SEARCH · Search NASA

Results for “Surface intermediates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

All sources NASA NTRS DOE OSTI

NASA NTRS1979

A consistent design procedure for supercritical airfoils in free air and a wind tunnel

A computational inverse procedure for transonic airfoils in which shapes are determined supporting prescribed pressure distributions is presented. The method uses the small disturbance equation and a consistent analysis-design differencing procedure at the airfoil surface. This avoids the intermediate analysis-design-analysis iterations. The effect of any openness at the trailing edge is taken onto account by adding an effective source term in the far field. The final results from a systematic expansion procedure which models the far field for solid, ideal slotted, and free jet tunnel walls are presented along with some design results for the associated boundary conditions and those for a free flight.

Shankar, V.↗

NASA NTRS1980

An entry and landing probe for Titan

Results of a recent study of entry and landing probes for the exploration of Titan are presented. The probes considered were based on a wide range of exploration mission possibilities. They included: an atmospheric science probe; an intermediate, atmospheric and limited surface science probe; and a larger atmospheric and expanded surface science probe. Because of lower gravity on Titan and its atmosphere characteristics, the entry environment is less severe than that of Mars. However, the large uncertainties in the current definition of the atmosphere and uncertainties in Titan's surface characteristics have required trade-offs of various combinations of entry and descent shapes and hard lander configurations. Results show that all probe classes are feasible without major developments.

Murphy, J. P.↗

NASA NTRS1985

Solid-state Bonding of Superplastic Aluminum Alloy 7475 Sheet

Experimental works were carried out to study the feasibility of solid state bonding of superplastic aluminum 7475 sheet. Amount of deformation, bonding time, surface cleaning method and intermediate layer were the process parameters investigated. Other parameters, held constant by the superplastic forming condition which is required to obtain a concurrent solid state bonding, are bonding temperature, bonding pressure and atmosphere. Bond integrity was evaluated through metallographic examination, X-ray line scan analysis, SEM fractographic analysis and lap shear tests. The early results of the development program indicated that sound solid state bonding was accomplished for this high strength 7475 alloy with significant amounts of deformation. A thin intermediate layer of the soft 5052 aluminum alloy aided in achieving a solid state bonding by reducing the required amount of plastic deformation at the interface. Bond strength was substantially increased by a post bond heat treatment.

Byun, T. D. S.↗

NASA NTRS1985

Physics and chemistry of sulfur lakes on Io

Based on data from Loki and other hot spot regions, a model for a convecting sulfur lake that is heated from below is constructed. Temperature profiles and fluxes in the silicate and sulfur regions are consistent with the observed Loki highest-temperature component and excess flux. Evaporatin of sulfur sets a strong upper limit on the lake surface temperature, and the intermediate temperature in the Loki region is identified with sulfur vapor condensing primarily along lake shores. Simple models of sulfur vapor transport can be used to match the Voyager IRIS data, assuming sulfur vapor condensed on the shore radiates like a blackbody. The 1 - 100 year lifetime of such a lake in steady state implies that long-term earth-based observations interpreted with this model could detect variations in the Loki thermal output. The sodium-sulfur phase diagram is also presented and used to show that evaporated lakes may leave behind sodium-rich residue which could supply the torus with sodium. Finally, uncertainties in the model are assessed, including the lack of sulfur emission features in the Loki spectrum.

Lunine, J. I.↗

NASA NTRS1991

Pretreatment of lubricated surfaces with sputtered cadmium oxide

Cadmium oxide is used with a dry solid lubricant on a surface to improve wear resistance. The surface topography is first altered by photochemical etching to a predetermined pattern. The cadmium oxide is then sputtered onto the altered surface to form an intermediate layer to more tightly hold the dry lubricant, such as graphite.

Fusaro, Robert L.↗

NASA NTRS1992

Coronal shock waves

The formation of magnetohydrodynamic (MHD) shocks near the leading edge of Coronal Mass Ejections (CME's) is considered using results from both shock theory and numerical simulations. By using just the shock theory results and a simplified model corona, the following is shown: a slow shock front should be concave upward (away from the solar surface); a configuration containing intermediate shocks should also be concave upward near the center of the CME and concave downward at some distance from the CME centerline; and a fast shock configuration should be concave downward. These results are verified with numerical simulations of the MHD equations for the propagation of shocks through a quiescent coronal streamer. By examining the characteristic wave speeds in the ambient streamer, it is estimated that the various shock configurations should form for CME speeds within the following speed increments: slow shocks, 200 to 300 km/sec; intermediate shocks, 300 to 900 km/sec; and fast shocks, greater than 900 km/sec.

