Search NASA⌕ Search

SEARCH · Search NASA

Results for “Torsion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Dynamic Characteristics of Multistory Buildings

In order to evaluate unit stresses or to estimate possible damage in multistory buildings from earthquake or ground motion from underground nuclear explosion it is essential to determine how much of the dynamic response at any level is due to various types of freedom. The effects of shear deformation between floors, joint rotation, over-all flexure, and ground compliance are considered. Joint rotation and over-all flexure are evaluated over a wide range of building characteristics with simply determined indices. Further, a period synthesis concept and a pseudo-stiffness procedure are proposed to enable the determination of periods, mode shapes and stiffnesses with consideration of joint rotation, over-all flexure and ground compliance while performing simple labor-saving analyses for assumed rigid-floor shear buildings. The first three modes of vibration are considered in elastic free vibration. The buildings and models are symmetric in plan without torsional coupling.

42 ENGINEERING↗
DOE OSTI2020

An in situ shearing x-ray measurement system for exploring structures and dynamics at the solid–liquid interface

Revealing interfacial structure and dynamics has been one of the essential thematic topics in material science and condensed matter physics. Synchrotron-based x-ray scattering techniques can deliver unique and insightful probing of interfacial structures and dynamics, in particular, in reflection geometries with higher surface and interfacial sensitivity than transmission geometries. We demonstrate the design and implementation of an in situ shearing x-ray measurement system, equipped with both inline parallel-plate and cone-and-plate shearing setups and operated at the advanced photon source at Argonne National Laboratory, to investigate the structures and dynamics of end-tethered polymers at the solid-liquid interface. With a precise lifting motor, a micrometer-scale gap can be produced by aligning two surfaces of a rotating upper shaft and a lower sample substrate. A torsional shear flow forms in the gap and applies tangential shear forces on the sample surface. The technical combination with nanoscale rheology and the utilization of in situ x-ray scattering allow us to gain fundamental insights into the complex dynamics in soft interfaces under shearing. In this work, we demonstrate the technical scope and experimental capability of the in situ shearing x-ray system through the measurements of charged polymers at both flat and curved interfaces upon shearing. Furthermore, through the in situ shearing x-ray scattering experiments integrated with theoretical simulations, we aim to develop a detailed understanding of the short-range molecular structure and mesoscale ionic aggregate morphology, as well as ion transport and dynamics in soft interfaces, thereby providing fundamental insight into a long-standing challenge in ionic polymer brushes with a significant technological impact.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Experimental and theoretical studies of the doubly substituted methyl-ethyl Criegee intermediate: Infrared action spectroscopy and unimolecular decay to OH radical products

In this work the infrared (IR) action spectrum of the doubly substituted methyl-ethyl Criegee intermediate (MECI) is observed in the CH stretch overtone region with detection of OH products. The MECI exhibits four conformers, all of which undergo unimolecular decay via a 1,4 H-atom transfer mechanism, followed by the rapid release of OH products. Conformers with different orientations of the carbonyl oxide group with respect to the methyl and ethyl substituents (i.e., anti and syn ) decay via distinct transition state barriers (16.1 kcal mol –1 and 15.4 kcal mol –1 , respectively). The observed IR action spectrum is in good agreement with the predicted anharmonic IR absorption spectrum, but exhibits significant congestion, which is attributed to couplings between spectroscopic bright states and nearby dark states. Energy-dependent OH appearance rates are measured upon IR excitation of the strongest features in the IR action spectrum and are found to be on the order of 10 6 –10 7 s –1 . The experimental rates are in good agreement with computed Rice–Ramsperger–Kassel–Marcus rates for the unimolecular decay of MECI at these energies, which incorporate quantum mechanical tunneling and sophisticated hindered rotor treatments, as well as high-level theoretical calculations of the TS barrier heights, rovibrational properties, and torsional barriers associated with the MECI conformers. Master equation modeling is used to predict thermal rates for the unimolecular decay of anti - and syn -MECI of 473 s –1 and 660 s –1 , respectively. Comparison with other previously studied Criegee intermediate systems provides insights into substituent effects on unimolecular decay under both energy-dependent and thermal conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

The effect of entrance flow development on vortex formation and wall shear stress in a curved artery model

