Search NASA⌕ Search

SEARCH · Search NASA

Results for “acidity constant”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Compositional Variation Tests on DuraMelter 100 with LAW Sub-Envelope A1 Feed (LAWA44 Glass) in Support of the LAW Pilot Melter, VSL-02R62N0-4, Rev. 0 (Nov 2002)

The two tests described in this report utilized blended feed (glass formers plus waste simulant) prepared by Optima Chemicals according to VSL specifications generating about 1. 7 metric tons of glass. Sugar was added (at VSL) to the nominal feed at a "sugar ratio" of 0.5 for each of the two variation tests1; however, since the sugar addition is assumed to be "blind" to the variations, the actual sugar ratios were 0.57 and 0.44. The DMl00-WV melter was used in order to provide a direct comparison with the LAW tests previously conducted on the same melter. Two 100-hour melter tests were conducted: one with a 15% deficiency in simulant and one with 15% excess in simulant. Key operating parameters including cold cap coverage, feed rate, and glass pool temperature were held constant to investigate the effects of the glass compositional changes on processing characteristics (including salt formation) and the product glass. The bubbling rate was adjusted to provide the desired glass production rate with a near complete cold cap (90-100% of melt surface covered with feed). Quantitative measurements of glass production rates, melter operating conditions (temperatures, pressures, power, flows, etc.), and off-gas characteristics (NOx, SO 2, CO, particulate load and composition, and acid gases) were made for each test.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Acid–base concentration swing for direct air capture of carbon dioxide

This work demonstrates the first experimental evidence of the acid–base concentration swing (ABCS) for direct air capture of CO 2 . This process is based on the effect that concentrating particular acid–base chemical reactants will strongly acidify solution, through Le Chatelier's principle, and result in outgassing absorbed CO 2 . After collecting the outgassed CO 2 , diluting the solution will result in a reversal of the acid–base reaction, basifying the solution and allowing for atmospheric CO 2 absorption. The experimental study examines a system that includes sodium cation as the alkalinity carrier, boric acid, and a polyol complexing agent that reversibly reacts with boric acid to strongly acidify solution upon concentration. Though the tested experimental system faces absorption rate and water capacity limitations, the ABCS process described here provides a basis for further process optimization. A generalized theoretical ABCS reaction framework is developed and different reaction orders and conditions are studied mathematically. Higher order reactions yield favorable cycle output results, reaching volumetric cycle capacity above 50 mM for third-order and 80 mM for fourth-order reactions. Optimal equilibrium constants are determined in order to guide alternative chemical searches and synthetic chemistry design targets. There is a substantial energetic benefit for reaction orders above the first, with second- and third-order ABCS cycles exhibiting a thermodynamic minimum work for the concentrating and outgassing steps around 150 kJ per mole of CO 2 . A significant advantage of the ABCS is that it can be driven through well-developed and widely-deployed desalination technologies, such as reverse osmosis, with opportunities for energy recovery when recombining the concentrated and diluted streams, and extraction can occur directly from the liquid phase upon vacuum application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

High-affinity amide-lanthanide adsorption to gram-positive soil bacteria

The gram-positive soil bacterium, Arthrobacter nicotianae, uses multiple organic acid functional groups to adsorb lanthanides onto its cell surface. At relevant soil pH conditions of 4.0–6.0, many of these functional groups are de-protonated and available for cation sorption and metal immobilization. However, among the plethora of naturally occurring site types, A. nicotianae is shown to possess high-affinity amide and phosphate sites that disproportionately affect lanthanide adsorption to the cell wall. We quantify neodymium (Nd)-selective site types, reporting an amide-Nd stability constant of log 10 K = 6.41 ± 0.23 that is comparable to sorption via phosphate-based moieties. These sites are two to three orders of magnitude more selective for Nd than the adsorption of divalent metals to ubiquitous carboxyl-based moieties. This implies the importance of lanthanide biosorption in the context of metal transport in subsurface systems despite trace concentrations of lanthanides found in the natural environment.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Exploring an ‘ideal hill': how lithology and transport mechanisms affect the possibility of a steady state during weathering and erosion

