Search NASA⌕ Search

SEARCH · Search NASA

Results for “TELLURIDE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Charge density wave order, local lattice distortions, and topological electronic states in Nb Te 4

Assessing the atomic and electronic structure of strongly correlated systems in which the crystal symmetry changes due to emergent lattice distortions, such as charge density waves (CDWs), is nontrivial because the distortions are not necessarily amenable to a traditional crystallographic description. Using advance scattering and modeling techniques, we reveal the evolution of the atomic displacement modes behind the CDW phases of quasi-one-dimensional NbTe 4 and also derive the so far unknown atomic structure of its low-temperature commensurate (C) CDW phase. Electronic structure calculations based on the experimental C-CDW structure data predict the existence of Dirac fermions whose multiplicity turns out to depend on the degree of lattice distortions accounted for in the experimental structure derivation. Finally, we argue that the electronic structure of CDW systems in general, and in particular in transition metal tetra-tellurides, can be strongly impacted by local lattice distortions and, therefore, they should be fully accounted for when their rich physics is considered.

36 MATERIALS SCIENCE↗

Magnon gap tuning in lithium-doped MnTe

Manganese telluride (MnTe) is a prospective platform for ultrafast carrier dynamics, spin-based thermoelectrics, and magnon-drag transport due to its unique electronic and magnetic properties. We use inelastic neutron scattering to study both pure and lithium-doped MnTe, focusing on the influence of doping in opening a magnon gap. We use neutron powder diffraction to determine critical exponents for the phase transition in both pure and Li-doped MnTe and complement this information with muon spin rotation/relaxation. In conclusion, the opening of the magnon gap and spin reorientation in Li-doped MnTe is mainly due to increased magnetic anisotropy along the [001] axis, a feature not present in pure MnTe.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fractional AC Josephson effect in a topological insulator proximitized by a self-formed superconductor

A lateral Josephson junction in which the surface of a 3D topological insulator serves as the weak link should support topologically protected excitations related to Majorana fermions. The resulting 4π-periodic current-phase relationship could be detected under high-frequency excitation by the suppression of odd Shapiro steps. Here, in this study, we demonstrate such devices through the self-formation of a Pd-Te superconducting layer from a telluride topological insulator, and observe suppressed first and third Shapiro steps. Other devices, including those where the Pd-Te layer is bolstered by an additional Al layer, show no suppression of Shapiro steps, a difference supported by simulations. Though we rule out the known trivial causes of suppressed Shapiro steps in our devices, we nevertheless argue that corroborating measurements and disorder-aware theoretical descriptions of these systems are needed before confidently claiming the observation of Majorana states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Role of locally polar regions in the superconductivity of SrTiO 3

Understanding the interaction between polar and superconducting order parameters may hold the key to several classes of superconductors that remain poorly understood, including SrTiO 3 and several tellurides. Here we show that doped, strained SrTiO 3 films can exhibit both global or local polar order, respectively, depending on the amount of epitaxial mismatch strain, thereby providing a platform to understand how inversion symmetry breaking affects superconductivity. We find that the superconducting critical temperature correlates with the length scale of polar order. In particular, the transition temperature is enhanced when polar nanodomains are sufficiently large or, in the extreme limit, films are globally ferroelectric. In these cases, the Cooper pairs reside in a noncentrosymmetric environment. Conversely, low transition temperatures are found when the nanodomains are small. The findings point to the length scale of polar nanodomains and spin-orbit coupling as important parameters controlling the superconductivity of SrTiO 3 . Furthermore, the ability to control the size of the polar domains opens up new opportunities to design and control the nature of superconductivity in a wide range of materials.

36 MATERIALS SCIENCE↗

Recent Advancements in Reconfigurable mmWave Devices Based on Phase-Change and Metal Insulator Transition Materials

Chalcogenide Phase Change Materials (PCM) and metal insulator transition (MIT) materials are a group of materials that are capable of switching between low resistance and high resistance states. These emerging materials have been widely used in optical storage media and memory devices. Over the past recent years, there have been interests in exploiting the PCM and MIT materials, especially germanium antimony telluride (GST) alloys and vanadium dioxide (VO 2 ), for radio frequency (RF) applications. The PCM and MIT-based RF devices are expected to bridge the gap between semiconductor switches and microelectromechanical system (MEMS) switches as they combine the low insertion loss performance of MEMS technology and the small size and reliability performance of semiconductor technology. This article presents an overview of the PCM and MIT materials for RF circuits and discusses the recent advancements in reconfigurable millimeter-wave (mmWave) devices based on PCM and MIT materials in depth.

