Results for “Wireless sensor” — Page 11

NASA NTRS2019

Marsbee - Swarm of Flapping Wing Flyers for Enhanced Mars Exploration: NASA Innovative Advanced Concepts (NIAC) - Phase I: Final Report

Mars exploration has received significant interest from academia, industry, government, and the general public. Despite continued interest, flying on Mars remains challenging, mainly due to the ultra-thin Martian atmospheric density. Although the gravitational acceleration on Mars is 38 percent of Earth's 9.8 meters per second squared, the Martian atmospheric density is only 1.3 percent of the air density on Earth. The aerodynamic forces are proportional to the ambient fluid density. Therefore, flying near the surface of Mars has been considered nearly impossible. The proposed mission architecture (Fig. 1) consists of a Mars rover (already existing) that serves as a mobile base for Marsbees - a deployable swarm of small bio-inspired flapping wing vehicles. In one ConOps scenario, each Marsbee would carry an integrated stereographic video camera and the swarm could construct a 3D topographic map of the local surface for rover path planning. These flying scouts would provide a "third-dimension" to the rover capabilities. In other scenarios, each part of the swarm of Marsbees could carry pressure and temperature sensors for atmospheric sampling, or small spectral analyzers for identification of mineral outcroppings. In each scenario, the rover acts as a recharging and deployment/return station and data and communication hub. Human exploration of Mars is one of the major objectives of NASA and commercial entities such as SpaceX and Boeing. The identified innovations unique to the bio-inspired flapping Marsbee provide viable multi-mode flying mobility for Martian atmospheric and terrain exploration. A swarm of Marsbees provides an enhanced reconfigurable Mars exploration system that is resilient to individual component failures. These Marsbees can carry sensors and wireless communication devices in combination with a Mars rover and helicopters. These enhanced sensing and information gathering abilities can contribute to the following NASA Mars mission objectives: i) "Determine the habitability of an environment", ii) "Obtain surface weather measurements to validate global atmospheric models", and iii) "Prepare for human exploration on Mars." Various commercial entities, e.g. SpaceX and Boeing, are investing in technologies to transport humans to Mars.

Kang, Chang-kwon↗

NASA NTRSDate not supplied

TPSAS-NF1676L-12156-DND

The IVHM project recommends nine priorities for future IVHM research. Strain measurement technology is one of the nine recommendations. The Decadal Survey of Civil Aeronautics: Foundation for the Future, identified IVHM as the top NASA and national priority within the area of materials and structures. The survey also identified IVHM systems that warrant attention over the next decade such as “locally self-powered, wireless microelectromechanical sensors of various types tiny enough that very large numbers of sensors become practical.” Standard strain gages have been used to detect cracks in aircraft, and have been used to monitor load conditions and fatigue in airframes. High temperature devices will be able to monitor structural health in areas that are inaccessible today.

Cy Wilson↗

DOE OSTI2025

Output Current Estimation and Control in Primary Side LCC Secondary Side Series Compensated Wireless Power Transfer System without Secondary Side Sensors

The estimation (and control) of the output variables is often challenging for wireless power transfer (WPT) systems. This paper presents a secondary side sensor-less closed loop estimation technique to estimate the output current in a primary side LCC and secondary side series compensated WPT system. Using information of primary side variables, the proposed estimation can estimate the output current over a wide range of load current variations. Results are presented to verify the efficacy of the proposed estimation.

Mukherjee, Subho [ORNL] (ORCID:0009000672297925)↗

NASA NTRS2010

Wireless Instrumentation Use on Launch Vehicles

This slide presentation reviews the results of a study on the use of wireless instrumentation and sensors on future launch vehicles. The use of wireless technologies would if feasible would allow for fewer wires, and allow for more flexibility. However, it was generally concluded that wireless solutions are not currently ready to replace wired technologies for launch vehicles. The recommendations of the study were to continue to use wired sensors as the primary choice for vehicle instrumentation, and to continue to assess needs and use wireless instrumentation where appropriate. The future work includes support efforts for wireless technologies, and continue to monitor the development of wireless solutions.

