Search NASA⌕ Search

SEARCH · Search NASA

Results for “absorption band”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Spontaneous Formation of Single-Crystalline Spherulites in a Chiral 2D Hybrid Perovskite

In two-dimensional (2D) chiral metal-halide perovskites (MHPs), chiral organic spacers induce structural chirality and chiroptical properties in the metal-halide sublattice. This structural chirality enables reversible crystalline-glass phase transitions in (S-NEA) 2 PbBr 4 , a prototypical chiral 2D MHP where NEA + represents 1-(1-naphthyl)ethylammonium. Here, in this study, we investigate two distinct spherulite states of (S-NEA) 2 PbBr 4 , exhibiting either radial-like or stripe-like banded patterns depending on the annealing conditions of the amorphous film. Despite similarities in optical absorption and photoluminescence, the stripe-like, banded spherulite exhibits higher crystallinity and improved optical transparency compared to those of radial-like spherulite. X-ray nanoprobe measurements reveal tilting-angle modulations in the octahedral plane of stripe-like spherulites, correlating with the film’s surface geometry. Transfer matrix calculations indicate that the optical contrast in stripe-like patterns, seen in bright-field optical microscopy, arises from optical interference effects, differing from the contrast mechanism observed in polymer spherulites. Ultrafast carrier dynamics experiments suggest that the stripe-like spherulites resemble single crystals more closely than radial-like spherulites, while electrical conductivity measurements show enhanced charge carrier transport in stripe-like spherulites. These findings offer insights into MHP spherulite states with a single composition but different morphologies, previously observed only in polymers, highlighting their potential for optoelectronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Mixed-strategy approach to band-edge analysis and modeling in semiconductors

In semiconductor physics, the Urbach rule describes an exponential dependence of the UV-Vis absorption coefficient on photon energy at the band edge. The rule is so ubiquitously applied that a single common mechanism, variability in the local potential, is generally considered to be the cause of exponential band edges. Variability in the local potential may be caused by alloy inhomogeneity, structural defects, impurities, thermal excitation, or any other mechanism that interrupts ideal crystallinity and creates disorder. A crucial point of the Urbach rule is its development for band edges which approach linearity when plotted on a logarithmic scale. The rule was not developed in the context of nonlinear band edges with complex fine structure. Even so, this model has been applied extensively to band edges with such features. Using differential analysis and deconvolution, we develop an analytical technique capable of separating the components responsible for the fine structure observed. This approach reduces challenging signal-artifact convolution problems to a simple linear combination. Furthermore, we develop a model that can be applied to the nonlinear band-edge signals extracted. In this work, we show that in the limiting case of linearity, our model is consistent with and produces the same results as the linear Urbach model. Our model is capable of bypassing “tailing” as an indirect measure of the spread in the local potential and gives a direct measure of this quantity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Absolute Band Intensity of the Iodine Monochloride Fundamental Mode for Infrared Sensing and Quantitative Analysis

Iodine monochloride (ICl) is a gaseous off-product of molten salt reactors; monitoring this heteronuclear diatomic is of great interest for both environmental and safety purposes. In this paper we investigate the possibility of infrared monitoring of ICl by measuring the far-infrared absorption cross section of its fundamental band near 381 cm -1 . We have performed quantitative studies of the neat gas in a 20 cm cell at 25, 35, 50 and 70 oC at multiple pressures up to ~ 9 Torr and investigated the temperature and pressure dependence of the band’s infrared cross section. Quantitative measurements were problematic due to sample adhesion to the cell walls and windows as well as reactions/possible hydrolysis of ICl to form HCl gas. Effects were mitigated by measuring only the neat gas, using short measurement times and subtracting out the partial pressure of the HCl(g). The integrated band strength is shown to be temperature independent and was found to be equal to 9.1 x 10 -19 (cm 2 /molecule) cm-1. As expected, the temperature dependence of the band profile showed only a small effect over this limited temperature range. Furthermore, we have also investigated using the absorption data along with inverse least squares multivariate methods for the quantitative monitoring of ICl effluent concentrations under different scenarios using infrared (standoff) sensing and compare these results with traditional Beer’s Law (univariate) techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Surface Effects on Pyrene Luminescence Excitation

