Search NASA⌕ Search

SEARCH · Search NASA

Results for “active source”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11

A COMPARISON OF THE INITIAL SPEED OF CORONAL MASS EJECTIONS WITH THE MAGNETIC FLUX AND MAGNETIC HELICITY OF MAGNETIC CLOUDS

To investigate the relationship between the speed of a coronal mass ejection (CME) and the magnetic energy released during its eruption, we have compared the initial speed of CMEs (V{sub CME}) and the two parameters of their associated magnetic clouds (MC), magnetic flux (F{sub MC}), and magnetic helicity per unit length (|H{sub MC}|/L), for 34 pairs of CMEs and MCs. The values of these parameters in each MC have been determined by fitting the magnetic data of the MC to the linear force-free cylindrical model. As a result, we found that there are positive correlations between V {sup 2}{sub CME} and F{sub MC}, and between V{sup 2} {sub CME} and |H{sub MC}|/L. It is also found that the kinetic energy of CMEs (E{sub CME}) is correlated with F{sub MC} and |H{sub MC}|/L of the associated MC. In contrast, we found no significant correlation between (V{sub MC}){sup 2} and F{sub MC}, nor between (V{sub MC}){sup 2} and |H{sub MC}|/L. Our results support the notion that the eruption of a CME is related to the magnetic helicity of the source active region.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

THE WFC3 INFRARED SPECTROSCOPIC PARALLEL (WISP) SURVEY

We present the WFC3 Infrared Spectroscopic Parallel (WISP) Survey. WISP is obtaining slitless, near-infrared grism spectroscopy of {approx}90 independent, high-latitude fields by observing in the pure-parallel mode with the Wide Field Camera Three on the Hubble Space Telescope for a total of {approx}250 orbits. Spectra are obtained with the G{sub 102} ({lambda} = 0.8-1.17 {mu}m, R {approx}210) and G{sub 141} grisms ({lambda} = 1.11-1.67 {mu}m, R {approx}130), together with direct imaging in the J and H bands (F110W and F140W, respectively). In the present paper, we present the first results from 19 WISP fields, covering approximately 63 arcmin{sup 2}. For typical exposure times ({approx}6400 s in G{sub 102} and {approx}2700 s in G{sub 141}), we reach 5{sigma} detection limits for emission lines of f {approx} 5 x 10{sup -17} erg s{sup -1} cm{sup -2} for compact objects. Typical direct imaging 5{sigma} limits are 26.3 and 26.1 mag. (AB) in F110W and F140W, respectively. Restricting ourselves to the lines measured with the highest confidence, we present a list of 328 emission lines, in 229 objects, in a redshift range 0.3 < z < 3. The single-line emitters are likely to be a mix of H{alpha} and [O III]5007,4959 A, with H{alpha} predominating. The overall surface density of high-confidence emission-line objects in our sample is approximately 4 per arcmin{sup 2}. These first fields show high equivalent width sources, active galactic nucleus, and post-starburst galaxies. The median observed star formation rate (SFR) of our H{alpha}-selected sample is 4 M{sub sun} yr{sup -1}. At intermediate redshifts, we detect emission lines in galaxies as faint as H{sub 140} {approx} 25, or M{sub R} < -19, and are sensitive to SFRs down to less than 1 M{sub sun} yr{sup -1}. The slitless grisms on WFC3 provide a unique opportunity to study the spectral properties of galaxies much fainter than L* at the peak of the galaxy assembly epoch.

