Search NASA⌕ Search

SEARCH · Search NASA

Results for “acoustic phonons”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Atomic-scale visualization of defect-induced localized vibrations in GaN

Phonon engineering is crucial for thermal management in GaN-based power devices, where phonon-defect interactions limit performance. However, detecting nanoscale phonon transport constrained by III-nitride defects is challenging due to limited spatial resolution. Here, we used advanced scanning transmission electron microscopy and electron energy loss spectroscopy to examine vibrational modes in a prismatic stacking fault in GaN. By comparing experimental results with ab initio calculations, we identified three types of defect-derived modes: localized defect modes, a confined bulk mode, and a fully extended mode. Additionally, the PSF exhibits a smaller phonon energy gap and lower acoustic sound speeds than defect-free GaN, suggesting reduced thermal conductivity. Our study elucidates the vibrational behavior of a GaN defect via advanced characterization methods and highlights properties that may affect thermal behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Imaging of surface acoustic waves on GaAs using 2D confocal Raman microscopy and atomic force microscopy

Surface acoustic wave devices have been fabricated on a GaAs (100) substrate to demonstrate the capability of 2D Raman microscopy as an imaging technique for acoustic waves on the surface of a piezoelectric substrate. Surface acoustic waves are generated using a two-port interdigitated transducer platform, which is modified to produce surface standing waves. We have derived an analytical model to relate Raman peak broadening to the near-surface strain field of the GaAs surface produced by the surface acoustic waves. Additionally, atomic force microscopy is used to confirm the presence of a standing acoustic wave, resolving a total vertical displacement of 3 nm at the antinode of the standing wave. Stress calculations are performed for both imaging techniques and are in good agreement, demonstrating the potential of this Raman analysis.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

Lattice anharmonicity effects in fluorite oxide single crystals and anomalous increase in phonon lifetime in ceria at elevated temperature

Here, we investigate the temperature dependence of the frequency and linewidth of the triply degenerate T 2g zone-centered optical phonon in flux-grown ceria and hydrothermally synthesized thoria single crystals from room temperature to 1273 K using Raman spectroscopy. Both crystals exhibit an expected increase in the phonon linewidth with temperature due to enhanced phonon–phonon scattering. However, ceria displays an anomalous linewidth reduction in the temperature range of 1023–1123 K. First-principles phonon linewidth calculations considering cubic and quartic phonon interactions within temperature-independent phonon dispersion fail to describe this anomaly. A parameterization of the temperature-dependent second-order interatomic force constants based on previously reported phonon dispersion measured at room and high temperatures predicts a deviation from the monotonic linewidth increase, albeit at temperatures lower than those observed experimentally for ceria. The qualitative agreement in the trend of temperature-dependent linewidth suggests that lattice anharmonicity-induced phonon renormalization plays a role in phonon lifetime. Specifically, a change in the overlap between softened acoustic and optical branches in the dispersion curve reduces the available phonon scattering phase space of the Raman-active mode at the zone center, leading to an increased phonon lifetime within a narrow temperature interval. These findings provide insights into higher-order anharmonic interactions in ceria and thoria, motivating further investigations into the role of anharmonicity-induced phonon renormalization on phonon lifetimes at high temperatures.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Anharmonic phonon dispersion in polyethylene

The second-order Green's function method for anharmonic crystals has been applied to an infinite, periodic chain of polyethylene taking into account up to quartic force constants. The frequency-independent approximation to the Dyson self-energy gives rise to numerous divergent resonances, which are fortuitous. Instead, solving the Dyson equation self-consistently with a frequency-dependent self-energy resists divergences from resonances or zero-frequency acoustic vibrations. Here, the calculated anharmonic phonon dispersion, which nonetheless displays many true resonances, and anharmonic phonon density of states furnish hitherto unknown details that explain smaller features of observed vibrational spectra.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Probing phonon focusing, thermomechanical behavior, and moiré patterns in van der Waals architectures using surface acoustic waves

Surface acoustic waves (SAWs) propagate along solid-air, solid-liquid, and solid-solid interfaces. Their characteristics depend on the elastic properties of the solid. Combining transmission electron microscopy (TEM) experiments with molecular dynamics (MD) simulations, we probe atomic environments around intrinsic defects that generate SAWs in vertically stacked two-dimensional (2D) bilayers of MoS 2 . Our joint experimental-simulation study provides insights into SAW-induced structural and dynamical changes and thermomechanical responses of MoS 2 bilayers. Using MD simulations, we compute mechanical properties from the SAW velocity and thermal conductivity from thermal diffusion of SAWs. The results for Young’s modulus and thermal conductivity of an MoS 2 monolayer are in good agreement with experiments. The presence of defects, such as nanopores which generate SAWs, reduces the thermal conductivity of 2D-MoS 2 by an order of magnitude. We also observe dramatic changes in moiré patterns, phonon focusing, and cuspidal structures on 2D-MoS 2 layers.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Listening for new physics with quantum acoustics

