Search NASA⌕ Search

SEARCH · Search NASA

Results for “TOKAMAK DEVICES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Plasma density injection and flow during coaxial helicity injection in a tokamak

Whole device, resistive MHD simulations of spheromaks and tokamaks have used a large diffusion coefficient that maintains a nearly constant density throughout the device. In the present work, helicity and plasma are coinjected into a low-density plasma in a tokamak with a small diffusion coefficient. As in previous simulations [Hooper et al., Phys. Plasmas 20, 092510 (2013)], a flux bubble is formed, which expands to fill the tokamak volume. The injected plasma is non-uniform inside the bubble. The flow pattern is analyzed; when the simulation is not axisymmetric, an n = 1 mode on the surface of the bubble generates leakage of plasma into the low-density volume. Closed flux is generated following injection, as in experiments and previous simulations. The result provides a more detailed physics analysis of the injection, including density non-uniformities in the plasma that may affect its use as a startup plasma [Raman et al., Phys. Rev. Lett. 97, 175002 (2006)].

Hooper, E. B. (ORCID:0000000251197451)↗

The Microwave-Heated Bumpy Torus: A Concept for Fusion Energy

In the last 3 decades, giant steps in technology and simulations capability have been made for the benefit of all magnetic fusion concepts. This is especially true for virtually a one-of-a-kind device, a microwave-driven bumpy-torus magnetic-fusion-energy system. In the 1980s, the prototype experiment was technology limited, and it was judged based on unrealistic expectations from an incomplete understanding of the machine performance. For those experiments, the machine did not achieve the theoretical stability threshold to demonstrate good plasma confinement. This paper examines the premise that the experimental platform was underpowered, which prevented acceptance of its value for fusion. In this paper, the experimental plasma scaling data with power are reviewed. If, with the advancements of technology and simulations capability of the last 30 years, stable operation can be proven, a much improved device competitive with tokamak and stellarator performance may be possible. The advantages of this concept include steady-state operation, gentle shut down, modular construction for fabrication and maintenance, and the natural diversion of impurities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The dynamics of ion with electrostatic waves in a sheared magnetic field

The interaction between an ion and multiple electrostatic waves propagating perpendicularly to an ambient magnetic field with shear is investigated. Based on the Lie transformation method, with the wave amplitude and the magnetic shear both as the perturbation parameters, the analytical formulas for the reduced Hamiltonian is derived and results are compared with numerical calculations of the complete equations of motion for the case of two on-resonance waves and the case of two off-resonance waves, respectively. It is found that the effect of magnetic shear drastically prevents the acceleration of an ion in both cases. This result will help us to understand the behaviors of ions in a magnetic sheared device, such as tokamak.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A mode converter to generate a Gaussian-like mode for injection into the VENUS electron cyclotron resonance ion source

A number of superconducting electron cyclotron resonance (ECR) ion sources use gyrotrons at either 24 or 28 GHz for ECR heating. In these systems, the microwave power is launched into the plasma using the TE{sub 01} circular waveguide mode. This is fundamentally different and may be less efficient than the typical rectangular, linearly polarized TE{sub 10} mode used for launching waves at lower frequencies. To improve the 28 GHz microwave coupling in VENUS, a TE{sub 01}-HE{sub 11} mode conversion system has been built to test launching HE{sub 11} microwave power into the plasma chamber. The HE{sub 11} mode is a quasi-Gaussian, linearly polarized mode, which should couple strongly to the plasma electrons. The mode conversion is done in two steps. First, a 0.66 m long “snake” converts the TE{sub 01} mode to the TE{sub 11} mode. Second, a corrugated circular waveguide excites the HE{sub 11} mode, which is launched directly into the plasma chamber. The design concept draws on the development of similar devices used in tokamaks and stellerators. The first tests of the new coupling system are described below.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characterization of intermittent bursts at the edge of the CASTOR tokamak

Temporal characteristics of density bursts in the scrape-off layer of the CASTOR tokamak were investigated. Intermittent positive bursts of density are observed by means of a radial array of Langmuir probes. Globally (comparing the closest and furthermost radial positions with respect to the center of the discharge chamber) we observe a radial decrease of average burst rate together with a radial increase of the average burst duration. Recently, we observed a monotonic radial decrease of average burst rate together with an increase of the average burst duration in the Tore Supra tokamak [1, 2], but the decay length is significantly shorter than in CASTOR. This is most probably due to radially elongated turbulent events (streamers), which govern the radial transport at the edge of the CASTOR tokamak [3] and are responsible for the appearance of density bursts.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental verification of the method for detection of water microleakages in plasma vacuum chambers by using the hydroxyl spectrum

