Search NASA⌕ Search

SEARCH · Search NASA

Results for “Weight reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Advanced meteoroid and debris shielding concepts

The results of the shielding screening and optimization work conducted at the NASA Johnson Space Center Hypervelocity Impact Research Laboratory (HIRL) are described. The impact tests to investigate and optimize certain aspects of the aluminum mesh double-bumper concept, which was considered the best performer in the screening test, are analyzed. Preliminary results indicate that the aluminum mesh double-bumper concept shows a 30 to 40 percent weight reduction compared to an aluminum Whipple shield in the velocity range study, besides such advantages as an increased resistance to penetration and the fact that the aluminum mesh does not produce damaging secondary ejecta particles. It is suggested that the ballistic protection can be improved even more if an intermediate layer of a high-strength cloth is attached near the rear wall.

Christiansen, Eric L.↗
NASA NTRS1989

Space Station Freedom solar array design development

The Space Station Freedom solar array program is required to provide a 75-kW power module that uses eight solar array (SA) wings over a four-year period in low earth orbit (LEO). Each wing will be capable of providing 23.4 kW at the 4-yr design point. The design of flexible-substrate SAs that must survive exposure to the space environment, including atomic oxygen, for an operating life of fifteen years is discussed. The tradeoff study and development areas being investigated include solar cell module size, solar cell weld pads, panel stiffener frames, materials inherently resistant to atomic oxygen, and weight reduction design alternatives.

Winslow, Cindy↗
NASA NTRS1990

Advanced tube-bundle rocket thrust chamber

An advanced rocket thrust chamber for future space application is described along with an improved method of fabrication. Potential benefits of the concept are improved cyclic life, reusability, and performance. Performance improvements are anticipated because of the enhanced heat transfer into the coolant which will enable higher chamber pressure in expander cycle engines. Cyclic life, reusability and reliability improvements are anticipated because of the enhanced structural compliance inherent in the construction. The method of construction involves the forming of the combustion chamber with a tube-bundle of high conductivity copper or copper alloy tubes, and the bonding of these tubes by an electroforming operation. Further, the method of fabrication reduces chamber complexity by incorporating manifolds, jackets, and structural stiffeners while having the potential for thrust chamber cost and weight reduction.

Kazaroff, John M.↗
NASA NTRS1990

Review of the transmissions of the Soviet helicopters

A review of the following aspects of Soviet helicopter transmissions is presented: transmitted power, weight, reduction ratio, RPM, design configuration, comparison of different type of manufacturing methods, and a description of the materials and technologies applied to critical transmission components. Included are mechanical diagrams of the gearboxes of the Soviet helicopters and test stands for testing gearbox and main shaft. The quality of Soviet helicopter transmissions and their Western counterparts are assessed and compared.

Chaiko, Lev I.↗
NASA NTRS1990

New method of making advanced tube-bundle rocket thrust chambers

An improved method of fabrication rocket chambers for future space applications is described. Included are fabrication demonstrator and test chambers produced by this method. This concept offers the promise of improved cyclic life, reusability, and performance. The performance is improved because of the enhanced enthalpy extraction. The improved cyclic life, reusability, and reliability is improved because of the structural compliance inherent in the construction. The method of construction involves the forming of the combustion chamber by a tube-bundle of high conductivity copper or copper alloy tubes and the bonding of these tubes by a unique electroforming operation. Furthermore, the method of fabrication reduces chamber complexity by incorporating manifolds, and structural stiffeners while having the potential for thrust chamber cost and weight reduction.

Kazaroff, John M.↗
NASA NTRS1991

Technology needs for high speed rotorcraft (2)

An analytical study was conducted to identify rotorcraft concepts best capable of combining a cruise speed of 350 to 450 knots with helicopter-like low speed attributes, and to define the technology advancements needed to make them viable by the year 2000. A systematic approach was used to compare the relative attributes and mission gross weights for a wide range of concepts, resulting in a downselect to the most promising concept/mission pairs. For transport missions, tilt-wing and variable diameter tilt-rotor (VDTR) concepts were found to be superior. For a military scout/attack role, the VDTR was best, although a shrouded rotor concept could provide a highly agile, low observable alternative if its weight empty fraction could be reduced. A design speed of 375 to 425 knots was found to be the maximum desirable for transport missions, with higher speed producing rapidly diminishing benefits in productivity. The key technologies that require advancement to make the tilt-wing and VDTR concepts viable are in the areas of wing and proprotor aerodynamics, efficient structural design, flight controls, refinement of the geared flap pitch control system, expansion of the speed/descent envelope, and the structural and aerodynamic tradeoffs of wing thickness and forward sweep. For the shrouded rotor, weight reduction is essential, particularly with respect to the mechanism for covering the rotor in cruise.

