Search NASA⌕ Search

SEARCH · Search NASA

Results for “actinide chemistry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Utilization of traceable standards to validate plutonium isotopic purification and separation of plutonium progeny using AG MP-1M resin for nuclear forensic investigations

Radio-chronometric studies on plutonium (Pu) materials require independent measurement of the Pu (parent) content and isotopic distribution as well as concentration and isotopic distribution of the plutonium isotopic decay products. We performed a series of experiments to demonstrate the consistency of separations using the Lewatit MP 800 macroporous anion exchange resin and the AG MP-1M resin with traceable Pu isotopic certified reference material (CRM) standards 136, 137, 138, and 126-A. Two different mesh-sizes of the AG MP-1M resin were tested and the 50–100 mesh size resin was found to work more efficiently for the separation task. Both Lewatit and AG MP-1M resins were found to perform satisfactorily for quantitatively extracting the americium (Am) and uranium (U) progeny as well as gallium (Ga) present as a tracer in the Pu material. Both resins were effective in removing isobaric interferences from the Pu fraction used in isotopic measurements by thermal ionization mass spectrometry (TIMS). To address the co-elution of uranium and gallium, Alizarin red S (ARS) was used as a colorimetric dye to determine the behavior of UO 2 2+ and Ga 3+ on AG MP-1M resin with various acidic solutions as eluents using UV–vis spectra. Poor resolution of these peaks complicated quantitative analysis by UV–vis spectroscopy, but these results were informative in planning automated separation experiments by HPLC. LA-UR-24-28919.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Station 11: An Overview of Plutonium

Sitting between neptunium (atomic number 93) and americium (atomic number 95) is the element plutonium (atomic number 94). Of all the elements on the periodic table, plutonium exhibits some of the strangest characteristics, some of which continue to baffle scientists to this day.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Use of Electronic Laboratory Notebooks (ELN) in a Laboratory Information Management System (LIMS) [Slides]

The Actinide Analytical Chemistry (CAAC) group at Los Alamos National Laboratory (LANL) uses the LabWare LIMS (LabWare 7) system to manage our samples and material at risk. The LIMS system also provides other functionality which the Plasma Spectroscopy (PS) team has developed along with our LIMS team to provide streamlining and automation of all sample related actions required by PS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Impact of f-element complexation on the radiolytic robustness of separations ligands

Impact of f-element complexation on the radiolytic robustness of separations ligands Gregory P. Horne, Makayla R. Baxter, Corey D. Pilgrim, Travis S. Grimes, Center for Radiation Chemistry Research, Idaho National Laboratory, P.O. Box 1625, Idaho Falls, ID, 83415, USA Cristian Celis Barros, Department of Chemistry and Biochemistry, Florida State University, Tallahassee, FL 32306, USA. E-mail: ccelisbarros@fsu.edu Andrew R. Cook, Department of Chemistry, Brookhaven National Laboratory, Upton, New York, 11973, USA Stephen P. Mezyk, Department of Chemistry and Biochemistry, California State University Long Beach, 1250 Bellflower Boulevard, Long Beach, California, 90840-9507, USA The effects of ionizing radiation are ubiquitous throughout all aspects of a nuclear fuel cycle. However, the complexity and intensity of these effects are greatest during the management of used nuclear fuel, owing to the presence of a wide spectrum of radionuclides from neutron capture and fission processes. With regards to used nuclear fuel (UNF) reprocessing, radiation-induced processes typically promote the destruction of active compounds (e.g., complexants and additives) with the concomitant formation of potentially detrimental degradation products and corresponding changes in physical and chemical properties, which ultimately impact the effectiveness and longevity of a given reprocessing system. Concerning UNF complexants, radiation chemistry studies have historically focused on their radiation robustness in the absence of the metal ions they were designed to selectively complex. This knowledge gap is worrisome as previous studies on aqueous phase complexants have demonstrated significant changes in radiolytic behavior upon metal ion complexation.1-4 More recently, the rate of reaction of the n-dodecane radical cation—believed to be the major organic phase radiation-induced transient species responsible for complexant radiolysis in n-dodecane based solvent systems—with hexa-n-octylnitrilo-triacetamide (HONTA) was shown to increase by an order-of-magnitude upon complexation of europium or americium.5 These findings have significant implications on the projected longevity of complexants in UNF reprocessing solvent systems. Consequently, a thorough understanding of metal ion complexation effects on the radiolytic integrity of UNF complexants is essential to evaluate their potential for process application. Presented here are two recent studies from the Idaho National Laboratory Center for Radiation Chemistry Research group that demonstrate the various impacts of f-element complexation (uranium, americium, and lanthanides) on the radiolytic integrity (gamma and electron pulse) of tributyl phosphate (TBP), N,N-di-(2-ethylhexyl)butyramide (DEHBA), N,N-di-2-ethylhexylisobutryamide (DEHiBA), and 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (HEH[EHP]) under UNF reprocessing conditions. References 1) Bhattacharyya and Kundu, Int. J. Radiat. Phys. Chem., 1971, 3, 1. 2) Kundu and Matuura, Int. J. Radiat. Phys. Chem., 1975, 7, 565. 3) Ilan and Czapski, Biochimica et Biophysica Acta, 1977, 498, 386. 4) Buettner, Doherty, and Patterson, Fed. Euro. Biochem. Soc., 1983, 158 (1), 143. 5) Toigawa, Peterman, Meeker, Grimes, Zalupski, Mezyk, Cook, Yamashita, Kumagai, Matsumura, Horne, PCCP, 2021, 23, 1343.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