We present a novel application of a qubit-coupled phonon detector to search for new physics, e.g., ultralight dark matter (DM) and high-frequency gravitational waves. The detector, motivated by recent advances in quantum acoustics, is composed of superconducting transmon qubits coupled to high-overtone bulk acoustic resonators (ℎ⁡BARs) and operates in the GHz−10 GHz frequency range. New physics can excite 𝒪⁡(10 μ⁢eV) phonons within the ℎ⁡BAR, which are then converted to qubit excitations via a transducer. We detail the design, operation, backgrounds, and expected sensitivity of a prototype detector, as well as a next-generation detector optimized for new physics signals. We find that a future detector can complement current haloscope experiments in the search for both dark photon DM and high-frequency gravitational waves. Lastly, we comment on such a detector’s ability to operate as a 𝒪⁡(10 μ⁢eV) athermal phonon sensor for sub-GeV DM detection.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

Thin-film lithium niobate on diamond as a platform for efficient spin-phonon coupling

Negatively charged silicon vacancy (SiV − ) centers in diamond are leading candidates for solid-state quantum memory that can be controlled using electromagnetic or acoustic waves. The latter are particularly promising due to the strong strain response of SiV − , enabling large spin-phonon interaction strengths. Indeed, coherent spin control via surface acoustic waves (SAWs) has been demonstrated and is essential for developing on-chip phononic quantum networks. However, the absence of piezoelectricity in diamond requires an interface with a piezoelectric material for efficient transduction and delivery of acoustic waves to spins in diamonds. Here, we demonstrate a heterogeneously integrated phononic platform that combines thin-film lithium niobate with diamond to enable acoustic control of single SiV − spins. Additionally, leveraging large SAW-induced strain at the location of SiV − , we achieve coherent acoustic control of an electron spin with more than twofold improvement in Rabi frequency compared to state-of-the-art devices based on aluminum nitride on diamond. Furthermore, this work represents a crucial step towards realizing phonon-based quantum information processing systems.

Optically detected magnetic resonance↗
DOE OSTI2024

Carbon-related donor–acceptor pair transition in the infrared in h-BN

Experimental studies of intentionally doped impurities for the understanding of conductivity control in hexagonal boron nitride (h-BN) ultrawide bandgap (UWBG) semiconductor are limited but are highly desired for emerging applications of h-BN. We report synthesis by hydride vapor phase epitaxy and comparison photoluminescence (PL) emission spectroscopy studies of intentionally carbon (C)-doped and undoped h-BN semi-bulk crystals. In addition to the well-known C-related emission lines observed previously, a C-impurity-related transition near 1.31 eV consisting of multiple phonon replicas has been observed in C-doped h-BN at room temperature. Phonon replicas involved in the 1.31 eV emission have been identified using polarization resolve PL spectroscopy as the transverse acoustic (TA)/longitudinal acoustic (LA) and out-of-plane optical phonon (ZO) modes at the middle point, T, between the Γ- and K-points in the first Brillouin zone. Based on the agreement between the spectral peak position of the observed dominant emission line at 1.31 eV and the calculated energy-level separation between CB donor (carbon replacing boron) and Ci acceptor (carbon interstitial), the observed IR emission line can be decisively assigned to the donor–acceptor pair (DAP) transition involving the CB donor and Ci acceptor assisted by the intervalley (Κ → Μ) scattering processes. The results reinforce the perception that C impurities form deep-level centers and provided an improved understanding of C impurities in h-BN.

Physics↗
DOE OSTI2025

Listening for Neutrinos with Quantum Acoustics

Many low-threshold superconducting detectors rely on athermal phonon sensing, in which meV-scale phonons from a DM scatter are sensed via their ability to break Cooper pairs in superconducting films. While detectors based on such pairbreaking sensors are highly advantageous and scalable, their sensor threshold is ultimately limited by the energy needed to break a Cooper pair, 2Δ. We present a novel detector architecture for single phonon detection at the O(10μeV) scale, the qubit-coupled hBAR, that does not share this limitation. This architecture, composed of a superconducting qubit piezoelectrically coupled to a high-overtone bulk acoustic resonator, was originally developed in the context of the quantum acoustics community and has a sensor threshold ultimately limited by thermal noise. Such ultra-low-threshold detectors have a wide range of fundamental science applications, including reactor monitoring via neutrinos.

