Search NASA⌕ Search

SEARCH · Search NASA

Results for “TiO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Role of pH in the Formation of Structurally Stable and Catalytically Active TiO2-Supported Gold Catalysts

We report the investigation of titania (Degussa P25) supported gold catalysts prepared by magnetron sputtering. Catalysts grown on natural fumed titania were structurally unstable, resulting in the rapid coarsening of 2.4 nm gold clusters into large 20 nm gold clusters in a few days at room temperature under normal atmospheric conditions. However, treating the titania support powder to a mock deposition-precipitation process, at pH 4, followed by the subsequent deposition of gold onto this treated powder produced a remarkable enhancement in gold particle stability and a 20-fold enhancement of catalytic activity. Furthermore, it was found that treating the titania under basic conditions (pH 10) resulted in a further enhancement of structural stability and a further doubling of the reaction rate to 0.28 mol of CO/mol of Au s. This enhancement cannot be attributed to removing surface Cl- species from the titania, the formation of oxygen vacancies on the TiO2 surface, or an electronic effect. Instead, it appears to be associated with the formation of strongly bound hydroxyl species on the TiO2 surface. The formation of surface hydroxyls during the deposition-precipitation method is coincidental and contributes significantly to the properties of Au/TiO2 catalysts

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aqueous Phase Aldol Condensation of Formaldehyde and Acetone on Anatase TiO2(101) Surface: A Theoretical Investigation

A mechanistic understanding of catalytic reactions at solid-liquid interface is limited both experimentally and theoretically but attracts much interest. Using density functional theory calculations (DFT) and ab initio molecular dynamics (AIMD) simulations, we investigated the effect of liquid water on a-H abstraction, C-C coupling, and dehydration steps of aldol condensation of formaldehyde and acetone on an anatase TiO2(101) surface. The existence of the aqueous phase lowered the Gibbs energy of activation of dehydration step pronouncedly from 187 to 74 kJ/mol through proton transfer mechanism, making the hydrogenation pathway more favorable in the aqueous phase. In contrast, a mixed route prevails in the vapor phase. This work provides insights into the effect of the bulk water through a proton transfer mechanism on the dehydrogenation, C-C coupling, and dehydration

anatase TiO2, formaldehyde and acetone, aldol cond↗

Impact of nonadiabatic charge transfer on the rate of redox chemistry of carbon oxides on rutile TiO2 (110) surface

We present the results of a density functional theory (DFT) within the LDA+U approximation on large models of partially reduced TiO2 (110) rutile surface to investigate the nature of charge transfer and the role of non-adiabatic effects on three prototypical redox reactions: (i) O2 adsorption (ii) CO oxidation and (iii) CO2 reduction. Charge-constrained DFT (cDFT) is used to estimate kinetic parameters for a Marcus theory rate law that accounts for adiabatic coupling effects on reaction rates. We find that for O2 adsorption, the coupling between adiabatic states is strong, leading to fast charge transfer rates. The lowest energy structures at high coverage consist of two chemisorbed O2-, one adsorbed at a VO site and the other adsorbed at an adjacent Ti5C site. For CO oxidation, however, all reactions are kinetically hindered on the ground state due to the weak adiabatic coupling at the state crossing, such that one has to overcome two kinetically unfavorable charge transfer events to drive the process (non-adiabatically) on the thermal ground state. The process can be driven by photochemical means but would result in an adsorbed radical [OCOO-] intermediate species. Similarly, CO2 reduction also proceeds via a non-adiabatic charge transfer to form an adsorbed CO2- species followed by a second non-adiabatic charge transfer to produce CO. Our analysis provides important computational guidelines for modeling these types of processes. We thank Z. Dohnalek, M. Hendersen, G. Kimmel, H. Metieu, and N. Petrik for invaluable discussions. This work was supported by the US Department of Energy, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences and performed at the Pacific Northwest National Laboratory (PNNL). PNNL is a multi-program national laboratory operated for DOE by Battelle. Computational resources were provided at W. R. Wiley Environmental Molecular Science Laboratory (EMSL), a national scientific user facility sponsored by the Department of Energy’s Office of Biological and Environmental Research located at PNNL and the National Energy Research Scientific Computing Center (NERSC) at Lawrence Berkeley National Laboratory.