Pyrene is a polycyclic aromatic hydrocarbon with fluorescence in the 370-400 nm range. The optical properties of pyrene deposited on different substrates were investigated from experimental and theoretical points of view. In contrast to prior studies of surface-enhanced fluorescence, in this work all substrates were semiconductors or insulators. Experimentally, the intensity of photoluminescence (PL) and PL excitation (PLE) spectra were investigated. PLE spectra of pyrene’s monomer emission show that the intensities of the two main absorption peaks vary according to the chosen substrate. Here, calculations for pyrene on zinc sulfide (ZnS) and surface-oxidized diamond suggest that this connection arises from the alignment of the pyrene electronic levels relative to the band edges of the substrate. The absorption peak at 272 nm (4.56 eV) is shown to depend on the HOMO-1→LUMO orbital contribution while the 335 nm (3.70 eV) peak depends upon the HOMO→LUMO transition. When the HOMO-1 level falls inside the substrate valence band, as in the case of ZnS, there is significant hybridization of the molecular state with surface states that causes an enhancement of the 272 nm peak. For pyrene on diamond, however, the HOMO-1 level falls in the substrate bandgap, leading to negligible hybridization and thus no enhancement.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

High-resolution rovibrational spectroscopy of trans -formic acid in the v 1 OH stretching fundamental: Dark state coupling and evidence for charge delocalization dynamics

High-resolution infrared (IR) reduced-Doppler absorption spectra of jet-cooled gas phase trans-formic acid in the v 1 OH stretching fundamental region are reported for the first time, obtained by supersonically expanding trans- formic acid/Ar mixtures through a slit jet nozzle source and rotationally cooling to T rot ≈ 10.9(5) K, with ab- sorption signals recorded by high-resolution difference-frequency IR absorption spectroscopy. Two a/b-type rovibrational bands of comparable intensity, one ~10-fold weaker b-type band, and one ~6-fold weaker a-type band are observed, with vibrational band origins at 3570.493(5), 3566.793(5), 3560.032(9), and 3534.6869(2) cm –1 , respectively. Based on previous Raman jet spectroscopic work by Nejad and Sibert [A. Nejad, E.L. Sibert III, The Raman jet spectrum of trans-formic acid and its deuterated isotopologs: Combining theory and experi- ment to extend the vibrational database, J. Chem. Phys. 154(6) (2021) 064301.], these four rovibrational bands have been assigned to v 1 , (v 2 + v 7 ), (v 6 + 2v 7 + 2v 9 ), and 2v 3 , respectively. Specifically, two of the three upper dark states (2 1 7 1 (a') and 6 1 7 2 9 2 (a')) are close enough to the “bright” 1 1 (a') state to facilitate strong anharmonic resonance interactions, which results in intensity mixing into the two zero-order bands that would otherwise be “dark”. Furthermore, our high-resolution spectral analysis reveals that there are local rotational crossings be- tween these zero-order 1 1 and 2 1 7 1 states resulting in extra lines (i.e., some upper levels in the nominally v 1 band have majority zero-order 2 1 7 1 state character). This motivates development of a 3 coupled state (1 1 , 2 1 7 1 , and 6 1 7 2 9 2 ) picture to aid in the spectral analysis, which is able to match all 3 observed band origins and relative band intensities, as well as indicate the necessity of multistate (> 2) coupling. Though limited by range of J and Ka levels (J’ ≤ 9 and K a ’ ≤ 3) populated at supersonic jet temperatures, this work offers first precision spec- troscopic analysis of trans-formic acid in the v 1 OH stretch region, which should aid in assignment of the more complete yet highly congested room temperature FTIR spectra. Lastly, and in sharp contrast to the spectral complexity in the three predominantly b-type bands, the lone a-type 2v 3 rovibrational band at 3534.6869(2) cm –1 is well described by a simple, rigid asymmetric top Hamiltonian.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Effects of Site and Magnetic Disorder on the Oxygen Vacancy Formation and Electronic and Optical Properties of La x Sr 1– x CoO 3–δ and SrFe y Co 1– y O 3–δ [plus supplemental information]

