SEARCH · Search NASA

Results for “X-Band”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

All sources NASA NTRS DOE OSTI

NASA NTRS1980

The use of radar and LANDSAT data for mineral and petroleum exploration in the Los Andes region, Venezuela

A geological study of a 27,500 sq km area in the Los Andes region of northwestern Venezuela was performed which employed both X-band radar mosaics and computer processed Landsat images. The 3.12 cm wavelength radar data were collected with horizontal-horizontal polarization and 10 meter spatial resolution by an Aeroservices SAR system at an altitude of 12,000 meters. The radar images increased the number of observable suspected fractures by 27 percent over what could be mapped by LANDSAT alone, owing mostly to the cloud cover penetration capabilities of radar. The approximate eight fold greater spatial resolution of the radar images made possible the identification of shorter, narrower fractures than could be detected with LANDSAT data alone, resulting in the discovery of a low relief anticline that could not be observed in LANDSAT data. Exploration targets for petroleum, copper, and uranium were identified for further geophysical work.

Vincent, R. K.↗

NASA NTRS1980

Side-looking airborne radar image interpretation and geological mapping: Problems and results

Geological experiments and surveys conducted by BRGM and GDTA members to evaluate interest in SLAR image interpretation are summarized. Two surveys were selected for presentation: Les Vans (Massif central, France) and Guyana (South America). They have permitted a comparison between different types of SLAR: Goodyear, Motorola, JPL, and Vigie in term of lithological and structural applications. On the Les Vans test site conclusions reached concern radiometry, which is better on L-band imagery, polarization, HV being more useful than HH for geological mapping in an L-band system, wavelength and illuminations. Over Guyana, the use of Goodyear X-band SLAR enables satisfactory geological and structural mapping under heavy equatorial forest with cloud cover conditions. A differential program was developed for fracture filtering and image enhancement with a coherent light laser, and significant results were obtained.

Scanvic, J. Y.↗

NASA NTRS1980

Active retrodirective arrays for SPS beam pointing

The basic requirement of the SPS beam pointing system is that it deliver a certain amount of S-band (lambda = 12.5 cm) power to a 9.6 km diameter receiving rectenna on the ground. The power is transmitted from a 1.0 km diameter antenna array on the SPS, which is, for a rectenna at about plus or minus 40 deg. latitude, some 37.5x10 to the 6th power km distant. At the present time ARA's appear to be the best bet to realize this very stringent beam pointing requirement. An active retrodirective array (ARA) transmits a beam towards the apparent source of an illuminating signal called the pilot. The array produces, not merely reflects, RF power. Retrodirectivity is achieved by retransmitting from each element of the array a signal whose phase is the "conjugate" of that received by the element. Phase conjugate circuits and pointing errors in ARA's are described. Results obtained using a 2-element X-band ARA and an 8-element S-band ARA are included.

Chernoff, R.↗

NASA NTRS1980

An analysis of source structure effects in radio interferometry measurements

To begin a study of structure effects, this report presents a theoretical framework, proposes an effective position approach to structure corrections based on brightness distribution measurements, and analyzes examples of analytical and measured brightness distributions. Other topics include the effect of the frequency dependence of a brightness distribution on bandwidth synthesis (BWS) delay, the determination of the absolute location of a measured brightness distribution, and structure effects in dual frequency calibration of charged particle delays. For the 10 measured distributions analyzed, it was found that the structure effect in BWS delay at X-band (3.6 cm) can reach 30 cm, but typically falls in the range of 0 to 5 cm. A trial limit equation that is dependent on visibility was successfully tested against the 10 measured brightness distributions (seven sources). If the validity of this particular equation for an upper limit can be established for nearly all sources, the structure effect in BWS delay could be greatly reduced without supplementary measurements of brightness distributions.

Thomas, J. B.↗

NASA NTRS1981

Station stability measurement

Methods and instrumentation are being developed to determine the frequency stability of Deep Space Stations. The efforts are presently focused on the verification of the stability of the X-band uplink and other RF and microwave subsystems which contribute to the overall stability of the system. The measurement methodology is presented as well as frequency stability data generated with the development measurement system. The system characteristics are highlighted and the potential areas where improvements could be made are discussed.

