Search NASA⌕ Search

SEARCH · Search NASA

Results for “Surface physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Anisotropic surface state in a topological semimetal candidate Ta 3 SiTe 6

Using high-resolution angle-resolved photoemission spectroscopy, we studied the surface state of Ta 3 SiTe 6 , a candidate of topological semimetal protected by nonsymmorphic symmetry. Through photon-energy dependent measurements, the surface state near the Fermi level was detected. By determining the band dispersions, we found that the surface state is topological trivial. Around the surface Brillouin zone center, the surface bands disperse linear-like, forming a band crossing (zero energy gap) point at about 0.2 eV below the Fermi level. In Ta 3 SiTe 6 's rectangular surface Brillouin zone, the surface bands only cross the Fermi level along one axis, forming two hole-like Fermi pockets near surface Brillouin zone boundaries. Although the observed surface state is not topological, we proposed that its anisotropic Fermi surface topography could be potentially useful for future applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Plasma–liquid interactions in the presence of organic matter—A perspective

As investigations in the biomedical applications of plasma advance, a demand for describing safe and efficacious delivery of plasma is emerging. It is quite clear that not all plasmas are “equal” for all applications. This Perspective discusses limitations of the existing parameters used to define plasma in context of the need for the “right plasma” at the “right dose” for each “disease system.” The validity of results extrapolated from in vitro studies to preclinical and clinical applications is discussed. We make a case for studying the whole system as a single unit, in situ. Furthermore, we argue that while plasma-generated chemical species are the proposed key effectors in biological systems, the contribution of physical effectors (electric fields, surface charging, dielectric properties of target, changes in gap electric fields, etc.) must not be ignored.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Atomic-scale investigations of Ti 3 C 2 T x MXene surfaces

The family of two-dimensional (2D) carbides and/or nitrides, also known as MXenes, has generated great excitement within the scientific community and has been proposed for a wide variety of applications since its discovery. Despite this attention, there have been only limited studies of the atomically resolved local electronic and physical structure of MXene surfaces strongly affecting the physicochemical properties of these materials. Here, in this study, we report local structural, spectroscopic, and chemical investigations of the surfaces of Ti 3 C 2 T x flakes using scanning tunneling microscopy and spectroscopy, closely coupled to theoretical studies. Terminal groups are visualized and characterized, along with surface TiO 2 clusters formed upon exposure to air. Fundamental insight into the local electronic and chemical properties associated with different terminal groups on MXenes and their oxidation products is presented.

36 MATERIALS SCIENCE↗
DOE OSTI2024

PRISTINE: An Emulation Platform for PCB-Level Hardware Trojans

Printed circuit Boards (PCBs) are becoming increasingly vulnerable to malicious design alteration, also known as Trojan attacks, due to a distributed business model that often involves various untrusted parties. Such attacks can be mounted at various stages in the PCB life cycle. The relative ease of alteration of PCB hardware even after fabrication (due to physical access to surface-mounted critical components and traces) makes them attractive for an adversary to manipulate their functional/physical behavior for malicious intent. There is a growing need to explore viable Trojan attacks in a PCB, analyze their functional and physical characteristics (e.g., impact on power or delay), and study the effectiveness of countermeasures against these attacks. While simulation-based approaches for PCB Trojan insertion are effective at creating a large population of possible Trojans, they fail to provide functional feasibility analysis with a realistic workload for a trigger circuit. Also, they cannot estimate a Trojan’s side-channel footprint due to the unavailability of physical models of diverse PCB components. To address these deficiencies, in this paper, we present PRISTINE, a PCB-level emulation system for any integrity or physical tampering issues, specifically, hardware Trojan insertion. The need for building such an emulation platform to resolve PCB trust issues in the supply chain is also surveyed and discussed. Both custom Hardware Hacking (HaHa) boards and multiple commercial PCBs are then used to test the ability of the proposed system to emulate various hardware Trojans specially designed to exploit board-specific hardware characteristics. Experimental results on emulated board-level Trojans show that a wide range of Trojans can be successfully activated, thus enabling the expected payload effects on both types of boards to be studied and quantified. The resulting data are further analyzed to create PCB-level Trojan benchmarks. In particular, a comparative evaluation of the experimental results is used to propose a risk level metric that quantifies the probability of detection and degree of payload impact of each Trojan on a given commercial PCB.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Electronic structure and charge-density wave transition in monolayer $\mathrm{VS}_2$