Sherman, Aaron↗

NASA NTRS2001

Monitoring of bacteria growth using a wireless, remote query resonant-circuit sensor: application to environmental sensing

A new technique is presented for in-vivo remote query measurement of the complex permittivity spectra of a biological culture solution. A sensor comprised of a printed inductor-capacitor resonant-circuit is placed within the culture solution of interest, with the impedance spectrum of the sensor measured using a remotely located loop antenna; the complex permittivity spectra of the culture is calculated from the measured impedance spectrum. The remote query nature of the sensor platform enables, for example, the in-vivo real-time monitoring of bacteria or yeast growth from within sealed opaque containers. The wireless monitoring technique does not require a specific alignment between sensor and antenna. Results are presented for studies conducted on laboratory strains of Bacillus subtilis, Escherichia coli JM109, Pseudomonas putida and Saccharomyces cerevisiae.

Non-NASA Center↗

NASA NTRS2008

Wearable Wireless Telemetry System for Implantable BioMEMS Sensors

Telemetry systems of a type that have been proposed for the monitoring of physiological functions in humans would include the following subsystems: Surgically implanted or ingested units that would comprise combinations of microelectromechanical systems (MEMS)- based sensors [bioMEMS sensors] and passive radio-frequency (RF) readout circuits that would include miniature loop antennas. Compact radio transceiver units integrated into external garments for wirelessly powering and interrogating the implanted or ingested units. The basic principles of operation of these systems are the same as those of the bioMEMS-sensor-unit/external-RFpowering- and-interrogating-unit systems described in "Printed Multi-Turn Loop Antennas for Biotelemetry" (LEW-17879-1) NASA Tech Briefs, Vol. 31, No. 6 (June 2007), page 48, and in the immediately preceding article, "Hand-Held Units for Short-Range Wireless Biotelemetry" (LEW-17483-1). The differences between what is reported here and what was reported in the cited prior articles lie in proposed design features and a proposed mode of operation. In a specific system of the type now proposed, the sensor unit would comprise mainly a capacitive MEMS pressure sensor located in the annular region of a loop antenna (more specifically, a square spiral inductor/ antenna), all fabricated as an integral unit on a high-resistivity silicon chip. The capacitor electrodes, the spiral inductor/antenna, and the conductor lines interconnecting them would all be made of gold. The dimensions of the sensor unit have been estimated to be about 110.4 mm. The external garment-mounted powering/ interrogating unit would include a multi-turn loop antenna and signal-processing circuits. During operation, this external unit would be positioned in proximity to the implanted or ingested unit to provide for near-field, inductive coupling between the loop antennas, which we have as the primary and secondary windings of an electrical transformer.

Simons, Rainee N.↗

NASA NTRS2010

Emergent Adaptive Noise Reduction from Communal Cooperation of Sensor Grid

In the last decade, the realization of small, inexpensive, and powerful devices with sensors, computers, and wireless communication has promised the development of massive sized sensor networks with dense deployments over large areas capable of high fidelity situational assessments. However, most management models have been based on centralized control and research has concentrated on methods for passing data from sensor devices to the central controller. Most implementations have been small but, as it is not scalable, this methodology is insufficient for massive deployments. Here, a specific application of a large sensor network for adaptive noise reduction demonstrates a new paradigm where communities of sensor/computer devices assess local conditions and make local decisions from which emerges a global behaviour. This approach obviates many of the problems of centralized control as it is not prone to single point of failure and is more scalable, efficient, robust, and fault tolerant

Jones, Kennie H.↗

NASA NTRS2007

1st Order Modeling of a SAW Delay Line using MathCAD(Registered)

To aid in the development of SAW sensors for Integrated Vehicle Health Monitoring applications, a first order model of a SAW Delay line has been created using MathCadA. The model implements the Impulse Response method to calculate the frequency response, impedance, and insertion loss. This paper presents the model and the results from the model for a SAW delay line design. Integrated Vehicle Health Monitoring (IVHM) of aerospace vehicles requires rugged sensors having reduced volume, mass, and power that can be used to measure a variety of phenomena. Wireless systems are preferred when retro-fitting sensors onto existing vehicles [1]. Surface Acoustic Wave (SAW) devices are capable of sensing: temperature, pressure, strain, chemical species, mass loading, acceleration, and shear stress. SAW technology is low cost, rugged, lightweight, and extremely low power. Passive wireless sensors have been developed using SAW technology. For these reasons new SAW sensors are being investigated for aerospace applications.