79 ASTRONOMY AND ASTROPHYSICS↗

THE RADIO ACTIVITY-ROTATION RELATION OF ULTRACOOL DWARFS

We present a new radio survey of about 100 late-M and L dwarfs undertaken with the Very Large Array. The sample was chosen to explore the role of rotation in the radio activity of ultracool dwarfs. As part of the survey we discovered radio emission from three new objects, 2MASS J 0518113 - 310153 (M6.5), 2MASS J 0952219 - 192431 (M7), and 2MASS J 1314203 + 132001 (M7), and made an additional detection of LP 349-25 (M8). Combining the new sample with results from our previous studies and from the literature, we compile the largest sample to date of ultracool dwarfs with radio observations and measured rotation velocities (167 objects). In the spectral type range M0-M6 we find a radio activity-rotation relation, with saturation at L{sub rad}/L{sub bol} Almost-Equal-To 10{sup -7.5} above vsin i Almost-Equal-To 5 km s{sup -1}, similar to the relation in H{alpha} and X-rays. However, at spectral types {approx}> M7 the ratio of radio to bolometric luminosity increases significantly regardless of rotation velocity, and the scatter in radio luminosity increases. In particular, while the most rapid rotators (vsin i {approx}> 20 km s{sup -1}) exhibit 'super-saturation' in X-rays and H{alpha}, this effect is not seen in the radio. We also find that ultracool dwarfs with vsin i {approx}> 20 km s{sup -1} have a higher radio detection fraction by about a factor of three compared to objects with vsin i {approx}< 10 km s{sup -1}. When measured in terms of the Rossby number (Ro), the radio activity-rotation relation follows a single trend and with no apparent saturation from G to L dwarfs and down to Ro {approx} 10{sup -3}; in X-rays and H{alpha} there is clear saturation at Ro {approx}< 0.1, with super-saturation beyond M7. A similar trend is observed for the radio surface flux (L{sub rad}/R{sup 2}{sub *}) as a function of Ro. The continued role of rotation in the overall level of radio activity and in the fraction of active sources, and the single trend of L{sub rad}/L{sub bol} and L{sub rad}/R{sup 2}{sub *} as a function of Ro from G to L dwarfs, indicates that rotation effects are important in regulating the topology or strength of magnetic fields in at least some fully convective dwarfs. The fact that not all rapid rotators are detected in the radio provides additional support to the idea of dual dynamo states proposed from spectropolarimetric observations.

79 ASTRONOMY AND ASTROPHYSICS↗

INITIATION AND DEVELOPMENT OF THE WHITE-LIGHT AND RADIO CORONAL MASS EJECTION ON 2001 APRIL 15

The 2001 April 15 event was one of the largest of the last solar cycle. A former study established that this event was associated with a coronal mass ejection (CME) observed both at white light and radio frequencies. This radio CME is illuminated by synchrotron emission from relativistic electrons. In this paper, we investigate the relation of the radio CME to its extreme-ultraviolet (EUV) and white-light counterpart and reach four main conclusions. (1) The radio CME corresponds to the white-light flux rope cavity. (2) The presence of a reconnecting current sheet behind the erupting flux rope is framed, both from below and above, by bursty radio sources. This reconnection is the source of relativistic radiating electrons which are injected down along the reconnected coronal arches and up along the flux rope border forming the radio CME. (3) Radio imaging reveals an important lateral overexpansion in the low corona; this overexpansion is at the origin of compression regions where type II and III bursts are imaged. (4) Already in the initiation phase, radio images reveal large-scale interactions of the source active region (AR) with its surroundings, including another AR and open magnetic fields. Thus, these complementary radio, EUV, and white-light data validate the flux rope eruption model of CMEs.

79 ASTRONOMY AND ASTROPHYSICS↗

AN EXTREME-ULTRAVIOLET WAVE ASSOCIATED WITH A SURGE

Taking advantage of the high temporal and spatial resolution observations from the Solar Dynamics Observatory, we present an extreme-ultraviolet (EUV) wave associated with a surge on 2010 November 13. Due to the magnetic flux cancelation, some surges formed in the source active region (AR). The strongest surge produced our studied event. The surge was deflected by the nearby loops that connected to another AR, and disrupted the overlying loops that slowly expanded and eventually evolved into a weak coronal mass ejection (CME). The surge was likely associated with the core of the CME. The EUV wave happened after the surge deflected. The wave departed far from the flare center and showed a close location relative to the deflected surge. The wave propagated in a narrow angular extent, mainly in the ejection direction of the surge. The close timing and location relations between the EUV wave and the surge indicate that the wave was closely associated with the CME. The wave had a velocity of 310-350 km s{sup -1}, while the speeds of the surge and the expanding loops were about 130 and 150 km s{sup -1}, respectively. All of the results suggest that the EUV wave was a fast-mode wave and was most likely triggered by the weak CME.