36 MATERIALS SCIENCE↗

Top-Performing Photovoltaic Cells Compared to the Shockley–Queisser Limit

Top-performing single-junction and two-terminal tandem devices that include at least one polycrystalline cell are compared with each other and their ideal limits. The parameters of open-circuit voltage, short-circuit current, and fill-factor are individually compared to the Shockley–Queisser limit to investigate where different technologies have room to improve. Technologies, such as silicon and cadmium telluride have the most room for improvement in open-circuit voltage currently utilizing 87% and 81% of their maxima, respectively. Detailed diode and fill-factor loss analysis is presented for single-junction devices to give further insight on how they compare and where efficiency is lost. Single-crystal technologies demonstrate a fill-factor closer to the Shockley–Queisser limit than polycrystalline devices. The high diode quality factor of polycrystalline devices is the leading cause of the decreased fill-factor. Similar analysis on tandem cells with at least one thin-film cell shows that although their efficiency exceeds that of the single-junction cells, the fraction of their ideal efficiency is smaller. Here, by comparing parameters to the Shockley–Queisser limit, it becomes clearer where certain technologies have the potential for improvement.

High efficiency↗

Doping of CdTe Using CuCl2 Solution for Highly Efficient Photovoltaic Devices

Here, we report doping of cadmium telluride (CdTe) thin film solar cells using copper (II) chloride (CuCl 2 ) solution in deionized water. The CdTe thin films were immersed in 0.1 mmol CuCl 2 solution in water and annealed in the temperature range of 180-240 degrees C for various time durations. The devices were completed using thermally evaporated gold (Au) and measured under simulated AM1.5G spectrum. The average device efficiency of CuCl 2 treated CdTe devices increased to 13.7 % (best cell reaching 14.0%) with significant improvement on open-circuit voltage (VOC ) as compared with 12.4% (best cell 12.7%) for thermally evaporated Cu doped CdTe devices. For CuCl 2 treated CdTe devices, we found higher photoluminescence (PL) intensity and longer carrier life time at room temperature indicating solution based doping offers better control of Cu doping density as compared with evaporated Cu.

14 SOLAR ENERGY↗

Human Health Risk Assessment for Improper Landfill Disposal of End-of-Life CdTe PV

The present work is a continuation of the 2020 IEA PVPS Task 12 Human Health Risk Assessment Methods for PV Part 3: Module Disposal Risks. The 2020 report performed a human health risk assessment (HHRA) for disposal of a cadmium telluride (CdTe) PV module in an unlined landfill, focusing solely on risks from cadmium. This study extends the 2020 HHRA on CdTe PV, analyzing eleven constituent elements: Cd, Se, Te, Cu, Si, Cr(III), Mo, Sn, Zn, Ni, and Al. The present HHRA was performed through two methods: utilization of the U.S. Environmental Protection Agency's (USEPA) Delisting Risk Assessment Software (DRAS V.4.0) on eight exposure pathways for cancer risk and non-cancer hazards; and comparison of exposure point concentrations to federal standards for groundwater, surface water, air, and soil exposure pathways. Cancer risks and non-cancer hazards posed by elemental leaching through all evaluated exposure pathways, using both methods, were found to be several orders of magnitude below USEPA health-protective thresholds. Cadmium exhibited both the highest risks and lowest uncertainty considering data availability on chemical content, leachate, and federal screening levels.

chemicals↗

Thorium model and weak 5f delocalization

Recently, it was demonstrated that an empirical model based on bremsstrahlung isochromat spectroscopy of elemental thorium (Th) could be used to explain the experimental results and unoccupied 5f electronic structure for simple localized actinide systems with n = 2/3, 2, 3, and 5, where n is the 5f occupancy. In this work, the thorium model will be extended to provide an understanding of the observed behavior and unoccupied 5f electronic structure in the uranium monochalcogenide systems of uranium sulfide and uranium telluride, in terms of weak 5f delocalization.