Scott, Mark W.↗
NASA NTRS1991

Gallium Arsenide solar cell radiation damage experiment

Gallium arsenide (GaAs) solar cells for space applications from three different manufactures were irradiated with 10 MeV protons or 1 MeV electrons. The electrical performance of the cells was measured at several fluence levels and compared. Silicon cells were included for reference and comparison. All the GaAs cell types performed similarly throughout the testing and showed a 36 to 56 percent power areal density advantage over the silicon cells. Thinner (8-mil versus 12-mil) GaAs cells provide a significant weight reduction. The use of germanium (Ge) substrates to improve mechanical integrity can be implemented with little impact on end of life performance in a radiation environment.

Maurer, R. H.↗
NASA NTRS1990

Advanced composites research and development for transport aircraft

This paper highlights past experiences, lessons learned, state-of-the-art and current research activities directed at providing an integrated 'affordable' data base for composite structures. Composite secondary and empennage structures are in production on several transport aircraft. The weight reduction potential of composite structures is well documented. However, the cost to develop and produce composite structures remains the major barrier to increased application of this technology to transport aircraft. Specific technology items that are being developed under the NASA Advanced Composites Technology Program are described. Materials, design concepts, structural mechanics methodology and manufacturing processes and equipment are under development or are emerging that are expected to lead to an integrated 'affordable' data base. Technology verification for the next decade is expected to require fabrication and testing of full-scale wing-box and fuselage-section components before certificatiaon can occur and production commitments can be made.

Davis, John G., Jr.↗
NASA NTRS1990

Preliminary design and analysis of an advanced rotorcraft transmission

Future rotorcraft transmissions of the 1990s and beyond the year 2000 require the incorporation of key emerging material and component technologies using advanced and innovative design practices in order to meet the requirements for a reduced weight-to-power ratio, a decreased noise level, and a substantially increased reliability. The specific goals for future rotocraft transmissions when compared with current state-of-the-art transmissions are a 25 percent weight reduction, a 10-dB reduction in the transmitted noise level, and a system reliability of 5000 hours mean-time-between-removal for the transmission. This paper presents the results of the design studies conducted to meet the stated goals for an advanced rotorcraft transmission. These design studies include system configuration, planetary gear train selection, and reliability prediction methods.

Henry, Z. S.↗
NASA NTRS1990

Advanced Rotorcraft Transmission (ART) program review

This paper summarizes the work accomplished to date on the NASA/Army Advanced Rotorcraft Transmission (ART) program. A 23-percent weight reduction has been demonstrated for a high output reduction ratio split path transmission compared to an aggressive program goal of 25-percent. Greater than 10 dB noise reduction in the cabin is achieved by the use of high contact ratio spur and double helical gears. In addition, mean times between transmission removals have been increased by almost four fold. These performance gains have been achieved by application of advanced transmission technology concepts. Technology areas are being explored which offer high gain but at relatively high risk in such areas as composites, split power gear concepts, double helical gears, new gear materials, high speed spring clutches, and ceramic rolling element bearings.

Kish, Jules↗
NASA NTRS1990

Light weight, high power, high voltage dc/dc converter technologies

Power-conditioning weight reductions by orders of magnitude will be required to enable the megawatt-power-level space systems envisioned by the Strategic Defense Initiative, the Air Force, and NASA. An interagency program has been initiated to develop an 0.1-kg/kW dc/dc converter technology base for these future space applications. Three contractors are in the first phase of a competitive program to develop a megawatt dc/dc converter. Researchers at NASA Lewis Research Center are investigating innovative converter topology control. Three different converter subsystems based on square wave, resonant, and super-resonant topologies are being designed. The components required for the converter designs cover a wide array of technologies. Two different switches, one semiconductor and the other gas, are under development. Issues related to thermal management and material reliability for inductors, transformers, and capacitors are being investigated in order to maximize power density. A brief description of each of the concepts proposed to meet the goals of this program is presented.

Kraus, Robert↗
NASA NTRS1991

Advanced Rotorcraft Transmission (ART) program status

A weight reduction of 23 percent, noise reduction greater than 10 dB, and almost a fourfold increase in mean time between transmission removals has been demonstrated for a helicopter gearbox having a high output reduction ratio split path gear arrangement. These performance gains have been achieved by application of advanced transmission technology concepts in areas which offer high gain but are outside of normal design practices. New technology is being developed in such areas as split power gear concepts, composites, double helical gears, new gear materials, high speed spring clutches, and ceramic rolling element bearings. The programs, when completed, will provide demonstrated component and drive arrangement technology supported by analytical tools. The work is being accomplished under a CR&D program funded by NASA/Army termed the Advanced Rotorcraft transmission (ART) program. It is expected that the ART technology will be incorporated in future rotorcraft of the 1990s and 2000s. This paper summarizes the work accomplished to date on the program by Sikorsky Aircraft.