Wilson, William C.↗

NASA NTRS2017

Individually Identifiable Surface Acoustic Wave Sensors, Tags and Systems

A surface-launched acoustic wave sensor tag system for remotely sensing and/or providing identification information using sets of surface acoustic wave (SAW) sensor tag devices is characterized by acoustic wave device embodiments that include coding and other diversity techniques to produce groups of sensors that interact minimally, reducing or alleviating code collision problems typical of prior art coded SAW sensors and tags, and specific device embodiments of said coded SAW sensor tags and systems. These sensor/tag devices operate in a system which consists of one or more uniquely identifiable sensor/tag devices and a wireless interrogator. The sensor device incorporates an antenna for receiving incident RF energy and re-radiating the tag identification information and the sensor measured parameter(s). Since there is no power source in or connected to the sensor, it is a passive sensor. The device is wirelessly interrogated by the interrogator.

Hines, Jacqueline H.↗

NASA NTRS2003

Concepts and Development of Bio-Inspired Distributed Embedded Wired/Wireless Sensor Array Architectures for Acoustic Wave Sensing in Integrated Aerospace Vehicles

This paper discusses the modeling of acoustic emissions in plate structures and their sensing by embedded or surface bonded piezoelectric sensor arrays. Three different modeling efforts for acoustic emission (AE) wave generation and propagation are discussed briefly along with their advantages and disadvantages. Continuous sensors placed at right angles on a plate are being discussed as a new approach to measure and locate the source of acoustic waves. Evolutionary novel signal processing algorithms and bio-inspired distributed sensor array systems are used on large structures and integrated aerospace vehicles for AE source localization and preliminary results are presented. These systems allow for a great reduction in the amount of data that needs to be processed and also reduce the chances of false alarms from ambient noises. It is envisioned that these biomimetic sensor arrays and signal processing techniques will be useful for both wireless and wired sensor arrays for real time health monitoring of large integrated aerospace vehicles and earth fixed civil structures. The sensor array architectures can also be used with other types of sensors and for other applications.

Ghoshal, Anindya↗

NASA NTRSDate not supplied

Flight Test Configuration of the Sensor Payload and the Ground Nodes in Distributed Sensing Frameworks

The realization of the Urban Air Mobility (UAM) vision, entailing the deployment of high-density autonomous flights over urban areas, necessitates methodologies transcending contemporary airborne sensing techniques. An instrumental innovation in this realm is the advent of distributed sensing. In this paradigm, environmental sensors function as active agents, engaging in the triad of sensing, processing, and communication either amongst themselves, with ground stations, or both. This concerted effort creates a dynamic and responsive "smart space," facilitating real-time autonomous control. NASA Ames Research Center is actively engaged in a series of comprehensive indoor and outdoor flight tests to garner requisite data and insights essential for the actualization of this ambitious vision. This paper delineates the holistic configuration of the flight payload and the distributed ground nodes pivotal to the NASA flight test campaign. Furthermore, it expounds upon the intricacies of the sensor node communication framework. The narrative extends to provide a detailed overview of the strategic placement of distributed sensors and a comprehensive account of the varied indoor and outdoor flight tests orchestrated in pursuit of UAM objectives.

urban air mobility↗

NASA NTRSDate not supplied

Flight Test Configuration of the Sensor Payload and the Ground Nodes in Distributed Sensing Frameworks

The realization of the Urban Air Mobility (UAM) vision, entailing the deployment of high-density autonomous flights over urban areas, necessitates methodologies transcending contemporary airborne sensing techniques. An instrumental innovation in this realm is the advent of distributed sensing. In this paradigm, environmental sensors function as active agents, engaging in the triad of sensing, processing, and communication either amongst themselves, with ground stations, or both. This concerted effort creates a dynamic and responsive "smart space," facilitating real-time autonomous control. NASA Ames Research Center is actively engaged in a series of comprehensive indoor and outdoor flight tests to garner requisite data and insights essential for the actualization of this ambitious vision. This paper delineates the holistic configuration of the flight payload and the distributed ground nodes pivotal to the NASA flight test campaign. Furthermore, it expounds upon the intricacies of the sensor node communication framework. The narrative extends to provide a detailed overview of the strategic placement of distributed sensors and a comprehensive account of the varied indoor and outdoor flight tests orchestrated in pursuit of UAM objectives.

urban air mobility↗

DOE OSTI2025

xGFabric: Coupling Sensor Networks and HPC Facilities with Private 5G Wireless Networks for Real-Time Digital Agriculture