Formation and growth of cerium (III) oxalate nanocrystals by liquid-cell transmission electron microscopy

Using rare earth elements as analogs for actinide series elements enables studying the chemistry of these radioactive materials without the inherent risks. A fundamental understanding of the nucleation and growth of actinide oxalates is crucial for processing nuclear waste. Using in-situ liquid cell TEM (LC-TEM), we show particle attachment processes occurring during the nucleation and growth of cerium oxalate. The early stages of the observed non-classical growth mechanisms have important implications for particle evolution and predictions of final particle morphology. In this work, we observed particle formation via monomer-by-monomer addition or the particle aggregation pathway depending on the selected precursor concentration. At the highest precursor concentration at a high dose rate, we observed particle alignment in a branch structure is due to the interfacial instability. It was demonstrated that in-situ LC-TEM is an invaluable tool in studying the cerium oxalate formation and ultimately a path to understanding actinide chemistry.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Impact of Actinide Complexation on Ligand Radiolysis

Although the actinides boast many unique physical and chemical properties, their inherent susceptibility to radioactive decay are what make them truly interesting elements to study. The absorption of ionizing radiation from actinide decay leads to the formation of a variety of transient and steady-state radicals, ions, and molecular radiolysis products that can lead to significant changes in the surrounding environment, and ultimately dictate steady-state actinide redox distributions and the longevity of molecules designed for actinide complexation. Radiolysis of the latter leads to complexant destruction and the concomitant formation of degradation products that can complicate actinide studies and processes. However, the radiation chemistry of most actinide complexants have been studied in the absence of the actinides they were designed to complex, which can lead to inaccurate conclusions on longevity and degradation product distributions, as metal ion complexation has been historically shown to influence a ligand’s radiolytic behavior. Consequently, bridging this knowledge gap is important for actinide science. Here, I will discuss the impact of actinide complexation on the steady-state and time-resolved radiation-induced reactivity of a variety of complexants, including, tributyl phosphate (TBP) and N,N,N',N'-tetraoctyl diglycolamide (TODGA) .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Streamlining and Simplifying the Chemical Separationof Berkelium (249Bk) from Other Actinides/Lanthanides andFission Products

Abstract Separation of an individual heavy actinide from other actinides, lanthanides, and coproduced fission products is challenging not only because of their similarity in chemistry but also because the chemistry of heavy actinides is largely unknown. At present, the cation-exchange chromatography with α-hydroxyisobutyric acid (CX-AHIB) method is used to isolate milli- to picogram quantities of heavy actinides (i.e., 249Bk, 252Cf, 254Es, and 257Fm). This method allows simultaneous separation of these actinides; however, isolating a clean individual product with a high yield has proven challenging. The process is also very slow and labor-intensive and requires precise control of various chemical conditions, such as pH, temperature, and AHIB concentration. Developing a separation scheme for heavy actinides requires identifying their unique feature and then harnessing this feature in the separation process design. The unique characteristic of Bk4+ is that it does not adsorb onto anion exchange resin columns, unlike other tetravalent actinides. This article discusses what makes Bk unique and how this discovery led to a new method for separating Bk from adjacent actinides, lanthanides, and coproduced fission products. The method employed two different resin columns in tandem to separate unwanted actinides from 249Bk, followed by fine cleanup of 249Bk. The advantages of the new Bk method over the CX-AHIB method in Bk production are discussed, and the performance and robustness of the proposed method were assessed in two recent production campaigns.