Baxter, Daniel Stephen [Fermilab] (ORCID:000000030↗
DOE OSTI2020

Equation of State of TiN at High Pressures and Temperatures: A Possible Host for Nitrogen in Planetary Mantles

Nitrogen, the most abundant element in Earth's atmosphere, is also a primary component of solid nitride minerals found in meteorites and on Earth's surface. If they remain stable to high pressures and temperatures, these nitrides may also be important reservoirs of nitrogen in planetary interiors. We used synchrotron X-ray diffraction to measure the thermal equation of state and phase stability of titanium nitride (TiN) in a laser-heated diamond anvil cell at pressures up to ~70 GPa and temperatures up to ~2500 K. TiN maintains the cubic B1 (NaCl-type) crystal structure over the entire pressure and temperature range explored. It has K 0 = 274(4) GPa, K 0 ' = 3.9(2), and γ 0 = 1.39(4) for a fixed V 0 = 76.516(30) Å 3 (based on experimental measurements), q = 1, and θ 0 = 579 K. Additionally, we collected Raman spectra of TiN up to ~60 GPa, where we find that the transverse acoustic (TA), longitudinal acoustic (LA), and transverse optical (TO) phonon modes exhibit mode Grüneisen parameters of 1.66(17), 0.54(15), and 0.93(4), respectively. Based on our equation of state, TiN has a density of ~5.6–6.4 g/cm 3 at Earth's lower mantle conditions, significantly more dense than both the mantle of the Earth and the estimated densities of the mantles of other terrestrial planets, but less dense than planetary cores. Furthermore, we find that TiN remains stable against physical decomposition at the pressures and temperatures found within Earth's mantle, making it a plausible reservoir for deep planetary nitrogen if chemical conditions allow its formation.

58 GEOSCIENCES↗
DOE OSTI2024

Origin of charge density wave in topological semimetals SrAl 4 and EuAl 4

Topological semimetals in BaAl 4 -type structure show many interesting behaviors, such as charge density wave (CDW) in SrAl 4 and EuAl 4 , but not the isostructural and isovalent BaAl 4 , SrGa 4 , and BaGa 4 . Here using Wannier functions based on density functional theory, we calculate the susceptibility functions with millions of k-points to reach the small q-vector and study the origin and driving force behind the CDW. Our comparative study reveals that the origin of the CDW in SrAl 4 and EuAl 4 is the strong electron-phonon coupling interaction for the transverse acoustic mode at small q-vector along the Γ-Z direction besides the maximum of the real part of the susceptibility function from the nested Fermi surfaces of the Dirac-like bands, which explains well the absence of CDW in the other closely related compounds in a good agreement with experiment. We also connect the different CDW behaviors in the Al compounds to the macroscopic elastic properties.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A GHz-frequency multistrip acoustic beam splitter for quantum applications

Here we demonstrate a microwave-frequency, two-track acoustic beam splitter, based on a multistrip coupler design matched to four unidirectional transducers, two on each of the two acoustic tracks that make up the device. We explain the device design and its experimental implementation, showing good agreement between our model and the measured device scattering spectra. The beam splitter regime, dividing an input signal at port 1 into closely equal outputs at ports 2 and 3, is reached over a 94.7 MHz bandwidth centered at 4.79 GHz, with an output power division ratio |S 21 /S 31 | 2 = 1.1 ± 0.2. The measured bandwidth of the device is limited by the bandwidth of the transducers, rather than that of the multistrip coupler.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Emergence of liquid following laser melting of gold thin films

X-ray structural science is undergoing a revolution driven by the emergence of X-ray Free-electron Laser (XFEL) facilities. The structures of crystalline solids can now be studied on the picosecond time scale relevant to phonons, atomic vibrations which travel at acoustic velocities. In the work presented here, X-ray diffuse scattering is employed to characterize the time dependence of the liquid phase emerging from femtosecond laser-induced melting of polycrystalline gold thin films using an XFEL. In a previous analysis of Bragg peak profiles, we showed the supersonic disappearance of the solid phase and presented a model of pumped hot electrons carrying energy from the gold surface to scatter at internal grain boundaries. This generates melt fronts propagating relatively slowly into the crystal grains. By conversion of diffuse scattering to a partial X-ray pair distribution function, we demonstrate that it has the characteristic shape obtained by Fourier transformation of the measured F ( Q ). The diffuse signal fraction increases with a characteristic rise-time of 13 ps, roughly independent of the incident pump fluence and consequent final liquid fraction. This suggests the role of further melt-front nucleation processes beyond grain boundaries.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Anomalous thermal transport under high pressure in boron arsenide

