Search NASA⌕ Search

SEARCH · Search NASA

Results for “Uranium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Optimized 4 pi spherical shell depleted uranium-water shield weights for 200 to 550-megawatt reactors

Optimization calculations to determine minimum 4 pi spherical-shell weights were performed at 200-, 375-, and 550-megawatt-thermal reactor power levels. Monte Carlo analyses were performed for a reactor power level corresponding to 375 megawatts. Power densities for the spherical reactor model used varied from 64.2 to 256 watts per cubic centimeter. The dose rate constraint in the optimization calculations was 0.25 mrem per hour at 9.14 meters from the reactor center. The resulting shield weights were correlated with the reactor power levels and power densities by a regression analysis. The optimum shield weight for a 375-megawatt, 160-watt-per-cubic-centimeter reactor was 202,000 kilograms.

Wohl, M. L.↗
NASA NTRS1971

Calculation of radiation induced swelling of uranium mononitride using the digital computer program CYGRO 2

Fuel volume swelling and clad diametral creep strains were calculated for five fuel pins, clad with either T-111 (Ta-8W-2.4Hf) or PWC-11 (Nb-1Zr-0.1C). The fuel pins were irradiated to burnups between 2.7 and 4.6%. Clad temperatures were between 1750 and 2400 F (1228 and 1589 K). The maximum percentage difference between calculated and experimentally measured values of volumetric fuel swelling is 60%.

Davison, H. W.↗
NASA NTRS1972

In-pile and out-of-pile testing of a molybdenum-uranium dioxide cermet fueled themionic diode

The behavior of Mo-UO2 cermet fuel in a diode for thermionic reactor application was studied. The diode had a Mo-0.5 Ti emitter and niobium collector. Output power ranged from 1.4 to 2.8 W/cm squared at emitter and collector temperatures of 1500 deg and 540 C. Thermionic performance was stable within the limits of the instrumentation sensitivity. Through 1000 hours of in-pile operation the emitter was dimensionally stable. However, some fission gases (15 percent) leaked through an inner clad imperfection that occurred during fuel fabrication.

Diianni, D. C.↗
NASA NTRS1971

Uranium-bearing minerals of lunar rock 12013.

The U distribution in rock 12013 was studied by fission track and elemental mapping techniques. Major U-bearing phases are whitlockite, apatite, zircon, and phase beta, which is a Zr-Ti mineral rich in Fe, Nb, Y, REE, and containing up to 3.6% UO2, 4.7% ThO2 and 4.2% PbO. Calculated microprobe ages for phase beta average 4.0 b.y. and are in reasonable agreement with Rb-Sr and K-Ar ages. Phase beta plays a significant role in the U-Th-Pb systematics of rock 12012 and may play a similar role in the model ages of lunar soil.

Haines, E. L.↗
NASA NTRS1972

Lunar zirkelite - A uranium-bearing phase.

Zirkelite (simplified CaZrTiO5) containing 7-17 wt % oxides of trivalent elements (largely yttrium and the rare earths) and minor amounts of U, Th, and Pb is described from an Apollo 12 feldspathic peridotite (12036,9) and two KREEP-type norite lithic fragments separated from Apollo 14 loose fines (14163,39 and 14257,3). Quantitative electron microprobe analyses indicate that this lunar phase conforms more closely to the zirkelite formula than the zirconolite formula.

Busche, F. D.↗
NASA NTRS1973

Theoretical analysis of swelling characteristics of cylindrical uranium dioxide fuel pins with a niobium - 1-percent-zirconium clad

The relations between clad creep strain and fuel volume swelling are shown for cylindrical UO2 fuel pins with a Nb-1Zr clad. These relations were obtained by using the computer code CYGRO-2. These clad-strain - fuel-volume-swelling relations may be used with any fuel-volume-swelling model, provided the fuel volume swelling is isotropic and independent of the clad restraints. The effects of clad temperature (over a range from 118 to 1642 K (2010 to 2960 R)), pin diameter, clad thickness and central hole size in the fuel have been investigated. In all calculations the irradiation time was 500 hours. The burnup rate was varied.

Saltsman, J. F.↗
NASA NTRS1973

Fission-gas release from uranium nitride at high fission rate density

A sweep gas facility has been used to measure the release rates of radioactive fission gases from small UN specimens irradiated to 8-percent burnup at high fission-rate densities. The measured release rates have been correlated with an equation whose terms correspond to direct recoil release, fission-enhanced diffusion, and atomic diffusion (a function of temperature). Release rates were found to increase linearly with burnups between 1.5 and 8 percent. Pore migration was observed after operation at 1550 K to over 6 percent burnup.