Vanadium disulfide (VS 2 ) attracts elevated interests for its charge-density wave (CDW) phase transition, ferromagnetism, and catalytic reactivity, but the electronic structure of monolayer has not been well understood yet. Here we report synthesis of epitaxial 1T VS 2 monolayer on bilayer graphene grown by molecular-beam epitaxy (MBE). Angle-resolved photoemission spectroscopy (ARPES) measurements reveal that Fermi surface with six elliptical pockets centered at the M points shows gap opening at low temperature. Temperature-dependence of the gap size suggests existence of CDW phase transition above room temperature. Here, our observations provide important evidence to understand the strongly correlated electron physics and the related surface catalytic properties in two-dimensional transition-metal dichalcogenides (TMDCs).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

On the estimation of boundary layer heights: a machine learning approach

Abstract. The planetary boundary layer height (zi) is a key parameter used in atmospheric models for estimating the exchange of heat, momentum, and moisture between the surface and the free troposphere. Near-surface atmospheric and subsurface properties (such as soil temperature, relative humidity, etc.) are known to have an impact on zi. Nevertheless, precise relationships between these surface properties and zi are less well known and not easily discernible from the multi-year dataset. Machine learning approaches, such as random forest (RF), which use a multi-regression framework, help to decipher some of the physical processes linking surface-based characteristics to zi. In this study, a 4-year dataset from 2016 to 2019 at the Southern Great Plains site is used to develop and test a machine learning framework for estimating zi. Parameters derived from Doppler lidars are used in combination with over 20 different surface meteorological measurements as inputs to a RF model. The model is trained using radiosonde-derived zi values spanning the period from 2016 through 2018 and then evaluated using data from 2019. Results from 2019 showed significantly better agreement with the radiosonde compared to estimates derived from a thresholding technique using Doppler lidars only. Noteworthy improvements in daytime zi estimates were observed using the RF model, with a 50 % improvement in mean absolute error and an R2 of greater than 85 % compared to the Tucker method zi. We also explore the effect of zi uncertainty on convective velocity scaling and present preliminary comparisons between the RF model and zi estimates derived from atmospheric models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Role of Surface Termination in the Metal–Insulator Transition of V 2 O 3 (0001) Ultrathin Films

Surface termination is known to play an important role in determining the physical properties of materials. It is crucial to know how surface termination affects the metal–insulator transition (MIT) of V 2 O 3 films for both fundamental understanding and its applications. By changing growth parameters, we achieved a variety of surface terminations in V 2 O 3 films that are characterized by low-energy electron diffraction (LEED) and photoemission spectroscopy techniques. Depending upon the terminations, our results show that MIT can be partially or fully suppressed near the surface region due to the different fillings of the electrons at the surface and subsurface layers and the change of screening length compared to the bulk. Across MIT, a strong redistribution of spectral weight and its transfer from a high-to-low-binding energy regime is observed in a wide energy scale. Our results show that the total spectral weight in the low-energy regime is not conserved across MIT, indicating a breakdown of the “sum rules of spectral weight”, signature of a strongly correlated system. Such a change in spectral weight is possibly linked to the change in hybridization, lattice volume (i.e., effective carrier density), and the spin degree of freedom in the system that occurs across MIT. We find that MIT in this system is strongly correlation-driven, where the electron–electron interactions play a pivotal role. Furthermore, our results provide better insight into the understanding of the electronic structure of strongly correlated systems and highlight the importance of accounting for surface effects during interpretation of the physical property data mainly using surface-sensitive probes, such as surface resistivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Ionic Liquid-Enhanced Interfaces to Boost Reactive C O2 Capture

