SEARCH · Search NASA

Results for “Wing body configuration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

All sources NASA NTRS DOE OSTI

NASA NTRS1999

Development and Validation of a Fast, Accurate and Cost-Effective Aeroservoelastic Method on Advanced Parallel Computing Systems

Progress to date towards the development and validation of a fast, accurate and cost-effective aeroelastic method for advanced parallel computing platforms such as the IBM SP2 and the SGI Origin 2000 is presented in this paper. The ENSAERO code, developed at the NASA-Ames Research Center has been selected for this effort. The code allows for the computation of aeroelastic responses by simultaneously integrating the Euler or Navier-Stokes equations and the modal structural equations of motion. To assess the computational performance and accuracy of the ENSAERO code, this paper reports the results of the Navier-Stokes simulations of the transonic flow over a flexible aeroelastic wing body configuration. In addition, a forced harmonic oscillation analysis in the frequency domain and an analysis in the time domain are done on a wing undergoing a rigid pitch and plunge motion. Finally, to demonstrate the ENSAERO flutter-analysis capability, aeroelastic Euler and Navier-Stokes computations on an L-1011 wind tunnel model including pylon, nacelle and empennage are underway. All computational solutions are compared with experimental data to assess the level of accuracy of ENSAERO. As the computations described above are performed, a meticulous log of computational performance in terms of wall clock time, execution speed, memory and disk storage is kept. Code scalability is also demonstrated by studying the impact of varying the number of processors on computational performance on the IBM SP2 and the Origin 2000 systems.

Goodwin, Sabine A.↗

NASA NTRS1985

Use of a hyperbolic grid generation scheme in simulating supersonic viscous flow about three-dimensional winged configuration

The present paper describes a numerical mesh generation technique to be used with an implicit finite difference method for simulating visous supersonic flow about low-aspect-ratio wing body configurations using a single grid strategy. The computational domain is segmented into multiple regions, with borders located in supersonic areas to avoid the otherwise costly interfacing procedure between adjacent segments. The numerical procedure is applied to calculate the turbulent flow around the shuttle orbiter and a canard projectile at supersonic free stream Mach number.

Rizk, Y. M.↗

NASA NTRS2010

Hybrid Wing Body Aircraft System Noise Assessment with Propulsion Airframe Aeroacoustic Experiments

A system noise assessment of a hybrid wing body configuration was performed using NASA s best available aircraft models, engine model, and system noise assessment method. A propulsion airframe aeroacoustic effects experimental database for key noise sources and interaction effects was used to provide data directly in the noise assessment where prediction methods are inadequate. NASA engine and aircraft system models were created to define the hybrid wing body aircraft concept as a twin engine aircraft with a 7500 nautical mile mission. The engines were modeled as existing technology high bypass ratio turbofans. The baseline hybrid wing body aircraft was assessed at 22 dB cumulative below the FAA Stage 4 certification level. To determine the potential for noise reduction with relatively near term technologies, seven other configurations were assessed beginning with moving the engines two fan nozzle diameters upstream of the trailing edge and then adding technologies for reduction of the highest noise sources. Aft radiated noise was expected to be the most challenging to reduce and, therefore, the experimental database focused on jet nozzle and pylon configurations that could reduce jet noise through a combination of source reduction and shielding effectiveness. The best configuration for reduction of jet noise used state-of-the-art technology chevrons with a pylon above the engine in the crown position. This configuration resulted in jet source noise reduction, favorable azimuthal directivity, and noise source relocation upstream where it is more effectively shielded by the limited airframe surface, and additional fan noise attenuation from acoustic liner on the crown pylon internal surfaces. Vertical and elevon surfaces were also assessed to add shielding area. The elevon deflection above the trailing edge showed some small additional noise reduction whereas vertical surfaces resulted in a slight noise increase. With the effects of the configurations from the database included, the best available noise reduction was 40 dB cumulative. Projected effects from additional technologies were assessed for an advanced noise reduction configuration including landing gear fairings and advanced pylon and chevron nozzles. Incorporating the three additional technology improvements, an aircraft noise is projected of 42.4 dB cumulative below the Stage 4 level.

