Probing many-body dynamics in a two-dimensional dipolar spin ensemble

Abstract The most direct approach for characterizing the quantum dynamics of a strongly interacting system is to measure the time evolution of its full many-body state. Despite the conceptual simplicity of this approach, it quickly becomes intractable as the system size grows. An alternate approach is to think of the many-body dynamics as generating noise, which can be measured by the decoherence of a probe qubit. Here we investigate what the decoherence dynamics of such a probe tells us about the many-body system. In particular, we utilize optically addressable probe spins to experimentally characterize both static and dynamical properties of strongly interacting magnetic dipoles. Our experimental platform consists of two types of spin defects in nitrogen delta-doped diamond: nitrogen-vacancy colour centres, which we use as probe spins, and a many-body ensemble of substitutional nitrogen impurities. We demonstrate that the many-body system’s dimensionality, dynamics and disorder are naturally encoded in the probe spins’ decoherence profile. Furthermore, we obtain direct control over the spectral properties of the many-body system, with potential applications in quantum sensing and simulation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Field-induced spin polarization in the lightly Cr-substituted layered antiferromagnet NiP S 3

Tuning magnetic properties in layered magnets is an important route to realize novel phenomenon related to two-dimensional (2D) magnetism. Recently, tuning antiferromagnetic (AFM) properties through substitution and intercalation techniques has been widely studied in MPX 3 compounds. Interesting phenomena, such as diverse AFM structures and even the signatures of ferrimagnetism, have been reported. However, long-range ferromagnetic (FM) ordering has remained elusive. Here, in this work, we explored the magnetic properties of the Cr-substituted NiP S 3 . We found that Cr substitution is extremely efficient in controlling spin orientation in NiP S 3 . Our study reveals a field-induced spin polarization in lightly (9%) Cr-substituted NiP S 3 , which is likely attributed to the attenuation of AFM interactions and magnetic anisotropy due to Cr doping. Our work provides a possible strategy to achieve FM phase in AFM MPX 3 , which could be useful for investigating 2D magnetism as well as potential device applications.

2-dimensional systems↗
NASA NTRS2008

Aromatic Diimides - Potential Dyes for Use in Smart Films and Fibers

New aromatic diimide fluorescent dyes have been prepared with potential for use as chemical sensors and in chromogenic polymers. These dyes have been designed to utilize excited state electron transfer reactions as the means for sensing chemical species. For example, an aniline en-dcapped anthryl diimides functions effectively as an "on-off" sensor for pH and the detection of phosphoryl halide based chemical warfare agents, such as Sarin. In the absence of analytes, fluorescence from this dye is completely quenched by excited state electron transfer from the terminal amines. Reaction of these amines inhibits electron transfer and activates the fluorescence of the dye. Another substituted anthryl diimide is presented with the capability to detect pH and nitroaromatic compounds, such as TNT. Films prepared by doping small amounts (less than 0.1 weight percent) of several of these dyes in polymers such as linear low density polyethylene exhibit thermochromism. At room temperature, these films fluoresce reddish-orange. Upon heating, the fluorescence turns green. This process is reversible cooling the films to room temperature restores the orange emission.

Meador, Michael A.↗
DOE OSTI2025

Cr is not an acceptor in 𝛽⁢−G⁢a 2 ⁢O 3

The intensity of red C⁢r 3+ photoluminescence (PL) in monoclinic gallium oxide (𝛽⁢−G⁢a 2 ⁢O 3 ) is suppressed by 𝑛-type conductivity, an effect that has been attributed to a Cr deep acceptor level in the bandgap. In 𝑛-type material, such an acceptor level would be occupied, resulting in the C⁢r 2+ oxidation state and the absence of C⁢r 3+ PL. To test this model, 𝑛-type 𝛽⁢−G⁢a 2 ⁢O 3 crystals co-doped with Cr and Zr (a donor) were grown from the melt. The samples show C⁢r 3+ optical absorption bands and a high free-electron concentration of 4 × 10 18 c⁢m −3 . If Cr were an acceptor, then it would be fully compensated and therefore would not exhibit the C⁢r 3+ optical signature. Hybrid functional calculations indicate that Cr occupies the substitutional octahedral Ga(II) site and that the C⁢r 2+ state is energetically unfavorable, i.e., Cr is not an acceptor. Weak C⁢r 3+ PL was observed in the Cr/Zr co-doped samples. In conclusion, the quenching of PL may be caused by a transfer of energy to free electrons, a nonradiative process that would reduce the emission intensity.

carrier generation & recombination↗