Disorder is an inevitable issue in practical applications of perovskites with the A-site occupied by La/Sr and the B-site occupied by Co/Fe. We performed density functional theory calculations to reveal the site and magnetic disorder effect on the oxygen vacancy formation and the electronic and optical properties of La x Sr 1–x CoO 3–δ and SrFe y Co 1–y O 3–δ systems. Generally, site disorder has little influence on the physical properties we studied, while magnetic disorder has a property-dependent effect for La A-site and Fe B-site doping of SrCoO 3 . Compared to ordered ferromagnetic (FM) calculations, disordered paramagnetic (PM) results can better describe the high-temperature behavior of lattice expansion and the multiple spin states of Co ions in La x Sr 1–x CoO 3 . The oxygen vacancy formation energy results show that the magnetic disorder has a more remarkable effect on SrFe y Co 1–y O 3–δ systems with a robust magnetic order than that on the La x Sr 1–x CoO 3–δ systems with a fragile magnetic order. The electronic structures in the PM phase have less spin polarization and broadened bands, by which the optical absorptions from the single spin channel transition in the FM phase have an obvious change in the magnitude and/or the trend. Furthermore, our work provides guidance for where and why to consider the disorder.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Origin of hydroxyl pair formation on reduced anatase TiO 2 (101)

The interaction of water with metal oxide surfaces is of key importance to several research fields and applications. Because of its ability to photo-catalyze water splitting, reducible anatase TiO 2 (a-TiO 2 ) is of particular interest. Here, we combine experiments and theory to study the dissociation of water on bulk-reduced a-TiO 2 (101). Following large water exposures at room temperature, point-like protrusions appear on the a-TiO 2 (101) surface, as shown by scanning tunneling microscopy (STM). These protrusions originate from hydroxyl pairs, consisting of terminal and bridging OH groups, OH t /OH b , as revealed by infrared reflection absorption spectroscopy (IRRAS) and valence band experiments. Utilizing density functional theory (DFT) calculations, we offer a comprehensive model of the water/a-TiO 2 (101) interaction. In conclusion, this model also explains why the hydroxyl pairs are thermally stable up to ~480 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Time-resolved momentum imaging of UV photodynamics in structural isomers of iodopropane probed by site-selective XUV ionization

The photodynamics of 1- and 2-iodopropane (1 and 2-IP) were studied in a time-resolved scheme incorporating ultraviolet (UV) excitation and extreme ultraviolet (XUV) probing, which initiates photoionization selectively from the I 4d core orbital. UV absorption in the A-band of both isomers leads to prompt C–I bond fission, with significant disposal of internal energy into the propyl radical product. Site-selective ionization enables a range of charge transfer (CT) processes between the nascent highly charged iodine ions and neutral propyl radicals, dependent on the interfragment distance at the instant of ionization. Subtle differences in the dynamics of these CT processes between the two isomers are observed. In 1-IP, the kinetic energies of iodine ions produced by UV photodissociation and subsequent XUV multiple ionization increased notably over the first few hundred femtoseconds, which could be understood in terms of differing gradients along the photodissociation coordinates of the neutral and polycationic states involved in the pump and probe steps, respectively. Led by a recent report of HI elimination in UV photoexcited 2-IP [Todt et al., Phys. Chem. Chem. Phys., 22(46), 27338 (2020)], we also model the most likely signatures of this process in the present experiment, and can identify signal in the 2-IP data (that is absent or significantly weaker in the data from the unbranched 1-IP isomer) that is consistent with such a process occurring on ultrafast timescales.

Allum, Felix [Deutsches Elektronen-Synchrotron (DE↗
DOE OSTI2026

Thin Film Synthesis of SrZn2P2 with SrI2 Post-Annealing for Enhanced Crystallinity and Optoelectronic Quality