Experimental determination of the sensitivity of the method for detection of water microleakages in the cooling systems of the plasma vacuum chambers of complex electrophysical devices (such as tokamaks, fuel elements of nuclear reactors, and plasmachemical reactors) is considered. It was shown that the spectroscopic method for detection of water microleakages by using the hydroxyl radiation spectrum makes it possible to detect leakages at a level of 10{sup -5} Pa m{sup 3} s{sup -1}. The spatial resolution of the method allows one to localize defects with an accuracy of several centimeters.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Final Report for "Extending BOUT++ for Solution of Edge Plasma Equations for Use in Whole Device Simulation of Tokamaks"

In this Phase I project we have extended the BOUT++ code to solve edge fluid equations. We added a simple neutral fluid model, created a mesh generator as well as collected a set of difficult test problems for benchmarking edge codes. The work in this project should be useful as a starting point to build a complete set of edge fluid equations in BOUT++ that would enhance its ability to not only perform edge turbulence calculations, but also allow the coupled transport-turbulence equations evolved in an efficient manner.

99 GENERAL AND MISCELLANEOUS↗

Splitting of the m=n=1 modes in hybrids with q{sub min}<1

The frequency splitting between m=n=1 eigenmodes in tokamak discharges with two q=1 surfaces and sheared toroidal rotation has been calculated. The instability domain of the ''doublet'' in the parameter space has been established for the first time. The results are consistent with observations of the frequency splitting in ASDEX Upgrade [O. Gruber et al., Nucl. Fusion 39, 1321 (1999)] and DIII-D [J. Luxon, Nucl. Fusion 42, 614 (2002)] tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Runaway-loss induced negative and positive loop voltage spikes in the Aditya Tokamak

Negative spikes followed by positive ones in the loop voltage signal during the discharge are observed in the Aditya Tokamak [S. B. Bhatt et al., Indian J. Pure Appl. Phys. 27, 710 (1989)]. These spikes are always accompanied by hard x-ray bursts caused by sudden loss of runaway electrons. The observed growth of m=3 mode seemed responsible for the losses of localized beams of runaway electrons (E{sub {gamma}{approx}1}-5 MeV) from the plasma region around q=3 magnetic surface. The movement of these runaway electrons during their extraction from inside the plasma induces both positive and negative electric fields at those locations. In this paper, a one-dimensional toroidal electric field diffusion model is used to estimate the induced electric field at the plasma boundary, which matches quite well with the observed spikes in loop voltage in both magnitude as well as its temporal evolution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structure and dynamics of sawteeth crashes in ASDEX Upgrade

The crash phase of the sawteeth in ASDEX Upgrade tokamak [Herrmann et al., Fusion Sci. Technol. 44(3), 569 (2003)] is investigated in detail in this paper by means of soft x-ray (SXR) and electron cyclotron emission (ECE) diagnostics. Analysis of precursor and postcursor (1,1) modes shows that the crash does not affect the position of the resonant surface q=1. Our experimental results suggest that sawtooth crash models should contain two ingredients to be consistent with experimental observations: (1) the (1,1) mode structure should survive the crash and (2) the flux changes should be small to preserve the position of the q=1 surface close to its original location. Detailed structure of the reconnection point was investigated with ECE imaging diagnostic. It is shown that reconnection starts locally. The expelled core is hot which is consistent with SXR tomography results. The observed results can be explained in the framework of a stochastic model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Density profile sensitivity study of ASDEX Upgrade ICRF Antennas with the TOPICA code

During operation of the ASDEX Upgrade (AUG) ion cyclotron radio frequency (ICRF) system, Tungsten (W)-coated poloidal limiters and structures connected along magnetic field lines to the antenna can be sources of W, which is attributed to sputtering by ions accelerated in radio frequency (RF) sheaths. In order to analyze and optimize the ICRF antenna performance, accurate and efficient simulation tools are necessary. TOPICA code was developed for analysis of ICRF antenna systems with plasma loading conditions modeled with ID FELICE code. This paper presents an initial comparative analysis of two AUG ICRF antennas for a set of model plasma density profiles (with varying density gradient and antenna cut-off distance). The antennas are presently installed in AUG and differ in that one was partially optimized using HFSS code to reduce E{sub ||} near fields. Power transferred to plasma and sheath driving RF potentials are computed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Direct Electron Heating Observed by Fast Waves in ICRF Range on a Low-Density Low Temperature Tokamak ADITYA

