Search NASA⌕ Search

SEARCH · Search NASA

Results for “USGS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

Training site statistics from Landsat and Seasat satellite imagery registered to a common map base

Landsat and Seasat satellite imagery and training site boundary coordinates were registered to a common Universal Transverse Mercator map base in the Newport Beach area of Orange County, California. The purpose was to establish a spatially-registered, multi-sensor data base which would test the use of Seasat synthetic aperture radar imagery to improve spectral separability of channels used for land use classification of an urban area. Digital image processing techniques originally developed for the digital mosaics of the California Desert and the State of Arizona were adapted to spatially register multispectral and radar data. Techniques included control point selection from imagery and USGS topographic quadrangle maps, control point cataloguing with the Image Based Information System, and spatial and spectral rectifications of the imagery. The radar imagery was pre-processed to reduce its tendency toward uniform data distributions, so that training site statistics for selected Landsat and pre-processed Seasat imagery indicated good spectral separation between channels.

Clark, J.↗

Remote sensing aided procedure for conifer growth modeling in the northeastern Sierra Nevada

The objective of this study was to use remotely-sensed data with ground-acquired data for preparing inputs to a mathematical model for generation of a potential conifer growth map of a wildland area. The study area, jointly selected by the resource managers of the U.S. Forest Service at the Plumas National Forest and researchers, covers approximately 500 sq km in the northeastern scrapment of Sierra Nevada. The approach involved a computerized databank based on both remotely-sensed and ground-acquired data. The remotely-sensed data included Landsat Multispectral Scanner (MSS) data, NOAA-5 Very High Resolution Radiometer (VHRR) data and U-2 Color infrared photography. The ground data included U.S. Geological Survey (USGS) topographic maps, Defense Mapping Agency (DMA)/USGS digital terrain data, soil maps, and vegetation data. The results included a series of maps for the final product as well as the intermediate products. The intermediate products were potential evapotranspiration, aspect, and soil plant available water.

Smith, H. G.↗

Landsat - What is operational in water resources

Applications of Landsat data in hydrology and water quality measurement were examined to determine which applications are operational. In hydrology, the principal applications have been surface water inventory, and land cover analysis for (1) runoff modeling and (2) abatement planning for non-point pollution and erosion. In water quality measurement, the principal applications have been: (1) trophic state assessment, and (2) measurement of turbidity and suspended sediment. The following applications were found to be operational: mapping of surface water, snow cover, and land cover (USGS Level 1) for watershed applications; measurement of turbidity, Secchi disk depth, suspended sediment concentration, and water depth.

Middleton, E. M.↗

Use of LANDSAT data to define soil boundaries in Carroll County, Missouri

Bands 4, 5 and 7 false color composite photographs were prepared using data from LANDSAT scenes acquired during April 1977 and April 1981 on computer compatible tapes, and these color composites were compared with band 7 black and white photographs prepared for the entire county. Delineations of soil boundaries at the soil association level were achieved using LANDSAT spectral reflectance data and slope maps for a portion of Carroll County, Missouri. Forty two spectral reflectance classes from April 1977 LANDSAT data were overlaid on digitized slope maps of nine USGS 7.5 minute series topographic quadrangle slope maps to achieve boundary delineations of the soil associations.

Davidson, S. E.↗

Statistical tests of ARIES data

Statistical tests are performed on Project ARIES preliminary baseline measurements in the Southern California triangle formed by the Jet Propulsion Laboratory, the Owens Valley Radio Observatory, and the Goldstone tracking complex during 1976-1980. In addition to conventional one-dimensional tests a two-dimensional test which allows for an arbitrary correlation between errors in individual components is formulated using the Hotelling statistic. On two out of three baselines the mean rate of change in baseline vector is statistically significant. Apparent motions on all three baselines are consistent with a pure shear with north-south compression and east-west expansion of 1 x 10 to the -7th/year. The ARIES measurements are consistent with the USGS geodolite networks in Southern California and the SAFE laser satellite ranging experiment. All three experiments are consistent with a 6 cm/year motion between the Pacific and North American Plates and a band of diffuse shear 300 km wide, except that corresponding rotation of the entire triangle is not found.

Musman, S.↗

Estimation of irrigated land using Landsat digital data

Techniques developed by the University of California and NASA for the utilization of multitemporal Landsat digital data in estimating and mapping irrigated land are presented. Three dates of Landsat were registered to each other and to a USGS 7.5 minute quadrangle map base for approximately 1.9 million acres of land. Other data registered include county boundaries, land use stratification, and digitized ground data. To identify irrigated land, an indicator was used which consisted of the ratio of MSS Band 7 to MSS Band 5 (the 7/5 ratio). A threshold 7/5 irrigated land value was determined for each date, as actively growing land generally has a higher 7/5 ratio than other cover classes. An estimate of irrigated land was determined by Landsat classification with ground data, at a relative standard error of + or - 7.98% at the 95% confidence interval. Mapping evaluation reveals a 94% accuracy, a 7.4% omission rate, and a 6.3% commission rate. In addition, a sample unit size evaluation recommends a 1-1 1/2 square mile sample range.