Steinolfson, Richard S.↗

NASA NTRS1994

Dynamics of emerging active region flux loops

The buoyant rise of a magnetic flux loop arising from a single perturbed segment of a toroidal flux ring lying slightly beneath the base of the convection zone is studied by way of numerical simulations. We have considered flux loop evolution assuming both solid-body rotation, and differential rotation consistent with recent results from helioseismology. Our major results are presented, and we offer some speculations on the decay of active regions, based on the results of our studies. We speculate that as plasma in the tube attempts to establish hydrostatic equilibrium along the field lines after the flux emergence has taken place, the tube field strength at some intermediate depths below the surface becomes sufficiently small at the surface portions of the tube (which have cooled and undergone convective collapse) become dynamically disconnected from those portions near the base of the convection zone. The surface proportions of the emerged flux tubes are then transported by motions near the photosphere, such as supergranular convection and meridional flow.

Fan, Y.↗

NASA NTRS1981

Entry and Landing Probe for Titan

Results of a recent study of entry and landing probes for the exploration of Titan are presented. The probes considered were based on a wide range of exploration mission possibilities. They included: an atmospheric science probe, an intermediate atmospheric and limited surface science probe, and a larger atmospheric and expanded surface science probe. Because of lower gravity on Titan and its atmospheric characteristics, the entry environment is less severe than that of Mars. However, the large uncertainties in the current definition of the atmosphere and the uncertainties in Titan's surface characteristics have required tradeoffs of various combinations of entry and descent shapes and hard lander configurations. Results show that all probe classes are feasible without major developments.

Murphy, J. P.↗

NASA NTRS2011

Aquarius Salinity Retrieval Algorithm: Final Pre-Launch Version

This document provides the theoretical basis for the Aquarius salinity retrieval algorithm. The inputs to the algorithm are the Aquarius antenna temperature (T(sub A)) measurements along with a number of NCEP operational products and pre-computed tables of space radiation coming from the galaxy and sun. The output is sea-surface salinity and many intermediate variables required for the salinity calculation. This revision of the Algorithm Theoretical Basis Document (ATBD) is intended to be the final pre-launch version.

Wentz, Frank J.↗

NASA NTRS2003

GPS Position and Heading Circuitry for Ships

Circuit boards that contain radio-frequency (RF) and digital circuitry have been developed by NASA to satisfy a requirement of the Port of Houston Authority for relatively inexpensive Global Positioning System (GPS) receivers that indicate the azimuthal headings as well as the positions of ships. The receiver design utilizes the unique architecture of the Mitel commercial chip-set, which provides for an accurate GPS-based heading-determination device. The major components include two RF front ends (each connected to a separate antenna), a surface-acoustic-wave intermediate-frequency filter between second- and third-stage mixers, a correlator, and a reduced-instruction- set computer. One of the RF front ends operates as a master, the other as a slave. Both RF front ends share a 10-MHz sinusoidal clock oscillator, which provides for more accurate carrier phase measurements between the two antennas. The outputs of the RF front ends are subjected to conventional GPS processing. The commercial-based chip-set design approach provides an inexpensive open architecture GPS platform, which can be used in developing and implementing unique GPS-heading and attitude-determination algorithms for specific applications. The heading is estimated from the GPS position solutions of the two antennas by an algorithm developed specifically for this application. If a third (and preferably a fourth) antenna were added, it would be possible to estimate the attitude of the GPS receiver in three dimensions instead of only its heading in a horizontal plane.

Cooke, Michael P.↗

NASA NTRS2017

Would Current International Space Station (ISS) Recycling Life Support Systems Save Mass on a Mars Transit?

The oxygen and water are recycled on the International Space Station (ISS) to save the cost of launching their mass into orbit. Usually recycling systems are justified by showing that their launch mass would be much lower than the mass of the oxygen or water they produce. Short missions such as Apollo or space shuttle directly provide stored oxygen and water, since the needed total mass of oxygen and water is much less than that of there cycling equipment. Ten year or longer missions such as the ISS or a future moon base easily save mass by recycling while short missions of days or weeks do not. Mars transit and long Mars surface missions have an intermediate duration, typically one to one and a half years. Some of the current ISS recycling systems would save mass if used on a Mars transit but others would not.

mass↗

NASA NTRS2024

Multispacecraft Observations of a Widespread Solar Energetic Particle Event on 2022 February 15–16