Chemistry↗
DOE OSTI2022

Transient Radiation-Induced Berkelium(III) and Californium(III) Redox Chemistry in Aqueous Solution

Despite the significant impact of radiation-induced redox reactions on the accessibility and lifetimes of actinide oxidation states, fundamental knowledge of aqueous actinide metal ion radiation chemistry is limited, especially for the late actinides. A quantitative understanding of these intrinsic radiation-induced processes is essential for investigating the fundamental properties of these actinides. We present here a picosecond electron pulse reaction kinetics study into the radiation-induced redox chemistry of trivalent berkelium (Bk(III)) and californium (Cf(III)) ions in acidic aqueous solutions at ambient temperature. New, and first of a kind, second-order rate coefficients are reported for the transient radical-induced reduction of Bk(III) and Cf(III) by the hydrated electron (eaq−) and hydrogen atom (H•), demonstrating significant reactivity (up to 1011M-1s-1) indicative of a preference of these metals to adopt divalent states. Additionally, we reportthe first-ever second-order rate coefficients for the transient radical-induced oxidation of these elements by reaction with hydroxyl (•OH) and nitrate (NO3•) radicals, which also exhibited fast reactivity (ca. 108 M-1s-1). Transient Cf(II), Cf(IV), and Bk(IV) absorption spectra are also reported. Overall, the presented data highlight the existence of rich, complex, intrinsic late actinide radiation-induced redox chemistry that has the potential to influence the findings of other areas of actinide science.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Exploring Actinide Nanocrystal Growth towards Defining 5f Surface Chemistry (Final Technical Report)

When particles are very small, down to the nanometer length scale, they display unusual properties not typical of larger materials. Most of the atoms in these structures are at the surface of the particles, which give them different electronic properties. While these unusual properties have been studied in most of the periodic table, little is known about how the electronic properties of the actinides, such as neptunium and plutonium, behave when they become so small. This planned research will study growth pathways of actinide nanoscale particles. Interestingly, the shapes of the particles change depending on the specific actinide species, spanning from thorium through americium, despite having otherwise identical arrangements of atoms. This project will use differences in the shapes and growth pathways of different actinide particles to learn about trends in electronic properties at surfaces across the actinide row. Growth pathways will be determined using a combination of synthesis and the use of advanced X-ray characterization tools. These X-ray characterization tools can provide information about electronic properties and also local bonding characteristics. This project will also inform how to make unprecedented actinide oxide nanoparticles using very small quantities of material. This will enable safe working with radioactive materials and the study of materials that never before have been made into nanoparticles. Meanwhile, students will be trained in working with these exotic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Contrasting Trivalent Lanthanide and Actinide Complexation by Polyoxometalates via Solution-State NMR

Deciphering the solution chemistry and speciation of actinides is inherently difficult due to radioactivity, rarity, and cost constraints, especially for transplutonium elements. In this context, the development of new chelating platforms for actinides and associated spectroscopic techniques is particularly important. In this study, we investigate a relatively overlooked class of chelators for actinide binding, namely, polyoxometalates (POMs). We provide the first NMR measurements on americium–POM and curium–POM complexes, using one-dimensional (1D) 31 P NMR, variable-temperature NMR, and spin-lattice relaxation time (T 1 ) experiments. The proposed POM–NMR approach allows for the study of trivalent f-elements even when only microgram amounts are available and in phosphate-containing solutions where f-elements are typically insoluble. The solution-state speciation of trivalent americium, curium, plus multiple lanthanide ions (La 3+ , Nd 3+ , Sm 3+ , Eu 3+ , Yb 3+ , and Lu 3+ ), in the presence of the model POM ligand PW 11 O 39 7– was elucidated and revealed the concurrent formation of two stable complexes, [M III (PW 11 O 39 )(H 2 O) x ] 4– and [M III (PW 11 O 39 ) 2 ] 11– . Interconversion reaction constants, reaction enthalpies, and reaction entropies were derived from the NMR data. The NMR results also provide experimental evidence of the weakly paramagnetic nature of the Am 3+ and Cm 3+ ions in solution. Furthermore, the study reveals a previously unnoticed periodicity break along the f-element series with the reversal of T 1 relaxation times of the 1:1 and 1:2 complexes and the preferential formation of the long T 1 species for the early lanthanides versus the short T 1 species for the late lanthanides, americium, and curium. Furthermore, given the broad variety of POM ligands that exist, with many of them containing NMR-active nuclei, the combined POM–NMR approach reported here opens a new avenue to investigate difficult-to-study elements such as heavy actinides and other radionuclides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Ligand‐Directed Actinide Oxo‐Bond Manipulation in Actinyl Thiacalix[4]arene Complexes