charge transfer↗

Direct Observation of Site Specific Molecular Chemisorption of O2 on TiO2 (110)

Molecularly chemisorbed O2 species were directly imaged on reduced TiO2(110) at 50 K with high-resolution scanning tunneling microscopy (STM). Two different O2 adsorption channels, one at bridging oxygen vacancies (VO) and another at five-fold coordinated terminal titanium atoms (Ti5c), have been identified. While O2 species at Ti5c site appears as a single protrusion centered on the Ti5c row, the O2 at VO manifests itself by a disappearance of the VO feature. It is found that STM tip can easily dissociate O2 species, unless extremely low magnitudes of the tunneling parameters are used. The O2 molecules chemisorbed at low temperatures at these two distinct sites are the most likely precursors for the two previously established O2 dissociation channels, observed at temperatures above 150 and 230 K at the VO and Ti5c sites, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coupled cluster calculations on TiO2 nanoclusters

The excitation energies of the four lowest-lying singlet excited states of the TiO2 Ti2O4 and Ti3O6 clusters are calculated by a variety of different Equation-of-Motion Coupled Cluster (EOM-CC) approaches in order to obtain benchmark values for the optical excitations of titanium dioxide clusters. More specifically we investigate what is the effect of the inclusion of triple excitations "triples" in the (EOM-)CC scheme on the calculated excited states of those clusters. While for the monomer and dimer the inclusion of triples causes only a rigid shift in the excitation energies, in the case of the trimer the crossing of the interested states is observed. Coupled cluster approaches where triples are treated perturbatively were found to offer no advantage over EOM-CCSD, whereas the active-space methods (EOM-CCSDt(II/I)) proved to yield results very close to the full EOM-CCSDT, but at a much lower computational cost.

calculations↗

Nanoporous Tio2 Water Training Data

Data and input files used to train a Deep Potential (DP) model for the nanoporous TiO2-water interface. The DeepMD-kit code was used to train the DP. Information about data format, and how to use DeepMD-kit can be found at https://docs.deepmodeling.com/projects/deepmd/en/master/

08 HYDROGEN↗

Materials Data on TiO2 by Materials Project

TiO2 is Rutile structured and crystallizes in the tetragonal P4_2/mnm space group. The structure is three-dimensional. Ti4+ is bonded to six equivalent O2- atoms to form a mixture of corner and edge-sharing TiO6 octahedra. The corner-sharing octahedral tilt angles are 49°. There is four shorter (1.96 Å) and two longer (2.00 Å) Ti–O bond length. O2- is bonded in a distorted trigonal planar geometry to three equivalent Ti4+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on TiO2 by Materials Project

TiO2 is zeta iron carbide-like structured and crystallizes in the orthorhombic Pbcn space group. The structure is three-dimensional. Ti4+ is bonded to six equivalent O2- atoms to form a mixture of distorted edge and corner-sharing TiO6 octahedra. The corner-sharing octahedra tilt angles range from 51–52°. There are a spread of Ti–O bond distances ranging from 1.88–2.13 Å. O2- is bonded in a distorted trigonal planar geometry to three equivalent Ti4+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on TiO2 by Materials Project

TiO2 is beta Vanadium nitride-like structured and crystallizes in the orthorhombic Pbca space group. The structure is three-dimensional. Ti4+ is bonded to six O2- atoms to form a mixture of edge and corner-sharing TiO6 octahedra. The corner-sharing octahedra tilt angles range from 21–57°. There are a spread of Ti–O bond distances ranging from 1.87–2.10 Å. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted trigonal planar geometry to three equivalent Ti4+ atoms. In the second O2- site, O2- is bonded in a distorted T-shaped geometry to three equivalent Ti4+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on TiO2 by Materials Project