79 ASTRONOMY AND ASTROPHYSICS↗

THE DUST ENVIRONMENT OF COMET 29P/SCHWASSMANN-WACHMANN 1 FROM DUST TAIL MODELING OF 2004 NEAR-PERIHELION OBSERVATIONS

A Monte Carlo inverse dust tail modeling of ground-based images of comet 29P/Schwasssmann-Wachmann 1 has been performed. The images of the comet were acquired on several nights in 2004 July, a few days after the 2004 perihelion passage. The analysis takes into account the rotation properties of the comet, incorporating dust ejection from active areas on the nucleus surface. We demonstrate that these models provide a significant improvement over models with a fixed sunward hemispherical particle emission cone, owing to the observed coma asymmetry, giving an excellent fit to the observed intensity isophote fields. The rotation parameters, defined by the argument of the subsolar meridian at perihelion, {phi}, and the obliquity, I, are found to be compatible with those derived by Sekanina from morphological studies ({phi} = 279 deg. and I = 100 deg.). We found that if dust emission is assumed to be produced by a single active area driven by insolation, this must then be located on the southern hemisphere near -35{sup 0} latitude. We have devised a method to impose Af{rho}(t) constraints the overdetermined system of equations leading to the solution of the dust mass loss rates and size distribution function. When those constraints are applied, the time-averaged particle size distribution function was found to be characterized by a power law of index in the range -3.7 to -3.3, and a dust loss mass rate approximately in the nominal range of 300-900 kg s{sup -1}, depending on the different model approaches, and for an albedo time the phase function of 0.1, confirming the fact that this comet is perhaps the most active source of interplanetary dust, providing some 3%-10% of the mass required to replenish the losses of the interplanetary dust cloud if it is in a steady state.

79 ASTRONOMY AND ASTROPHYSICS↗

CASE STUDY OF FOUR HOMOLOGOUS LARGE-SCALE CORONAL WAVES OBSERVED ON 2010 APRIL 28 AND 29

On 2010 April 28 and 29, the Solar TErrestrial Relations Observatory B/Extreme Ultraviolet Imager observed four homologous large-scale coronal waves, the so-called EIT-waves, within 8 hr. All waves emerged from the same source active region, were accompanied by weak flares and faint coronal mass ejections, and propagated into the same direction at constant velocities in the range of {approx}220-340 km s{sup -1}. The last of these four coronal wave events was the strongest and fastest, with a velocity of 337 {+-} 31 km s{sup -1} and a peak perturbation amplitude of {approx}1.24, corresponding to a magnetosonic Mach number of M{sub ms} {approx} 1.09. The magnetosonic Mach numbers and velocities of the four waves are distinctly correlated, suggestive of the nonlinear fast-mode magnetosonic wave nature of the events. We also found a correlation between the magnetic energy buildup times and the velocity and magnetosonic Mach number.

79 ASTRONOMY AND ASTROPHYSICS↗

OBSERVING FLUX ROPE FORMATION DURING THE IMPULSIVE PHASE OF A SOLAR ERUPTION

Magnetic flux ropes are believed to be an important structural component of coronal mass ejections (CMEs). While there exists much observational evidence of flux ropes after the eruption, e.g., as seen in remote-sensing coronagraph images or in situ solar wind data, the direct observation of flux ropes during CME impulsive phase has been rare. In this Letter, we present an unambiguous observation of a flux rope still in the formation phase in the low corona. The CME of interest occurred above the east limb on 2010 November 3 with footpoints partially blocked. The flux rope was seen as a bright blob of hot plasma in the Atmospheric Imaging Assembly (AIA) 131 A passband (peak temperature {approx}11 MK) rising from the core of the source active region, rapidly moving outward and stretching the surrounding background magnetic field upward. The stretched magnetic field seemed to curve-in behind the core, similar to the classical magnetic reconnection scenario in eruptive flares. On the other hand, the flux rope appeared as a dark cavity in the AIA 211 A passband (2.0 MK) and 171 A passband (0.6 MK); in these relatively cool temperature bands, a bright rim clearly enclosed the dark cavity. The bright rim likely represents the pileup of the surrounding coronal plasma compressed by the expanding flux rope. The composite structure seen in AIA multiple temperature bands is very similar to that in the corresponding coronagraph images, which consists of a bright leading edge and a dark cavity, commonly believed to be a flux rope.