Ternary Zintl phosphides are promising light-absorbing semiconductors for thin-film optoelectronic applications, but strategies for controlling their microstructure and optoelectronic quality remain underexplored. Here, we report the synthesis of phase-pure SrZn2P2 thin films using radio-frequency co-sputtering in a PH3 + Ar atmosphere and investigate the impact of post-growth processing on their structural and optical properties. Grazing-incidence X-ray scattering and Raman spectroscopy confirm the formation of crystalline SrZn2P2 films over a finite compositional window. Optical measurements reveal clear absorption near the direct-band-gap energy (~1.8 eV) and near-band-edge photoluminescence. Further, we have studied the effects of chemically compatible halide-assisted annealing. It is found that SrI2 treatments lead to pronounced grain growth and reduced diffraction peak broadening while preserving phase purity, in contrast to rapid thermal or forming-gas annealing. Notably, annealing with SrI2 at 450 degrees C significantly enhances both the intensity and spatial uniformity of the photoluminescence, thus connecting the observed microstructural consolidation with improved radiative recombination. Our study demonstrates that halide-assisted annealing provides an effective pathway for microstructural control in SrZn2P2 thin films and highlights a generalizable processing strategy for advancing Zintl phosphide semiconductors toward optoelectronic applications.

14 SOLAR ENERGY↗
DOE OSTI2024

Intercalation of quaternary ammonium cations as a key factor of electron storage in MoS2 thin films

Electrochemical intercalation of cations within two-dimensional transition metal dichalcogenides presents a promising route for tailoring their optoelectronic properties. We have now succeeded in modulating the optical properties of MoS2 thin films through electrochemical intercalation of quaternary ammonium cations. The spectroelectrochemical experiments conducted with varying sizes of the intercalant revealed the size-dependent stability of the intercalated MoS2 nanosheets. The observed absorption change of the exciton bands is reversible and arises from the storage of electrons in MoS2 nanosheets and the subsequent weakening of interlayer van der Waals interactions following cation intercalation. This structural change is evidenced by the emergence of A*1g out-of-plane Raman mode. Additionally, the photoelectron spectroscopy reveals the emergence of a lower binding energy component of Mo 3d and the shift in Fermi level to higher energies, confirming the presence of stored electrons in cation intercalated-MoS2. The underlying mechanism of intercalation-induced property modifications in MoS2 discussed in the present study is useful in developing strategies for energy conversion devices.

Physics↗
DOE OSTI2022

Photoluminescence of Cis-Polyacetylene Semiconductor Material

Photoluminescence (PL) is one of the key experimental characterizations of optoelectronic materials, including conjugated polymers (CPs). In this study, a simplified model of an undoped cis-polyacetylene (cis-PA) oligomer was selected and used to explain the mechanism of photoluminescence (PL) of the CPs. Using a combination of the ab initio electronic structure and a time-dependent density matrix methodology, the photo-induced time-dependent excited state dynamics were computed. We explored the phonon-induced relaxation of the photoexcited state for a single oligomer of cis-PA. Here, the dissipative Redfield equation of the motion was used to compute the dissipative excited state dynamics of electronic degrees of freedom. This equation used the nonadiabatic couplings as parameters. The computed excited state dynamics showed that the relaxation rate of the electron is faster than the relaxation rate of the hole. The dissipative excited-state dynamics were combined with radiative recombination channels to predict the PL spectrum. The simulated results showed that the absorption and emission spectra both have a similar transition. The main result is that the computed PL spectrum demonstrates two mechanisms of light emission originating from (i) the inter-band transitions, corresponding to the same range of transition energies as the absorption spectrum and (ii) intra-band transitions not available in the absorption spectra. However, the dissipative Redfield equation of the motion was used to compute the electronic degrees of freedom of the nonadiabatic couplings, which helped to process the time propagation of the excited dynamic state. This excited dynamic state shows that the relaxation rate of the electron is faster than the relaxation rate of the hole, which can be used for improving organic semiconductor materials for photovoltaic and LED applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Circularly Polarized Optical Stark Effect in CdSe Colloidal Quantum Wells

Colloidal quantum wells, or nanoplatelets, exhibit large, circularly polarized optical Stark effects under sub-band-gap femtosecond illumination. The optical Stark effect is measured for CdSe colloidal quantum wells of several thicknesses and separately as a measure of pump photon energy, pump fluence, and temperature. These measurements show that optical Stark effects in colloidal quantum wells shift the absorption features up to 5 meV, at the intensities up to 2.9 GW.cm -2 and large detuning (>400 meV) of the pump photon energy from the band edge absorption. Optical Stark shifts are underpinned by large transition dipoles of the colloidal quantum wells (mu = 15-23 D), which are larger than those of any reported colloidal quantum dots or epitaxial quantum wells. The rapid (<500 fs), narrow band blue shift of the excitonic features under circular excitation indicates the viability of these materials beyond light emission such as spintronics or all-optical switching.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Standoff Detection of Chemical Plumes Using Swept-ECQCL Remote Detection Technology: Results from EMRTC Complex Terrain Dual Tracer Experiment