TiO2 is trigonal omega-like structured and crystallizes in the cubic Fd-3m space group. The structure is three-dimensional. Ti4+ is bonded to six equivalent O2- atoms to form edge-sharing TiO6 octahedra. All Ti–O bond lengths are 1.99 Å. O2- is bonded in a 3-coordinate geometry to three equivalent Ti4+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on TiO2 by Materials Project

TiO2 is beta Vanadium nitride-like structured and crystallizes in the monoclinic C2/c space group. The structure is three-dimensional. Ti4+ is bonded to six equivalent O2- atoms to form a mixture of distorted corner and edge-sharing TiO6 octahedra. The corner-sharing octahedral tilt angles are 23°. There are a spread of Ti–O bond distances ranging from 1.93–2.00 Å. O2- is bonded in a distorted T-shaped geometry to three equivalent Ti4+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on TiO2 by Materials Project

TiO2 is beta Vanadium nitride-like structured and crystallizes in the tetragonal I4_1/amd space group. The structure is three-dimensional. Ti4+ is bonded to six equivalent O2- atoms to form a mixture of distorted edge and corner-sharing TiO6 octahedra. The corner-sharing octahedral tilt angles are 25°. There is four shorter (1.95 Å) and two longer (2.01 Å) Ti–O bond length. O2- is bonded in a distorted T-shaped geometry to three equivalent Ti4+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on TiO2 by Materials Project

TiO2 is Baddeleyite structured and crystallizes in the monoclinic P2_1/c space group. The structure is three-dimensional. Ti4+ is bonded to seven O2- atoms to form a mixture of distorted edge and corner-sharing TiO7 pentagonal bipyramids. There are a spread of Ti–O bond distances ranging from 1.88–2.26 Å. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded in a 3-coordinate geometry to three equivalent Ti4+ atoms. In the second O2- site, O2- is bonded to four equivalent Ti4+ atoms to form a mixture of distorted edge and corner-sharing OTi4 tetrahedra.

36 MATERIALS SCIENCE↗

Materials Data on TiO2 by Materials Project

TiO2 is quartz (alpha) structured and crystallizes in the trigonal P3_121 space group. The structure is three-dimensional. Ti4+ is bonded to four equivalent O2- atoms to form corner-sharing TiO4 tetrahedra. All Ti–O bond lengths are 1.83 Å. O2- is bonded in a bent 150 degrees geometry to two equivalent Ti4+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on TiO2 by Materials Project

TiO2 crystallizes in the monoclinic C2/m space group. The structure is three-dimensional. there are two inequivalent Ti4+ sites. In the first Ti4+ site, Ti4+ is bonded in a 6-coordinate geometry to six O2- atoms. There are a spread of Ti–O bond distances ranging from 1.78–2.34 Å. In the second Ti4+ site, Ti4+ is bonded to six O2- atoms to form a mixture of distorted edge and corner-sharing TiO6 octahedra. The corner-sharing octahedral tilt angles are 28°. There are a spread of Ti–O bond distances ranging from 1.86–2.16 Å. There are four inequivalent O2- sites. In the first O2- site, O2- is bonded in a 3-coordinate geometry to three Ti4+ atoms. In the second O2- site, O2- is bonded in a distorted T-shaped geometry to three Ti4+ atoms. In the third O2- site, O2- is bonded in a linear geometry to two Ti4+ atoms. In the fourth O2- site, O2- is bonded to four Ti4+ atoms to form a mixture of distorted edge and corner-sharing OTi4 trigonal pyramids.

36 MATERIALS SCIENCE↗

Materials Data on TiO2 by Materials Project

TiO2 crystallizes in the orthorhombic P2_12_12_1 space group. The structure is three-dimensional. Ti4+ is bonded to five O2- atoms to form a mixture of distorted edge and corner-sharing TiO5 trigonal bipyramids. There are a spread of Ti–O bond distances ranging from 1.78–2.05 Å. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted trigonal non-coplanar geometry to three equivalent Ti4+ atoms. In the second O2- site, O2- is bonded in a bent 150 degrees geometry to two equivalent Ti4+ atoms.

36 MATERIALS SCIENCE↗