We introduce a model of chemical reaction within hills to explore how evolving porosity (and by inference, permeability) affects flow pathways and weathering. The model consists of hydrologic and reactive-transport equations that describe alteration of ferrous minerals and feldspar. These reactions were chosen because previous work emphasized that oxygen- and acid-driven weathering affects porosity differently in felsic and mafic rocks. A parameter controlling the order of the fronts is presented. In the absence of erosion, the two reaction fronts move at different velocities and the relative depths depend on geochemical conditions and starting composition. In turn, the fronts and associated changes in porosity drastically affect both the vertical and lateral velocities of water flow. For these instances, estimates of weathering advance rates based on simple models that posit unidirectional constant-velocity advection do not apply. In the model hills, weathering advance rates diminish with time as the Darcy velocities decrease with depth. The system can thus attain a dynamical steady state at any erosion rate where the regolith thickness is constant in time and velocities of both fronts become equal to one another and to the erosion rate. The slower the advection velocities in a system, the faster it attains a steady state. For example, a massive rock with relatively fast-dissolving minerals such as diabase -- where solute transport across the reaction front mainly occurs by diffusion -- can reach a steady state more quickly than granitoid rocks in which advection contributes to solute transport. The attainment of a steady state is controlled by coupling between weathering and hydrologic processes that force water to flow horizontally above reaction fronts where permeability changes rapidly with depth and acts as a partial barrier to fluid flow.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

A characterization of recombinant Arabidopsis FRIABLE1 (FRB1) reveals robust rhamnogalacturonan-I rhamnosyltransferase activity and critical catalytic residues

Plant cell walls are glycan-rich extracellular matrices that fundamentally impact essential cellular processes, such as growth, adhesion, and cell shape acquisition. Understanding plant cell wall glycans requires the identification and characterization of the biosynthetic enzymes that produce these polymers. Most successful in vitro protein expression studies of plant cell wall glycosyltransferases have relied on insect, fungal/yeast, or human cell expression systems, whereas prokaryotic expression systems have been generally unsuccessful. Here, we show that Arabidopsis FRIABLE1 (FRB1)/rhamnogalacturonan-I rhamnosyltransferase 8 (RRT8) can be produced in Escherichia coli RosettaGami2 cells as N-terminal maltose-binding protein fusion proteins containing C-terminal 6X-His-tags. We also report the catalytic constants of FRB1/RRT8 with apparent K M and K cat values of 226 μM and 33 min -1 for UDP-Rhamnose and 117 μM and 28.7 min -1 for rhamnogalacturonan-I (RG-I), respectively. We examine the catalytic activities of mutated FRB1/RRT8 proteins based on an AlphaFold 3-generated FRB1/RRT8 protein structural model with a virtually docked UDP-Rha donor. Enzymatic characterization of the mutated and wildtype FRB1/RRT8 protein confirmed that mutation of predicted catalytic site amino acid residues resulted in a 20-fold reduction in RRT activity. FRB1 also robustly polymerizes RG-I in combination with RG-I galacturonosyltransferase 1. These results show how a robust E. coli expression system combined with artificial intelligence tools can be used to increase understanding of plant cell wall glycosyltransferase structure and function.

glycosyltransferase↗
DOE OSTI2020

Reformulated Red mud: a robust catalyst for in situ catalytic pyrolysis of biomass