Sosa, E. N.↗

NASA NTRS1981

Second-generation X/S feedcone: Capabilities layout, and components

High power (20 kW) S and X-band transmitting systems were added to the Second Generation Common Aperture X/S Feedcone System to demonstrate X and S band uplink/downlink capabilities. Design considerations of new X band components, cone layout, and capabilities are discussed.

Withington, J. R.↗

NASA NTRS1981

An experimental study of the concatenated Reed-Solomon/Viterbi channel coding system performance and its impact on space communications

The need for efficient space communication at very low bit error probabilities to the specification and implementation of a concatenated coding system using an interleaved Reed-Solomon code as the outer code and a Viterbi-decoded convolutional code as the inner code. Experimental results of this channel coding system are presented under an emulated S-band uplink and X-band downlink two-way space communication channel, where both uplink and downlink have strong carrier power. This work was performed under the NASA End-to-End Data Systems program at JPL. Test results verify that at a bit error probability of 10 to the -6 power or less, this concatenated coding system does provide a coding gain of 2.5 dB or more over the Viterbi-decoded convolutional-only coding system. These tests also show that a desirable interleaving depth for the Reed-Solomon outer code is 8 or more. The impact of this "virtually" error-free space communication link on the transmission of images is discussed and examples of simulation results are given.

Liu, K. Y.↗

NASA NTRS1980

Passive microwave remote sensing of soil moisture - The effect of tilled row structure

The tilled row structure in agricultural fields is one of the important factors affecting observations of microwave emission from such fields. Measurements of this effect were performed with L-band and X-band radiometers mounted on a mobile truck on a bare 40 m x 45 m row tilled field; the soil moisture content during measurements ranged from 10 to 30% by dry weight. Results showed that the variations of the antenna temperatures with incident angle changed with the azimuth angle measured from the row direction. It is found that the observed difference between horizontally and vertically polarized antenna temperatures is due to the change in the local angle of field emission within the antenna field of view caused by the large-scale row structure.

Wang, J. R.↗

NASA NTRS1981

Surface resistivity measurements of candidate subreflector surfaces

Subreflectors on DSN antennas have historically been of formed and welded sheet metal construction, which is quite costly. Flame-spray metallized fiberglass-epoxy offers an alternative technique at much lower cost. Results of a study to show that system noise temperature would be increased about 0.3 K at X-band when using the alternate material is presented.

Thom, E. H.↗

NASA NTRS1982

On the group delay effect of DSN microwave components on multimegabit telemetry

When the gain and phase shift characteristics of the overall system between the modulator and demodulator are given, the group delay effect for the intended data rate can be assessed by examining the equation for the recovered signal for several rectangular pulse inputs with different duty cycles. For example, the group delay loss of 30 Mbit/sec telemetry with only a Block II X-band maser is less than 0.2 dB even with a 10-MHz center frequency offset.

Lee, P. J.↗

NASA NTRS1982

A note on deep space optical communication link parameters

Topical communication in the context of a deep space communication link. Communication link analysis at the optical frequencies differs significantly from that at microwave frequencies such as the traditional S and X-bands used in deep space applications, due to the different technology of transmitter, antenna, modulators, and receivers. In addition, the important role of quantum noise in limiting system performance is quite different than that of thermal noise. The optical link design is put in a design control table format similar to a microwave telecom link design. Key considerations unique to the optical link are discussed.

Dolinar, S. J.↗

NASA NTRS1981

Radar imagery for forest cover mapping

Dual-polarized, X-band Synthetic Aperture Radar (SAR) imagery was obtained from an altitude of 60,000 feet over a test area near Camden, SC on June 30, 1980. The objective of this study was to determine, qualitatively, the value of the SAR imagery for identifying various forest cover types. In analyzing the HH and HV polarization images, particular attention was given to the tonal and textural characteristics of the cover types involved. The analysis of the dual-polarized SAR imagery has shown that certain forest cover features are more easily identified in one polarization than the other, while some features look very similar in both polarizations. In general, the results for this data set have shown that the overall tonal contrast between features was greater on the HH image. Neither polarization was consistently better for identifying the various forest cover types examined. These results suggest the usefulness of a dual-polarized SAR system for mapping forest cover.

