SEARCH · Search NASA

Results for “Transonic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

All sources NASA NTRS DOE OSTI

NASA NTRS1974

Some tunnel-wall effects on transonic flutter

Significant effects of wind-tunnel walls were observed on the transonic flutter boundaries of wall-mounted models during two flutter model research studies. In these studies, flutter experiments with cantilevered SST-type wing models were conducted in three different wind tunnels. The experimental results are compared to flutter boundaries calculated for the models in free air. The results indicate that transonic flutter boundaries can be affected by tunnel-wall interference, tunnel resonances, and shock-wave reflections, and that flutter model data accuracy is a function of model/tunnel size and tunnel wall porosity. However, models within the recommended size limits should give accurate results in transonic tunnels with normal ventilation. A flutter trend analysis for a two-dimensional wing-demonstrating tunnel wall and resonance effects on flutter are also presented.

Ruhlin, C. L.↗

NASA NTRS1975

Numerical calculation of transonic boattail flow

A viscid-inviscid interaction procedure for the calculation of subsonic and transonic flow over a boattail was developed. This method couples a finite-difference inviscid analysis with an integral boundary-layer technique. Results indicate that the effect of the boundary layer is as important as an accurate inviscid method for this type of flow. Theoretical results from the solution of the full transonic-potential equation, including boundary layer effects, agree well with the experimental pressure distribution for a boattail. Use of the small disturbance transonic potential equation yielded results that did not agree well with the experimental results even when boundary-layer effects were included in the calculations.

Chow, W. L.↗

NASA NTRS1976

Airfoil section drag reduction at transonic speeds by numerical optimization

A practical procedure for the design of low drag, transonic airfoils is demonstrated. The procedure uses an optimization program, based on a gradient algorithm coupled with an aerodynamic analysis program, that solves the full, non-linear potential equation for transonic flow. The procedure is useful for the design of retrofit modifications for drag reduction of existing aircraft as well as for the design of low drag profiles for new aircraft. Results are presented for the modification of four different airfoils to decrease the drag at a given transonic Mach number.

Hicks, R. M.↗

NASA NTRS1976

Airfoil section drag reduction at transonic speeds by numerical optimization

Hicks, R. M.↗

NASA NTRS1976

Toward the correctable-interference transonic wind tunnel

The concept of a correctable-interference transonic wind tunnel combining a capability for wall-interference assessment with a limited capability for wall control is introduced. Recent progress toward achieving the interference assessment capability is described. The feasibility of using experimentally measured data directly as boundary values for the assessment in lieu of more generally formulated but less accurate wall boundary conditions is demonstrated for two-dimensional subsonic flows. Also, a procedure for transonic analysis of wall interference which leads to a rational definition of the wall-induced perturbation field within the context of nonlinear transonic flow computations is outlined in principle.

Kemp, W. B., Jr.↗

NASA NTRS1976

The characteristics of the planned National Transonic Facility

The National Transonic Facility is a high Reynolds number transonic wind tunnel designed to satisfy the research and development needs of NASA, DOD, and industry. The facility design incorporates the cryogenic approach to achieving high Reynolds numbers with manageable model loads. By using temperature as a test variable, a unique capability to clearly separate aeroelastic, Reynolds number, and Mach number effects will be possible. This capability will open new horizons in transonic aerodynamic research. The tunnel design including unique features and operating envelopes is described. A brief overview of the general operating arrangement and the schedule for facility construction is presented.

Mckinney, L. W.↗

NASA NTRS1976

Design features and operational characteristics of the Langley 0.3-meter transonic cryogenic tunnel

Experience with the Langley 0.3 meter transonic cryogenic tunnel, which is fan driven, indicated that such a tunnel presents no unusual design difficulties and is simple to operate. Purging, cooldown, and warmup times were acceptable and were predicted with good accuracy. Cooling with liquid nitrogen was practical over a wide range of operating conditions at power levels required for transonic testing, and good temperature distributions were obtained by using a simple liquid nitrogen injection system. To take full advantage of the unique Reynolds number capabilities of the 0.3 meter transonic tunnel, it was designed to accommodate test sections other than the original, octagonal, three dimensional test section. A 20- by 60-cm two dimensional test section was recently installed and is being calibrated. A two dimensional test section with self-streamlining walls and a test section incorporating a magnetic suspension and balance system are being considered.