Advanced scientific applications require coupling distributed sensor networks with centralized high-performance computing facilities. Citrus Under Protective Screening (CUPS) exemplifies this need in digital agriculture, where citrus research facilities are instrumented with numerous sensors monitoring environmental conditions and detecting protective screening damage. CUPS demands access to computational fluid dynamics codes for modeling environmental conditions and guiding real-time interventions like water application or robotic repairs. These computing domains have contrasting properties: sensor networks provide low-performance, limited-capacity, unreliable data access, while high-performance facilities offer enormous computing power through high-latency batch processing. Private 5G networks present novel capabilities addressing this challenge by providing low latency, high throughput, and reliability necessary for near-real-time coupling of edge sensor networks with HPC simulations. This work presents xGFabric, an end-to-end system coupling sensor networks with HPC facilities through Private 5G networks. The prototype connects remote sensors via 5G network slicing to HPC systems, enabling real-time digital agriculture simulation.

Digital Agriculture↗

NASA NTRS2006

Wireless augmented reality communication system

The system of the present invention is a highly integrated radio communication system with a multimedia co-processor which allows true two-way multimedia (video, audio, data) access as well as real-time biomedical monitoring in a pager-sized portable access unit. The system is integrated in a network structure including one or more general purpose nodes for providing a wireless-to-wired interface. The network architecture allows video, audio and data (including biomedical data) streams to be connected directly to external users and devices. The portable access units may also be mated to various non-personal devices such as cameras or environmental sensors for providing a method for setting up wireless sensor nets from which reported data may be accessed through the portable access unit. The reported data may alternatively be automatically logged at a remote computer for access and viewing through a portable access unit, including the user's own.

Devereaux, Ann↗

NASA NTRS2014

Wireless Augmented Reality Communication System

The system of the present invention is a highly integrated radio communication system with a multimedia co-processor which allows true two-way multimedia (video, audio, data) access as well as real-time biomedical monitoring in a pager-sized portable access unit. The system is integrated in a network structure including one or more general purpose nodes for providing a wireless-to-wired interface. The network architecture allows video, audio and data (including biomedical data) streams to be connected directly to external users and devices. The portable access units may also be mated to various non-personal devices such as cameras or environmental sensors for providing a method for setting up wireless sensor nets from which reported data may be accessed through the portable access unit. The reported data may alternatively be automatically logged at a remote computer for access and viewing through a portable access unit, including the user's own.

Devereaux, Ann↗

NASA NTRS2014

Wireless Augmented Reality Communication System

The system of the present invention is a highly integrated radio communication system with a multimedia co-processor which allows true two-way multimedia (video, audio, data) access as well as real-time biomedical monitoring in a pager-sized portable access unit. The system is integrated in a network structure including one or more general purpose nodes for providing a wireless-to-wired interface. The network architecture allows video, audio and data (including biomedical data) streams to be connected directly to external users and devices. The portable access units may also be mated to various non-personal devices such as cameras or environmental sensors for providing a method for setting up wireless sensor nets from which reported data may be accessed through the portable access unit. The reported data may alternatively be automatically logged at a remote computer for access and viewing through a portable access unit, including the user's own.

Devereaux, Ann↗

NASA NTRS2016

Wireless Augmented Reality Communication System

The system of the present invention is a highly integrated radio communication system with a multimedia co-processor which allows true two-way multimedia (video, audio, data) access as well as real-time biomedical monitoring in a pager-sized portable access unit. The system is integrated in a network structure including one or more general purpose nodes for providing a wireless-to-wired interface. The network architecture allows video, audio and data (including biomedical data) streams to be connected directly to external users and devices. The portable access units may also be mated to various non-personal devices such as cameras or environmental sensors for providing a method for setting up wireless sensor nets from which reported data may be accessed through the portable access unit. The reported data may alternatively be automatically logged at a remote computer for access and viewing through a portable access unit, including the user's own.

Devereaux, Ann↗

NASA NTRS2009

A Noninvasive Miniaturized-Wireless Laser-Doppler Fiber-Optic Sensor for Understanding Distal Fingertip Injuries in Astronauts

During extra-vehicular activities (EVAs) or spacewalks astronauts over use their fingertips under pressure inside the confined spaces of gloves/space suits. The repetitive hand motion is a probable cause for discomfort and injuries to the fingertips. We describe a new wireless fiber-optic probe that can be integrated inside the astronaut glove for noninvasive blood perfusion measurements in distal fingertips. In this preliminary study, we present blood perfusion measurements while performing hand-grip exercises simulating the use of space tools.

Ansari, Rafat R.↗