36 MATERIALS SCIENCE↗

Covalent surface modifications and superconductivity of two-dimensional metal carbide MXenes

Versatile chemical transformations of surface functional groups in two-dimensional transition-metal carbides (MXenes) open up a previously unexplored design space for this broad class of functional materials. We introduce a general strategy to install and remove surface groups by performing substitution and elimination reactions in molten inorganic salts. Successful synthesis of MXenes with oxygen, imido, sulfur, chlorine, selenium, bromine, and tellurium surface terminations, as well as bare MXenes (no surface termination), was demonstrated. These MXenes show distinctive structural and electronic properties. For example, the surface groups control interatomic distances in the MXene lattice, and Ti n +1 C n ( n = 1, 2) MXenes terminated with telluride (Te 2− ) ligands show a giant (>18%) in-plane lattice expansion compared with the unstrained titanium carbide lattice. The surface groups also control superconductivity of niobium carbide MXenes.

Kamysbayev, Vladislav↗

Discovery of segmented Fermi surface induced by Cooper pair momentum

Imaging a peculiar Fermi surface Running a current through a superconductor can cause the superconducting gap to close on a section of the Fermi surface. However, observing this segmented Fermi surface directly is tricky. To do so, Zhu et al . worked with a thin film of the topological insulator bismuth telluride placed on top of superconducting niobium diselenide. A small applied magnetic field caused a screening current, which in turn led to a segmented Fermi surface in the topological insulator layer. Using a scanning tunneling microscope, the researchers were able to map out this Fermi surface. —JS

Science & Technology - Other Topics↗

Role of Oxygen on Chemical Segregation in Uncapped Ge 2 Sb 2 Te 5 Thin Films on Silicon Nitride

Germanium antimony telluride has been the most used and studied phase-change material for electronic memory due to its suitable crystallization temperature, amorphous to crystalline resistance contrast, and stability of the amorphous phase. In this paper, the segregation of Ge in a Ge 2 Sb 2 Te 5 film of 30 nm thickness during heating inside the transmission electron microscope was observed and characterized. Furthermore, Ge 2 Sb 2 Te 5 film was deposited using sputtering on a Protochips Fusion holder and left uncapped in atmosphere for about four months. Oxygen incorporated within the film played a significant role in the chemical segregation observed which resulted in amorphous Ge-O island boundaries and Sb and Te rich crystalline domains. Such composition changes can occur when the phase-change material interfaces insulating oxide layers in an integrated device and can significantly impact its electrical and thermal properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Standoff Detection of Oil and Powder Mixtures at 12 Meters Using a Tunable Quantum Cascade Laser-Based System with a Close Focus Telescope and Uncooled Infrared Detector

We have designed and demonstrated a quantum cascade laser (QCL) based standoff system that utilizes an uncooled mercury cadmium telluride (MCT) detector with lock-in signal processing for chemical identification at a distance of 12.5 meters in indoor ambient light conditions. In the system, a tunable quad-QCL operating (1 MHz) in quasi-continuous wave mode between 8.45 and 10.03 μm (~1182 to 1000 cm –1 ) serves as the active mid-infrared source for remotely interrogating mineral, powder, and thin film oil samples including powder mixtures (6, 12.5, 25, and 50%) of crystalline quartz (SiO 2 ) in KBr. Light as reflected from a given sample is collected using a 10-inch (25.4 cm) Dall Kirkham telescope and coupled with ZnSe optics to an uncooled MCT detector. Furthermore, the mixture dependence of the highly transparent KBr and strongly absorbing quartz was found to fit a modified version of the Schatz reflectance model for compacted powder mixtures. All reflectance spectra reported are relative to an Au-coated diffuse reflector. A NIST traceable polystyrene standard reflector was also used to determine the QCL wavelength tuning range and calibration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamically tunable second-harmonic generation using hybrid nanostructures incorporating phase-change chalcogenides