Kilgore, R. A.↗

NASA NTRS1977

Study of design and analysis methods for transonic flow

An airfoil design program and a boundary layer analysis were developed. Boundary conditions were derived for ventilated transonic wind tunnels and performing transonic windtunnel wall calculations. A computational procedure for rotational transonic flow in engine inlet throats was formulated. Results and conclusions are summarized.

Murman, E. M.↗

NASA NTRS1976

Computation of wave drag for transonic flow

The paper develops a method for calculating wave drag for two-dimensional transonic flow, with particular application to the prediction of the drag rise Mach number of a supercritical wing section. The method is based on a transonic similarity model which is defined by a normalized small perturbation equation and represents shock waves by the addition of an artificial viscosity term in the region of supersonic flow to the partial differential equation. The drag formula obtained allows the computer simulation of transonic wind tunnel data taking account of boundary layer and wall effects.

Garabedian, P. R.↗

NASA NTRS1977

Computation of transonic boattail flow with separation

The relaxation procedure of South and Jameson for the full potential transonic flow equation was coupled to a modified Reshotko-Tucker integral boundary-layer technique with an empirical model for separated flow. The viscous and inviscid flows were solved iteratively until convergence was obtained. This iterative method was then applied to the subsonic and transonic flow over a series of axisymmetric circular-arc boattails with solid jet plume simulators. Comparisons of theoretical and experimental surface pressures and boattail drag are presented over a free-stream Mach numbers below 0.90. The qualitative variation of boattail drag with free-stream Mach number and boattail angle well into the region of transonic drag rise was correctly predicted; however, the absolute drag levels were significantly underpredicted. For separated flows, the empirical discriminating streamline model gives good results up to a free-stream Mach number of about 0.90 and allows reasonable predictions for shock-induced separation if the proper separation location and separation turning angle are known.

Wilmoth, R. G.↗

NASA NTRS1978

Perturbation solutions for transonic flow on the blade-to-blade surface of compressor blade rows

A preliminary investigation was conducted to establish the theoretical basis of perturbation techniques with the objective of minimizing computational requirements associated with parametric studies of transonic flows in turbomachines. The theoretical analysis involved the development of perturbation methods for determining first order changes in the flow solution due to variations of one or more geometrical or flow parameters. The formulation is primarily directed toward transonic flows on the blade to blade surface of a single blade row compressor. Two different perturbation approaches were identified and studied. Applications and results of these methods for various perturbations are presented for selected two dimensional transonic cascade flows to illustrate the advantages and disadvantages of each technique. Additionally, it was found that, for flows with shock waves, proper account of shock displacement was crucial.

Stahara, S. S.↗

NASA NTRS1978

Two-dimensional transonic testing with splitter plates

The use of splitter plates for two dimensional transonic testing in wind tunnels was investigated on a 12% biconvex airfoil section over the Mach number range 0.6 to 1.0. Measured pressure distributions were compared to transonic theory and to other experiments, including an investigation in the same facility without splitter plates. The results of the experiment show the best agreement with theory over the entire transonic Mach number range.

Davis, S.↗

NASA NTRS1978

Numerical design of streamlined tunnel walls for a two-dimensional transonic test

An analytical procedure is discussed for designing wall shapes for streamlined, nonporous, two-dimensional, transonic wind tunnels. It is based upon currently available 2-D inviscid transonic and boundary layer analysis computer programs. Predicted wall shapes are compared with experimental data obtained from the NASA Langley 6 by 19 inch Transonic Tunnel where the slotted walls were replaced by flexible nonporous walls. Comparisons are presented for the empty tunnel operating at a Mach number of 0.9 and for a supercritical test of an NACA 0012 airfoil at zero lift. Satisfactory agreement is obtained between the analytically and experimentally determined wall shapes.