Understanding the chemistry of the inert actinide oxo bond in actinyl ions AnO2 2+ is important for controlling actinide behavior in the environment, during separations, and in nuclear waste (An=U, Np, Pu). The thioether calixarene TC4A (4-tert-butyltetrathiacalix[4]arene) binds equatorially to the actinyl cation forming a conical pocket that differentiates the two trans-oxo groups. The 'ate' complexes, [A]2[UO2(TC4A)] (A=[Li(DME)2], HNEt3) and [HNEt3]2[AnO2(TC4A)] (An=U, Np, Pu), enable selective oxo chemistry. Silylation of the UVI oxo groups by bis(trimethylsilyl)pyrazine occurs first at only the unencapsulated exo oxo and only one silylation is needed to enable migration of the endo oxo out of the cone, whereupon a second silylation affords the stable UIV cis-bis(siloxide) [A]2[U(OSiMe3)2(TC4A)]. Calculations confirm that only one silylation event is needed to initiate oxo rearrangement, and that the putative cis dioxo isomer of [UO2(TC4A)]2- would be stable if it could be accessed synthetically, at only 23 kcal.mol-1 in energy above the classical trans dioxo. Calculations for the transuranic cis[AnO2(TC4A)]2- (An=Np, Pu) are at higher energies, 30-35 kcal.mol-1, retaining the U complexes as the more obvious target for a cis-dioxo actinyl ion. The aryloxide (OAr) groups of the macrocycle are essential in stabilizing this as-yet unseen uranyl geometry as further bonding in the TC4A U-OAr groups stabilizes the U=O 'yl' bonds, explaining the stability of the putative cis[UO2(TC4A)]2- in this ligand framework.

Pyrch, Mikaela M↗
DOE OSTI2024

Purification Techniques for Actinide Radiolysis Studies

Our fundamental understanding of actinide radiation-induced redox chemistry is crucial due to their unavoidable exposure to ionizing radiation fields, both inherent and from in-process applications. Plutonium (Pu) and americium (Am) both possess multiple oxidation states, the careful manipulation of which are essential in the study and utilization of their rich chemistry, developing new technologies, and securing the long-term sustainability of nuclear power. However, knowledge in this area is far from complete. We have studied the radiation-induced chemistry of both Pu and Am through a variety of techniques, including gamma irradiation, in-situ alpha irradiation and pulse radiolysis experiments. However, for the collection of accurate data, thorough purification and quantification of actinide-containing solutions is required. This presentation will cover the purification and quantification techniques employed for the radiolysis experiments described in our recent publications: Kynman et al., Multiscale Modeling of Plutonium Radiation Chemistry in Nitric Acid Solutions. 1. Cobalt-60 Gamma Irradiation of Pu(IV) [https://pubs.acs.org/doi/10.1021/acs.inorgchem.4c00138] and Kynman et al., Generation and Study of Am(IV) by Temperature-Controlled Electron Pulse Radiolysis [https://doi.org/10.1039/D4DT00991F].

