Search NASA⌕ Search

SEARCH · Search NASA

Results for “VTOL AIRCRAFT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Case studies in Aircraft Parameter Identification

Three case studies in Aircraft Parameter Identification using simulated data for X-22 VTOL aircraft and flight test data for HL-10 and M2/F3 lifting bodies. After a brief discussion of the previous techniques and their limitations, a technique based on the Maximum Likelihood criterion is described. The problems of identifiability and uniqueness in determining the Stability and Control derivatives from flight test data are discussed and several methods for alleviating these problems are presented. The flight test data is analyzed in several different ways for obtaining physically meaningful estimates for the aircraft parameters.

Mehra, R. K.↗
NASA NTRS1982

A remote augmentor lift system with a turbine bypass engine

Two supersonic vertical takeoff or landing (VTOL) aircraft engine types, a conventional medium bypass ratio turbofan, and a turbine bypass turbojet were studied. The aircraft assumed was a clipped delta wing with canard configuration. A VTOL deck launched intercept, DLI, mission with Mach 1.6 dash and cruise segments was used as the design mission. Several alternate missions requiring extended subsonic capabilities were analyzed. Comparisons were made between the turbofan (TF) and the turbine bypass turbojet (TBE) engines in airplane types using a Remote Augmented Lift Systems, RALS and a Lift plus Lift Cruise system (L+LC). The figure of merit was takeoff gross weight for the VTOL DLI mission. The results of the study show that the turbine bypass turbojet and the conventional turbofan are competitive engines for both type of aircraft in terms of takeoff gross weight and range. However, the turbine bypass turbojet would be a simpler engine and may result in more attractive life cycle costs and reduced maintenance. The RALS and L+LC airplane types with either TBE or TF engines have approximately the same aircraft takeoff gross weight.

Fishbach, L. H.↗
NASA NTRS1972

Equations of motion for the X-14 Aircraft, phase 2 study

A study of the control and power requirements of the X-14 VTOL aircraft is presented. The complete equations of motion for X-14 are derived. The fundamental assumption is that the aircraft is a single rigid body. The equations of motion are derived with respect to a set of axes fixed to the aircraft. Additional assumptions used are that any wind disturbances are irrotational that the twin engines used on the aircraft rotate in the same direction at the same speed and that the engine exhaust is diverted by means of vanes to provide a direction varying thrust vector. The equations obtained are subsequently linearized about various reference conditions and numerical values for the trim parameters and the stability derivatives at these conditions are tabulated.

Hoffman, M. A.↗
NASA NTRS1967

Langley's 50th Year

This video gives an historical overview of Langley Research Center's major achievements in aeronautics and astronautics research between the years 1917-1967. Historical footage accompanies explanation of research into wind tunnel, spin tunnel, and hydrodynamic test tanks for studying aircraft airflow, wartime research into overwater combat ditching, diving, and braking, the X series aircraft experiments with supersonic flight, helicopter and vertical Take Off and Landing (VTOL) aircraft, airport landing studies, and early prototypes for the Space Shuttle.

Source record↗
NASA NTRS1991

Far-field hover acoustic characteristics of the XV-15 tiltrotor aircraft with Advanced Technology Blades

An experimental investigation has been conducted with the XV-15 tilt-rotor VTOL aircraft in order to ascertain the noise-reduction efficacy of Advanced Technology Blades (ATBs). Attention is given to acoustic directivity characteristics in the lower hemisphere of the sound field. Modest overall sound pressure levels (OASPLs) were measured near the in-plane position, showing that thickness noise is not significant in hover when ATBs are used; rotor tip-speed reductions reduced the average OASPL by nearly 8 dB in-plane and by nearly 5 dB at 12.6 deg below the rotor plane.

Conner, David A.↗
NASA NTRS1983

An overview of V/STOL aircraft development

In reviewing the years of aviation development, it can be seen that vertical-takeoff-and-landing (VTOL) flight was considered before conventional fixed-wing operations. However, it has been difficult to develop a VTOL capability. The present investigation is concerned with a review of the historical development of VTOL aircraft, taking into account lessons learned from a selected group of concepts. Attention is given to the Flying Bedsteads, the tail-sitter designs, the Air Test Vehicle (ATV) and X-14 aircraft, the SC-1, the XV-3 tilt-rotor aircraft, the VZ3-RY deflected slipstream, the X-18 tilt wing, the VZ-2 tilt wing, the VZ-4 ducted fan, the Harrier, the XV-4A (Hummingbird), the Forger, and the XV-15 advanced tilt rotor.

Anderson, S. B.↗
NASA NTRS2018

Incorporating Test Data for Small UAS at the Conceptual Design Level

Increasing demand for improved capabilities of small unmanned aircraft systems (sUAS) has generated interest in improving the design techniques for these vehicles. sUAS have typically been designed using iterative methods with multiple prototypes, but advancements in aircraft design software will make it possible to generate conceptual designs of very small VTOL aircraft with reduced hardware prototyping. This paper describes a research effort to generate a conceptual design of an approximately 6-lb quadcopter using the NASA rotorcraft design software NDARC. Wind tunnel and hover test data are used to validate and refine the conceptual design results. The effects of parametric design variations on vehicle scale are shown. The design study described herein shows that the NDARC software, which was designed for full-scale rotorcraft, can be used to design and evaluate sUAS vehicles.