Biomass feedstocks contain inorganic compounds generally classified as ash. The ash consists of compounds of potassium, calcium, magnesium, silicon, phosphorous and other elements. These elements have been reported to influence both the pyrolysis reactions as well as destabilizing the pyrolysis oils during storage. The inorganic elements have also been reported to deposit on catalyst surfaces during in situ catalytic pyrolysis leading to the eventual deactivation of acidic catalysts such as zeolites. The deposition of inorganic elements and their effect on formulated red mud (FRM) catalyst during in situ catalytic pyrolysis of pinyon juniper wood was investigated. The inorganic elements were measured for the fresh, coked, and regenerated catalysts. The BET specific surface area of the FRM catalyst decreased from 76 m2/g for the fresh catalyst to 53 m2/g for the stable regenerated catalyst. After three regenerations, the BET specific surface area stabilized at 53 m2/g and remained constant after all other regenerations. Potassium, calcium, magnesium, and phosphorous were deposited on the catalyst. Potassium deposition was linear with the number of regenerations while magnesium and calcium depositions were initially rapid but leveled off after three regenerations of the catalyst. Phosphorous deposition was almost linear, but the data were more scattered compared to potassium. The potassium deposition was attributed to physical phenomenon whereas calcium and magnesium depositions were more akin to chemical reactions related to the loss of BET surface area of the catalyst. The deposition of these elements on the surface of the catalyst did not deactivate it. After each catalyst regeneration, the oil yield was not significantly affected and the oil oxygen content and viscosity decreased slightly. This clearly showed that formulated red mud is a robust catalyst suitable for in situ catalytic fast pyrolysis of biomass.

Agblevor, Foster↗
DOE OSTI2024

ATR-SEIRAS Method to Measure Interfacial pH during Electrocatalytic Nitrate Reduction on Cu

This study reports the accuracy and applications of an attenuated total reflectance–surface-enhanced infrared absorption spectroscopy (ATR–SEIRAS) technique to indirectly measure the interfacial pH of the electrolyte within 10 nm of the electrocatalyst surface. This technique can be used in situ to study aqueous electrochemical reactions with a calibration range from pH 1–13, time resolution down to 4 s, and an average 95% confidence interval of 14% that varies depending on the pH region (acidic, neutral, or basic). The method is applied here to electrochemical nitrate reduction at a copper cathode to demonstrate its capabilities, but is broadly applicable to any aqueous electrochemical reaction (such as hydrogen evolution, carbon dioxide reduction, or oxygen evolution) and the electrocatalyst may be any SEIRAS-active thin film (e.g., silver, gold, or copper). The time-resolved results show a dramatic increase in the interfacial pH from pH 2–7 in the first minute of operation during both constant current and pulsed current experiments where the bulk pH is unchanged. Attempts to control the pH polarization at the surface by altering the electrochemical operating conditions—lowering the current or increasing the pulse frequency—showed no significant change, demonstrating the challenge of controlling the interfacial pH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Influence of build direction on the fracture mechanism of 3D printed octet lattices

Here, we investigate the effects of 3D printing build directions on the fracture properties of octet lattice metamaterials made of polylactic acid (PLA) and how these effects vary with the relative density of the lattices. Single-edge notch bend samples are 3D printed in two orthogonal build directions at various relative densities. Our results show that the work of fracture for octet lattices with build directions parallel to the crack plane is significantly higher than those with build directions perpendicular to the crack plane. We also observed that the ratio of specific work of fracture between the two build directions remains nearly constant across different relative densities. In contrast, the ratio of peak load between the two build directions decreases as relative density increases. Furthermore, the build direction dictates the fracture mechanism. While the perpendicular build direction predominantly results in a brittle (mode I) fracture, the parallel build direction leads to a complex, delamination-dominated (mode II type) fracture. This phenomenon is largely governed by the weak interfaces formed between the printed layers and their interaction with the lattice geometry. These results reveal that the build direction governs the fracture mechanism and work of fracture of these lattice metamaterials and is therefore an important design consideration.