Fast wave electron heating experiments are carried out on Aditya tokamak [R = 0.75 m, a = 0.25m,Bt = 0.75T,ne{approx}1-3E13/cc,Te{approx}250eV] with the help of indigenously developed 200 kW, 20-40 MHz RF heating system. Significant direct electron heating is observed by fast waves in hydrogen plasma with prompt rise in electron temperature with application of RF power and it increases linearly with RF power. A corresponding increase in plasma beta and hence increase in stored diamagnetic energy is also observed in presence of RF. We observe an improvement of energy confinement time from 2-4msec during ohmic heating phase to 3-6msec in RF heating phase. This improvement is within the ohmic confinement regime for the present experiments. The impurity radiation and electron density do not escalate significantly with RF power. The direct electron heating by fast wave in Aditya is also predicted by ion cyclotron resonance heating code TORIC.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Direct Observation of Current in Type-I Edge-Localized-Mode Filaments on the ASDEX Upgrade Tokamak

Magnetically confined plasmas in the high confinement regime are regularly subjected to relaxation oscillations, termed edge localized modes (ELMs), leading to large transport events. Present ELM theories rely on a combined effect of edge current and the edge pressure gradients which result in intermediate mode number (n congruent with 10-15) structures (filaments) localized in the perpendicular plane and extended along the field lines. By detailed localized measurements of the magnetic field perturbation associated to type-I ELM filaments, it is shown that these filaments carry a substantial current.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of pellet-triggered MHD events in the ASDEX upgrade

In order to gain deeper insight into the process of MHD activity triggered by pellets we extended our previous analysis (standard type-I edge localized modes (ELMs)) to type-I ELMs in radiative edge scenarios, type-III ELMs, the quiescent H-mode regime, and core mode activity such as neoclassical tearing modes or snakes. Pellet triggering of mode activity has turned out to be a quite general feature, but only in case of the ELMs can it be unambiguously attributed to prompt local impact by the pellet. For edge plasma conditions characterized by higher resistivity, the growth time of spontaneous ELMs increases while the plasma changes from the type-I into the type-III regime. However, pellet-triggered ELMs retain fast rise times. In the quiescent Hmode, pellets still trigger ELM-like mode activity, but no longer accompanied by a significant release of energy from the plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the nature of radial transport across sheared zonal flows in electrostatic ion-temperature-gradient gyrokinetic tokamak plasma turbulence

It is argued that the usual understanding of the suppression of radial turbulent transport across a sheared zonal flow based on a reduction in effective transport coefficients is, by itself, incomplete. By means of toroidal gyrokinetic simulations of electrostatic, ion-temperature-gradient turbulence, it is found instead that the character of the radial transport is altered fundamentally by the presence of a sheared zonal flow, changing from diffusive to anticorrelated and subdiffusive. Furthermore, if the flows are self-consistently driven by the turbulence via the Reynolds stresses (in contrast to being induced externally), radial transport becomes non-Gaussian as well. These results warrant a reevaluation of the traditional description of radial transport across sheared flows in tokamaks via effective transport coefficients, suggesting that such description is oversimplified and poorly captures the underlying dynamics, which may in turn compromise its predictive capabilities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mean and Oscillating Plasma Flows and Turbulence Interactions across the L-H Confinement Transition

A complex interaction between turbulence driven ExB zonal flow oscillations, i.e., geodesic acoustic modes (GAMs), the turbulence, and mean equilibrium flows is observed during the low to high (L-H) plasma confinement mode transition in the ASDEX Upgrade tokamak. Below the L-H threshold at low densities a limit-cycle oscillation forms with competition between the turbulence level and the GAM flow shearing. At higher densities the cycle is diminished, while in the H mode the cycle duration becomes too short to sustain the GAM, which is replaced by large amplitude broadband flow perturbations. Initially GAM amplitude increases as the H-mode transition is approached, but is then suppressed in the H mode by enhanced mean flow shear.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Upgrade and validation on plasma of the Tore Supra CW LHCD generator

A one year-long major upgrade of the 3.7 GHz Lower Hybrid Current Drive (LHCD) generator for the Tore Supra (TS) tokamak has been performed. It consisted in installing a first series of eight Thales Electron Devices (TED) 700 kW CW klystrons, new CW components and auxiliaries, and in modifying the transmitter control and protection software. Modifications and calibration of the sensors and the RF subsystems were completed as well. Finally, the RF power available in the generator has been increased by 35% and the pulse duration could reach 1000 s. A complete validation and optimization of the klystrons have been performed in 2010 on matched load before the generator could enter into operation. The eight klystrons connected with the Full Active Multijunction (FAM) antenna delivered 3.5 MW/50s in December 2010. The upgrade of the generator and the steps to validate the modifications are described.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