Weinstein, M. B.↗
NASA NTRS1973

Nuclear characteristics of a fissioning uranium plasma test reactor with light-water cooling

An analytical study was performed to determine a design configuration for a cavity test reactor. Test section criteria were that an average flux of 10 to the 15th power neutrons/sq cm/sec (E less than or equal to 0.12 eV) be supplied to a 61-cm-diameter spherical cavity at 200-atm pressure. Design objectives were to minimize required driver power, to use existing fuel-element technology, and to obtain fuel-element life of 10 to 100 full-power hours. Parameter calculations were made on moderator region size and material, driver fuel arrangement, control system, and structure in order to determine a feasible configuration. Although not optimized, a configuration was selected which would meet design criteria. The driver fuel region was a cylindrical annular region, one element thick, of 33 MTR-type H2O-cooled elements (Al-U fuel plate configuration), each 101 cm long. The region between the spherical test cavity and the cylindrical driver fuel region was Be (10 vol. % H2O coolant) with a midplane dimension of 8 cm. Exterior to the driver fuel, the 25-cm-thick cylindrical and axial reflectors were also Be with 10 vol. % H2O coolant. The entire reactor was contained in a 10-cm-thick steel pressure vessel, and the 200-atm cavity pressure was equalized throughout the driver reactor. Fuel-element life was 50 hr at the required driver power of 200 MW. Reactor control would be achieved with rotating poison drums located in the cylindrical reflector region. A control range of about 18 percent delta k/k was required for reactor operation.

Whitmarsh, C. L., Jr.↗
NASA NTRS1973

Uranium dioxide fuel cladding strain investigation with the use of CYGRO-2 computer program

Previously irradiated UO2 thermionic fuel pins in which gross fuel-cladding strain occurred were modeled with the use of a computer program to define controlling parameters which may contribute to cladding strain. The computed strain was compared with measured strain, and the computer input data were studied in an attempt to get agreement with measured strain. Because of the limitations of the program and uncertainties in input data, good agreement with measured cladding strain was not attained. A discussion of these limitations is presented.

Smith, J. R.↗
NASA NTRS1973

Fission-gas-release rates from irradiated uranium nitride specimens

Fission-gas-release rates from two 93 percent dense UN specimens were measured using a sweep gas facility. Specimen burnup rates averaged .0045 and .0032 percent/hr, and the specimen temperatures ranged from 425 to 1323 K and from 552 to 1502 K, respectively. Burnups up to 7.8 percent were achieved. Fission-gas-release rates first decreased then increased with burnup. Extensive interconnected intergranular porosity formed in the specimen operated at over 1500 K. Release rate variation with both burnup and temperature agreed with previous irradiation test results.

Weinstein, M. B.↗
NASA NTRS1973

A fission gas release correlation for uranium nitride fuel pins

A model was developed to predict fission gas releases from UN fuel pins clad with various materials. The model was correlated with total release data obtained by different experimentors, over a range of fuel temperatures primarily between 1250 and 1660 K, and fuel burnups up to 4.6 percent. In the model, fission gas is transported by diffusion mechanisms to the grain boundaries where the volume grows and eventually interconnects with the outside surface of the fuel. The within grain diffusion coefficients are found from fission gas release rate data obtained using a sweep gas facility.

Weinstein, M. B.↗
NASA NTRS1973

Uranium and thorium in achondrites.

The abundances of U and Th in 19 achondrites and two pallasite olivines have been measured by radiochemical neutron activation analysis. Brecciated eucrites are enriched relative to chondrites in both elements by factors between 10 and 20, perhaps as a result of a magmatic differentiation process. Two unbrecciated eucrites are far less enriched, possibly due to their origin as igneous cumulates. The diogenites Johnstown and Shalka contain approximately chondritic levels of U and Th, but Ellemeet is 10 times lower. The abundances in three howardites are in good agreement with those expected from major element data for a mixing model with eucrite and diogenite end members. The high O-18 basaltic achondrites Nakhla, Shergotty and Angra dos Reis have a range of U and Th abundances similar to the brecciated eucrites and howardites, but have systematically higher Th/U ratios.

Morgan, J. W.↗
NASA NTRS1974

Electrical heating tests of uranium dioxide external fuel configuration at emitter temperature of 1900 K

Testing of two fuel clad specimens for thermionic reactor application is described. The annular UO2 fuel was clad on both sides with tungsten; heat rejection was radially inward. The tests were intended to study inner clad stability, fuel redistribution, and fuel melting problems. The specimens were tested in a vacuum chamber using electron bombardment heating. Fuel structural changes were studied using periodic gammagraphs and posttest metallography. The first specimen test was terminated at 50 hours because of a braze failure. The second specimen was tested for 240 hours when an outer clad leak developed due to a tungsten-water reaction. The fuel developed numerous cracks on cooldown but the inner clad remained dimensionally stable. The fuel cover gas did not impede the rate of fuel redistribution. Posttest examination showed the fuel had not melted during operation.

Diianni, D. C.↗
NASA NTRS1974

Out-of-pile creep behavior of uranium carbide

Compression creep tests were investigated on various UC-based fuel materials having a variation in both density and composition. Specimens were prepared by casting and by hot pressing. Steady-state creep rates were measured under vacuum at 1400 to 1800 C in the stress range 500-4000 psi.

Wright, T. R.↗