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Impact of trivalent f-element complexation and chemical environment on the radiation-induced chemical reactivity of TODGA and HOPO ligands

Understanding the impact of ionizing radiation on ligands employed and proposed for the separation, recovery, and transport of actinide ions is of vital importance for the innovation of nuclear fuel cycle technologies. In the presence of ionizing radiation fields, complexing ligands are subject to radiolytic processes, that lead to their destruction and the formation of potentially detrimental degradation products. Consequently, mastery of the radiation-induced behavior of these ligands is essential for predicting and optimizing their effectiveness, longevity, and minimizing the negative impacts of radiolysis. Furthermore, this knowledge is critical for the design of more radiation resistant molecules to be incorporated into advanced separation technologies. That said, the radiation chemistry of most actinide complexants have only been studied in the absence of their targeted metal ion complexes, which can lead to inaccurate conclusions on their radiolytic robustness and impacts on performance. With this in mind, we present our findings on the impact of f-element complexation and chemical environment on the radiation-induced chemical reactivity of N,N,N',N'-tetraoctyl diglycolamide (TODGA) and the model octadentate hydroxypyridinone ligand 3,4,3-LI(1,2-HOPO) (abbreviated as HOPO), both promising candidates for actinide separations

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Ligand‐Directed Actinide Oxo‐Bond Manipulation in Actinyl Thiacalix[4]arene Complexes

Abstract Understanding the chemistry of the inert actinide oxo bond in actinyl ions AnO 2 2+ is important for controlling actinide behavior in the environment, during separations, and in nuclear waste (An=U, Np, Pu). The thioether calixarene TC4A (4‐ tert ‐butyltetrathiacalix[4]arene) binds equatorially to the actinyl cation forming a conical pocket that differentiates the two trans‐ oxo groups. The ‘ate’ complexes, [A] 2 [UO 2 (TC4A)] (A=[Li(DME) 2 ], HNEt 3 ) and [HNEt 3 ] 2 [AnO 2 (TC4A)] (An=U, Np, Pu), enable selective oxo chemistry. Silylation of the U VI oxo groups by bis(trimethylsilyl)pyrazine occurs first at only the unencapsulated exo oxo and only one silylation is needed to enable migration of the endo oxo out of the cone, whereupon a second silylation affords the stable U IV cis‐ bis(siloxide) [A] 2 [U(OSiMe 3 ) 2 (TC4A)]. Calculations confirm that only one silylation event is needed to initiate oxo rearrangement, and that the putative cis dioxo isomer of [UO 2 (TC4A)] 2− would be stable if it could be accessed synthetically, at only 23 kcal.mol −1 in energy above the classical trans dioxo. Calculations for the transuranic cis [AnO 2 (TC4A)] 2− (An=Np, Pu) are at higher energies, 30–35 kcal.mol −1 , retaining the U complexes as the more obvious target for a cis ‐dioxo actinyl ion. The aryloxide (OAr) groups of the macrocycle are essential in stabilizing this as‐yet unseen uranyl geometry as further bonding in the TC4A U‐O Ar groups stabilizes the U=O ‘yl’ bonds, explaining the stability of the putative cis [UO 2 (TC4A)] 2− in this ligand framework.

Pyrch, Mikaela M. [College of Chemistry University↗
DOE OSTI2025

Direct identification of Ac and No molecules with an atom-at-a-time technique

The periodic table provides an intuitive framework for understanding chemical properties. However, its traditional patterns may break down for the heaviest elements occupying the bottom of the chart. Here, the large nuclei of actinides (Z > 88) and superheavy elements (Z ≥ 104) give rise to relativistic effects that are expected to substantially alter their chemical behaviours, potentially indicating that we have reached the end of a predictive periodic table. Relativistic effects have already been cited for the unusual chemistry of the actinides compared with those of their lanthanide counterparts. Unfortunately, it is difficult to understand the full impact of relativistic effects, as research on the later actinides and superheavy elements is scarce. Beyond fermium (Z = 100), elements need to be produced and studied one atom at a time, using accelerated ion beams and state-of-the-art experimental approaches. So far, no experiments have been capable of directly identifying produced molecular species. Here ions of actinium (Ac, Z = 89) and nobelium (No, Z = 102) were synthesized through nuclear reactions at the 88-Inch Cyclotron facility at Lawrence Berkeley National Laboratory and then exposed to trace amounts of H 2 O and N 2 . The produced molecular species were directly identified by measuring their mass-to-charge ratios using FIONA (For the Identification Of Nuclide A). These results mark the first, to our knowledge, direct identification of heavy-element molecular species using an atom-at-a-time technique and highlight the importance of such identifications in future superheavy-element chemistry experiments to deepen understanding of their chemical properties.

Pore, Jennifer L. [Lawrence Berkeley National Labo↗