In this work, we numerically investigate the effect of entrance condition on the spatial and temporal evolution of multiple three-dimensional vortex pairs and the wall shear stress distribution in a curved artery model. We perform this study using a Newtonian blood-analog fluid subjected to a pulsatile flow with two inflow conditions. The first flow condition is fully developed while the second condition is undeveloped (i.e., uniform). We discuss the connection along the axial direction between regions of organized vorticity observed at various cross sections of the model and compare results between the different entrance conditions. We model a human artery with a simple, rigid 180° curved pipe with a circular cross section and constant curvature, neglecting the effects of taper, torsion, and elasticity. Numerical results are computed from a discontinuous high-order spectral element flow solver. The flow rate used in this study is physiological. We observe differences in secondary flow patterns, especially during the deceleration phase of the physiological waveform where multiple vortical structures of both Dean-type and Lyne-type coexist. The results indicate that decreased axial velocities under an undeveloped condition produce smaller secondary flows that ultimately inhibit growth of any interior flow vortices. We highlight the effect of the entrance condition on the formation of these structures and subsequent appearance of abnormal inner wall shear stresses, which suggest there may be a lower prevalence of cardiovascular disease in curved arteries where the flow is rather undeveloped—a potentially physiologically significant result to help understand the influence of blood flow development on disease.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Infrared spectroscopic signature of a hydroperoxyalkyl radical (•QOOH)

Infrared (IR) action spectroscopy is utilized to characterize a prototypical carbon-centered hydroperoxyalkyl radical (•QOOH) transiently formed in the oxidation of volatile organic compounds. The •QOOH radical formed in isobutane oxidation, 2-hydroperoxy-2-methylprop-1-yl, •CH 2 (CH 3 ) 2 COOH, is generated in the laboratory by H-atom abstraction from tert-butyl hydroperoxide (TBHP). IR spectral features of jet-cooled and stabilized •QOOH radicals are observed from 2950 to 7050 cm –1 at energies that lie below and above the transition state barrier leading to OH radical and cyclic ether products. The observed •QOOH features include overtone OH and CH stretch transitions, combination bands involving OH or CH stretch and a lower frequency mode, and fundamental OH and CH stretch transitions. Most features arise from a single vibrational transition with band contours well simulated at a rotational temperature of 10 K. In each case, the OH products resulting from unimolecular decay of vibrationally activated •QOOH are detected by UV laser-induced fluorescence. Assignments of observed •QOOH IR transitions are guided by anharmonic frequencies computed using second order vibrational perturbation theory, a 2 + 1 model that focuses on the coupling of the OH stretch with two low-frequency torsions, as well as recently predicted statistical •QOOH unimolecular decay rates that include heavy-atom tunneling. Most of the observed vibrational transitions of •QOOH are readily distinguished from those of the TBHP precursor. Furthermore, the distinctive IR transitions of •QOOH, including the strong fundamental OH stretch, provide a general means for detection of •QOOH under controlled laboratory and real-world conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A static quantum embedding scheme based on coupled cluster theory

Here, we develop a static quantum embedding scheme that utilizes different levels of approximations to coupled cluster (CC) theory for an active fragment region and its environment. To reduce the computational cost, we solve the local fragment problem using a high-level CC method and address the environment problem with a lower-level Møller–Plesset (MP) perturbative method. This embedding approach inherits many conceptual developments from the hybrid second-order Møller–Plesset (MP2) and CC works by Nooijen [J. Chem. Phys. 111, 10815 (1999)] and Bochevarov and Sherrill [J. Chem. Phys. 122, 234110 (2005)]. We go beyond those works here by primarily targeting a specific localized fragment of a molecule and also introducing an alternative mechanism to relax the environment within this framework. We will call this approach MP-CC. We demonstrate the effectiveness of MP-CC on several potential energy curves and a set of thermochemical reaction energies, using CC with singles and doubles as the fragment solver, and MP2-like treatments of the environment. The results are substantially improved by the inclusion of orbital relaxation in the environment. Using localized bonds as the active fragment, we also report results for N=N bond breaking in azomethane and for the central C–C bond torsion in butadiene. We find that when the fragment Hilbert space size remains fixed (e.g., when determined by an intrinsic atomic orbital approach), the method achieves comparable accuracy with both a small and a large basis set. Additionally, our results indicate that increasing the fragment Hilbert space size systematically enhances the accuracy of observables, approaching the precision of the full CC solver.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A comparison of probabilistic generative frameworks for molecular simulations