High pressure represents extreme environments and provides opportunities for materials discovery. Thermal transport under high hydrostatic pressure has been investigated for more than 100 years and all measurements of crystals so far have indicated a monotonically increasing lattice thermal conductivity. Here we report in situ thermal transport measurements in the newly discovered semiconductor crystal boron arsenide, and observe an anomalous pressure dependence of the thermal conductivity. We use ultrafast optics, Raman spectroscopy and inelastic X-ray scattering measurements to examine the phonon bandstructure evolution of the optical and acoustic branches, as well as thermal conductivity under varied temperatures and pressures up to 32 gigapascals. Using atomistic theory, we attribute the anomalous high-pressure behaviour to competitive heat conduction channels from interactive high-order anharmonicity physics inherent to the unique phonon bandstructure. Our study verifies ab initio theory calculations and we show that the phonon dynamics—resulting from competing three-phonon and four-phonon scattering processes—are beyond those expected from classical models and seen in common materials. In conclusion, this work uses high-pressure spectroscopy combined with atomistic theory as a powerful approach to probe complex phonon physics and provide fundamental insights for understanding microscopic energy transport in materials of extreme properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Acoustic Radiation From a Superconducting Qubit: From Spontaneous Emission to Rabi Oscillations

Hybrid quantum systems that utilize controllable coupling between phonons and superconducting qubits could pave the way for a new generation of compact quantum memories and sensor technologies. However, the same electromechanical interaction mechanisms that enable coherent qubit-phonon coupling can also lead to decoherence due to the spontaneous phonon emission. In this paper we study the dynamics of a qubit coupled to an acoustic resonator by a piezoelectric film. By varying the surface topography of the resonator from rough to flat to shaped, we explore the crossover from fast decay of an excited qubit to quantum-coherent coupling between the qubit and an isolated phonon mode. The developed theoretical model allows us to establish and check quantitative links between the results obtained for the rough and shaped topographies. Discrepancy between the theory and the data for the flat resonator points to the imperfections of the studied device. Our experimental approach may be used for precision measurements of crystalline vibrations, the design of quantum memories, and the study of electromechanical contributions to dielectric loss.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Low spontaneous Brillouin scattering in anti-resonant hollow-core fibers in GHz frequency range

Brillouin light scattering (BLS) is a powerful experimental tool that can be used to gain insights into the fundamental and applied properties of matter, like dispersions of quasiparticles in a solid, as well as their spatiotemporal dynamics. Many applications of light scattering favor the use of optical fibers in place of free-space optics. In this study, we compare the performance of anti-resonant hollow core fibers to that of conventional solid core fused silica fibers for BLS experiments in the GHz frequency range. Conventional fibers are barely suitable for low-noise measurements because of the spontaneous scattering of photons on various phononic modes present in the core and cladding. In the case of the hollow-core fiber, we identify a range of discrete phononic modes and associate them with the various acoustic modes of the structure surrounding the hollow core using finite-element numerical simulations. The measured relative intensity of the spontaneous BLS signal from these modes is orders of magnitude smaller than that of a solid-core fiber, making anti-resonant hollow-core fibers one of the best solutions for the single-mode light guidance for BLS and potentially other low-noise photonic experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Coherent and Dynamic Small Polaron Delocalization in CuFeO 2

Small polarons remain a bottleneck in realizing efficient transition metal oxide devices. Routes to engineer small polaron coupling to electronic states and lattice modes to control carrier localization remain unclear. Here, we measure small polaron formation in CuFeO 2 using transient extreme ultraviolet reflection spectroscopy and compare to theoretical predictions in realistically parametrized Holstein models, demonstrating that polaron localization depends on coupling to high-frequency versus low-frequency phonon bath components. We measure small polaron formation on a comparable ∼100 fs timescale to other Fe(III) compounds. Dynamic delocalization of the polaron follows formation through a coherent lattice expansion between Fe–O layers and charge-sharing with surrounding Fe(IV) states. Simulations reveal two major factors dictate polaron formation timescales: phonon density and reorganization energy distributions between acoustic and optical modes, matching experimental findings. Our work shows how electronic-structural coupling in a polaron-host material can be leveraged to suppress polaronic effects for various applications.

Hematite↗