On 2022 February 15–16, multiple spacecraft measured one of the most intense solar energetic particle (SEP) events observed so far in Solar Cycle 25. This study provides an overview of interesting observations made by multiple spacecraft during this event. Parker Solar Probe (PSP) and BepiColombo were close to each other at 0.34–0.37 au (a radial separation of ∼0.03 au) as they were impacted by the flank of the associated coronal mass ejection (CME). At about 100° in the retrograde direction and 1.5 au away from the Sun, the radiation detector on board the Curiosity surface rover observed the largest ground-level enhancement on Mars since surface measurements began. At intermediate distances (0.7–1.0 au), the presence of stream interaction regions (SIRs) during the SEP arrival time provides additional complexities regarding the analysis of the distinct contributions of CME-driven versus SIR-driven events in observations by spacecraft such as Solar Orbiter and STEREO-A, and by near-Earth spacecraft like ACE, SOHO, and WIND. The proximity of PSP and BepiColombo also enables us to directly compare their measurements and perform cross-calibration for the energetic particle instruments on board the two spacecraft. Our analysis indicates that energetic proton measurements from BepiColombo and PSP are in reasonable agreement with each other to within a factor of ∼1.35. Finally, this study introduces the various ongoing efforts that will collectively improve our understanding of this impactful, widespread SEP event.

Solar energetic particles↗

DOE OSTI2020

Surface-Activated Corrosion in Tin–Lead Halide Perovskite Solar Cells

Mixed tin–lead halide perovskite solar cells have promising power conversion efficiencies, but long-term stability is still a challenge. Here, we examine the stability of a 60:40 tin–lead perovskite to better understand diminished device performance upon thermal treatment, both in ambient and inert atmosphere. Operando X-ray diffraction shows a stable bulk structure of the perovskite absorber, leading to the hypothesis that surface chemistry dominates the degradation mechanism. X-ray photoelectron spectroscopy reveals two new observations post-thermal annealing that accompany previously reported Sn 4+ evolution: (i) the formation of I 3 – intermediates preceding I 2 loss at the surface and (ii) evidence of under-coordinated tin and lead surface sites (Sn δ<2+ and Pb δ<2+ , respectively) in inert and ambient conditions. These two species indicate an activated corrosion (i.e., both oxidation and reduction) process at the surface as a possible chemical pathway for degradation, which is expected to be accelerated under operando voltage and light biases.

14 SOLAR ENERGY↗

DOE OSTI2026

Interplay of Quantum Size Effect and Tensile Strain on Surface Morphology of β-Sn(100) Islands

The quantum size effect (QSE) and strain effect are two key factors influencing the surface morphology of thin films, which can increase film surface roughness through QSE-induced thickness oscillation and strain-induced island formation, respectively. Surface roughness usually manifests in the early stages of film growth and diminishes beyond a critical thickness. In this work, we employ molecular beam epitaxy (MBE) to grow β-Sn(100) islands with varying thickness N on bilayer graphene-terminated 6H-SiC(0001) substrates. Scanning tunneling microscopy and spectroscopy measurements reveal an inverse surface roughness effect that highlights the interplay of QSE and misfit strain in shaping the surface morphology of β-Sn(100) islands. For N ≤ 10, the islands exhibit flat surfaces, while for N ≥ 26, the island surfaces become corrugated and patterned. For the intermediate range, i.e., 12 ≤ N ≤ 24, both flat and patterned surfaces coexist, with the percentage coverage of the patterned surface oscillating as a function of N. By performing density functional theory calculations, we demonstrate that the unusual surface pattern evolution in our MBE-grown β-Sn(100) islands is a result of the interplay between QSE-induced surface roughing and tensile strain-induced smoothening effect.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

NASA NTRS2008

Photocatalytic Coatings for Exploration and Spaceport Design

This project developed self-cleaning photocatalytic coatings that remove contamination without human intervention. The coatings chemically remove organic contaminants and leave no residue. The photocatalyst will not negatively affect other coating properties, especially corrosion resistance. Titanium dioxide, TiO2, is an extremely popular photocatalyst because of its chemical stability, nontoxicity, and low cost. TiO2 is commonly used in the photocatalytic oxidation of organic matter or pollutants in the gas and liquid phases. However, TiO2 does have some drawbacks. It has limited light absorption because of its large band-gap and suffers from a photonic efficiency of less than 10 percent for organic degradation. Dopants can lower the band-gap and improve efficiency. Since the photocatalytically active form of TiO2 is a nanocrystalline powder, it can be difficult to make a robust coating with enough catalyst loading to be effective. Photocatalysts become active when certain light energy is absorbed. When photons with an energy greater than the band-gap, Eg, (wavelengths shorter than 400 nm) impinge upon the surface of the TiO2, an electron-hole pair is formed. The electron-hole pair oxidizes adsorbed substances either directly or via reactive intermediates that form on the surface, such as hydroxyl radicals (OH) or superoxide ions (O2-). Several factors can influence the band-gap energy of TiO2, two of which are crystal structure and impurities. TiO2 exists as three crystal structures brookite, anatase, and rutile that can be controlled via heat treatment. Anatase is the most photocatalytically active crystal form of TiO2. Doping TiO2 with impurities can alter its band-gap energy, as well as its effectiveness as a catalyst. Depending on their size, dopant atoms can occupy either the substitutional or interstitial lattice positions. Atoms that are relatively large will assume the interstitial positions and create a much greater energy disturbance in the crystal than will smaller atoms that take on the substitutional positions. This energy disturbance narrows the band-gap and thus allows photons with longer wavelengths and smaller energies (such as those in the visible-light spectrum) to create electron-hole pairs. Raman spectroscopy was performed for the purpose of determining the crystal structure and the degree of crystallinity of the TiO2 particles. Reflectance measurements indicated the wavelengths of light absorbed by the different catalysts.