Russell, Carl R.↗
NASA NTRS2014

NASA Langley Distributed Propulsion VTOL Tilt-Wing Aircraft Testing, Modeling, Simulation, Control, and Flight Test Development

Control of complex Vertical Take-Off and Landing (VTOL) aircraft traversing from hovering to wing born flight mode and back poses notoriously difficult modeling, simulation, control, and flight-testing challenges. This paper provides an overview of the techniques and advances required to develop the GL-10 tilt-wing, tilt-tail, long endurance, VTOL aircraft control system. The GL-10 prototype's unusual and complex configuration requires application of state-of-the-art techniques and some significant advances in wind tunnel infrastructure automation, efficient Design Of Experiments (DOE) tunnel test techniques, modeling, multi-body equations of motion, multi-body actuator models, simulation, control algorithm design, and flight test avionics, testing, and analysis. The following compendium surveys key disciplines required to develop an effective control system for this challenging vehicle in this on-going effort.

Rothhaar, Paul M.↗
NASA NTRS1976

Methodology for design of active controls for V/STOL aircraft

An effort to develop techniques for the design of integrated, fully automatic flight control systems for powered lift STOL and VTOL aircraft is described. The structure is discussed of the control system which has been developed to deal with the strong nonlinearities inherent in this class of aircraft, to admit automatic coupling with the advanced ATC requiring accurate execution of complex trajectories, and to admit a variety of active control tasks. The specific case considered is the Augmentor Wing Research Aircraft.

Meyer, G.↗
NASA NTRS1982

Control optimization, stabilization and computer algorithms for aircraft applications

The analysis and design of complex multivariable reliable control systems are considered. High performance and fault tolerant aircraft systems are the objectives. A preliminary feasibility study of the design of a lateral control system for a VTOL aircraft that is to land on a DD963 class destroyer under high sea state conditions is provided. Progress in the following areas is summarized: (1) VTOL control system design studies; (2) robust multivariable control system synthesis; (3) adaptive control systems; (4) failure detection algorithms; and (5) fault tolerant optimal control theory.

Athans, M.↗
NASA NTRS2018

Theory Validation - 2 Points of View

The task of validating any given theory against any given proprotor/propeller data set is of immense importance. Not just to the researchers who are developing a theory, but to the working engineers using the theory to design a proprotor/propeller. However, there is major difference in how the two groups see validation. This difference is that, most frequently, researchers see the validation in coefficient form as, for example, CP versus CT or Figure of Merit versus CT. In contrast, design engineers are always working in the dimensional world as, for example, horsepower required to hover versus aircraft weight. The objective of the design engineer is, of course, to release drawings and specifications to manufacturing so a VTOL aircraft will be built with reasonably high assurance that the aircraft will meet the primary specifications.

Harris, Franklin D.↗
NASA NTRS1974

Ejector-powered lift systems for V/STOL aircraft

The paper takes a brief look at powered lift from the point of view of the operator and the designer, considers application of an ejector-powered lift system to both STOL and VTOL aircraft, and describes some of the advantages of an ejector concept. Performance and noise characteristics of a simple ejector are described, and some comments are made regarding the Buffalo/Spey Augmentor-Wing proof-of-concept aircraft.

Whittley, D. C.↗
NASA NTRS1972

Study of aircraft in intraurban transportation systems

A systems analysis was conducted to define the technical economic and operational characteristics of an aircraft transportation system for short-range intracity commutor operations. The analysis was for 1975 and 1985 in the seven county, Detroit, Michigan area. STOL and VTOL aircraft were studied in sizes from 40 to 120 passengers. The preferred vehicle for the Detroit area was the deflected slipstream STOL. Since the study was parametric in nature, it is applicable to generalization, and it was concluded that a feasible intraurban air transportation system could be developed in many viable situations.

Stout, E. G.↗
NASA NTRS1978

Potential acoustic benefits of circulation control rotors

The fundamental aeroacoustic mechanisms responsible for noise generation on a rotating blade are theoretically examined. Their contribution to the overall rotor sound pressure level is predicted. Results from a theory for airfoil trailing edge noise are presented. Modifications and extensions to other source theories are described where it is necessary to account for unique aspects of circulation control (CC) aerodynamics. The circulation control rotor (CCR), as embodied on an X-wing vertical takeoff and landing (VTOL) aircraft, is used as an example for computational purposes, although many of the theoretical results presented are generally applicable to other CC applications (such as low speed rotors, propellers, compressors, and fixed wing aircraft). Using the analytical models, it is shown that the utilization CC aerodynamics theoretically makes possible unprecedented advances in rotor noise reduction. For the X-wing VTOL these reductions appear to be feasible without incurring significant attendant performance and weight penalties.

Williams, R. M.↗
NASA NTRS1961

A Flight Examination of Operating Problems of V/STOL Aircraft in STOL-Type Landing and Approach

A flight investigation has been conducted using a large twin-engine cargo aircraft to isolate the problems associated with operating propeller-driven aircraft in the STOL speed range where appreciable engine power is used to augment aerodynamic lift. The problems considered would also be representative of those of a large overloaded VTOL aircraft operating in an STOL manner with comparable thrust-to-weight ratios. The study showed that operation at low approach speeds was compromised by the necessity of maintaining high thrust to generate high lift and yet achieving the low lift-drag ratios needed for steep descents. The useable range of airspeed and flight path angle was limited by the pilot's demand for a positive climb margin at the approach speed, a suitable stall margin, and a control and/or performance margin for one engine inoperative. The optimum approach angle over an obstacle was found to be a compromise between obtaining the shortest air distance and the lowest touchdown velocity. In order to realize the greatest low-speed potential from STOL designs, the stability and control characteristics must be satisfactory.

Innis, Robert C.↗