Knowlton, D. J.↗

NASA NTRS1981

SP mountain data analysis

An analysis of synthetic aperture radar data of SP Mountain was undertaken to demonstrate the use of digital image processing techniques to aid in geologic interpretation of SAR data. These data were collected with the ERIM X- and L-band airborne SAR using like- and cross-polarizations. The resulting signal films were used to produce computer compatible tapes, from which four-channel imagery was generated. Slant range-to-ground range and range-azimuth-scale corrections were made in order to facilitate image registration; intensity corrections were also made. Manual interpretation of the imagery showed that L-band represented the geology of the area better than X-band. Several differences between the various images were also noted. Further digital analysis of the corrected data was done for enhancement purposes. This analysis included application of an MSS differencing routine and development of a routine for removal of relief displacement. It was found that accurate registration of the SAR channels is critical to the effectiveness of the differencing routine. Use of the relief displacement algorithm on the SP Mountain data demonstrated the feasibility of the technique.

Rawson, R. F.↗

NASA NTRS1979

Evaluation of SLAR and thematic mapper MSS data for forest cover mapping using computer-aided analysis techniques

A literature review on radar and spectral band information was conducted and a NC-130 mission was flown carrying the NS001 scanner system which basically corresponds to the channel configuration of the proposed thematic mapper. Aerial photography and other reference data were obtained for the study site, an area approximately 290 sq miles in north central South Carolina. A cover type map was prepared and methods were devised for reformatting and geometrically correcting MSS CRT data. Arrangements were made to obtain LANDSAT data for dates approximating the NC-130 mission. Because of the waveband employed to obtain SEASAT radar data, it was decided to determine if X-band (2.40 cm to 3.75 cm wavelength) imagery is available.

Hoffer, R. M.↗

NASA NTRS1979

Full scale LANDSAT-D antenna pattern measurements

The design verification of the LANDSAT-D antenna subsystem is addressed. In particular, the analysis of the antenna radiation patterns utilizing a full scale mockup of the LANDSAT-D satellite is discussed. Test antennas included two S-Band shaped beam antennas, two S-Band omni unit radiators (to operate in array), a GPS antenna, an X-Band shaped beam antenna, and one S-Band high-gain parabolic antenna.

Source record↗

NASA NTRS1981

Geological terrain models

The initial phase of a program to determine the best interpretation strategy and sensor configuration for a radar remote sensing system for geologic applications is discussed. In this phase, terrain modeling and radar image simulation were used to perform parametric sensitivity studies. A relatively simple computer-generated terrain model is presented, and the data base, backscatter file, and transfer function for digital image simulation are described. Sets of images are presented that simulate the results obtained with an X-band radar from an altitude of 800 km and at three different terrain-illumination angles. The simulations include power maps, slant-range images, ground-range images, and ground-range images with statistical noise incorporated. It is concluded that digital image simulation and computer modeling provide cost-effective methods for evaluating terrain variations and sensor parameter changes, for predicting results, and for defining optimum sensor parameters.

Kaupp, V. H.↗

NASA NTRS1981

The early 1981 view of Landsat-D progress

The thematic mapper (TM) will provide a spatial resolution (30 m) higher than the radiometric observations provided from Landsats 1 through 3 (80 m); what is more, observations in new spectral bands (0.45 to 0.52, 1.55 to 1.75, and 2.08 to 2.35 microns) will be available. These characteristics will aid in identifying and assessing the acreage and condition of crops. Further advantages will be offered in mineral exploration and land resource assessment. In describing the flight segment, it is noted that the high-gain antenna (diameter, 6 ft) will be used to communicate with the Tracking and Data Relay Satellite System in the Ku-band (15 GHz). Direct transmission of TM data will be provided by the X-band antenna. The MSS data will be transmitted directly to foreign stations by the S-band antenna. A figure describing the Multimission Modular spacecraft is included.

Salomonson, V. V.↗

NASA NTRS1996

Science Results from the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR): Progress Report

The Spaceborne Imaging Radar-C/X-band Synthetic Aperture Radar (SIR-C/X-SAR) is the most advanced imaging radar system to fly in Earth orbit. Carried in the cargo bay of the Space Shuttle Endeavour in April and October of 1994, SIR-C/X-SAR simultaneously recorded SAR data at three wavelengths (L-, C-, and X-bands; 23.5, 5.8, and 3.1 cm, respectively). The SIR-C/X-SAR Science Team consists of 53 investigator teams from more than a dozen countries. Science investigations were undertaken in the fields of ecology, hydrology, ecology, and oceanography. This report contains 44 investigator team reports and several additional reports from coinvestigators and other researchers.

Diane L Evans↗