As part of the Complex Terrain Dual Tracer Experiments performed in support of the LYNM program, a swept-wavelength external cavity quantum cascade laser (swept-ECQCL) remote detection system was deployed to measure chemical plume propagation with high temporal resolution. The swept-ECQCL remote detection technology was initially developed at PNNL, and is now under further development at Opticslah, LLC under SBIR funding from DOE (DOE SBIR Phase I Project DE-SC0019855, Remote Detection Technologies, Program Manager Chris Ramos). The swept-ECQCL technology provides a single-frequency infrared laser source which is rapidly scanned over a large wavelength range to measure the infrared absorption of gases, liquids, or solids. Analysis of the measured infrared absorption spectrum is used to detect, identify, and quantify the chemical species which are present. While most previous laser-based techniques used small wavelength tuning ranges to measure only a few isolated spectral lines of a few species, the swept-ECQCL provides the large tuning range needed to measure multiple species simultaneously, and to detect broad absorption features from large molecules or condensed phase materials. In addition, the swept-ECQCL systems have high enough spectral resolution and sensitivity to measure narrow lines of small molecules and determine isotope ratios. The remote detection system for gas plumes is based on the swept-ECQCL technology, and consists of a swept-ECQCL source, infrared detector, control electronics, and beam transmitting and alignment optics. The remote detection system directs the infrared output of the swept-ECQCL to a target retro reflector typically located at ~10-10,000 m distance. The swept-ECQCL wavelength is varied continuously over a large wavelength range (>1000 nm) at rates up to 1000 Hz. The swept ECQCL light reflected from the remote target is collected and focused onto an infrared photodetector. By measuring the detector signal continuously as the swept-ECQCL wavelength is varied, a time-series of absorption spectra are measured for the gases along the beam line of-sight. Based on analysis and fitting of the measured absorption spectra, the time-dependent chemical concentrations of species are determined. Multiple species and mixtures can be detected simultaneously, for all species with absorption features above the sensor noise floor. The sensor output is thus a continuous, high-speed record of identified chemicals along with their concentrations and isotope ratios of interest. The high-speed operation enables low-noise operation in conditions of atmospheric turbulence and allows tracking of fluctuating concentrations in transient chemical plumes as needed for reliable remote detection applications. All components operate with minimal cooling requirements and no cryogens are needed. In addition, the output infrared light is invisible with an intensity below the maximum permissible exposure (MPE) threshold of 100 mW/cm2 for these infrared wavelengths and thus eye safe. The measurement concept for plume detection using the swept-ECQCL remote detection system is as follows. The ECQCL beam is directed toward a remote retro-reflector, which reflects the beam back to the ECQCL system where it is focused onto an infrared photodetector. The line-of-sight from the ECQCL system to the retro-reflector defines the measurement path. The detected infrared signal is recorded continuously and detects the absorption of molecular species along the measurement path. Before a plume release, the system measures absorption from atmospheric constituents, which in this LWIR band consist primarily of lines from H 2 O and CO 2 , with additional weaker absorption from N 2 O, NH 3 , and O 3 possibly contributing. The system then measures any changes in absorption due to the tracer compounds when they enter the measurement path. The shape of absorption features is used to distinguish and identify the different tracer compounds, and the strength of the absorption is used to determine the path-integrated concentration – also called the column density.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Fano Resonance in CO 2 Reduction Catalyst Functionalized Quantum Dots

Molecular catalyst functionalized semiconductor quantum dots (QDs) are a promising modular platform for developing novel hybrid photocatalysts. The interaction between adsorbed catalyst vibrations and the QD electron intraband absorption can influence the photophysical properties of both the QD and the catalysts and potentially their photocatalysis. In CdSe QDs functionalized by the CO 2 reduction catalyst, Re(CO) 3 (4,4’-bipyridine-COOH)Cl, we observe that the transient Fano resonance signal resulting from coupling of the catalyst CO stretching mode and the QD conduction band electron mid-IR intraband absorption appears on an ultrafast time scale and decays with the electron population, irrespective of the occurrence of photoreduced catalysts. The Fano asymmetry factor increases with an increase in the adsorbed catalyst number and a decrease in QD sizes. The latter can be attributed to an enhanced charge transfer interaction between the more strongly quantum-confined QD conduction band and catalyst LUMO levels. These results provide a more in-depth understanding of interactions in excited QD-catalyst hybrid photocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Probing large-scale UV background inhomogeneity associated with quasars using metal absorption