Generative artificial intelligence is now a widely used tool in molecular science. Despite the popularity of probabilistic generative models, numerical experiments benchmarking their performance on molecular data are lacking. Here, in this work, we introduce and explain several classes of generative models, broadly sorted into two categories: flow-based models and diffusion models. We select three representative models: neural spline flows, conditional flow matching, and denoising diffusion probabilistic models, and examine their accuracy, computational cost, and generation speed across datasets with tunable dimensionality, complexity, and modal asymmetry. Our findings are varied, with no one framework being the best for all purposes. In a nutshell, (i) neural spline flows do best at capturing mode asymmetry present in low-dimensional data, (ii) conditional flow matching outperforms other models for high-dimensional data with low complexity, and (iii) denoising diffusion probabilistic models appear the best for low-dimensional data with high complexity. Our datasets include a Gaussian mixture model and the dihedral torsion angle distribution of the Aib9 peptide, generated via a molecular dynamics simulation. We hope our taxonomy of probabilistic generative frameworks and numerical results may guide model selection for a wide range of molecular tasks.

Artificial intelligence↗
DOE OSTI2026

Transient hydroperoxyalkyl intermediates (•QOOH) in isopentane oxidation. II. Isomer-resolved unimolecular dynamics

Transient carbon-centered hydroperoxyalkyl intermediates (•QOOH) in isopentane oxidation are characterized by their time- and energy-resolved unimolecular dissociation dynamics to hydroxyl (OH) and cyclic ether products. Two distinct •QOOH isomers are examined with radical sites at a primary carbon of one of the methyl groups (β-Me) or a secondary carbon (β-Et) of the ethyl group. Energy-dependent unimolecular rates are obtained from the time-dependent appearance of OH products for the two isomers and compared with statistical microcanonical rates computed using RRKM theory, including heavy-atom tunneling, based on high-level theoretical calculations. A benchmark-corrected approach is utilized to compute high-accuracy stationary-point energies, most importantly, transition-state barriers, for the •QOOH_Me and •QOOH_Et isomers in isopentane oxidation, building on higher-level reference calculations for the oxidation of ethane (C 2 H 5 O 2 ) and propane (C 3 H 7 O 2 ), respectively. Here, the measured rates are compared with RRKM calculations incorporating the benchmark-corrected transition-state parameters, a vibrationally adiabatic multidimensional hindered-rotor treatment of key torsions, and quantum tunneling. Agreement between experiment and theory validates the statistical description and shows faster decay for •QOOH_Et due to its lower barrier. Both β-QOOH isomers decay almost exclusively to OH + cyclic ether products under the conditions studied.

Oxidation processes↗
DOE OSTI2020

Cas9 interrogates DNA in discrete steps modulated by mismatches and supercoiling

The CRISPR-Cas9 nuclease has been widely repurposed as a molecular and cell biology tool for its ability to programmably target and cleave DNA. Cas9 recognizes its target site by unwinding the DNA double helix and hybridizing a 20-nucleotide section of its associated guide RNA to one DNA strand, forming an R-loop structure. A dynamic and mechanical description of R-loop formation is needed to understand the biophysics of target searching and develop rational approaches for mitigating off-target activity while accounting for the influence of torsional strain in the genome. Here we investigate the dynamics of Cas9 R-loop formation and collapse using rotor bead tracking (RBT), a single-molecule technique that can simultaneously monitor DNA unwinding with base-pair resolution and binding of fluorescently labeled macromolecules in real time. By measuring changes in torque upon unwinding of the double helix, we find that R-loop formation and collapse proceed via a transient discrete intermediate, consistent with DNA:RNA hybridization within an initial seed region. Using systematic measurements of target and off-target sequences under controlled mechanical perturbations, we characterize position-dependent effects of sequence mismatches and show how DNA supercoiling modulates the energy landscape of R-loop formation and dictates access to states competent for stable binding and cleavage. Consistent with this energy landscape model, in bulk experiments we observe promiscuous cleavage under physiological negative supercoiling. The detailed description of DNA interrogation presented here suggests strategies for improving the specificity and kinetics of Cas9 as a genome engineering tool and may inspire expanded applications that exploit sensitivity to DNA supercoiling.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Deterministic fabrication of graphene hexagonal boron nitride moiré superlattices