The addition of ionic liquids (ILs) to a mixture containing a molecular solvent and other ionic species can induce the heterogeneous redistribution of cations and anions at the gas–liquid interface. This nonuniform redistribution of cations and anions driven by the differences in the solvophilicity of ions can improve the thermophysical and interfacial properties of such mixtures, creating a local chemical environment that is conducive to some reactions. In this work, ILs are added to a mixture of potassium hydroxide (KOH) and ethylene glycol (EG), used as a reactive absorbent and electrolyte in the migration-assisted moisture-gradient (MAMG) process for CO 2 capture. Molecular dynamics (MD) simulations are employed to probe into the effects of complex ion–ion and ion–solvent interactions and to examine the chemical composition at the gas–liquid interface. A total of 12 systems are investigated using molecular simulations to identify trends in the performance of IL additives based on the choice of cation, anion, and IL concentration. The cation effects are studied using IL additives based on 1-ethyl-3-methylimidazolium ([EMIM] + ) and 1-butyl-3-methylimidazolium ([BMIM] + ), while the impact of anions is examined using additives based on dicyanamide [DCA] − , triflate [TfO] − , bistriflimide [NTf 2 ] − , and hexafluorophosphate [PF 6 ] − anions, respectively. The influence of the IL concentration is also evaluated at molar concentrations between 1% and 4%. The simulation results indicate that the use of IL additives can affect the physical CO 2 solubility, surface tension, and the localization of CO 2 around the [OH] − ions at the gas–liquid interface. It is also evident that the choice of cations, anions, and IL concentration determines the extent to which the IL additives impact the local physicochemical properties. Physical dissolution, diffusive transport, and interaction with [OH] − are critical intermediate steps toward reactive CO 2 capture using a liquid absorbent. Hence, the improvement in one or more of these properties, aided by IL additives, is expected to improve the overall CO 2 capture performance. Experiments reaffirmed the impact of IL additives on CO 2 capture performance and the sensitivity to the choice of the cation, anion, and concentration of the IL additive.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A sticky situation: The heterogeneity and implications of magma mush unlocking

Magma, partially molten rock below Earth's surface, can be made up of both fluid (melt) and particles (crystals). The relative fraction of the fluid and particles matters for the magma's mobility and ability to reach Earth's surface. Here we conduct physical laboratory experiments to examine the mechanisms through which a magma becomes mobile and the speed at which pure melt and infiltrate a mixture of fluids and particles. The results have implications for understanding magma mobility and the mechanisms that move magma to Earth's surface. Poster presented at the 2025 International Association of Volcanology and Chemistry of Earth's Interior Meeting (IAVCEI).

multiphase flows↗
DOE OSTI2021

Laser-Interference Surface Preparation for Enhanced Coating Adhesion and Adhesive Joining of Multi-Materials (Final Project Report)

This report investigates a laser-interference surface treatment as a non-contact, i.e., without major solid/liquid medium application or abrasion, and non-chemical surface preparation method for aerospace coating systems. It was proposed to use the laser-interference technique to structure surfaces of Al and/or Ti, creating "rough" surfaces with pre-engineered series of ridges and valleys at submicron scale. The science goal of this study was to develop an understanding of the surface microstructure, topology, and physical mechanisms that would improve adhesion and corrosion protection of Al2024-T3. Microstructure analysis indicates that the laser-interference structuring (LIS) was found to reduce the formation of CuMn-rich precipitates in Al 2024-T3 over a 500-800 nm depth from top surface. The X-cut and cross-hatch coating adhesion ratings indicate that the LIS specimens meet the performance requirements in the coating adhesion specifications by having a higher or identical ranking to those specimens prepared with current state-of-the-art chemical conversion or sulfuric acid anodizing. After the ASTM B117 corrosion exposure, it was found that the laser processed specimens exhibited only few blisters. It was found that the corrosion damage was minimized at a laser rastering speed of 4 mm/s, for which only 33% of specimens developed very minor corrosion damage. The ASTM D1654 creepage ratings, used to evaluate corrosion damage along the scribe lines, were found to be at least nine for all coated panels. These results indicate that the laser-interference technique with the additional acetone wiping has the potential to be further developed as a minor chemical surface preparation technique for chromate-containing epoxy primers coatings.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Challenges in atomic layer etching of gallium nitride using surface oxidation and ligand-exchange