Thomas, Russell H.↗

NASA NTRS1990

Two and three dimensional grid generation by an algebraic homotopy procedure

An algebraic method for generating two- and three-dimensional grid systems for aerospace vehicles is presented. The method is based on algebraic procedures derived from homotopic relations for blending between inner and outer boundaries of any given configuration. Stable properties of homotopic maps have been exploited to provide near-orthogonality and specified constant spacing at the inner boundary. The method has been successfully applied to analytically generated blended wing-body configurations as well as discretely defined geometries such as the High-Speed Civil Transport Aircraft. Grid examples representative of the capabilities of the method are presented.

Moitra, Anutosh↗

NASA NTRS1987

Numerical simulation of the hypersonic flow around lifting vehicles

A method for solving the viscous hypersonic flow field around realistic configurations is presented. The numerical procedure for generating the required finite difference grid and the two-factored implicit flow solver are described. Results are presented for the shuttle orbiter and a generic wing-body configuration at hypersonic Mach numbers.

Rizk, Yehia↗

NASA NTRS1987

Numerical simulation of the hypersonic flow around lifting vehicles

A method of solving the viscous hypersonic flow field around realistic configurations is presented. The numerical procedure for generating the required finite difference grid and the two-factored implicit flow solver are described. Results are presented for the shuttle orbiter and a generic wing-body configuration at hypersonic Mach numbers.

Rizk, Yehia↗

NASA NTRS1996

Aerodynamic Shape Optimization of Complex Aircraft Configurations via an Adjoint Formulation

This work describes the implementation of optimization techniques based on control theory for complex aircraft configurations. Here control theory is employed to derive the adjoint differential equations, the solution of which allows for a drastic reduction in computational costs over previous design methods (13, 12, 43, 38). In our earlier studies (19, 20, 22, 23, 39, 25, 40, 41, 42) it was shown that this method could be used to devise effective optimization procedures for airfoils, wings and wing-bodies subject to either analytic or arbitrary meshes. Design formulations for both potential flows and flows governed by the Euler equations have been demonstrated, showing that such methods can be devised for various governing equations (39, 25). In our most recent works (40, 42) the method was extended to treat wing-body configurations with a large number of mesh points, verifying that significant computational savings can be gained for practical design problems. In this paper the method is extended for the Euler equations to treat complete aircraft configurations via a new multiblock implementation. New elements include a multiblock-multigrid flow solver, a multiblock-multigrid adjoint solver, and a multiblock mesh perturbation scheme. Two design examples are presented in which the new method is used for the wing redesign of a transonic business jet.

Reuther, James↗

NASA NTRS1992

Effect of canard deflection on close-coupled canard-wing-body aerodynamics

The thin-layer Navier-Stokes equations are solved for the flow about a canard-wing-body configuration at transonic Mach numbers of 0.85 and 0.90, angles of attack from -4 to 10 degrees and canard deflection angles from -10 to +10 degrees. Effects of canard deflection on aerodynamic performance, including canard-wing vortex interaction, are investigated. Comparisons with experimental measurements of surface pressures, lift, drag and pitching moments are made to verify the accuracy of the computations. The results of the study show that the deflected canard downwash not only influences the formation of the wing leading-edge vortex, but can cause the formation of an unfavorable vortex on the wing lower surface as well.

Tu, Eugene L.↗

NASA NTRSDate not supplied

High-Lift Prediction Workshop 5: Summary of Reynolds-Averaged Navier–Stokes Technology Focus Group Summary