3D printed PLA↗
DOE OSTI2021

An Implementation of Replica Exchange with Dynamical Scaling for Efficient Large-Scale Simulations

An implementation of the replica exchange with dynamical scaling (REDS) method in the commonly used molecular dynamics program GROMACS is presented. REDS is a replica exchange method that requires fewer replicas than conventional replica exchange while still providing data over a range of temperatures and can be used in either constant volume or constant pressure ensembles. Details for running REDS simulations are given, and an application to the human islet amyloid polypeptide (hIAPP) 11-25 fragment shows that the model efficiently samples conformational space.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Data-Driven Discovery of Linear Molecular Probes with Optimal Selective Affinity for PFAS in Water

Approaches to tackle the wide and growing variety of highly persistent per- and polyfluoroalkyl substances (PFAS) are of pressing global need because of their detrimental human health effects, such as cancer, birth defects, and hormone imbalance. Sensitive, selective, and easy-to-use real-time sensors to monitor and detect PFAS and sorbents to extract them are critical to meeting government-mandated environmental concentrations. In this work, we combine all-atom molecular dynamics simulations, enhanced sampling, deep representational learning, and Bayesian optimization to perform high-throughput virtual screening for highly sensitive and selective molecular probes. Our molecular design space consists of 3850 linear hydrocarbon chains with varying degrees of halogenation with and without amine- and phosphine-based headgroups. By employing a data-driven search process, we efficiently explore the molecular design space to optimize the sensitivity to perfluorooctanesulfonic acid (PFOS) as a prototypical PFAS analyte and selectivity relative to a sodium dodecyl sulfate (SDS) interferent. We calculate 504 Gibbs free energies of probe-analyte and probe-interferent interactions and identify probes with PFOS association free energies of up to (-ΔG PFOS ) = 9.8 ± 0.2 kJ/mol and selectivities relative to SDS of (-ΔΔG PFOS–SDS ) = 3.1 ± 1.5 kJ/mol. A C 11 Br 23 P(CH 3 ) 2 probe containing 11 backbone brominated carbons and a tertiary phosphine headgroup possesses the most sensitive binding constant to PFOS within the defined search space of K b PFOS = 177.4 ± 12.7, and a semibrominated probe C 5 H 11 C 7 Br 14 N(CH 3 ) 2 containing 12 backbone carbons and a tertiary amine headgroup possesses the highest selectivity relative to SDS of K b PFOS /K b SDS = 4.6 ± 1.7. A retrospective analysis of our data to extract interpretable design rules reveals that the sensitivity of linear hydrogenated probes increases by approximately 1 kJ/mol per C–C bond. The addition or removal of halogen atoms and amine or phosphine headgroups produces nonmonotonic changes in both sensitivity and selectivity with changes to the sensitivity of up to 2.5 kJ/mol. Finally, this work places empirical limitations on the performance of a wide range of linear probes for PFOS detection and offers a generic strategy for high-throughput computational screening to promote selective and sensitive binding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

The Role of Chloroplast Membrane Lipid Metabolism in Plant Environmental Responses

Plants are nonmotile life forms that are constantly exposed to changing environmental conditions during the course of their life cycle. Fluctuations in environmental conditions can be drastic during both day–night and seasonal cycles, as well as in the long term as the climate changes. Plants are naturally adapted to face these environmental challenges, and it has become increasingly apparent that membranes and their lipid composition are an important component of this adaptive response. Plants can remodel their membranes to change the abundance of different lipid classes, and they can release fatty acids that give rise to signaling compounds in response to environmental cues. Chloroplasts harbor the photosynthetic apparatus of plants embedded into one of the most extensive membrane systems found in nature. In part one of this review, we focus on changes in chloroplast membrane lipid class composition in response to environmental changes, and in part two, we will detail chloroplast lipid-derived signals.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Distinguishing Electron and Hole Dynamics in Functionalized CdSe/CdS Core/Shell Quantum Dots Using Complementary Ultrafast Spectroscopies and Kinetic Modeling