The electronic properties of moiré heterostructures depend sensitively on the relative orientation between layers of the stack. For example, near-magic-angle twisted bilayer graphene (TBG) commonly shows superconductivity, yet a TBG sample with one of the graphene layers rotationally aligned to a hexagonal Boron Nitride (hBN) cladding layer provided experimental observation of orbital ferromagnetism. To create samples with aligned graphene/hBN, researchers often align edges of exfoliated flakes that appear straight in optical micrographs. However, graphene or hBN can cleave along either zig-zag or armchair lattice directions, introducing a 30° ambiguity in the relative orientation of two flakes. By characterizing the crystal lattice orientation of exfoliated flakes prior to stacking using Raman and second-harmonic generation for graphene and hBN, respectively, we unambiguously align monolayer graphene to hBN at a near-0°, not 30°, relative twist angle. We confirm this alignment by torsional force microscopy of the graphene/hBN moiré on an open-face stack, and then by cryogenic transport measurements, after full encapsulation with a second, nonaligned hBN layer. This work demonstrates a key step toward systematically exploring the effects of the relative twist angle between dissimilar materials within moiré heterostructures.

boron nitride↗
DOE OSTI2021

Ultralight dark matter detection with mechanical quantum sensors

Abstract We consider the use of quantum-limited mechanical force sensors to detect ultralight (sub-meV) dark matter (DM) candidates which are weakly coupled to the standard model. We show that mechanical sensors with masses around or below the milligram scale, operating around the standard quantum limit, would enable novel searches for DM with natural frequencies around the kHz scale. This would complement existing strategies based on torsion balances, atom interferometers, and atomic clock systems.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Solitary wave solutions of the 2+1 and 3+1 dimensional nonlinear Dirac equation constrained to planar and space curves

Here, we study the effect of curvature and torsion on the solitons of the nonlinear Dirac equation considered on planar and space curves. Since the spin connection is zero for the curves considered here, the arc variable provides a natural setting to understand the role of curvature. We obtain for various curves in two and three dimensions the transformation of the Dirac equation to the 1 + 1 dimensional flat space Dirac equation written in terms of the arc length. Depending on the curvature, the soliton profile either narrows or expands. Our results may be applicable to yet-to-be-synthesized curved quasi-one dimensional Bose condensates.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Aeroservoelastic Stability of a Floating Wind Turbine

The problem of negative damping undermines the aeroservoelastic stability of floating offshore wind turbines. The negative damping problem is most prevalent around rated wind speed, where the sensitivity of thrust to wind speed is the largest. This paper investigates the implementation of peak shaving, a controller feature that limits the rated thrust by pitching the blades before rated wind speed is reached. Two controller designs are investigated: a de-tuned controller and a nacelle-feedback controller. A time-domain metric is defined, inspired by Lyapunov theory, in order to compute and assess the stability of floating offshore wind turbines. The model of the International Energy Agency 15-MW reference wind turbine mounted on the University of Maine VolturnUS-S floater is simulated in HAWC2 with the National Renewable Energy Laboratory reference open-source controller. Peak shaving is applied to the two controller designs and stability is assessed. According to the chosen metric, peak shaving does not improve the stability of the system. This is due to the trade-off between loads and error tracking: although the loads and displacements in the fore-aft direction of the turbine are reduced, the rotor-speed tracking is poorer, which increases the shaft torsion fatigue load.

17 WIND ENERGY↗
DOE OSTI2023

Open Source High Fidelity Modeling of a Type-5 Wind Turbine Drivetrain

The increasing integration of renewable energy resources in evolving bulk power system (BPS) is impacting the system inertia. Type-5 wind turbine generation has the potential to behave like a traditional synchronous generator and can help mitigate the impact on system inertia. A hydraulic torque converter (TC) and gearbox with torque limiting feature are integral parts of a Type-5 wind turbine unit. A high fidelity model of Type-5 wind turbine drivetrain is not openly and widely available for grid integration and transient stability studies. This hinders appropriate assessment of Type-5 wind power plant’s contribution to bulk grid resilience. This work develops and validates a TC model based on those generally used in automobile’s transmission system. Moreover, the concept of torsional coupling is leveraged to integrate the TC and gearbox system dynamics. The entire integrated model will be open sourced and publicly available for grid integration studies.