79 ASTRONOMY AND ASTROPHYSICS↗

PRISM3D: a 3-D reference seismic model for Iberia and adjacent areas

SUMMARY We present PRISM3D, a 3-D reference seismic model of P- and S-wave velocities for Iberia and adjacent areas. PRISM3D results from the combination of the most up-to-date earth models available for the region. It extends horizontally from 15°W to 5°E in longitude, 34°N to 46°N in latitude and vertically from 3.5 km above to 200 km below sea level, and is modelled on a regular grid with 10 and 0.5 km of grid node spacing in the horizontal and vertical directions, respectively. It was designed using models inferred from local and teleseismic body-wave tomography, earthquake and ambient noise surface wave tomography, receiver function analysis and active source experiments. It includes two interfaces, namely the topography/bathymetry and the Mohorovičić (Moho) discontinuity. The Moho was modelled from previously published receiver function analysis and deep seismic sounding results. To that end we used a probabilistic surface reconstruction algorithm that allowed to extract the mean of the Moho depth surface along with its associated standard deviation, which provides a depth uncertainty estimate. The Moho depth model is in good agreement with previously published models, although it presents slightly sharper gardients in orogenic areas such as the Pyrenees or the Betic-Rif system. Crustal and mantle P- and S-wave wave speed grids were built separately on each side of the Moho depth surface by weighted average of existing models, thus allowing to realistically render the speed gradients across that interface. The associated weighted standard deviation was also calculated, which provides an uncertainty estimation on the average wave speed values at any point of the grid. At shallow depths (<10 km), low P and S wave speeds and high VP/VS are observed in offshore basins, while the Iberian Massif, which covers a large part of western Iberia, appears characterized by a rather flat Moho, higher than average VP and VS and low VP/VS. Conversely, the Betic-Rif system seems to be associated with low VP and VS, combined with high VP/VS in comparison to the rest of the study area. The most prominent feature of the mantle is the well known high wave speed anomaly related to the Alboran slab imaged in various mantle tomography studies. The consistency of PRISM3D with previous work is verified by comparing it with two recent studies, with which it shows a good general agreement.The impact of the new 3-D model is illustrated through a simple synthetic experiment, which shows that the lateral variations of the wave speed can produce traveltime differences ranging from –1.5 and 1.5 s for P waves and from –2.5 and 2.5 s for S waves at local to regional distances. Such values are far larger than phase picking uncertainties and would likely affect earthquake hypocentral parameter estimations. The new 3-D model thus provides a basis for regional studies including earthquake source studies, Earth structure investigations and geodynamic modelling of Iberia and its surroundings.

Arroucau, P.↗

Phase-weighted slant stacking for surface wave dispersion measurement

SUMMARY Surface wave retrieval from ambient noise records using seismic interferometry techniques has been widely used for multiscale shear wave velocity (Vs) imaging. One key step during Vs imaging is the generation of dispersion spectra and the extraction of a reliable dispersion curve from the retrieved surface waves. However, the sparse array geometry usually affects the ability for high-frequency (>1 Hz) seismic signals’ acquisition. Dispersion measurements are degraded by array response due to sparse sampling and often present smeared dispersion spectra with sidelobe artefacts. Previous studies usually focus on interferograms’ domain (e.g. cross-correlation function) and attempt to enhance coherent signals before dispersion measurement. We propose an alternative technique to explicitly deblur dispersion spectra through use of a phase-weighted slant-stacking algorithm. Numerical examples demonstrate the strength of the proposed technique to attenuate array responses as well as incoherent noise. Three different field examples prove the flexibility and superiority of the proposed technique: the first data set consists of ambient noise records acquired using a nodal seismometer array; the second data set utilizes distributed acoustic sensing (DAS) and a marine fibre-optic cable to acquire a similar ambient noise data set; the last data set is a vibrator-based active-source surface wave data. The enhanced dispersion measurements provide cleaner and higher-resolution spectra without distortions which will assist both human interpreters as well as ML algorithms in efficiently picking curves for subsequent Vs inversion.