The evolution of excitation energy and photogenerated charges in semiconductor quantum dots (QDs) functionalized with molecular acceptors can be probed on ultrafast time scales using techniques such as transient absorption (TA) spectroscopy. However, historical interpretations that the 1S(e)-1S 3/2 (h) transition in Cd-chalcogenide QDs is fully attributable to electrons may be misleading, and multiexponential models used to fit TA kinetics do not correspond directly to specific photophysical processes. Here, we present visible-wavelength and mid-IR TA and time-resolved photoluminescence measurements to inform a comprehensive kinetic model of the photoexcited CdSe/CdS core/shell QDs functionalized with passivating oleic acid (OA), hole-accepting ferrocene, or electron-accepting naphthalene bisimide (NBI). We show that ~30% of the 1S signal and 72% of the IR signal can originate from holes in well-passivated core/shell QDs. We also demonstrate evidence of electron trapping in OA-capped core/shell QDs, with additional electron transfer and hole trapping in the QDs functionalized with NBI. Electron (hole) trapping and detrapping occur in 450 ± 100 ps (430 ± 70 ps) and 340 ± 100 ps (1.1 ± 0.4 ns) respectively, while the time constant for electron transfer to NBI is ~1.8 ns. The comprehensive picture of photophysical processes provided by the complementary ultrafast techniques and kinetic modeling can accelerate both the fundamental science and application development of nanostructured and molecular systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Dual Inhibitors of SARS-CoV-2 3CL Protease and Human Cathepsin L Containing Glutamine Isosteres Are Anti-CoV-2 Agents

SARS-CoV-2 3CL protease (Main protease) and human cathepsin L are proteases that play unique roles in the infection of human cells by SARS-CoV-2, the causative agent of COVID-19. Both proteases recognize leucine and other hydrophobic amino acids at the P 2 position of a peptidomimetic inhibitor. At the P 1 position, cathepsin L accepts many amino acid side chains, with a partial preference for phenylalanine, while 3CL-PR protease has a stringent specificity for glutamine or glutamine analogues. We have designed, synthesized, and evaluated peptidomimetic aldehyde dual-target (dual-acting) inhibitors using two peptide scaffolds based on those of two Pfizer 3CL-PR inhibitors, Nirmatrelvir, and PF-835321. Our inhibitors contain glutamine isosteres at the P 1 position, including 2-pyridon-3-yl-alanine, 3-pyridinyl-alanine, and 1,3-oxazo-4-yl-alanine groups. Inhibition constants for these new inhibitors ranged from K i = 0.6–18 nM (cathepsin L) and K i = 2.6–124 nM (3CL-PR), for which inhibitors with the 2-pyridon-3-yl-alanal substituent were the most potent for 3CL-PR. The anti-CoV-2 activity of these inhibitors ranged from EC 50 = 0.47–15 μM. X-ray structures of the peptidomimetic aldehyde inhibitors of 3CL-PR with similar scaffolds all demonstrated the formation of thiohemiacetals with Cys 145 , and hydrogen-bonding interactions with the heteroatoms of the pyridon-3-yl-alanyl group, as well as the nitrogen of the N-terminal indole and its appended carbonyl group at the P 3 position. The absence of these hydrogen bonds for the inhibitors containing the 3-pyridinyl-alanyl and 1,3-oxazo-4-yl-alanyl groups was reflected in the less potent inhibition of the inhibitors with 3CL-PR. In summary, our studies demonstrate the value of a second generation of cysteine protease inhibitors that comprise a single agent that acts on both human cathepsin L and SARS-CoV-2 3CL protease. Such dual-target inhibitors will provide anti-COVID-19 drugs that remain active despite the development of resistance due to mutation of the viral protease. Such dual-target inhibitors are more likely to remain useful therapeutics despite the emergence of inactivating mutations in the viral protease because the human cathepsin L will not develop resistance. This particular dual-target approach is innovative since one of the targets is viral (3CL-PR) required for viral protein maturation and the other is human (hCatL) which enables viral infection.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Single-Atom Doping at the Molecule–Metal Interface: How Rh Affects Surface Explosion Kinetics