Nonlinear metasurfaces with high conversion efficiencies have been vastly investigated. However, strong dynamic tunability of such devices is limited in conventional passive plasmonic and dielectric material platforms. Germanium antimony telluride (GST) is a promising phase-change chalcogenide for the reconfiguration of metamaterials due to strong nonvolatile changes of the real and imaginary parts of the refraction index through amorphous-crystalline phase change. The orderly structured GST has an even higher potential in tunable second-harmonic generation (SHG) with a non-centrosymmetric crystal structure at the crystalline phase, while the amorphous phase of GST does not exhibit bulk second-order nonlinearity. Here, we experimentally demonstrate SHG switches by actively controlling the crystalline phase of GST for a GST-based hybrid metasurface featuring a gap-surface plasmon resonance, and a quarter-wave asymmetric Fabry–Perot (F–P) cavity incorporating GST. We obtain SHG switches with modulation depths as high as ~ 20 dB for the wavelengths at the on-state resonance. We also demonstrate the feasibility of multi-level SHG modulation by leveraging three controlled GST phases, i.e., amorphous, semi-crystalline, and crystalline, for the gap-surface plasmon hybrid device, which features stronger light–matter interaction and has higher resonant SHG efficiencies than the asymmetric F–P cavity device at respective GST phases. This research reveals that GST-based dynamic SHG switches can be potentially employed in practical applications, such as microscopy, optical communication, and photonic computing in the nonlinear regime.

42 ENGINEERING↗

Materials Data on GaAs by Materials Project

GaAs is High Pressure Cadmuum Telluride structured and crystallizes in the orthorhombic Pmm2 space group. The structure is three-dimensional. Ga3+ is bonded in a linear geometry to two equivalent As3- atoms. Both Ga–As bond lengths are 2.73 Å. As3- is bonded to two equivalent Ga3+ and four equivalent As3- atoms to form a mixture of edge and corner-sharing AsGa2As4 octahedra. The corner-sharing octahedra tilt angles range from 0–1°. There are two shorter (2.71 Å) and two longer (2.72 Å) As–As bond lengths.

36 MATERIALS SCIENCE↗

Materials Data on V5S4 by Materials Project

V5S4 is Titanium telluride structured and crystallizes in the tetragonal I4/m space group. The structure is three-dimensional. there are two inequivalent V sites. In the first V site, V is bonded to five equivalent S atoms to form a mixture of distorted corner and edge-sharing VS5 square pyramids. There are a spread of V–S bond distances ranging from 2.33–2.41 Å. In the second V site, V is bonded in a distorted square co-planar geometry to four equivalent S atoms. All V–S bond lengths are 2.51 Å. S is bonded in a 6-coordinate geometry to six V atoms.

36 MATERIALS SCIENCE↗

Materials Data on Ti5Se4 by Materials Project

Ti5Se4 is Titanium telluride structured and crystallizes in the tetragonal I4/m space group. The structure is three-dimensional. there are two inequivalent Ti sites. In the first Ti site, Ti is bonded in a square co-planar geometry to four equivalent Se atoms. All Ti–Se bond lengths are 2.71 Å. In the second Ti site, Ti is bonded to five equivalent Se atoms to form a mixture of distorted edge and corner-sharing TiSe5 square pyramids. There are a spread of Ti–Se bond distances ranging from 2.60–2.63 Å. Se is bonded in a 6-coordinate geometry to six Ti atoms.

36 MATERIALS SCIENCE↗

Materials Data on CdTe by Materials Project

CdTe is High Pressure Cadmuum Telluride structured and crystallizes in the orthorhombic Pmm2 space group. The structure is three-dimensional. Cd2+ is bonded in a linear geometry to two equivalent Te2- atoms. Both Cd–Te bond lengths are 3.19 Å. Te2- is bonded to two equivalent Cd2+ and four equivalent Te2- atoms to form a mixture of edge and corner-sharing TeCd2Te4 octahedra. The corner-sharing octahedra tilt angles range from 0–1°. There are two shorter (3.09 Å) and two longer (3.10 Å) Te–Te bond lengths.

36 MATERIALS SCIENCE↗