Source record↗

NASA NTRS1998

Comparison of Contamination Model Predictions to LDEF Surface Measurements

Contaminant deposition measurements have been made on species content and depth profiles on three experiments trays from the Long Duration Exposure Facility (LDEF), Auger, Argon sputtering, Electron Spectroscopy for Chemical Analysis (ESCA) and Scanning Electron Microscopy (SEM) analysis. The integrated spacecraft environment model (ISEM) was used to predict the deposition levels of the contaminants measured on the three trays. The details of the modeling and assumptions used are presented along with the predictions for the deposition on select surfaces on the trays. These are compared to the measured results. The trays represent surfaces that have a high atomic oxygen flux, and intermediate oxygen flux, and no oxygen flux. All surfaces received significant solar Ultraviolet flux. It appears that the atomic oxygen was the primary agent that caused significant deposition to occur. Surfaces that saw significant contaminant flux solar UV and no atomic oxygen did not show any appreciable levels of observable deposition. The implications of the atom ic oxygen interaction with contaminant deposits containing silicon contaminant sources is discussed. The primary contaminant sources are DC61104 adhesive and Z306 paint. The results and interpretation of the findings have a potential significant impact on spacecraft surfaces that are exposed to solar UV and atomic oxygen in low Earth orbit.

Gordon, Tim↗

NASA NTRS1989

Compensation for primary reflector wavefront error

In a telescope having primary and secondary reflectors, wherein the actual primary reflector surface deviates from an ideal primary reflector surface, such deviation is compensated for. At least one intermediate element forms an image of the primary surface onto the secondary surface, so each point on the secondary surface corresponds to a point on the primary surface. The secondary surface is formed with a deviation from an ideal secondary surface, with the piston distance of each point on the actual secondary surface equal to the piston distance of a corresponding point on the actual primary surface from the ideal primary surface. It is found that this results in electromagnetic (e.g., light) rays which strike a deviating area of the actual primary surface being brought to the same focus as if the actual primary surface did not have a deviation from an ideal primary surface.

Meinel, Aden B.↗

DOE OSTI2021

Effects of surface diffusion in electrocatalytic CO 2 reduction on Cu revealed by kinetic Monte Carlo simulations

We report Kinetic Monte Carlo (KMC) methods are frequently used for mechanistic studies of thermally driven heterogeneous catalysis systems but are underused for electrocatalysis. Here, we develop a lattice KMC approach for electrocatalytic CO 2 reduction. The work is motivated by a prior experimental report that performed electroreduction of a mixed feed of 12 CO 2 and 13 CO on Cu; differences in the 13 C content of C2 products ethylene and ethanol (Δ 13 C) were interpreted as evidence of site selectivity. The lattice KMC model considers the effect of surface diffusion on this system. In the limit of infinitely fast diffusion (mean-field approximation), the key intermediates 12 CO* and 13 CO* would be well mixed on the surface and no evidence of site selectivity could have been observed. Using a simple two-site model and adapting a previously reported microkinetic model, we assess the effects of diffusion on the relative isotope fractions in the products using the estimated surface diffusion rate of CO* from literature reports. We find that the size of the active sites and the total surface adsorbate coverage can have a large influence on the values of Δ 13 C that can be observed. Δ 13 C is less sensitive to the CO* diffusion rate as long as it is within the estimated range. We further offer possible methods to estimate surface distribution of intermediates and to predict intrinsic selectivity of active sites based on experimental observations. This work illustrates the importance of considering surface diffusion in the study of electrochemical CO 2 reduction to multi-carbon products. Our approach is entirely based on a freely available open-source code, so will be readily adaptable to other electrocatalytic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