ABSTRACT We study large-scale UV background inhomogeneity in three-dimensions associated with the observed quasar populations at high redshift. We do this by measuring metal absorption through quasar absorption spectrum stacking as a function distance to closest quasar in SDSS-IV/eBOSS on 10 s of comoving megaparsec scales. We study both intergalactic medium absorbers and mixed circumgalactic medium absorbers and probe absorption in O vi, C iv, and Si iv, and Si iii. Overall, stronger high ionization species absorption is seen closer to quasars at 2.4 < z < 3.1. O vi absorption shows a particularly strong change, with effects in C iv evident in some cases, and more marginal effects in Si iii and Si iv. We further study 2.05 < z < 2.4 (with weak signs of increasing homogeneity with time) and explore the study of metal absorption as a function of integrated SDSS-r band flux quasar flux (yielding consistent but less significant results). While the metal absorption does show sensitivity to large-scale 3D quasar proximity, the current incomplete quasar samples limit detailed interpretation. This work does, however, demonstrate that UV background inhomogeneities exist on scales of several 10 s of comoving megaparsecs associated with quasars and that they can be measured with precision by examining metal absorption in the intergalactic medium.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Room-Temperature Optical Detection of 14 CO 2 below the Natural Abundance with Two-Color Cavity Ring-Down Spectroscopy

Radiocarbon’s natural production, radiative decay, and isotopic rarity make it a unique tool to probe carbonaceous systems in the life and earth sciences. However, the difficulty of current radiocarbon ( 14 C) detection methods limits scientific adoption. Here, two-color cavity ring-down spectroscopy detects 14 CO 2 in room-temperature samples with an accuracy of one-tenth the natural abundance in 3 min. The intracavity pump–probe measurement uses two cavity-enhanced lasers to cancel out cavity ring-down rate fluctuations and strong one-photon absorption interference (>10 000 1/s) from hot-band transitions of CO 2 isotopologues. Selective, room-temperature detection of small 14 CO 2 absorption signals (<1 1/s) reduces the technical and operational burdens for cavity-enhanced measurements of radiocarbon, which can benefit a wide range of applications like biomedical research and field-detection of combusted fossil fuels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Landau quantization in tilted Weyl semimetals with broken symmetry

Broken symmetry and tilting effects are ubiquitous in Weyl semimetals (WSMs). Therefore, it is crucial to understand their impacts on the materials’ electronic and optical properties. Here, using a realistic four-band model for WSMs, which incorporates both the symmetry breaking and tilting effects, we study its Landau quantization and the associated magneto-absorption spectrum. We show that the Landau bands in tilted WSMs can be obtained by considering a non-tilt Hamiltonian through Lorentz boost. Furthermore, broken symmetry effects can generate an additional term in the Hamiltonian, which equivalently lead to band reconstruction. Our work provides a more realistic view of the magnetic field response of WSMs that shall be taken into account in relevant future device applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Entangled two-photon absorption with Brownian-oscillator fluctuations

Here, we theoretically investigate the two-photon absorption signals of a three-band (g, e, f) system diagonally coupled to an over-damped Brownian oscillator bath, which induces random Gaussian modulations of energy levels with an arbitrary degree of correlation. For fast modulation, extra 2ω eg and 2ω fe peaks may obscure the g–f transitions in the classical two-photon absorption (CTPA) spectra for nearly resonant e states. These peaks arise from one-photon resonant g–e or e–f transitions. In the slow modulation limit, these peaks vanish because of the short tails of the Gaussian line shape. CTPA strongly depends on the correlations between energy fluctuations. In entangled two-photon absorption, the extra peaks are eliminated because of the broad one-photon but narrow two-photon spectrum of the twin photons. The variation of the coherences between f states with the correlation between energy fluctuations is explored.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