The fifth High-Lift Prediction Workshop (HLPW-5), which involved the high-lift version of the NASA common research model in several configurations, assessed various computational fluid dynamics methods, including Reynolds-averaged Navier-Stokes (RANS) and hybrid large-eddy simulations. This paper summarizes RANS solutions computed on fixed grids. Case 1, a verification case, considered a simple wing-body configuration and focused on grid convergence of lift, drag, and pitching moment coefficients. Case 2 is a configuration buildup case that focused on predicting the effects of increasing geometric complexity. For buildup configurations with slats, flaps, and a nacelle/pylon (configurations 2.2, 2.3, and 2.4), wind-tunnel data were provided by ONERA. Case 3 focused on the reference landing configuration at four Reynolds-number conditions. For Case 1, grid-converged RANS solutions were achieved using the standard Spalart-Allmaras (SA) turbulence model and the SA model with a quadratic constitutive relation and a rotation correction. Agreement between RANS solutions was observed for the simplest configuration 2.1 of Case 2 with the standard SA model. For other configurations, agreement between RANS solutions was hampered by insufficient iterative and grid convergence, especially at high angles of attack. In comparison with the experiment, RANS solutions qualitatively showed the correct configuration buildup trend but underpredicted lift and overpredicted both drag and pitching moment at high angles of attack.

Boris Diskin↗

NASA NTRS1977

Assessment of existing analytic methods for prediction of high angle-of-attack loads on delta wings at supersonic speeds

An assessment of the applicability of four loading prediction methods to high angle-of-attack conditions for simplified wing-body configurations is provided. The methods are: The tangent wedge approximation, the linear theory methods of Middleton and Woodward, and a shock-fitting finite-difference technique. Estimates obtained by these methods were compared with experimental pressure data on delta wings to examine the effects of Mach number, camber, sweep angle, and angle of attack. Results indicate that all of the methods provided reasonable estimates at moderate angles of attack. At these moderate angles of attack, the methods of Middleton and Woodward provided good estimates at Mach numbers higher than those usually associated with linear theory. Only the finite-difference method provided reasonable load estimates at high angles of attack.

Landrum, E. J.↗

NASA NTRS1984

Trends in computational capabilities for fluid dynamics

Milestones in the development of computational aerodynamics are reviewed together with past, present, and future computer performance (speed and memory) trends. Factors influencing computer performance requirements for both steady and unsteady flow simulations are identified. Estimates of computer speed and memory that are required to calculate both inviscid and viscous, steady and unsteady flows about airfoils, wings, and simple wing body configurations are presented and compared to computer performance which is either currently available, or is expected to be available before the end of this decade. Finally, estimates of the amounts of computer time that are required to determine flutter boundaries of airfoils and wings at transonic Mach numbers are presented and discussed.

Peterson, V. L.↗

NASA NTRS1985

Trends in computational capabilities for fluid dynamics

Peterson, V. L.↗

NASA NTRS2019

Update on the Juncture Flow PIV Results and Future Plans

A novel, embedded, 2D Particle Image Velocimetry system has been developed and implemented to obtain off-body velocity measurements in the junction of an 8% wing-body configuration in the NASA Langley Research Center 14- by 22-Foot Subsonic Tunnel. Although the initial purpose for implementing the system during this test was to evaluate system performance and identify potential risks, a considerable amount of data were obtained in the wing-fuselage junction near the trailing edge at a Reynolds Number of 2.4 Million and angle of attack of 5 degrees. In addition to providing notable efficiencies with regard to image acquisition and test operations, the PIV system captured unique details of the flow separation to complement the extensive suite of measurement techniques applied during the test. Instantaneous PIV vector fields reveal that the flow separation is not stationary but rather highly dynamic. Mean flow statistics calculated from the PIV measurements highlight where reverse flow and Reynolds stresses are concentrated in the separated region and agree well with results from the embedded Laser Doppler Velocimeter system and Computational Fluid Dynamics. The comparisons and ional insight gained during this effort will help guide system improvements for the upcoming entry in 2020.