Two atomic layer etching (ALE) methods were studied for crystalline GaN, based on oxidation, fluorination, and ligand exchange. Etching was performed on unintentionally doped GaN grown by hydride vapor phase epitaxy. For the first step, the GaN surfaces were oxidized using either water vapor or remote O 2 -plasma exposure to produce a thin oxide layer. Removal of the surface oxide was addressed using alternating exposures of hydrogen fluoride (HF) and trimethylgallium (TMG) via fluorination and ligand exchange, respectively. Several HF and TMG super cycles were implemented to remove the surface oxide. Each ALE process was monitored in situ using multiwavelength ellipsometry. X-ray photoelectron spectroscopy was employed for the characterization of surface composition and impurity states. Additionally, the thermal and plasma-enhanced ALE methods were performed on patterned wafers and transmission electron microscopy (TEM) was used to measure the surface change. The x-ray photoelectron spectroscopy measurements indicated that F and O impurities remained on etched surfaces for both ALE processes. Ellipsometry indicated a slight reduction in thickness. TEM indicated a removal rate that was less than predicted. In conclusion, we suggest that the etch rates were reduced due to the ordered structure of the oxide formed on crystalline GaN surfaces.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Fundamental chemical physics revealed by scattering reactive open-shell atoms from surfaces

The dynamics of reactive atoms at surfaces are centrally important to areas such as heterogeneous catalysis, corrosion, materials degradation in extreme environments, and plasma etching. Remarkably detailed understanding of dynamical processes at surfaces has been extracted from scattering molecules and inert atoms under well-defined conditions. However, traditional techniques for generating beams of reactive atoms often result in impure mixtures, broad energy distributions, and poorly defined contributions of metastable electronically excited atoms. In this perspective article, we review the state-of-the-art in reactive atom surface scattering with a focus on experiments performed under controlled conditions on well-defined surfaces. We highlight a new technique for controlled state-to-state scattering of polyelectronic atoms from surfaces, based on vacuum ultraviolet photolysis and state-selective ion imaging. The new capabilities provide an avenue for research into the underexplored area of excited state and spin selective chemical dynamics at surfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Plasma Surface Interactions: Predicting the Performance and Impact of Dynamic PFC Surfaces

The objective of this project is to develop, and integrate, high-performance simulation tools capable of predicting plasma-facing component (PFC) operating lifetime and the impact of the evolving surface morphology of tungsten-based PFCs on plasma contamination, including the dynamic recycling of fuel species and tritium retention, in future magnetic fusion devices. Establishing a fundamental physical understanding and developing predictive capabilities of plasma-surface interactions (PSI) requires simultaneously addressing complex and diverse physics occurring over a wide range of length (Angstroms to meters) and time (femtoseconds to years) scales, as well as integrating extensive physical processes across the plasma–surface interface. This requires development of not only detailed physics models and computational strategies at each scale, but also algorithms and methods to couple them effectively in a way that can be robustly validated. Deploying these tools requires the continued development and coupling of leadership-scale computational codes to describe the boundary plasma and the evolving PFC surface, as well as a host of simulations that bridge disparate scales to address complex physical and computational issues at the plasma–surface interface in multi-component materials systems for magnetic fusion energy development beyond ITER.

36 MATERIALS SCIENCE↗