Brown, C. E.↗

Telemetry Speeds Forest-Fire Control

Airborne system rapidly delivers hard copy to firefighters. Sensors in airplane send data to ground station for image processing. Imagery immediately transferred to U.S. Geologic Survey (USGS) maps by photo interpreter. Maps transmitted by telecopies directly to fire-control camps. Receipt by fire camp less than 10 minutes. Information aids in decisions involving deployment of firefighters and equipment, flood control, monitoring oilspills, observing thermal currents, and pollutions monitoring.

Arvesen, J. C.↗

Analysis of the Tanana River Basin using LANDSAT data

Digital image classification techniques were used to classify land cover/resource information in the Tanana River Basin of Alaska. Portions of four scenes of LANDSAT digital data were analyzed using computer systems at Ames Research Center in an unsupervised approach to derive cluster statistics. The spectral classes were identified using the IDIMS display and color infrared photography. Classification errors were corrected using stratification procedures. The classification scheme resulted in the following eleven categories; sedimented/shallow water, clear/deep water, coniferous forest, mixed forest, deciduous forest, shrub and grass, bog, alpine tundra, barrens, snow and ice, and cultural features. Color coded maps and acreage summaries of the major land cover categories were generated for selected USGS quadrangles (1:250,000) which lie within the drainage basin. The project was completed within six months.

Morrissey, L. A.↗

Merging LANDSAT Derived Land Covers into Quad-referenced Geographic Information Systems

An approach for merging multiscene LANDSAT data bases into existing geographic information systems having 5-second or smaller cells is described. The approach uses the output from the State of Maryland's UNIVAC 1180-based LANDSAT classification program ASTEP (Algorithm Simulation Test and Evaluation) developed by NASA. The structure of the technique was designed to address the problems that emerged as part of the LANDSAT classification of the 64,000 square mile Chesapeake water shed involving twelve scenes. The removal of overlap among adjacent scenes, the crossreferencing of ground control points, and the isolation of the appropriate pixels from the LANDSAT data base for subsequent positioning into a file containing ancillary data referenced to a specific USGS 7 1/2 minute quadrangle sheet are described. Examples illustrate the clustering of classified LANDSAT pixels to define the dominant land use for each of 8,100 cells within a series of quadrangle sheets distributed over the State of Maryland. The approach uses a hard copy terminal tied to an ASTEP algorithm through telephone lines. A coordinate digitizing board for inputing the position of ground control points is also valuable, although manual measurements are possible. The approach is quite efficient and should be especially attractive for use on regional scale studies.

White, J. M.↗

Remote Sensing/gis Integration for Site Planning and Resource Management

The development of an interactive/batch gridded information system (array of cells georeferenced to USGS quad sheets) and interfacing application programs (e.g., hydrologic models) is discussed. This system allows non-programer users to request any data set(s) stored in the data base by inputing any random polygon's (watershed, political zone) boundary points. The data base information contained within this polygon can be used to produce maps, statistics, and define model parameters for the area. Present/proposed conditions for the area may be compared by inputing future usage (land cover, soils, slope, etc.). This system, known as the Hydrologic Analysis Program (HAP), is especially effective in the real time analysis of proposed land cover changes on runoff hydrographs and graphics/statistics resource inventories of random study area/watersheds.

Fellows, J. D.↗

Geometric accuracy of LANDSAT-4 MSS image data

Analyses of the LANDSAT-4 MSS image data of North Georgia provided by the EDC in CCT-p formats reveal that errors of approximately + or - 30 m in the raw data can be reduced to about + or - 55 m based on rectification procedures involving the use of 20 to 30 well-distributed GCPs and 2nd or 3rd degree polynomial equations. Higher order polynomials do not appear to improve the rectification accuracy. A subscene area of 256 x 256 pixels was rectified with a 1st degree polynomial to yield an RMSE sub xy value of + or - 40 m, indicating that USGS 1:24,000 scale quadrangle-sized areas of LANDSAT-4 data can be fitted to a map base with relatively few control points and simple equations. The errors in the rectification process are caused by the spatial resolution of the MSS data, by errors in the maps and GCP digitizing process, and by displacements caused by terrain relief. Overall, due to the improved pointing and attitude control of the spacecraft, the geometric quality of the LANDSAT-4 MSS data appears much improved over that of LANDSATS -1, -2 and -3.

Welch, R.↗

Mapping urban land cover from space: Some observations for future progress

The multilevel classification system adopted by the USGS for operational mapping of land use and land cover at levels 1 and 2 is discussed and the successes and failures of mapping land cover from LANDSAT digital data are reviewed. Techniques used for image interpretation and their relationships to sensor parameters are examined. The requirements for mapping levels 2 and 3 classes are considered.