Kish, Jules↗
NASA NTRS1992

Collapse analysis of a waffle plate strongback for Space Station Freedom

The structural integrity was studied of the Integrated Equipment Assembly (IEA) Strongback of the SSF for the launch environment. The strongback structure supports the electrical power system for SSF. To achieve minimum launch mass, it is essential that flight structures are designed as light as possible. A nonlinear structural analysis was conducted to determine the collapse load of the structure and the associated factor of safety against the service loads. A modeling technique is provided for simulating the load conditions and the buckling and post buckling (collapse) load is evaluated of the IEA Strongback structure, using the finite element computer code MARC. Two of four strongback panels were modeled and analyzed. The effects were examined of the following factors on the global behavior of the strongback panels: (1) load simplification and simulation; (2) type of support boundary conditions; and (3) the possibility of weight reduction of the original structure. For this purpose, several models of the two panels of the strongback were considered. The stress level and distribution in the panels for launch condition, the Eigenvalue critical buckling load and/or the collapse load were determined.

Monasa, Frank F.↗
NASA NTRS1992

High-speed civil transport flight- and propulsion-control technological issues

Technology advances required in the flight and propulsion control system disciplines to develop a high speed civil transport (HSCT) are identified. The mission and requirements of the transport and major flight and propulsion control technology issues are discussed. Each issue is ranked and, for each issue, a plan for technology readiness is given. Certain features are unique and dominate control system design. These features include the high temperature environment, large flexible aircraft, control-configured empennage, minimizing control margins, and high availability and excellent maintainability. The failure to resolve most high-priority issues can prevent the transport from achieving its goals. The flow-time for hardware may require stimulus, since market forces may be insufficient to ensure timely production. Flight and propulsion control technology will contribute to takeoff gross weight reduction. Similar technology advances are necessary also to ensure flight safety for the transport. The certification basis of the HSCT must be negotiated between airplane manufacturers and government regulators. Efficient, quality design of the transport will require an integrated set of design tools that support the entire engineering design team.

Ray, J. K.↗
NASA NTRS1992

Feasibility of magnetic bearings for advanced gas turbine engines

The application of active magnetic bearings to advanced gas turbine engines will provide a product with major improvements compared to current oil lubricated bearing designs. A rethinking of the engine rotating and static structure design is necessary and will provide the designer with significantly more freedom to meet the demanding goals of improved performance, increased durability, higher reliability, and increased thrust to weight ratio via engine weight reduction. The product specific technology necessary for this high speed, high temperature, dynamically complex application has been defined. The resulting benefits from this approach to aircraft engine rotor support and the complementary engine changes and improvements have been assessed.

Hibner, David↗
NASA NTRS1990

Applications of composites to armaments

The U.S. Army Materials Technology Laboratory (MTL) has been engaged in investigating the feasibility of applying composite materials to the lightening of artillery structural components since about 1982. In this period a number of efforts were carried out either in-house at MTL or by supporting organizations, including Benet Laboratory and the Oak Ridge National Laboratory, aimed at investigating applications to various components of towed artillery. Salient features of these efforts and some important conclusions that have come out of them are described. In addition to organic matrix composites, discontinuously reinforced metal matrix composites appear to have great potential for weight reduction in this type of application.

Oplinger, Don W.↗
NASA NTRS1991

A kind of small hydrogen maser for time-keeping

A kind of small hydrogen maser standard for timekeeping is being developed at Shanghai Observatory. The maser employs a cylindrical capacitively loaded cavity construction, resulting in significant size and weight reduction compared to a traditional hydrogen maser. The Q of the compact cavity is electronically enhanced by a suitable positive feedback into the cavity to enable sustained maser oscillation. The long-term stability of the maser is improved by a cavity frequency stabilization servo-system. The design and development of the maser, as well as photographs of the new maser system during the construction phase.

Z. C. Zhai↗
NASA NTRS1990

A multi-shock concept for spacecraft shielding

A spacecraft-shielding technique is investigated in which the geometrical configuration and material used are emphasized. Ultrathin spaced shield elements are employed to repeatedly shock the impacting projectile to a high energy state that causes melting and vaporization. The ratio of the thickness of the elements to projectile diameter corresponds to a relatively small percentage of debris-plume mass that can be withstood by the backsheet. The strength of the backsheet is thereby reduced and employed in a specific configuration that prevents the debris plume from destroying successive sheets before the particulates reach the sheet. The primary benefit is weight reduction of 30 percent when compared to a 'Whipple shield' fabricated with the same material. The concept is shown to be effective against all impact types tested and produces minimal secondary debris.

Cour-Palais, Burton G.↗