58 GEOSCIENCES↗

Ground motion response to an ML 4.3 earthquake using co-located distributed acoustic sensing and seismometer arrays

The PoroTomo research team deployed two arrays of seismic sensors in a natural laboratory at Brady Hot Springs, Nevada in March 2016. The 1500 m (length) by 500 m (width) by 400 m (depth) volume of the laboratory overlies a geothermal reservoir. The surface Distributed Acoustic Sensing (DAS) array consisted of 8700 m of fiber-optic cable in a shallow trench, including 340 m in a well. The conventional seismometer array consisted of 238 three- component geophones. The DAS cable was laid out in three parallel zig-zag lines with line segments approximately 100 meters in length and geophones were spaced at approximately 60- meter intervals. Both DAS and conventional geophones recorded continuously over 15 days during which a moderate-sized earthquake with a local magnitude of 4.3 was recorded on March 21, 2016. Its epicenter was approximately 150-km south-southeast of the laboratory. Several DAS line segments with co-located geophone stations were used to compare signal-to-noise (SNR) ratios in both time and frequency domains and to test relationships between DAS and geophone data. The ratios were typically within a factor of five of each other with DAS SNR often greater for P-wave but smaller for S-wave relative to geophone SNR. The SNRs measured for an earthquake can be better than for active sources, because the earthquake signal contains more low frequency energy and the noise level is also lower at those lower frequencies. Amplitudes of the sum of several DAS strain-rate waveforms matched the finite difference of two geophone waveforms reasonably well, as did the amplitudes of DAS strain waveforms with particle-velocity waveforms recorded by geophones. Similar agreement was found between DAS and geophone observations and synthetic strain seismograms. In conclusion, the combination of good SNR in the seismic frequency band, high-spatial density, large N, and highly accurate time control among individual sensors suggests that DAS arrays have potential to assume a role in earthquake seismology.

60 signal-to-noise ratio↗

Using Atmospheric Dispersion Theory to Inform the Design of a Short-lived Radioactive Particle Release Experiment

Atmospheric dispersion theory can be used to predict ground deposition of particulates downwind of a radionuclide release. This paper utilizes standard formulations found in Gaussian plume models to inform the design of an experimental release of short-lived radioactive particles into the atmosphere. Specifically, a source depletion algorithm is used to determine the optimum particle size and release height that maximizes the near-field deposition while minimizing the both the required source activity and the fraction of activity lost to long-distance transport. The purpose of the release is to provide a realistic deposition pattern that might be observed downwind of a small-scale vent from an underground nuclear explosion. The deposition field will be used, in part, to investigate several techniques of gamma radiation survey and spectrometry that could be utilized by an On-Site Inspection team under the verification regime of the Comprehensive Nuclear-Test-Ban Treaty.

Atmospheric dispersion↗

Changing the scattering of sheltered targets

In this paper, we propose a kind of illusion cloak that does not provide invisibility but instead changes the scattering of a coated target to that of a totally different one. Different from other illusion cloaks such as those based on 'anti-object' or active sources, the proposed one is independent of the information of concealed targets or incident waves and can reshape the scattering of any targets. In addition, we also provide a general method to imitate arbitrary conductor line segments, as a special case of conductor reshaper. Electromagnetic (EM) simulations by a finite-element solver on detailed examples have been carried to validate the design.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Precise measurement of α K and α T for the 39.8-keV E 3 transition in Rh 103 : Test of internal-conversion theory