17 WIND ENERGY↗
DOE OSTI2023

Atomic protein structure refinement using all-atom graph representations and SE(3)-equivariant graph transformer

Abstract Motivation The state-of-art protein structure prediction methods such as AlphaFold are being widely used to predict structures of uncharacterized proteins in biomedical research. There is a significant need to further improve the quality and nativeness of the predicted structures to enhance their usability. In this work, we develop ATOMRefine, a deep learning-based, end-to-end, all-atom protein structural model refinement method. It uses a SE(3)-equivariant graph transformer network to directly refine protein atomic coordinates in a predicted tertiary structure represented as a molecular graph. Results The method is first trained and tested on the structural models in AlphaFoldDB whose experimental structures are known, and then blindly tested on 69 CASP14 regular targets and 7 CASP14 refinement targets. ATOMRefine improves the quality of both backbone atoms and all-atom conformation of the initial structural models generated by AlphaFold. It also performs better than two state-of-the-art refinement methods in multiple evaluation metrics including an all-atom model quality score—the MolProbity score based on the analysis of all-atom contacts, bond length, atom clashes, torsion angles, and side-chain rotamers. As ATOMRefine can refine a protein structure quickly, it provides a viable, fast solution for improving protein geometry and fixing structural errors of predicted structures through direct coordinate refinement. Availability and implementation The source code of ATOMRefine is available in the GitHub repository (https://github.com/BioinfoMachineLearning/ATOMRefine). All the required data for training and testing are available at https://doi.org/10.5281/zenodo.6944368.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Cryo neutron crystallography demonstrates influence of RNA 2'-OH orientation on conformation, sugar pucker and water structure

The ribose 2'-hydroxyl is the key chemical difference between RNA and DNA and primary source of their divergent structural and functional characteristics. Macromolecular X-ray diffraction experiments typically do not reveal the positions of hydrogen atoms. Thus, standard crystallography cannot determine 2'-OH orientation (H2'-C2'-O2'-HO2' torsion angle) and its potential roles in sculpting the RNA backbone and the expansive fold space. Here, we report the first neutron crystal structure of an RNA, the Escherichia coli rRNA Sarcin-Ricin Loop (SRL). 2'-OD orientations were established for all 27 residues and revealed O-D bonds pointing toward backbone (O3', 13 observations), nucleobase (11) or sugar (3). Most riboses in the SRL stem region show a 2'-OD backbone-orientation. GAGA-tetraloop riboses display a 2'-OD base-orientation. An atypical C2'-endo sugar pucker is strictly correlated with a 2'-OD sugar-orientation. Neutrons reveal the strong preference of the 2'-OH to donate in H-bonds and that 2'-OH orientation affects both backbone geometry and ribose pucker. We discuss 2'-OH and water molecule orientations in the SRL neutron structure and compare with results from a solution phase 10 μs MD simulation. We demonstrate that joint cryo-neutron/X-ray crystallography offers an all-in-one approach to determine the complete structural properties of RNA, i.e. geometry, conformation, protonation state and hydration structure.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Swampland cobordism conjecture and non-Abelian duality groups

We study the cobordism conjecture of McNamara and Vafa which asserts that the bordism group of quantum gravity is trivial. In the context of type IIB string theory compactified on a circle, this predicts the presence of D7-branes. On the other hand, the non-Abelian structure of the IIB duality group SL (2, Z) implies the existence of additional [p, q] 7-branes. We find that this additional information is instead captured by the space of closed paths on the moduli space of elliptic curves parameterizing distinct values of the type IIB axio-dilaton. This description allows to recover the full structure of non-Abelian braid statistics for 7-branes. Combining the cobordism conjecture with an earlier Swampland conjecture by Ooguri and Vafa, we argue that only certain congruence subgroups $\Gamma\subset$ SL(2, Z) specifying genus zero modular curves can appear in 8D F-theory vacua. This leads to a successful prediction for the allowed Mordell–Weil torsion groups for 8D F-theory vacua.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Searches for beyond-Riemann gravity

Many effective field theories describing gravity cannot arise from an underlying theory based on Riemann geometry or its extensions to include torsion and nonmetricity but may instead emerge from another geometry or may have a nongeometric basis. The Lagrange density for a broad class of such theories is investigated. The action for fermions coupled to gravity is linearized about a Minkowski background and is found to include terms describing small deviations from Lorentz invariance and gravitational gauge invariance. The corresponding nonrelativistic hamiltonian is derived at second order in the fermion momentum. The implications for laboratory experiments and astrophysical observations with fermions are studied, with primary focus on anomalous spin-gravity couplings. First constraints on some coefficients are extracted from existing data obtained via measurements at different potentials, comparisons of gravitational accelerations, interferometric methods, and investigations of gravitational bound states. As a result, some prospects for future experimental studies are discussed.

79 ASTRONOMY AND ASTROPHYSICS↗