Newman, P. A.↗

NASA NTRS1978

Wing analysis using a transonic potential flow computational method

The ability of the method to compute wing transonic performance was determined by comparing computed results with both experimental data and results computed by other theoretical procedures. Both pressure distributions and aerodynamic forces were evaluated. Comparisons indicated that the method is a significant improvement in transonic wing analysis capability. In particular, the computational method generally calculated the correct development of three-dimensional pressure distributions from subcritical to transonic conditions. Complicated, multiple shocked flows observed experimentally were reproduced computationally. The ability to identify the effects of design modifications was demonstrated both in terms of pressure distributions and shock drag characteristics.

Henne, P. A.↗

NASA NTRS1977

Application of a multi-level grid method to transonic flow calculations

A multi-level grid method has been studied as a possible means of accelerating convergence in relaxation calculations for transonic flows. The method employs a hierarchy of grids, ranging from very coarse (e.g., 8 x 2 mesh cells) to fine (e.g., 128 x 32); the coarser grids are used to diminish the magnitude of the smooth part of the residuals, hopefully with far less total work than would be required with, say, optimal SLOR iterations on the finest grid. The method was applied to the solution of the transonic small-disturbance equation for the velocity potential in the conservation form. Nonlifting transonic flow past a parabolic-arc airfoil is the example studied, with meshes of both constant and variable step size.

South, J. C., Jr.↗

NASA NTRS1978

Transonic wing analysis using advanced computational methods

This paper discusses the application of three-dimensional computational transonic flow methods to several different types of transport wing designs. The purpose of these applications is to evaluate the basic accuracy and limitations associated with such numerical methods. The use of such computational methods for practical engineering problems can only be justified after favorable evaluations are completed. The paper summarizes a study of both the small-disturbance and the full potential technique for computing three-dimensional transonic flows. Computed three-dimensional results are compared to both experimental measurements and theoretical results. Comparisons are made not only of pressure distributions but also of lift and drag forces. Transonic drag rise characteristics are compared. Three-dimensional pressure distributions and aerodynamic forces, computed from the full potential solution, compare reasonably well with experimental results for a wide range of configurations and flow conditions.

Henne, P. A.↗

NASA NTRS1978

The shock tube as a device for testing transonic airfoils at high Reynolds numbers

A performance analysis of gas-driven shock tubes shows that transonic airfoil flows with chord Reynolds numbers in the range of 100 million can be generated behind the primary shock in a large shock tube. A study of flow over simple airfoils has been carried out at low and intermediate Reynolds numbers to assess the testing technique. Results obtained from schlieren photos and airfoil pressure measurements show that steady transonic flows similar to those observed for the airfoils in wind tunnels can be generated within the available testing time in a shock tube with either properly-contoured test section walls or a properly-designed slotted-wall test section. The study indicates that the shock tube is a useful facility for studying two-dimensional high Reynolds number transonic airfoil flows.

Cook, W. J.↗

NASA NTRS1978

Design and physical characteristics of the Transonic Aircraft Technology (TACT) research aircraft

The Transonic Aircraft Technology (TACT) research program provided data necessary to verify aerodynamic concepts, such as the supercritical wing, and to gain the confidence required for the application of such technology to advanced high performance aircraft. An F-111A aircraft was employed as the flight test bed to provide full scale data. The data were correlated extensively with predictions based on data obtained from wind tunnel tests. An assessment of the improvement afforded at transonic speeds in drag divergence, maneuvering performance, and airplane handling qualities by the use of the supercritical wing was included in the program. Transonic flight and wind tunnel testing techniques were investigated, and specific research technologies evaluated were also summarized.

Painter, W. D.↗