Neutron-activated sources of 103 Ru and 103 Pd both share the isomeric first-excited state in 103 Rh as a daughter product. From independent measurements of both decays, we have measured the K shell and total internal-conversion coefficients, α K and α T , for the 39.8-keV E3 transition, which de-excites that state in 103 Rh, to be 141.1(23) and 1428(13), respectively. When compared with Dirac-Fock calculations, our new results disagree with the version of the theory that ignores the K-shell atomic vacancy, which is consistent with our conclusion drawn from a series of measurements on high multipolarity transitions in nuclei with higher Z. Calculations that include the atomic vacancy indicate that the transition actually has a small M4 component with mixing ratio δ = 0.023(5).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Size-Tuned Plastic Flow Localization in Irradiated Materials at the Submicron Scale

Three-dimensional discrete dislocation dynamics (3D-DDD) simulations reveal that, with reduction of sample size in the submicron regime, the mechanism of plastic flow localization in irradiated materials transitions from irradiation-controlled to an intrinsic dislocation source controlled. Furthermore, the spatial correlation of plastic deformation decreases due to weaker dislocation interactions and less frequent cross slip as the system size decreases, thus manifesting itself in thinner dislocation channels. A simple model of discrete dislocation source activation coupled with cross slip channel widening is developed to reproduce and physically explain this transition. In order to quantify the phenomenon of plastic flow localization, we introduce a “deformation localization index,” with implications to the design of radiation-resistant materials.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Temperature dependence of APD-based PET scanners

Purpose: Solid state detectors such as avalanche photodiodes (APDs) are increasingly being used in PET detectors. One of the disadvantages of APDs is the strong decrease of their gain factor with increasing ambient temperature. The light yield of most scintillation crystals also decreases when ambient temperature is increased. Both effects lead to considerable temperature dependence of the performance of APD-based PET scanners. In this paper, the authors propose a model for this dependence and the performance of the LabPET8 APD-based small animal PET scanner is evaluated at different temperatures.Methods: The model proposes that the effect of increasing temperature on the energy histogram of an APD-based PET scanner is a compression of the histogram along the energy axis. The energy histogram of the LabPET system was acquired at 21 °C and 25 °C to verify the validity of this model. Using the proposed model, the effect of temperature on system sensitivity was simulated for different detector temperature coefficients and temperatures. Subsequently, the effect of short term and long term temperature changes on the peak sensitivity of the LabPET system was measured. The axial sensitivity profile was measured at 21 °C and 24 °C following the NEMA NU 4-2008 standard. System spatial resolution was also evaluated. Furthermore, scatter fraction, count losses and random coincidences were evaluated at different temperatures. Image quality was also investigated.Results: As predicted by the model, the photopeak energy at 25 °C is lower than at 21 °C with a shift of approximately 6% per °C. Simulations showed that this results in an approximately linear decrease of sensitivity when temperature is increased from 21 °C to 24 °C and energy thresholds are constant. Experimental evaluation of the peak sensitivity at different temperatures showed a strong linear correlation for short term (2.32 kcps/MBq/°C = 12%/°C, R = −0.95) and long term (1.92 kcps/MBq/°C = 10%/°C , R = −0.96) temperature changes. Count rate evaluation showed that although the total count rate is consistently higher at 21 °C than at 24 °C for different source activity concentrations, this is mainly due to an increase in scattered and random coincidences. The peak total count rate is 400 kcps at both temperatures but is reached at lower activity at 21 °C. The peak true count rate is 138 kcps (at 100 MBq) at 21 °C and 180 kcps (at 125 MBq) at 24 °C. The peak noise equivalent count rate is also lower at 21 °C (70 kcps at 70 MBq) than at 24 °C (100 kcps at 100 MBq). At realistic activity levels, the scatter fraction is lower at higher temperatures, but at the cost of a strong decrease in true count rate.Conclusions: A model was proposed for the temperature dependence of APD-based PET scanners and evaluated using the LabPET small animal PET scanner. System sensitivity and count rate performance are strongly dependent on ambient temperature while system resolution is not. The authors’ results indicate that it is important to assure stable ambient temperature to obtain reproducible results in imaging studies with APD-based PET scanners.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The evaluation of a 2D diode array in “magic phantom” for use in high dose rate brachytherapy pretreatment quality assurance