Controlling chemical reactions at interfaces is central to many fields, including atmospheric, environmental, and biological chemistry as well as catalysis and corrosion. We performed a fundamental study of how catalytically active Rh atoms placed at and above a molecule-metal interface influence the surface reaction kinetics of tartaric acid (TA) decomposition. Specifically, TA decomposition on Cu(100) exhibits autocatalytic decomposition kinetics involving a slow initiation step followed by fast decomposition of the molecular layer. These so-called “surface explosions” are extremely sensitive to initial conditions, making it fundamentally interesting to study how the placement of reactive atoms affects the reaction rate. Temperature-programmed reaction (TPR) experiments reveal that Rh atoms embedded in the Cu(100) surface beneath TA (TA/Rh/Cu) or atop the TA layer (Rh/TA/Cu) reduce the decomposition temperature and modify the reaction rate constants. Isothermal TPR analysis reveals that Rh enhances both the initiation rate constant, k i , and the explosion rate constant, k e , facilitating explosive decomposition at lower temperatures. This result provides evidence that both the initiation and explosion steps occur at the metal-molecule interface and are accelerated by the presence of Rh at this interface. This study illustrates how small amounts of reactive elements may be used to control nonlinear kinetic processes at interfaces.

desorption↗
DOE OSTI2020

Exploring competitive metal binding and crystallization of UO 2 2+ and Cu 2+ tetrahydrofuran-2,3,4,5-tetracarboxylic acid complexes

Solvent extractions are used to separate actinide elements from fission products in nuclear waste streams and the successful isolation of specific species utilize subtle differences in metal ligand binding. Metal ligand binding is also important in crystallization of metal organic materials and herein we explore the importance of competitive binding in the tetrahydrofuran-2,3,4,5-tetracarboxylic acid (THFTCA) system. This ligand has been previously evaluated for the selective extraction of uranium from other lanthanides and actinides and in the current research, we evaluate the crystallization of uranyl-THFTCA complexes in the presence of Cu 2+ , Sr 2+ , Th 4+ , and Ce 3+ . Three major phases were formed in the crystallization experiments and characterized with single crystal X-ray diffraction, powder X-ray diffraction, thermogravimetric analysis, and Raman spectroscopy. Two of the resulting phases were novel (UTHF1 ((C 4 H 10 N 2 )[UO 2 (C 8 H 8 O 9 ) 2 ]∙2H 2 O) and UTHF2 (Na[(UO 2 )(C 8 H 5 O 9 )(H 2 O)]∙ 3.5 H 2 O)), whereas the third (CuTHF1) was previously reported in the literature. Raman spectroscopy was utilized to evaluate spectral changes in the mother liquor of UTHF1, UTHF2, and CuTHF1 over time to assess the crystallization process. Further, isothermal titration calorimetry was used to determine the binding constants for UO 2 2+ and Cu 2+ to the THFTCA ligand in solution and evaluate the role of competitive metal binding in this system. The thermodynamic parameters and the crystallographic data were used to justify the formation of a weaker UO 2 2+ -THFTCA complex. Formation of a weaker UO 2 2+ -THFTCA complex supports our findings that UTHF1 only forms in homomeric systems, but suggests that the crystallization of UTHF2 and CuTHF1 is reliant on the presence of additional counter ions and ligands to change the amount of available THFTCA ligand.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Electrochemical leaching of spent LIBs: Kinetics, novel reactor, and modeling