Jenkins, Luther N.↗

NASA NTRS1992

Subsonic investigations of vortex interaction control for enhanced high-alpha aerodynamics of a chine forebody/Delta wing configuration

A proposed concept to alleviate high alpha asymmetry and lateral/directional instability by decoupling of forebody and wing vortices was studied on a generic chine forebody/ 60 deg. delta configuration in the NASA Langley 7 by 10 foot High Speed Tunnel. The decoupling technique involved inboard leading edge flaps of varying span and deflection angle. Six component force/moment characteristics, surface pressure distributions and vapor-screen flow visualizations were acquired, on the basic wing-body configuration and with both single and twin vertical tails at M sub infinity = 0.1 and 0.4, and in the range alpha = 0 to 50 deg and beta = -10 to +10 degs. Results are presented which highlight the potential of vortex decoupling via leading edge flaps for enhanced high alpha lateral/directional characteristics.

Rao, Dhanvada M.↗

NASA NTRS1957

Comparison of calculated and experimental load distributions on thin wings at high subsonic and sonic speeds

A method for calculating the aerodynamic loading on a wing in combination with a body is presented. Calculated results are compared with experimentally measured data for two wing-body configurations throughout a range of Mach number up to 1.0. The magnitude and the distribution of spanwise loading of the calculated data are generally in good agreement with the experimental data.

WINGS, COMPLETE - THEORY↗

NASA NTRS1993

Fluid-structural interactions using Navier-Stokes flow equations coupled with shell finite element structures

A computational procedure is presented to study fluid-structural interaction problems for three-dimensional aerospace structures. The flow is modeled using the three-dimensional unsteady Euler/Navier-Stokes equations and solved using the finite-difference approach. The three dimensional structure is modeled using shell/plate finite-element formulation. The two disciplines are coupled using a domain decomposition approach. Accurate procedures both in time and space are developed to combine the solutions from the flow equations with those of the structural equations. Time accuracy is maintained using aeroelastic configuration-adaptive moving grids that are computed every time step. The work done by aerodynamic forces due to structural deformations is preserved using consistent loads. The present procedure is validated by computing the aeroelastic response of a wing and comparing with experiment. Results are illustrated for a typical wing-body configuration.

Guruswamy, Guru P.↗

NASA NTRS2019

Flow-Field Measurements in a Wing-Fuselage Junction Using an Embedded Particle Image Velocimetry System

A novel, embedded, 2D Particle Image Velocimetry system has been developed and implemented to obtain off-body velocity measurements in the junction of an 8% wing-body configuration in the NASA Langley Research Center 14- by 22-Foot Subsonic Tunnel. Although the initial purpose for implementing the system during this test was to evaluate system performance and identify potential risks, the system worked remarkably well and a considerable amount of data were obtained in the wing-fuselage junction near the trailing edge at a Reynolds Number of 2.4 Million and angle of attack of 5 degrees. In addition to providing notable efficiencies with regard to image acquisition and test operations, the PIV system proved to be quite capable of capturing unique details of the flow separation to complement the extensive suite of measurement techniques applied during the test. Instantaneous PIV vector fields reveal that the flow separation is not stationary but rather highly dynamic. Mean flow statistics calculated from the PIV measurements highlight where reverse flow and Reynolds stresses are concentrated in the separated region and agree well with results from the embedded Laser Doppler Velocimeter system and Computational Fluid Dynamics. The comparisons and additional insight gained during this effort will help guide system improvements for follow-on tests.

Jenkins, Luther N.↗

NASA NTRSDate not supplied

USM3D-ME Solutions for RANS Test Suite of High-Fidelity CFD Verification Workshop 2024

USM3D-ME solutions for the High-Fidelity CFD Verification Workshop 2024 are presented. Solutions are computed for the Reynolds-Averaged Navier-Stokes equations using the Spalart-Allmaras one equation turbulence model, SA-neg-QCR2000-R, that is enhanced with a nonlinear correction to the turbulence stresses and a correction for flow rotation. USM3D-ME solutions have been computed for the three verification cases, namely, a Joukowski airfoil, a subsonic three-dimensional flow around an extruded NACA 0012 wing in tunnel, and subsonic flow around a high-lift wing-body configuration. Iterative convergence of USM3D-ME solutions on several grids within various grid families is demonstrated. Grid convergence of integrated forces, pitching moment and sectional variations of surface pressure and skin friction are also presented.

CFD↗