Purpose: High dose rate (HDR) brachytherapy is a treatment method that is used increasingly worldwide. The development of a sound quality assurance program for the verification of treatment deliveries can be challenging due to the high source activity utilized and the need for precise measurements of dwell positions and times. This paper describes the application of a novel phantom, based on a 2D 11 × 11 diode array detection system, named “magic phantom” (MPh), to accurately measure plan dwell positions and times, compare them directly to the treatment plan, determine errors in treatment delivery, and calculate absorbed dose. Methods: The magic phantom system was CT scanned and a 20 catheter plan was generated to simulate a nonspecific treatment scenario. This plan was delivered to the MPh and, using a custom developed software suite, the dwell positions and times were measured and compared to the plan. The original plan was also modified, with changes not disclosed to the primary authors, and measured again using the device and software to determine the modifications. A new metric, the “position–time gamma index,” was developed to quantify the quality of a treatment delivery when compared to the treatment plan. The MPh was evaluated to determine the minimum measurable dwell time and step size. The incorporation of the TG-43U1 formalism directly into the software allows for dose calculations to be made based on the measured plan. The estimated dose distributions calculated by the software were compared to the treatment plan and to calibrated EBT3 film, using the 2D gamma analysis method. Results: For the original plan, the magic phantom system was capable of measuring all dwell points and dwell times and the majority were found to be within 0.93 mm and 0.25 s, respectively, from the plan. By measuring the altered plan and comparing it to the unmodified treatment plan, the use of the position–time gamma index showed that all modifications made could be readily detected. The MPh was able to measure dwell times down to 0.067 ± 0.001 s and planned dwell positions separated by 1 mm. The dose calculation carried out by the MPh software was found to be in agreement with values calculated by the treatment planning system within 0.75%. Using the 2D gamma index, the dose map of the MPh plane and measured EBT3 were found to have a pass rate of over 95% when compared to the original plan. Conclusions: The application of this magic phantom quality assurance system to HDR brachytherapy has demonstrated promising ability to perform the verification of treatment plans, based upon the measured dwell positions and times. The introduction of the quantitative position–time gamma index allows for direct comparison of measured parameters against the plan and could be used prior to patient treatment to ensure accurate delivery.

60 APPLIED LIFE SCIENCES↗

SU-E-T-635: Process Mapping of Eye Plaque Brachytherapy

Purpose: To apply a risk-based assessment and analysis technique (AAPM TG 100) to eye plaque brachytherapy treatment of ocular melanoma. Methods: The role and responsibility of personnel involved in the eye plaque brachytherapy is defined for retinal specialist, radiation oncologist, nurse and medical physicist. The entire procedure was examined carefully. First, major processes were identified and then details for each major process were followed. Results: Seventy-one total potential modes were identified. Eight major processes (corresponding detailed number of modes) are patient consultation (2 modes), pretreatment tumor localization (11), treatment planning (13), seed ordering and calibration (10), eye plaque assembly (10), implantation (11), removal (11), and deconstruction (3), respectively. Half of the total modes (36 modes) are related to physicist while physicist is not involved in processes such as during the actual procedure of suturing and removing the plaque. Conclusion: Not only can failure modes arise from physicist-related procedures such as treatment planning and source activity calibration, but it can also exist in more clinical procedures by other medical staff. The improvement of the accurate communication for non-physicist-related clinical procedures could potentially be an approach to prevent human errors. More rigorous physics double check would reduce the error for physicist-related procedures. Eventually, based on this detailed process map, failure mode and effect analysis (FMEA) will identify top tiers of modes by ranking all possible modes with risk priority number (RPN). For those high risk modes, fault tree analysis (FTA) will provide possible preventive action plans.

61 RADIATION PROTECTION AND DOSIMETRY↗