The use of electrons as main reagent for the recovery and recycling of critical metals from spent lithium-ion batteries (LIBs) is a process electrification strategy that can be used to close the life-cycle loop of LIBs through more sustainable methods. Electrochemical leaching, a process that uses a reductant that is constantly regenerated electrochemically for the leaching of lithium-ion battery black mass (LIBBM), has shown high extraction efficiencies and sustainable scores. However, slow kinetics, reactor design challenges and lack of deeper understanding of the underlying processes are barriers to the optimization, scale-up, and market adoption of this technology. In this paper, a kinetic study and mathematical model for dissolving LIBBM is presented to better understand the underlying mechanisms aiming to reduce the processing time and make predictions for future design and scale-up. The effect of acid and electrochemically mediated reductant concentrations, LIBBM loading, and cathode/reactor designs were explored. As a result, the leaching time was reduced from 7h to under 1h at a pulp density of 73 g/L, without external heating. A novel reactor with parallel baffle electrodes (PBE) was developed, which significantly reduced the leaching time by improving convection in a stirred slurry electrochemical reactor. Dimensionless numbers were deduced from an unsteady state model, which can be used in dimensional analysis for future process design and scale-up.

25 ENERGY STORAGE↗
DOE OSTI2022

Modeling the partitioning of amphiphilic molecules and co-solvents in biomembranes

We report amphiphilic co-solvents can have a significant impact on the structure, organization and physical properties of lipid bilayers. Describing the mutual impact of partitioning and induced structure changes is therefore a crucial consideration for a range of topics such as anesthesia and other pharmacokinetic effects, as well as microbial solvent tolerance in the production of biofuels and other fermentation products, where molecules such as ethanol, butanol or acetic acid might be generated. Small-angle neutron scattering (SANS) is a key method for studying lipid and polymer bilayer structures, with many models for extracting bilayer structure (thickness, area per lipid etc.) from scattering data in use today. However, the molecular details of co-solvent partitioning are conflated with induced changes to bilayer structure, making interpretation and modeling of the scattering curves a challenge with the existing set of models. To address this, a model of a bilayer structure is presented which invokes a two-term partition constant accounting for the localization of the co-solvent within the bilayer. This model was validated using a series of SANS measurements of lipid vesicles in the presence of the co-solvent tetrahydrofuran (THF), showing several strategies of how to deploy the two-parameter partition constant model to describe scattering data and extract both structure and partitioning information from the data. Molecular dynamics simulations are then used to evaluate assumptions of the model, provide additional molecular scale details and illustrate its complementary nature to the data fitting procedure. This approach results in estimates of the partition coefficient for THF in 1,2-dimyristoyl-sn-glycero-3-phosphocholine at 35°C, along with an estimate of the fraction of THF residing in the hydrophobic core of the membrane. The authors envision that this model will be applicable to a wide range of other bilayer/amphiphile interactions and provide the associated code needed to implement this model as a fitting algorithm for scattering data in the SasView suite.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Half‐sandwich ruthenium complex with a very low overpotential and excellent activity for water oxidation under acidic conditions

Abstract Molecular catalysts are acknowledged for the ability to design reaction sites within well‐defined structures to achieve high catalytic activities. However, in many cases, molecular catalysts undergo structural changes to some other form(s), which are finally the real catalysts. Here, we report two half‐sandwich ruthenium complexes; [Ru([9]aneN3)(bpy)Cl] + 3 and [Ru([9]aneN3)(pic)OH 2 ] 2+ 4 , based on the macrocyclic 1,4,7‐triazacyclononane ([9]aneN3) ligand for water oxidation (WO). The two complexes have similar core but different ancillary ligands, which greatly affected their stability as well as activity for WO. Complex 3 retained high stability and excellent activity (turnover number [TON] = 1250) in chemical WO and first‐order reaction kinetics with respect to [Ce IV ] with a calculated rate constant ( k cat ) of 34.59 s −1 . Further, the complex demonstrated very low overpotential of ~210 mV in electrochemical WO. At an overpotential of only 400 mV, turnover frequency (TOF) of complex 3 was electrochemically estimated to be 131.2 s −1 . In contrast, complex 4 underwent picolinate ligand dissociation, as a deactivation pathway, to form the tri‐aqua derivative. Density functional theory (DFT) calculations are used to explain the dissociation mechanism of picolinate ligand in complex 4 , which happens through a stepwise dissociation mechanism.

Younus, Hussein A.↗