Gaydos, L.↗

Evaluation of LANDSAT-4 TM and MSS ground geometry performance without ground control

Techniques and software developed to characterize the Washington, D.C. scene were improved and are being systematically applied to an Imperial Valley, CA scene. Digital elevation files are being acquired. One hundred seventy-two tiepoints were located in the Imperial Valley scene. They were digitized from USGS maps to determine their lat-long coordinates. A least squares fit is currently being performed between line-sample image data and the lat-long positions of the tiepoints. Thematic mapper scanner sweeps were determined for the Imperial Valley P-data. VICAR jobs are currently under way to analyze sample-direction offsets between sweeps in the data, as well as band to band registration offsets. Tiepoint location is about to begin in the Harrisburg, PA scene.

Bryant, N. A.↗

Computer implemented land cover classification using LANDSAT MSS digital data: A cooperative research project between the National Park Service and NASA. 3: Vegetation and other land cover analysis of Shenandoah National Park

Four LANDSAT frames, each corresponding to one of the four seasons were spectrally classified and processed using NASA-developed computer programs. One data set was selected or two or more data sets were marged to improve surface cover classifications. Selected areas representing each spectral class were chosen and transferred to USGS 1:62,500 topographic maps for field use. Ground truth data were gathered to verify the accuracy of the classifications. Acreages were computed for each of the land cover types. The application of elevational data to seasonal LANDSAT frames resulted in the separation of high elevation meadows (both with and without recently emergent perennial vegetation) as well as areas in oak forests which have an evergreen understory as opposed to other areas which do not.

Cibula, W. G.↗

Performance evaluation and geologic utility of LANDSAT-4 TM and MSS data

Radiometric calibration accuracy of TM data, radiometric comparison of A-, B-, and P-format data, and geometric registration accuracy of the TM data at enlarged scales were analyzed. Radiometric analysis of the Wind River Basin, Wyoming scene demonstrates that the TM system can be used to extract image reflectance spectra from ground targets following calibration of the system. It was also demonstrated that: (1) image DN (radiance values) vs. ground reflectance calibration scatterplots yield parameters which can be used to constrain atmospheric models and can determine TM radiometric sensitivity; (2) no significant degradation occurs as a result of radiometric and geometric correction by SCROUNGE processing; and (3) TM data can be enlarged to 1:24000 with no major geometric distortions or misregistration problems to USGS topographic maps.

Paylor, E. D.↗

Elysium Region, Mars: Characterization of tectonic features

In this paper the tectonic features of the Elysium region are identified and characterized. Identification of features was made using USGS controlled photomosaics (Elysium quadrangle, and portions of Amenthes and Cebrenia quadrangles); Viking Orbiter photographic data were used in individual cases to assist in identification. The positions and orientations of tectonic features can then be used, in conjunction with estimates of the mass of the volcanic load obtained from gravity modelling, to constrain the thickness of the elastic lithosphere in the region.

Hall, J. L.↗

Geometric Accuracy of LANDSAT-4 MSS Image Data

Analyses of the LANDSAT-4 MSS image data of North Georgia provided by the EDC in CTT-p formats reveal that errors of approximately + or - 30 m in the raw data can be reduced to about + or - 55 m based on rectification procedures involving the use of 20 to 30 well-distributed GCPs and 2nd or 3rd degree polynomial equations. Higher order polynomials do not appear to improve the rectification accuracy. A subscene area of 256 by 256 pixels was rectified with a 1st degree polynomial to yield an RMSE sub xy value of + or - 40 m, indicating that USGS 1:24,000 scale quadrangle-sized areas of LANDSAT-4 data can be fitted to a map base with relatively few control points and simple equations. The errors in the rectification process are caused by the spatial resolution of the MSS data, by errors in the maps and GCP digitizing process, and by displacements caused by terrain relief. Overall, due to the improved pointing and attitude control of the spacecraft, the geometric quality of the LANDSAT-4 MSS data appears much improved over that of LANDSAT-1, -2 AND -3.

Welch, R.↗

Relative Accuracy Assessment of LANDSAT-4 MSS and TM Data for Level 1 Land Cover Inventory

Digital data for the Washington, D.C. scene from the LANDSAT-4 Multispectral Scanner (MSS) and the LANDSAT-4 Thematic Mapper (TM) are compared. Classification success for the TM and MSS data sets was determined by a per pixel comparison with digitized ground verification data (GVD). These GVD were comprised of Level I land cover (developed, agriculture, forest, water, wetlands, and barren) for four USGS 7.5-minute topographic quadrangle maps. Classification accuracy was computed as an average value and for each cover type. Accuracy was expressed two ways: (1) as the percent correspondence with GVD (% correct) and (2) as the percent correspondence relative to both the GVD and LANDSAT classification schemes. Errors of omission and commission associated with the LANDSAT classifications were also computed. Specific results are discussed.

Middleton, E. M.↗